rubber machine used for sale

A roller straightening machine is offered for sale, straightening system: multi-roll system, adjustment: manual, integrated dial gauges, infeed table with roller guide, inspection possible by arrangement.

A precision roller straightening machine is offered. Working width: approx. 120mm, processing size: approx. 0.2-1.5mm, incl. control panel and digital displays, machine weight: approx. 450-600kg. Inspection possible by arrangement.

for cutting bread

water cutter

Wrapping machine for deposited or enrobed chocolate products with or without center-filling in double twist wrap. Speed of the machine - up to 400 pcs/min Product dimensions: - Length: 20 – 75 mm - Width: 13 – 29 mm - Height: 8 – 25 mm - Diameter at bottom: 13 – 25 mm With original feeding system. More details in the attached document

A roller straightening machine is offered. Working width: approx. 100-120mm, max. material thickness: approx. 0.1-1.0mm, multi-roll system, 4 integrated ARKU precision dial gauges, inspection is possible by arrangement.

Pile feeder F535 – Vacustar separating head 4 buckles 1 knife Batch counter A56 delivery

Thank you for your interest in our used machines, which we can offer you as follows: Probat L12 roaster in top condition - little used Manufacturer: Probat Model: L 12 batch roaster Year of construction: 1995 Heating medium: Gas Capacity: approx. 5 - 12 kg/batch Dimensions: 1700x1000x2000 mm Weight: approx. 580kg Details: - Batch size up to approx. 12 kg green coffee - The roaster is installed and can be viewed in operation - Last used to roast buckwheat or pumpkin seeds - Operating instructions available in German We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. from the location Germany; unpacked, without disassembly

1 of used high-speed film-only shrinkpacker - multi-packer, make KHS, type Innopack SP A-H, new 2013, operating direction right. Used to pack standard and sleek beverage cans as 2x2=4 3-lane, as well as 3x2=6, 4x2=8, 5x2=10 and 4x3=12 dual-lane. Siemens S7 controls, automatic film-splicing. Capacity upto 125 cycles/minute depending on product/configuration.

A precision roller straightening machine is offered. 18 straightening rollers, working width: approx. 120mm, processing size: approx. 0.2-2.0mm, machine weight: approx. 450-550kg. Inspection possible by arrangement.

Twelve dosing systems with volumetric progressive cavity pumps ViscoTec (Z and L versions) with collection hopper are available. Dosing volume range: 7.5ml/rev, flow rate range: 75ml/min-937.5ml/min, dosing accuracy: +/-1%, max. speed: 125rpm, max. dosing pressure: 30bar, max. inlet pressure: 10bar. Documentation available. An on-site inspection is possible.

Used master can filling machine 23000 CPHTechnical Specifications & Performance DataThis rotary can filling machine is engineered for carbonated soft drink applications and high-speed beverage production. With a robust rotary carousel and precise isobaric filling technology, it supports multiple aluminum can formats while maintaining excellent product integrity and carbonation retention. Manufactured by Tecno-Food Group, the Master Can configuration delivers reliable output for second hand and used bottling line projects in industrial packaging.Filling technology: Isobaric for carbonated beveragesNo. of valves: 50Series: 50Carousel pitch: 113 mmCarousel diameter: 1800 mmRotation: CounterclockwiseBase format speed: 23,000 can/h (0.5L)Maximum speed: 28,000 can/h (0.33L)Compatible formats: 0.33L, 0.5L cansFilling temperature: 18 °CCO2 content specification: 8Installed power: 20 kWMain po ...

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

tube diameter: 50,8 mm wall strength: 1,0 mm square edge steel: 50 x 50 x 1 mm round bar steel: 25 x 6 mm weight of the machine ca.: 46 Kg dimensions: 0,6 x 0,4 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Capsuling Machine GAI 4264D The GAI 4264D is a reliable, second hand capsuling solution engineered for precise application of capsules on glass bottles in demanding beverage production environments. Operating at up to 3000 bottles per hour with 4 dedicated heads, this model is well suited for wineries, breweries, distilleries, and diversified industrial packaging lines seeking to enhance presentation and product security. With format compatibility from 0.06 L miniatures to standard 0.75 L bottles, it integrates seamlessly into a used bottling line alongside rinsing, filling, capping, and labeling equipment. Technical Specifications & Performance Data Optimized for continuous operation, the GAI 4264D offers stable output and repeatable capsule placement for premium appearance and brand consistency. Manufacturer: GAI Model: 4264D Year of manufacture: 1996 Category: Capsuling machine O ...

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...

