rubber injection used for sale

Injection moulding machine Krauss Maffei KM 125-390 C2 BJ 2004

Injection moulding machine Arburg 470s 1100/290 YOC 2017 2 K

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003

Injection moulding machine Arburg 570C 2000/150 60 2 K BJ 2007

Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.

Injection moulding machine Netstal synergy 600/110 BJ 2001

Vertical injection moulding machine Arburg 900 T 800/150 BJ 2001

Injection moulding machine Arburg 320C 600/250 BJ 2002

Injection moulding machine Arburg 470C 1600/625 Bj 1995

Stretch blow moulding machine from EtekISBM Line = Injection stretch blow moulding Stretch blow moulding machine for disposable PET bottles made from PET preform blanksStretch blow moulding machine for production in rotary transfer processManufacturer: ETEK / GF-Industries Type Supra 800 sv 1Serial number: 22000225Year of construction: 2012Power: 90 kWNet connection: 400 volts, 50 HzNet weight approx. 6000 kgas good as new; used

Two complete injection molding plants with two Husky injection molding machines, four complete moulds with all-metal separator, Motan gravimetric mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. To ...

Key data: 4000 kN, 80 mm

Machine + Viper Robot 12

a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.

Brand & Model: SANDRETTO Serie NS - 230 T Reference: NS 860/2300 Condition: Very good Technical Specifications: Clamping force: 230 T / 2300 KN Tie bar spacing: 585 x 585 mm Platen dimensions: 860 x 860 mm Mold thickness (Min/Max): 210 - 630 mm Opening stroke: 580 mm Injection volume: 475 cm³ Injection pressure: 1876 bar Screw diameter: 50 mm L/D ratio: 20 Dimensions & Weight: Weight: 10 500 kg

Key data: 1500 , 50

SANDRETTO serie 8 612/150 with SEF 90 Clamping force : 150 T Distance between tie bar : 460 x 460 mm Mould thickness min / max : 155 - 560 mm Opening strocke : 500 mm Injectable volume : 392 cm3 Pressure on material : 1560 bars Screw diameter : 50 mm Weight : 7000 kg Dimensions : 6,36 x 2,08 x 1,50 m

SANDRETTO serie 8 790/240 Clamping force : 200 T Distance between tie bar : 570 x 570 mm Platen dimensions : 860 x 860 mm Mould thickness min / max : 210 - 730 mm Opening strocke : 630 mm Injectable volume : 546 cm3 Pressure on material : 1450 bars Screw diameter : 55 mm Weight : 11 500 kg Dimensions : 7,68 x 2,35 x 1,78 m

Sandretto serie 8 MEGA T 1000 année 1996 Force de fermeture : 1000 T Diamètre vis d'injection : 150 mm Volume injectable : 11296 cm3 Epaisseur moule min/max : 450mm/1350 mm Course plateau mobile : 1350 mm Dimensions des plateaux : 1820 x 1820 mm Passage entre les colonnes : 1230 x 1230 mm Diamètre des colonnes : 220 mm Quantité d'huile contenue : 1500 L Dimensions : 15,1 x 3,15 x 2,81 m

SANDRETTO serie 8 430/95 Clamping force : 95 T Distance between tie bar : 370 X 370 mm Platen dimensions : 560x 560 mm Mould thickness min / max : 100 - 460 mm Opening stroke : 410 mm Injectable volume : 286 cm3 Pressure on material : 1500 bars Screw diameter : 45 mm Weight : 5 400 kg Dimensions : 5,67 x 2,03 x 1,32 m

Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible.

Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general ind ...

Injection molding machine

Injection molding machine

Key data: 1100 , 40

Machine de moulage par injection ENGEL VC330 -110T Référence : VC 330 /110 Force de fermeture : 110 T Année de fabrication : 2004 Nombre d'heures de travail : 84000 heures Diamètre de la vis : 40 mm Volume injectable maximum : 251 cm3 Epaisseur du moule : mini : 300 mm Poids : 7300 kg Dimensions : 4,36m x 1,48m x 2,04m 4,36 m x 1,48 m x 2,04 m

BILLION 200 T série HERCULE H 780/200 Force de serrage : 200 T - 2000 KN Groupe d'injection : H 780 Diamètre vis. : 50 mm Distance entre colonnes : 500 x 500 mm Dimensions des plateaux : 760 x 760 mm Epaisseur mini/maxi du moule : 280 - 580 mm Course d'ouverture : 560 mm Volume injecté : 422 cm3 Pression matière : 1843 bars Dimensions : 7,1x 2,1 x 2,6 m Poids : 14 000 kg

Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308

Injection molding machine Krauss Maffei KM 800-4300 MX BJ 2006

Key data: 1100 kN, 254 g/PS, 45 mm

Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine: · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 254 cm3. · Screw diameter: 45 mm. · Maximum distance between plates: 800 mm. · Control: IQT44. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for use.

