rubber extruder used for sale

MADE directly from the manufacturer with PREMIUM quality stock items Description: -Conveyor belt / conveyor belt made of rubber for many applications in industry, agriculture and construction industry - new, coated on both sides, open, 2-ply reinforced bottom cover made of PVC, with mounted metal connectors made of stainless steel to the endless connect -Dimensions: 9.152 mm x width 600 mm x thickness length approx. 6.5 mm, surface with tunnels. -With 15 piece rubber studs, 50 mm high, 600 mm long, distance approx. 610 mm,. On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Statable VAT! Not is your desired size? No problem! We customize for you! More conveyor belts, drive belt and flat belt in all other sizes available immediately ...

Einwellenschredder used in the tire recycling as a rubber mill. 2 motors with each 200 kW. Performance 4 t / h truck tyres.

Stock number: U2257 Used stainless steel filter press by Seitz (Germany) type Orion model OF100/250. Filter press has 41 plates with dimensions 1000 mm x 1000 mm + 41 frames with depth 40 mm and 2 end plates. It gives surface of filtration 82 m2 and 1640 l cake volume. Filter press is opened and closed hydraulically by piston and hydraulic device driven by 2.2 kW el. motor. Below the plates there is mounted stainless steel collection tank with central screw conveyer. Press is equipped with control panel, pipes, two manometers, rubber sealings and screw type pump, driving the screw inside the collection tank. Last time press had been working in beer production.

1. Massaging arm for tumbler Vakona IP 100 2. Scraper rubber with FDA for mixing and massage arm for Vakona IP 100 Item No. 100851 Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Machine: Chamber filter press Type: UM 1200 x 1200 Execution: filter press Filter plate format: 1200 x 1200 Year of construction: 1977 refurbished 2017 Number of plates: Filter plates: 43 in PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 1560 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Safety device: E.g. photocell etc. optionally on request Buy or rent: Visits of facilities in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.

Description: Extruder Plastmachines extrusion machine PME 80/35 Manufacturer: Plastmachines extrusion type: PME 80/35 Year of construction: 2004 Type of offer: second-hand machine Technical data: Plastmachines extrusion machine type: PME 80/35 control:-year: 2004 injection unit screw size mm: 80 additional information 75 KW power 250-300 kg / h degassing system complete granulation plant heating tee Kuehlsiepsystem 75 KW power 250-300 kg / h degassing complete granulating heating tea cooling system siep

Description: Extruder Müller ELK 60-28 Manufacturer: Müller Type: ELK 60-28 Year of construction: 1995 Condition: very good Type of offer: second-hand machine Location: D - North Rhine-Westphalia Technical data: Müller extruder machine 40,000 h Runhour type: ELK 60-28, profile extruder control:-year: 1995 injection unit screw diameter mm: 60 other ELK 60-28 d 57 KW

new compoundng extruders

- Working width 1000 mm - min. workpiece length 470 mm - min. / max. passage height 2 / 160 mm - feed speed infinitely variable 5 - 25 m/min. 1. Grinding unit: - rubberized and grooved contact roller 80 sh or steel roller motor 22 kW / 400 V - calibration roller FI 190 mm - grinding belt speed 21 m/s2. Grinding unit - combination unit roller 70 sh / shoe - motor 15 kW / 400 V - rubberized and grooved contact roller FI 160 mm - insert control inlet / outlet - grinding belt speed 18 m/s - motor feed 1.5 kW - motor height adjustment 0.37 kW - total power 28 kW - grinding belt dimension 1030 x 2200 mm - compressed air 8 bar - air consumption 17 m3/h - automatic carpet centering - digital display with automatic workpiece thickness adjustment - automatic star triangle circuit - pneumatic belt tension - overthickness fuse with Self-triggering - Ammeter for monitoring chip removal - Instant stop ...

Koelle edge planing machine model FKF 51 is in good condition, ready to use. L x W x H = 3000 mm x 700 mm x 950 mm Weight approx. 200 kg Built in 1982 Engine No. 390 The rubber rings at the pressure rollers should be times replaced. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

COMPLETE PANCAKE LINE for the production of plain, cherry, apple, pineap-ple, etc. pancakes Very little used, only 3 weeks in test production After that the management decided to invest more in existing pizza line and cancelled new products pancakes Pancakes 32g ø 80mm (According to pre-owner) â?¢ SCHENK T4096-5035-8 V1.0 contact fryer For baking of dough or meat products competely stainless steel, electrical heating, total length 11 m turning station, complete with 2 DáBáR TSA 800 fat spraying units 22 noz-zles, only used for testing purposes, like new â?¢ ALIMEC DOSATRICE dosage unit Closed for dough with 22 dosing heads with a max. dosing weight of 36 g per dosing head, only used for testing purposes, like new â?¢ MONDINI DTT/LC80 Dosing line for fruit pieces, 22 dosing heads, only used for testing purposes, like new â?¢ 2 DOMINO transport trolley ...

