rubber extruder used for sale

General SKU359W977 MakeLeistritz TypeZSE 27 HP-PH-40D Mach.No.3659 Year of construction2007 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) General LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra Specificationsthis unit comes with:- control cabinet.- 3x temperature control units.- extruder barrel liftPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedNew arrivalsDouble screw extrudersLeistritzIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Agro ...

General SKU435U1404 LocationBarneveld MakeKrupp werner &: pfleiderer Sizes Screw diameter25 mm Main Features Motor21 KW Inlet diameter80 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Number of hours32473 Screw diameter25 mm L/D20 Co-rotatingcheck Number of heating zones:7 Water coolingcheck Screw speed200-1200 rpm Feeding with hoppercheck Feeding with metering screwbrabander. 0,37kW, 119rpm, screw dia 35mm Capacity100 kg/h MaterialNitriding steel 1.8519 General TypeZSK 25 P8 2E WLE Mach.No.20474223 Year of construction2000 With switchgear(as is) Floorspace2,1 x 0,8 m Total height1,6 m Weight1100 kgPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersWerner & PfleidererIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & pol ...

General SKU354T1381 MakeHosokawa Bepex GmbH LocationBarneveld TypeBX 200 T Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) With jacketcheck Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) General No.18227-01 Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace1,3x1,05 m Total height1,75 m Weight680 kgGeneric medicinesPlastic & polymersMixing extrudersCatalysts & fillersCosmeticsSolid pharmaceuticsDyes & pigmentsM ...

General SKU269X293 MakeCollin LocationBarneveld CEcheck TypeTeach-line E20T and BL50T Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C MaterialStainless steel With jacketcheck General No.9120 3914 Year of construction2014 With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min,&:nbsp:winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm&:nbsp:Powdered foodsGeneric medicinesSingle screw extrudersStarchAgrochemicalsDetergent & surf.CosmeticsLubr ...

General SKUR1061 LocationBarneveld MakeKrupp Werner &: Pfleider Sizes Screw diameter45 mm Main Features Motor51 KW Inlet diameter50 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter45 mm L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motorcheck With variable speed drivecheck Screw speedmax 600 rpm Feeding with hopper(3x) Feeding with metering screwcheck Exchangeable segmentscheck Used oncomposite Capacityapprox. 500 kg/h MaterialStainless steel 1.2379 (X153 CrMoV12) General TypeZSK 50 P8.15E Mach.No.20474395 Year of construction2000 With switchgear(as is) (2x) Sizes switchgear0,9x0,6x2,1 M (1x) 1,6x0,6x2,1 M (1x) Floorspace4,7 x 1,1 m Total height1,5 m Weight4000 kg Extra SpecificationsWith twin screw side entry Werner &:amp: Pfleiderer ZS-B 58with 3 x K-tron do ...

General SKU292M349 MakeBerstorff TypeZE-25 Mach.No.EO 0324/88 Year of construction1989 Main Features Motor6 KW Inlet diameter25 mm L/D20 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameterdia. 25x500mm L/D20 Number of heating zones:3 Electric heatingcheck Water coolingcheck DC-motor6 KW, 200 Volt Screw speed0-450 Rpm Feeding with hoppercheck Feeding with metering screwcheck General LocationBarneveld With switchgear(as is) Sizes switchgear0,8x1,0x2,0 M Floorspace1,8x0,8 M Total height1,1 M Weight450 KG Extra Specificationsincl. tempereer eenheid 3,5 KW, 380 Volt. THERE ARE NO SCREWS WITH THIS MACHINE !Powdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersBerstorffIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndus ...

General SKU300P748 LocationBarneveld CEcheck Main Features Motor3 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours567 Screw diameter50mm L/D20 Co-rotatingcheck Number of heating zones:1 Steam heatingcheck Water coolingcheck AC-motor3,0 KW, 230/400 Volt With variable speed drivecheck Number of temperature controllers:1 Used onicecream MaterialStainless steel General MakeAPV Baker Industrial Extruder Division Ltd (UK) Mach.No.WEF960037 724/1 Year of construction1996 With switchgearcheck Floorspace2,6x1,2 M Total height1,6 M Weight1100 KG Technical specs Extra informationscrews form stainless steelPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersAPV ProductsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries >  ...