Key data: 1100 kN, 99 g/PS, 30 mm

Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 99 cm3. · Screw diameter: 30 mm. · Maximum distance between plates: 620 mm. · Control: IQT33. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for operation.

Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible.

Injection molding machine Krauss Maffei KM 650-4300 CX BJ 2010

Key data: 2000 kN, 562 g/PS, 55 mm

Specification Injection Moulding Machine Engel VC 1350/200 Tech General data Clamping force: 200 t Year of Make: 2007 Injection unit weight: 562 g Injection Unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 cm³ Injection unit weight: 562 g Tool clamping unit 200/... Clamping force: 200 t Dimensions of the tool plates: 860 x 570 mm Output force: 80 kN Tool height: 400 mm Opening travel: 750 mm Maximum panel spacing: 1150 mm Discharge stroke: 180 mm Other Specifications Weight: 14200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Year of Make: 2007 Equipment 2 x hydraulic core on the moving plate Pneumatic valve Integrated robot 8 zones for hot runners Rotameter 8-fold

Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible.

An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible.

CLAMPING FORCE: 150TON PLATEN SIZES: 1295 X 990 DBTB: ROTARY TABLE 1520 MIN MOULD HEIGHT: 300 MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 700MM SCREW DIAMETER: 40MM INJECTION PRESSURE: 2678BAR STROKE VOLUME: 283CM3 SHOT WEIGHT (P/S): 257GR CONTROLS: UNILOG B6 MOTOR: 22KW HEATING CAPACITY: 12.1KW SCREW DRIVE: HYDRAULIC CORE PULLING: 4 AIR VALVES: 1 HOT RUNNER: 8 ZONE INTERGRATED ADDITIONAL: HORIZONAL INJECTION VERTICAL CLAMP

Clamping force: 220kN, min. mould height: 200mm, max. opening stroke: 200mm, max. platen distance: 400mm, ejector stroke: 80mm, machine dimensions X/Y/Z: approx. 2600mm/800mm/1600mm, weight: approx. 760kg. An on-site inspection is possible.

ENGEL ES 1350/350 HL injection moulding machine was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameters. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system, operating at a maximum force of 350 tonnes, guarantees high repeatability and quality of the manufactured parts. Once the production process is complete, the robot automatically transfers the finished products from the workspace to a conveyor belt. The ES 1350/350 HL injection moulding machine weighs 5000 kg. Technical specifications of the ENGEL ES 1350/350 HL injection moulding machine - CNC controller: ENGEL - maximum m ...

Key data: 600 kN, 132 g/PS, 35 mm

Arburg 320C-600-250 Injection Moulding Machine (241) Ability to work vertically Number: 241 Availability: in stock Year of production: 2008 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Clamping force [kN]: 600 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. mould height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 74753 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Socket: Yes Core String: 1x

2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

Key data: 220 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 55A injection moulding machine, fitted with the Procan CT Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on reques ...

Ref. no.: 18255 Manufacturer: ENGEL Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ Advanta ...

4 x Demag injection moulding machines Demag 80 to BJ 2005 Demag 420 to BJ 2003 Demag 420 to BJ 2005 Demag 420 to BJ 2008

Injection moulding machine Engel e-motion 2440/380 T BJ 2008

2 x Husky HL500RS80 2016 injection moulding machines

Injection moulding machine Krauss Maffei KM 50/90 C2 BJ 2001

Presse à injecter ENGEL VC 200/80 Année : 2005 Nombre d’heures : 79 000 h Force de fermeture : 80 T Course d'ouverture : 450 mm Epaisseur moule min : 250 mm Dimensions des plateaux : 670 x 600 mm Diamètre bagues de centrage : 125 mm diamètre de la vis : 35 mm Volume injectable : 154 cm3 COMMANDE : CC200 1 noyau hydraulique interface robot : Euromap 67 DONNÉES GÉNÉRALES : Puissance de chauffage installée : 6,8 kW Puissance d'entraînement de la pompe : 15 kW Puissance totale connectée : moteur + chauffage Poids total : 5.200 kg Dimensions totales L x l x H : 4,0 x 1,4 x 2,0 m

2 x Injection Molding Machines Manufacturer. Arburg Type : 270S-250-60 BJ 1996

Netstal Elion 800 injection moulding machine with Wittmann Handling Primus The machine is fully functional and has only 6500 operating hours

Injection moulding machine Arburg 470C 2000-675 BJ 2007

Injection moulding machine Krauss Maffei KM 300-1900 C2 BJ 2000