Exchange aggregate-gene set with engine and generator overhauled on basic frames Scope: -AT crank case -AT crankshaft including new storage -Pistons Squisch (new variant) -Running jacks with coca striping ring (new variant) -AT cylinder heads -AT pleuelbars including storage -Abgasturbolader overhauled with conversion jet ring -Oil pump new -Charge air cooler repaired -Throttle -Gas mixer repaired -Spark plugs new -Compensators new -Exhaust exacensers new -Valve pestle new -Sealing set engine new -Rotary vibration absorbers new -UPF filter crank room ventilation new -Air filters new -Rubber element for clutch new -Generator Marelli MJB 400 repaired Pfandwerte on request: The deposit value depends on the scope of delivery and the condition of the parts returned.

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

Stock # U2333-5 Used cutting mill by Alpine model B32/40 RO. Mill has dimensions of inlet into cutting chamber 400 mm x 355 mm. Rotor is equipped with three knives and has diameter 315 mm x length 400 mm. Working rotation of rotor up to 700 rpm. Mill has 3 static knives. Bottom discharge through screen with mesh about 12 mm. Rotor is belt driven by el. motor with power 18.5 kW, 1500 rpm, 400 V, 50 hz. Mill has stainless steel feeding hopper with inlet dimensions: 390 mm x 240 mm. Mill is equipped with two belt conveyers. First feeding material into mill, has width of belt 250 mm, with baffles each 675 mm. Working length of conveyer 290 cm. Top of conveyer is covered with insulation. Second conveyer is for transport product from mill discharge - also has working width 250 mm, with baffles each 675 mm. Working length 200 cm. Mill has also dust filter with exhaust fan and electric contro ...

Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!

Autoclave, Autoclav, Impregnation Chamber Overpressure Chamber Used Type: HP 2166-68 Volume approx. 6.8 m3 Length inside approx. 5 m Diameter inside approx. 1.5 m Large door on the end side approx. 1.5 m in diameter Max temperature: 140°C Pressure max 10 bar Dimensions outside approx.: 5600 x 1800 x 2500 mm 6 pieces in stock The autoclaves are used for sterilization of equipment, tools and materials. They can be used in the chemical industry, medicine and also in the processing industry for vulcanizing tires and rubber products or for printing impregnation. The system is completed according to your wishes by our own special machine construction. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

1 Qty.1 Second-hand brush grinding machine Mfc.: Gurutzpe Type: Brushes cutting machine Built: 1975 Model: Max. Q800x2500 2 Qty. 1 Second-hand Rubber Grinding Machine Mfc.: Churchill Type: PCH 24" X 96" Built: 1957 Model: Max. Q600x2400

System: Mobile dewatering system on trailer Type: Chamber filter press 500 x 500 Execution: filter press Year of constr.: 2017 refurbished Number of plates: 5 + head and end plate Filter plates: PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 130 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Pump technology: In consultation System: The system is delivered as turnkey dewatering equipment ready to plug. Visit: the systems in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.

Mobile vacuum station for use on a degassing opening on the extruder or tool as well as for support in vacuum profile forming - a water ring vacuum pump VG-55 mounted on a welded and painted steel base frame with maximum vacuum Volume of 55m3/h, with kpl. connected supply and cooling system - Vacuum connection: 1x connection pipe with internal thread R1" or GEKA coupling and hydraulic hose 2TE DN25 length 700mm - a VA service water separator and storage tank with fresh water connection R1/2", level switch and drain tap for easier daily cleanse - a cooling coil built into the separation tank and removable cooling coil made of hde-ribbed tube - Water drain on water tank: R1 1/4" - Cooling water connection to cooling coil: R3/8" - an additional vacuum separation container made of steel (hot-dip galvanized) in front of a vacuum pump for separation (diffusion) of the  ...

Laminating line for pizza dough consisting of: Laminating line for pizza dough, consisting of: Extruder 3 x pressure roller Cross roller Calibrating unit Folding station 2. folding station Satellite head Flour shakers Cross roller Cutting station Transfer paper Manual rewinding

Complete extrusion line with support for sale, dispense, extrude, granulate and SAG (complete pictures in the PDF). Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, new price from 690.000 € Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Also here: Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote

Complete Printshop from one place in germany: Manufacturer: Heidelberg Model: GTO Year of construction: 87 Size: 32 x 46 cm Totalizator status: approx. 29,450,894 Availability: in July 2021 Manual double sheet control AntiqueStatic Simco Powder device WEKO Chromed plate cylinder 2 display trolleys Sticks of paper Rubber blankets 2 clamping bars Page marks + upright + left for small formats Support plate Bacher Controll- 1 Bacher register punch with assembly and fitting strips Plus version complete numbering and imprinting device incl. 3 numbering machines + accessories Perforation device: 2 perforation and creasing insert blocks Bracket with three leaf springs Dampening system Varn Kompac III GT 46 Year: December 9, 1994 POLAR CUTTING MACHINE High-performance high-speed cutter Manufacturer: PolarMohr Model: 76 EM Year: 1993 Availabile: end of July 20 ...