General SKU011C013 LocationBarneveld MakeLeistritz Sizes Screw diameter110 mm Main Features Motor110 KW Inlet diameter110 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter110 mm L/D20 Counter rotatingcheck Number of heating zones:4 Electric heatingcheck DC-motor10-110 KW General TypeZSE-110 Mach.No.86.02.1822 Year of construction1986 With switchgear(as is) Sizes switchgear120 x 70 x 230 cm Floorspace4,7 x 1,4 m Total height2,2 mPowdered foodsAgrochemicalsPlastic & polymersDiscountCosmeticsAnimal feedOther feedDouble screw extrudersLeistritzIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersDiscountIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedExtruders > Double screw extrudersBrand > Leistr ...

General SKU304P676 MakeAPV Chemical Machinery Ltd TypePGX 30 Mach.No.800471 Year of construction1989 Main Features Motor4 KW Inlet diameter30 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Number of hours19187 Screw diameter30mm L/D10 Co-rotatingcheck Water coolingcheck AC-motor4,0 KW With variable speed drivecheck Screw speed(161rpm) Feeding with hopperdia.340mm x400mm Feeding with metering screwK-Tron T-22 twinscrew, Motor feeder 0,55 KW, Motor agitator 0,18 KW Number of temperature controllers:1 Capacity30 KG/Hr MaterialStainless steel 1.2379 (X153 CrMoV12), Stainless steel General LocationBarneveld With switchgearcheck Floorspace1,8x0,8 M Total height2,2 M Extra Specificationswith extrudermold dia.1mmPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedNew arrivalsDouble screw extrudersAPV ProductsIn ...

General SKUR1123 MakeWLS Gabler Maschinenbau KG (D) LocationBarneveld TypeDE 100/100 Main Features Motor18.5 KW Inlet diameter100 mm L/D9 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter100mm L/D9.4 Co-rotatingcheck Number of heating zones:2 AC-motor18,5 kW 380/660 Volt Feeding with hoppercheck MaterialStainless steel General No.12482 Year of construction1992 With switchgear(as is) Floorspace2,5x1,3 M Total height1,7 M Weight2150 Kg Extra SpecificationsIncluding 1 piece Single Temperiertechnik heating units STW 150 / 1-9-20-K1S 9 kW 400 Voltincluding 2 spare screwsPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersWLS GablerIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > CosmeticsIndustr ...

General SKU357X1336 LocationBarneveld MakeBuss AG Main Features Motor49 KW Inlet diameter79 mm L/D17 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.69,8 mm L/D17 With heating zones3x Electric heatingcheck With jacketcheck DC-motor49 kW 460 V 2710 rpm Screw speed300 rpm Inletø 79 mm Feeding with hopperBuss ELS 70 Feeding with metering screw63 rpm MaterialStainless steel 1.4000 (410S) With jacketcheck General TypeMDK70-17D Mach.No.942500 Year of construction1988 Floorspace2 x 0,85 m Total height1,8 m Extra SpecificationsWith 3x temperature control units: Heating medium: thermal oil, electrically heated Max. temp.: 300 °CGeneric medicinesPlastic & polymersMixing extrudersCatalysts & fillersCosmeticsSolid pharmaceuticsDyes & pigmentsMinerals & inorganicBussIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > P ...

General SKU101Y726 MakeHändle TypeEDR 21-A No.PZ-3445 Year of construction2000 LocationBarneveld Main Features Motor22 KW Length1400 mm Inlet diameter210 mm Specified Features - Double screw extruder Screw press(1x) Double screwcheck Screw diameter210mm Screw length1400mm Motor22,0 kW, 400/690 V Speed± 43 Rpm Inletdia. 245mm With jacket(max. 6 bar) With jacketcheck Double screw extruders MaterialStainless steel General Floorspace3,6x0,9 M Total height1,3 M Weight2950 KG Extra Specifications- Sieve plate housing is missing - Max. pressure 20 barPowdered foodsAgrochemicalsPlastic & polymersDiscountCosmeticsAnimal feedOther feedDouble screw extrudersHaendleIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersDiscountIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIndustrie ...

General SKU041H136 MakeHändle TypeEDR 21-A No.PZ-3444 Year of construction2000 LocationBarneveld Main Features Motor22 KW Length1400 mm Inlet diameter210 mm Specified Features - Double screw extruder Screw press(1x) Double screwcheck Screw diameter210mm Screw length1400mm Shaft diameter100mm Pitch250/140mm Motor22,0 KW, 400/690 Volt Speed± 43 Rpm Inletdia. 245mm With jacket(max. 6 bar) With jacketcheck Double screw extruders MaterialStainless steel General Floorspace3,6x0,9 M Total height1,3 M Weight2950 KG Extra Specifications- Max. pressure 20 barPowdered foodsAgrochemicalsPlastic & polymersDiscountCosmeticsAnimal feedOther feedDouble screw extrudersHaendleIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersDiscountIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIn ...

General SKU042B319 LocationBarneveld MakeBerstorff Main Features Motor90 KW Inlet diameter150 mm L/D10 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter150mm L/D10 AC-motor90,0 KW, 380 Volt (Ex) Screw speed± 75 Rpm General TypeZE-130R Silicon tube extruder Mach.No.EO 2900/92 Year of construction1993 Floorspace4,0x1,2 M Total height2,3 M Weight6500 KG ATEX designedcheckPowdered foodsAgrochemicalsPlastic & polymersDiscountCosmeticsAnimal feedOther feedDouble screw extrudersBerstorffIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersDiscountIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedExtruders > Double screw extrudersBrand > Berstorff What you can expect from Foeth: -- Machine is in working condition --  ...

General SKU288P487 MakeWerner & Pfleiderer GmbH (DE) TypeZSK 70 F175E Mach.No.230 196 Year of construction1990 Main Features Motor80 KW Inlet diameter70.5 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter70,5 mm L/D15,3 Co-rotatingcheck Ventedcheck Number of heating zones:3 Electric heatingcheck 7+7+5 kW Water coolingcheck DC-motor80 kW (1500 rpm) Screw speed300 rpm Used onpowdercoating MaterialMild steel Information LocationBarneveld With switchgearcheck (as is) Floorspace4,0 x0,9 m Weight5700 kg Extra Specifications- Gearbox ratio 5:1 - Including GWK Watercooler Powdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersW&PIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > CosmeticsInd ...

General SKU103Y799 MakeBaker Perkins, Stoke on Trent TypeMPC/V30 Mach.No.65034 Year of construction19856 Sizes Screw diameter30 mm Main Features Motor3 KW Inlet diameter30 mm L/D14 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter30mm, Screw length 420mm L/D14 Co-rotatingcheck Number of heating zones:3 (6x 200 Watt per zone) + die heater Electric heatingcheck Water coolingcheck DC-motor3,0 KW, 180 Volt With variable speed drivecheck Feeding with metering screwdia. 32mm Used ontoner With jacketcheck General LocationBarneveld Floorspace2,0 x 0,9 m Total height2,0 m Weight820 kg Technical specs Extra informationMoC: screw housing The material 1.0762 or 44SMn28 is an unalloyed quenched and tempered steel.Powdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersBaker PerkinsIndustries >  ...

Size: Screw diameter (Ø): 160 mm Equipments: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

General SKU411T126 LocationBarneveld CEcheck MakeClextral Framatome Main Features Motor52 KW Inlet diameter80 mm L/D36 Specified Features - Double screw extruder Double screw extrudercheck Number of hours146.30 Screw diameter32 mm L/D36 Counter rotatingcheck Number of heating zones:8 Steam heatingcheck AC-motor45/52kW, 380-420/440-480/660 Volt, 1480/1780 rpm Feeding with metering screwclextral C0 Number of temperature controllers:8 MaterialStainless steel 1.4306 (304L) General TypeEV 32 Mach.No.B 101 Year of construction2000 With switchgear(as is) Floorspace4,3x1,42 m Total height3.26 Weight3460 kg Extra Specificationsmachine comes with k-tron Feederspecifications:Type LWF D5/ Type K2-ML-T35/DRDia: 400mm feeder inletOutlet: 110mmPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersClextralIndustries > Food & Feed > ...

General SKU219X100 MakeXplore TypeMicro 5 Mach.No.5-03-12 Year of constructionUnknown Sizes Screw diameter10 mm Main Features Motor0.55 KW Inlet diameter5 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter5-10 mm L/D10 Number of heating zones:6 Electric heatingcheck Air coolingcheck Water coolingcheck DC-motor550 watt, 208-240 volt Screw speed1-400 rpm Capacity5 ml MaterialChromed steel General LocationBarneveld With switchgearcheck Floorspace0,70x0,40 m Total height0,85 m Weight220 kg Extra SpecificationsScrew length 107 mm, volume 5,5 ml., (5 ml.), max barrel temperature 450°C, RKC SR mini touchscreen system, max vertical force 5 kN, pressure 200 barPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extruders-Industries > Food & Feed > Powdered foodsIndustries > Chemical > Ag ...

General SKU204U042 LocationBarneveld MakeWerner &: pfleiderer Sizes Screw diameter70 mm Main Features Motor108 KW L/D23 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter70 mm L/D23 Co-rotatingcheck Water coolingcheck AC-motor108kW, 330Volt, 1500rpm With variable speed drivefrequency controller Screw speed198 rpm Exchangeable segments( not included) MaterialNichrome 2.4869 With jacketcheck General TypeZSK 70F175E Mach.No.231783 Year of construction1996 ( gearbox 2017) With switchgearcheck Sizes switchgear1,25x0,7x2,15 m Floorspace4,6x2 m Total height1,7 m Weight6400 kg Extra Specificationsinlet: 142x130 mm- there are 2 screw shafts present- no screw segments present- no extruder head presentOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalB ...

General SKU292M351 MakeWysstec AG TypePharma-Extruder PHARMEX 35 T & Noduliser SPHAEROMAT 250 T No.11480 Mounted on framecheck Main Features Motor0.55 KW L/D6 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter35 mm L/D6 D AC-motorcheck (1,5 kW Ex) With variable speed drivecheck Screw speed25-150 rpm Feeding with hoppercheck Capacity2-20 kg/h Single screw extruders With variable speed drivecheck (noduliser) MaterialStainless steel 1.4305 (303) Information LocationBarneveld With switchgearcheck Floorspace1,1x0,8 m Total height1,7 m Weight340 kg Extra SpecificationsNoduliser PHAEROMAT 250: - disc diameter: 250 mm - with outlet - with cover - motor: 0,55 kW (Ex) - with variable speed drive - disc speed: 0-1440 rpm Powdered foodsSingle screw extrudersFeed additivesAnimal feedOther feedWysstecIndustries > Food & Feed > Powdered food ...

screw ø:: 30 mm screw length:: 25D screw speedl:: -- U/min drive power:: 4 kW Condition: second-hand Specification: Co-extruder, plastic extruder, type 30-25D as good as new, unused, - Screw diameter: 30 mm - Screw length: 25D - Output approx.: 12–18 kg/h - Raw material: Soft PVC/PE/PP/TPE/TPV (in granule form) - Application: Sealing profiles - DC motor power: 4 kW - Extruder zones: 5 (3 on the barrel, 2 on the die head) - Extruder height: 900–1200 mm - Die head connection: Flange connection - Further details are provided in the annex to the quotation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.

Used rubber extruder make Troester, type GSV 60/k-12-18D-m.S., Execution as desired, with or without vacuum Built in 1991, machine was in operation until the beginning of 2010 Feed roller Kpl. new drive with flat gear motor Screw speed max. 62 rpm. Engine power 22 kW Control with PLC and temperature control new on request Extruder similar to attached photos.

Used Troester rubber extruder type GSV 60/k-12-18 D with feed roll can be modified/overhauled according to customer\s specification, with or without vacuum, year of construction: 1991 machine was in operation until end of 2010. including feed roll, new drive with flat-gear motor screw speed: maximum 62 rpm motor power: 22 kW PLC control and TCU can be renewed, if requested.

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

Barwell Hydraulic Extruder – Used For sale: a used Barwell hydraulic extruder, designed for processing rubber compounds and elastomers. Barwell machines are well known worldwide for their robust construction, reliability, and consistent performance in industrial applications. The machine has been operated in an industrial environment, regularly maintained, and remains in good technical condition. Ready for further use after installation. Key features and advantages: Hydraulic drive ensuring smooth, stable, and precise extrusion Heavy-duty, solid construction for long service life Reliable operation, even with demanding rubber compounds User-friendly operation and easy integration into existing production lines Proven Barwell quality, widely trusted in the rubber industry Applications: Extrusion of rubber profiles and semi-finished products Preparation o ...

Farrel Twin Screw / Rollerdie Extruder complete available with Motor and Inverter Description attached!

Key data: 70

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

screw ø:: 120 mm screw length:: 17D screw speedl:: 42 U/min drive power:: 138 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: für Extruder 90 mm screw length:: -- screw speedl:: -- U/min drive power:: 13,6 kW Condition: little used, as good as new Specification: gear pump ZP 75/50 for extruder size 90 - SEW helical gear units: R 97 - Siemens direct current motor: 1 GG5 118 - Drive power: 13.6 kW, 57 A - curved tooth coupling - With clamp for the head connection, - Clamping flange for extruder and head connection, - Base plate with linear guide rails, - Tooth shaft diameter: 75 mm - tooth width: 50 mm - helical gearing, hardened steel bearings, right-hand drive - without control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 90 mm screw length:: 20D screw speedl:: 0 - 60 U/min Condition: NEW, Specification: Rubber vacuum extruder - with warranty - Screw diameter: 90 mm - Screw length: L = 20 D (approx. 1,800 mm conveying length) - Screw speed: 0 - 60 rpm - Centre height of extruder: approx. 1,125 mm incl. base frame - Max. permissible injection pressure: 500 bar - with feed roller - Extruder water-tempered - Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump - Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm - Vacuum cylinder: three tempering zones BL = 1,057 mm - End cylinder: one temperature control zone approx. 4D = 360 mm - Number of tempering zones: 5 - Heating capaci ...

Francis Shaw 30mm Extruder Roller Feed LD ratio 15:1 Year 1993

Iddon 75mm Cold Feed Rubber Extruder With roller feed With motor, gearbox and control panel

120 mm cold feed pen convert-extruder, GE 120 SC, make Berstorff, output capacity up to 1,000 kg /h as a power extruder with strip spray head, complete rebuild mechanically and electrically in 2024

90s cold feed extruder, GE 90 x 16 D Vac, make Troester, with large hose / profile spray head, drive 52 KW Siemens AC, 4 TCU Siengle

Key data: 50 mm

50mm Extruder Manufacturer: Rutil Screw diam. 50mm LD ratio 15:1 Max speed (50 Hz) 70rpm

AST 220 / POMINI-FARREL flat head / POMINI-FARREL 18"x15" Slabber / BANDERA Slabber. Refer to code 1043-1044-1045-1046 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

cold feed extruder - 60 mm x 18 D vacuum, with feed roller, drive 22 KW, screw speed 10 to 60 rpm, with gear pump, 5 TCU,

cold feed vacuum extruder Troester 90 mm x 18 D, with feed roller, drive 46 kW, pie speed 10 to 60 rpm, 5 TCU,

Key data: 215 mm, 304

Pomini 12” x 8.5” Dump Extruder Type 12/8.5 Year of Manufacturing: 1993 Conical screw 300mm 215mm diam. Pneumatic crammer feed with DC variable speed motor Pelletizing head Without controls

Colmec 150mm Extruder Model: TGF 150/ 16D LD ratio 16:1 Screw length 2340mm Siemens Motor, 178kW, 1860rpm Hydraulically operated crosshead With Control cabinet With Temperature control unit Spare screw Year 2001

screw ø:: 30 mm screw length:: 16D screw speedl:: -- U/min Condition: used, Specification: Extruder - used - screw diameter: 30 mm - screw length: L = 16 D - with feed roller - Extruder water tempered, - Cylinder and head one tempering zone - Feed section can be cooled or heated - Flow rate adjustable - Screw compression approx.: 1:1.2 - Spraying head for hoses and profiles - Various injection moulds are available - Extruder complete incl.: - Motor from Techno Drives, type: MD 321 MA Drive power: 5 kW, 360 V Motor current max.: 19.7 A N/max.: 1,750 rpm - Control cabinet mounted directly next to the extruder - Profile/tube extrusion head with clamp - Temperature control Extruder is mounted on a base plate - Mass pressure measurement and display available - Operating and display elements are installed in the switch cabinet - Mobile version  ...

screw ø:: 90 mm screw length:: 16D screw speedl:: ca. 40 U/min drive power:: 48,5 kW Condition: used, overhauled to order, including warranty, including CE marking Specification: extruder – used with feed roller - Screw diameter: 90 mm - Screw length: L = 12D - Screw speed approx.: 40 rpm - Motor rated power: 48.5 kW - Belt drive, number of belts: 5 - Number of heating/cooling zones: 4 - Voltage: 3x 380V, 50Hz, N For further details, please refer to the attachment. Price on request, depending on design and customer requirements The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 60 mm screw length:: 15D screw speedl:: -- U/min Condition: used Specification: rubber extruder – used - Screw diameter: 60 mm - Screw length approx.: 15D - Sold as seen. The buyer is responsible for safety regulations. No CE marking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 70 mm screw length:: 22D screw speedl:: -- U/min Condition: used Specification: rubber extruder line – used COLMEC Extruder, Hot Air Channel, Cooling Bath Consisting of: Extruder COLMEC 70 x 22D - Screw diameter: 70 mm - Screw length approx.: 22D - Extruder motor power: 37 kW - Cooling unit for extruder Hot air oven: - Hot air oven power: 80 kW - Fan power: 2x 0.36 kW, 2x 1.5 kW - Stainless steel cooling bath The system is in good condition and was still in operation until approx. 6 months ago - Sold as seen. The buyer is responsible for safety regulations. Without CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 60 mm screw length:: 11D screw speedl:: -- U/min drive power:: 18,5 kW Condition: used, reconditioned Specification: rubber extruder – used - Screw diameter: 60 mm - Screw length approx.: 11D - New screw - Cylinder refurbishment - Feed roller refurbishment - New safety cage - New rotary joint for water - New AC motor: 18.5 kW - New control cabinet with Siemens S7-1200 PLC system - New control panel with Siemens KTP700 Basic touch panel - New Siemens G120 frequency converter for variable speed - Remote maintenance device - New cabling - Pressure sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Refurbished in accordance with CE standard safety regulations Warranty: 1 year Option: TCU for temperature control of the water up to 95°C, for placement near the extruder The data for this ad  ...

Consists of: ROLLER/EX rubber pressure rollers / packer rollers Consisting of: 2 rubber rollers Working width: approx. 2,200 mm per roll Roller diameter: approx. 500 mm 18 rubber rings per roll Total: 36 rubber rings Steel frame, red Including mounting material The rollers and frame have been disassembled. As far as is known, all parts and fasteners are present to rebuild the whole. Auction-ID: A1-47386-273

Extruder 70 mm - 24 L/D with pipe head up to 63 mm, calibration tank 6000 mm Caterpillar extractor, saw