Used spiral kneader DIOSNA, type: SP 160 D -In bakery condition- - up to 160 kg dough / approx. 100 kg flour - Condition: Good, ready for immediate use The kneader is in good used condition and is immediately ready for use. Visits and test runs are possible by arrangement.

Used dough divider KEMPER, Type: Imperator CT -In bakery condition- The machine is still being refurbished. Visits and test runs are possible by arrangement.

Auction-ID: A1-45771-50

Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.

Bottle washer, MAG, 10 bottles / row, with 80 mm plastic cells, built in 1991

Viewing by appointment. Auction-ID: A1-40256-91

Storage capacity 5 liters. Auction-ID: A1-40256-118

Viewing by appointment Auction-ID: A1-40256-29

Bottle washer, make O+H, type: Contitact, for 12,300 fl/h, with 80 mm bottle cells, built 1987

Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985

Viewing by appointment. Auction-ID: A1-40256-50

Maximum label height 24cm Auction-ID: A1-46397-207

Auction-ID: A1-45979-161

Data sheet attached Auction-ID: A1-46813-47

Labeler, make Krones, type: Robusta 10-4-4, for ~20.000 bph, with 10 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,2 lt, 0,33 lt., 0,5 lt. and 0,7 lt. bottles, for body, shoulder and back label, with around safety casing, with Siemens S5 control, built 1997

Labeler, make Krones, type: Universella 18-8-6. with 2 glue pumps, conveyors, sets for 0,25 lt + 0,33 lt Gastro crown cap, 0,33 lt Longneck screw cap, 0,5 lt NRW brown crown cap, 0,5 lt NRW white screw cap, 0,7 lt GDB screw cap, 0,75 lt Gastro screw cap, built 1998.

GeneralUniversal Machining Centre with rotating viewing panel and Electronic handwheel; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical60/40/40 m/minWorking area 1Longitudinal2100 mmCross2100 mmVertical1250 mmMiscellaneousClamping SystemDIN 69872 Tool changerApplicationUniversal Type of magazineChain Type of gripperDouble gripper Universal milling head with controlled B-axisUniversal milling head with controlled B-axis SK 50 Continuously positioning universal milling head (B-axis) with integrated motor spindle for 5 axes positioning and simultaneous machining. - swivel angle: from horizontal position to max. 250° (70NC rotary tableType of Measuring system Direct measuring systemTable surface Ø 1700 mmCentre bore 50H6 mmCabineFull protection cabin4. Axes (swivelling r ...

Labeler, make Krones, type: Bonamatic 1.240-20-4-4, with 20 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,7 lt. bottles, with 3 aggregates, for body, shoulder and back label, as too for neck ring and foot label, with cam-bottom adjustment, with around safety casing, with Siemens S5 control, built 1990

Labeler, make Krones, type: Prontomatic 720-21-8-8-110 RM, for 0,7 lt GdB bottle, for 24.000 bph, for body-, shoulder- and back label, right -> left counter clockwise, with 2 heated glue pumps, built 1997

Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003

GeneralUniversal Machining Centre; Control: 3D-Control Heidenhain TNC 640 Technical DataRapid traverse longitudinal/transverse/vertical60/60/60 m/minFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minWorking area 1Longitudinal1600 mmCross1600 mmVertical1100 mmTool changerApplicationHorizontal Type of magazineWheel Type of gripperDouble gripper Number of tools60 MiscellaneousClamping SystemDIN 69872 NC rotary tableType of Measuring system Direct measuring system4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 15 rpmDistance between T-Slots 125 mmNumber of Slots 9Slot width 18 mmMaximum load (table centre) 4500 KgCentre bore 50H6 mmTable surface Ø 1600 x 1250 mmChip removal2 worm conveyors in the machine bed convey into a chip conveyor (scraper type conveyor), with interval control, placed at right angles. discharge height: 950 mm / 37.4 in width: 580 ...

x-travel:600 mm y-travel:500 mm z-travel:450 mm weight of the machine ca.:3,5 t

Labeler, make Krones, type: Variomatic, for 12.000 bph, adjust to 0,5 lt. and 0,75 lt. bottles, with 3 aggregates, for Body- shoulder and back label, as too with additional label dispenser for self-adhesive labels, with around safety casing, built-on control cabinet, year of origin: 1998

Labeller, make Krones, type: Universella 600-15-8-6-130, 2 aggregates for cold glue label at body, shoulder, back; Videojet dating built 1995

Siemens X-ray system type Multix / Vertix Swing with generator POLYDOROS IT/S in good condition

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Eyelet machine Hang 87 F, machine number 38960, 3 eyelet heads, eyelet diameter 5.5 mm, inner diameter 5 mm, waste suction device, in good condition, immediately available

M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm

bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN