rubber mixer used for sale

with flight case The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-152

with flight case The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-154

w/Apple Ipad w/D-Link DIR-850L Wireless Router The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-149

JF-Stoll Feeder VM 16 mixer with a capacity of 16 m³ for the preparation and distribution of feed rations for livestock. The machine is equipped with two mixing augers, a front belt/conveyor, a weighing system with JF indicator, a PTO drive, hydraulic connections and a hitch boom. It also has twin tires at the rear and side access. Visible ID Number: 171 012 1109. Double mixing screws, according to seller information Front belt/conveyor Weighing system with JF indicator PTO drive Hydraulic connections Hitch boom Access Ladder Auction-ID: A3-46134-41043

Pneumatic Paint Mixers – 2 pcs. Lot 115 comprising two mobile paint and liquid mixing units mounted on stainless-steel frames with caster wheels and push handles. Each unit is equipped with an air-driven mixer head, vertical shaft with three-blade impeller, pneumatic control assembly with pressure gauge, air filter/lubricator, compressed-air hose and transparent pneumatic tubing. Adjustable supports allow positioning over a container. Quantity: 2 units Drive: Pneumatic / compressed air Condition: Used Intended use: Mixing, homogenizing or agitating paints, coatings and similar liquids Approximate dimensions per unit: 1,100 × 750 × 1,250 mm Approximate weight: 55 kg per unit All descriptions are indicative only. Auction-ID: A1-50546-115

Battermixer with variable speed, 0 - 117 RPM, for mixing tempura batter., For products with higher viscosity., Mixer: 200 litres, Pump: Dgedong SCP-10422 vane pump, Power: 3 x 380V, 50Hz, 3kW, Dimensions: 1300 x 900 x 1800 mm, Weight: 200 kg

Concerns 2 concrete mixers; 1 x Lescha SM185 S; 1 x unknown Auction-ID: A1-47393-333

Rear unloading by means of a discharge belt that drains both sides. Auction-ID: A1-47393-80

Auction-ID: A1-50226-191

Stainless steel mixing tank for dressings and sauces, This mixing tank has an agitator from Parema Procestechniek (type PAR5L-25, built 2006) and was used as a dressing mixer. The tank has a hinged lid and a conical bottom with outlet, and stands on legs with castors., Agitator speed is set steplessly with the dial on the control cabinet, which houses a frequency inverter., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/parema-mixing-tank-with-agitator/, Type: Mixing tank with agitator, Speed: Stepless (frequency inverter), Tank: Hinged lid, conical bottom with outlet, Construction: Stainless steel, on legs with castors

Wolfking double shaft paddle mixer, type: TSM 400L, number: 56064, year of construction: 09/1993, 380 V, 3 Ph, 50 Hz, 20 A, 8 kW, volume: 400 liter, dimensions: 2000 mm x 1650 mm x 2700 mm. Including Danfotech lifter for 200 liter meat bins, type: CH300, serial number: 1599, year of construction: 1998, 400 V, 3 Ph, 50 Hz, 1.9 A, 0.75 kW, maximum capacity: 300 kg, lifting height: 1600 mm, total dimensions lifter: 1100 mm x 1200 mm x 2600 mm.

Auction-ID: A1-50060-97

Faresin TMRV 20.0 trailed feed mixer, year of construction 2008, with a capacity of approximately 20 m³. Features weighing device with Feed Navigator display, hydraulic controls/connections and 540 rpm PTO drive. Operating hydraulics 160 bar. Own weight approximately 9,000 kg and permissible total mass 14,000 kg. Equipped with Comer Industries gearbox. Not self-propelled. PTO speed: 540 rpm Operating hydraulics: 160 bar Empty weight: 9,000 kg Permissible total mass: 14,000 kg Permissible axle load: 6,300 × 2 daN Allowed support charge: 1.400 daN Permissible pulling force: 14,000 daN Vertical load: 2,000 daN Comer Industries gearbox available Auction-ID: A3-46138-22056

\" Faresin Leader 1700 Ecomix Self-Propelled Feed Mixer Wagon Manufacturer: Faresin Model: Leader 1700 Ecomix Year: 2016 Operating hours: Approximately 7,500 h Capacity: Approximately 17 m³ Equipment: Enclosed operator cab, loading/milling head, vertical mixing auger, weighing system and front/rear camera system Condition: Used, fair-to-good condition Approximate dimensions: 7,300 × 2,500 × 3,000 mm Approximate weight: 8,500 kg The feed mixer wagon shows paint wear, surface corrosion, scratches and normal working wear around the mixer body and loading equipment. The mixing auger, knives, cab, controls, weighing system and camera equipment appear substantially complete. \" Auction-ID: A7-50511-10

Ultrasonic homogenizer as good as new including two control units

A used twin-shaft mixer Manufacturer: Wiggert + Co GmbH Type: DWM 3375 Year of manufacture 2007 Capacity: 3375l dry filling / 2.25l hardened concrete output Already dismantled and stored ready for collection Location: West Germany Price on request Offers and prices are net ex location Subject to prior sale, Errors and/or misrepresentations reserved, without guarantee and/or warranty, sale is in ACTUAL condition