Extruder with vacuum vertical prepress LVP-35, gearbox overhauled in 2011, screw wings equipped with carbide. Press equipped with DC motor 60 kW (can be converted to 55 kW three-phase motor at an additional cost). Machine is functionally tested and comes with some spare parts.

GLUE SPREADER type OSAMA S2R 400 . NEW Year 2016 CE : YES Volt. 400 / 50 max. working width mm. 400 max. working height mm.100 n.02 rubber rollers

Cerutti coating machine for Paper, films and Aluminium Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporation (water). This process is repeated in lin ...

Omam second hand line width 2000 mm for PP corrugated sheet extrusion Plastic • Omam extruder diameter 150 mm / 30 D • Main Extruder motor: Siemens DC motor 410 kW • 2-ways continuous filter change FCF 120-2V complete with hydraulic power unit • Melt pump Alfatech AT80 with motor and control panel • Omipa T-Die 2180 mm wide with thickness 5mm and pitch 5,9 mm • Nr.02 T-Dies 3mm thick / 4mm pitch • Caliber with anodized aluminum plates, complete with 5,5 Kw air blades and 3 vacuum pumps 1,1 Kw (x1), 2,2 Kw (x2) • Take-off roller – equipped with 8 rolls, 330 mm diameter, rubber coated, 5 Kw motor • Oven: 2500 mm wide, power 48 kw, infrared, with control unit • Ferrarini & Benelli Corona treatment complete with GTS8 15Khz generator and 2 fans for ozone extraction (0,25hp) • Cooling unit with 6 fans • Take off rollers - 4 rolls, 330mm diameter, rubber coated, 5 Kw ...

Extruder with vacuum pre-press LVP-35, gearbox refurbished in 2011, extrusion helix plated with hard metal bits. Press is equipped with a 60 kW DC drive (can be replaced by a 55 kW AC drive at anextra charge). The machine is test-run and comes with spare parts.

calibrating sanding machine SCM SANDYA 16S - 135 second hand machine carpet in rubber max. working width mm. 1350 machine composed by 2 belts : 1° belt : roller in rubber diam. mm.200 . shore 80 2° belt : combined roller in rubber diam. mm.160 . shore 35 + electronic pad belts size mm. 2620 x 1370 motor power Hp 20 volt. 380/50

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

Key data: 4

Renner piston compressor RIKO 700/270 ST KT Product name: Piston compressor Model: RIKO 700/270 ST-KT Manufacturer: RENNER Device Number: 1008851 Product number: 04837 Year of construction: 2021 Condition: As good as new technical details: Effective delivery quantity: 570 Container capacity: 270 Ltr. Intake capacity: 700 l/min Maximum pressure: 10 bar Sound pressure level LpA: 78 dB(A) Cylinders/steps: 2/2 Weight: 227 kg Temperature range: -10°C to +80°C 1 x pressure gauge tank pressure automatic pressure switch 1 x manual condensate drain by ball valve incl. refrigeration compressed air dryer RKT +0035 (refrigerant 134a) incl. automatic steam trap D03 for the compressor Stand-standing unit with rubber feet Engine data: Motor power: 4.0 KW Power supply: 400 V / 50 Hz Speed: 940 rpm Transport dimensions: L x W x H: 1,490 mm x 506 mm x 1,323  ...

Pump vacuum cleaner with integrated submersible pump that continuously pumps absorbed liquids out of the container, RCDs in the mains connection cable, special filter bags, application-oriented accessories. The pump can be completely removed and the container closed, so this industrial vacuum cleaner can also be used as a normal wet-dry vacuum cleaner. Areas of application: Suction/suction of large quantities of liquid, use in floods, use in flat roof renovation, cleaning of garden ponds and pool facilities. SCOPE OF DELIVERY Including accessory set pump vacuum cleaner. Additional filter 1 x FSS 1200 (foam) Filter bag 1 x FSN 80 1 x Suction hose Ø 35 mm x 5 m 1 x Drain hose Ø 33 mm x 5 m 1 x Handle tube plastic with secondary air slider 2 x Suction pipe plastic (each 50 cm) 1 x Aluminium professional floor nozzle 45 with rubber and briste strips EQUIPMENT Main filter FPP ...

Technical data: - working width 300 mm- glue roller diameter 140 mm- rubber hardness glue roller 70 shor speed 20 m/min.- Power 0.25 kW- voltage 400 V, 50 Hz- quick change device of the glue roller glue container and rolls made of stainless steel- CE Conformity dimensions: 800 x 600 x 500 mm- Weight: 60 kg

5000 l, angular, inside rubberized, RW, see picture

The CE20 belongs to the series of our electrically operated high-pressure machines with a pressure of 200 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- CE20-200 50Hz 200 bar 38 l/min. CE20-200 60Hz 170 bar 45 l/min.  ...

Technical data: - working width 300 mm- 2 x glue roller diameter 140 mm- rubber hardness glue roller 70 shor speed 20 m/min.- Power 2 x 0.25 kW- voltage 400 V, 50 Hz- quick change device of the glue roller glue container and rollers made of stainless steel- mechanical height adjustment of the upper glue application roller- mechanic digital display of the passage height- CE conformity

STAINLESS STEEL, Dimensions: approx. 1000 X 800 X 800 mm (H X W X D), The plant was connected in series one extruder.

The CE100 series is an electrically driven high-pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 CE100-1000-42 CE100-1400-28 CE100-2050-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Weight: 2000 kg Includes standard accessories.

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, new price 150,000 € Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

This machine is particularly suitable for the processing of electric wastes with PVC and rubber. Hole Guide for small diameter from 1 to 10 mm. Quick clamping diameter setting for the large diameter. Adjustable pressure roll continuously over a quick Collet with one hand adjustable. Holes on the base plate to the fasten the machine on a table or work bench.

The CE125 series is an electrically driven high-pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 90 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Includes standard accessories.

This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min

The CE150 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Drive motor power: 90 kW (50Hz) / 110 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.

MAR VM8-DT closing machine for rubber bungs, 8 head, with automatic bung feeder with vibrating bowl, suitable for containers 10 to 80mm diameter and from 30 to 180mm high. Includes format parts for 20mm bungs. Output up to 400 per minute. Machine dimensions approx 2000 x 900mm, height approx 1700mm. Weight approx. 960kg. Electrics 220/380V 50Hz.

6000 l, steel rubberized, ruehrwerk and pump (2 pieces) Next: 6000 l, PP, pump, ruehrwerk 5500 l, steel rubberized, Ruehrwerk 6000 l insulated, ruehrwerk, heater 6000 l insulated, weighing attachment see pictures

QTY 1 x Berstorff Auma, Original year of manufacture 1972, Main Drum 1700mm wide x 1000mm dia, Aux drums 1700mm x 600mm dia, Steam heated, currently with 1660mm wide rubber coated woven steel belt, max pressure 192 Bar (approx 3000psi), 2 speed gearbox, Modern 5.5kW DC variable speed motor. Including let off and wind up units. Complete and in good working condition.

The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General Specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.

Capacity: 4800 kg Lifting height: 3850 mm Free lift: 1590 mm Battery: 80 V, 805 Ah Operating time: 5 h Lateral valve adjustment weight: 4800 kg Tyres: 4 wheel, solid rubber Length: 3100 mm Width: 1500 mm Height: 2700 mm

6000 l, Niro, insulated, weighing, Further: 20000l insulated, inside rubberized, RW 6000 l Niro insulated

The machines of the CD25 series are compact high-pressure cleaners from 170 to 500 bar and a volume flow of 17 to 42 l/min. The pump is powered by a 3-cylinder, water-cooled Kubota diesel engine. The sturdy frame is made of stainless steel for long durability and corrosion resistance. The powder coating ensures the very beautiful appearance. The machine has very compact dimensions of 1200mm x 800mm. This corresponds to the same size as the well-known EURO pallet. The frame is fixed on 4 large rubber feet. The high-pressure machine is also equipped with forklift pockets and a central lifting eyelet. This allows for very easy transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD25-170 170 bar 42 Lpm CD25-250 250 bar 32 Lpm CD25-350 350 bar 23 Lpm CD25-400 400 bar 21 Lpm CD25-500 500  ...

Price 3900 Eur (EXW Jonava, Lithuania) Type SBR-250 Working width 230 mm Useful working thickness 100 mm Spreading roller diametre 150 mm Feed speed 28m.min Motor power 0,18 KW Height of working surface 790 mm Additional accessories are available: In-feed stainless steel idle rollers transfer € 550,00 net Out-feed PVC idle rollers transfer € 580,00 net Variable speed with inverter (5/25 mt./min.) € 750,00 net 1 set of two spare rubber rollers € 1,890,00 net Made in Italy Weight 90 kg CE