rubber belt used for sale

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 32-8M-20 -Material: Steel -Number of teeth: 32 teeth / Belt width: 20 mm -Mount: Optibelt 1610-19 taper clamping bushing Ø 19 x 28 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 87 x 28 mm -Weight: 0.8 kg/pc.

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, belt conveyor type TB30-185M with adjustable guide rails -Speed: frequency-controlled 38.3 - 51.1 m/min -Drive: Oriental Motor 120W, see photo of the nameplate -Voltage: 0-240V / 0-333Hz -Belt width: 155 mm -Conveyor length: 460 mm -Transport dimensions: 460/345/H200 mm -Weight: 11 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, belt conveyor type TB30-140/M with servo motor -Speed: 87 m/min -Drive: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 -Belt width: 110 mm -Conveyor length: 1290 mm -Transport dimensions: 1310/390/H160 mm -Weight: 15.2 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, Belt conveyor type TB30 double belt with light switch -Speed: 87 m/min -Drive: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 -Strap width: 2x 15 mm -Conveyor length: 1290 mm -Light switch: Sick WTB9-3P2261, not connected -Transport dimensions: 1290/390/H260 mm -Weight: 14.5 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Feldpausch, conveyor belt, transport belt, belt conveyor, height-adjustable -Speed: 15 m/min -Belt width: 250 mm -Conveyor length: 2060 mm -Height: max. 920 mm -Drive: Engel 0.06 kW, see photo of nameplate -Transport dimensions: 2060/530/H810 mm -Weight: 70 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 90 mm -Transport width: approx. 660 mm -Mounting: ball bearings on both sides, see photos -Shaft: Ø 30 mm -Number: 1x transport wheels available -Dimensions: Ø 90 x 750 mm -Weight: 6.8 kg/pc.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 103 mm -Transport width: approx. 645 mm -Mount: ball bearings on both sides with bearing block (see photos) -Shaft: Ø 30 mm -Quantity: 1x transport roller available -Dimensions: Ø 103 x 845 mm -Weight: 8.7 kg/pc.

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Soco, conveyor belt, transport belt, belt conveyor from packaging machine -Speed: 21 m/min -Belt width: 380 mm -Conveyor length: 740 mm -Drive: 0.12 kW, see photo of nameplate -Transport dimensions: 780/640/H620 mm -Weight: 36 kg

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Soco System, Conveyor belt type 2EL016G-A, unused, original packaging -Width: 380 mm -Length: 1560 mm -Quantity: 2 pieces available -Price: per piece -Transport dimensions: 380/200/H130 mm -Weight: 1.4 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 50 mm -Transport width: approx. 500 mm -Wave: Dimensions see photos -Quantity: 118x transport rollers available -Price: per piece -Overall dimensions: Ø 50 x 540 mm -Weight: 1.3 kg/piece

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 50 mm -Transport width: 410 mm -Shaft: Ø 10 mm, dimensions see photos -Quantity: 15x transport rollers available -Price: per piece -Overall dimensions: Ø 50 x 475 mm -Weight: 0.6 kg/piece

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 50 mm -Transport width: approx. 500 mm -Wave: Dimensions see photos -Number: 8x transport rollers available -Price: per piece -Overall dimensions: Ø 50 x 540 mm -Weight: 1.2 kg/piece

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 50 mm -Transport width: approx. 570 mm -Wave: Dimensions see photos -Quantity: 12x transport rollers available -Price: per piece -Overall dimensions: Ø 50 x 620 mm -Weight: 1.4 kg/piece

Transnorm conveyor belt GF 1050-600-500 RA2475 Technical data: Conveyor length (NL): 1050 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1050 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 scope of delivery ...

Transnorm conveyor belt GF 950-600-500 RA2474 Technical data: Conveyor length (NL): 950 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 950 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,37/S1 scope of delivery: without supports and side guides Für eine individuel ...

Transnorm conveyor belt GF 1020-600-500 RA2473 Technical data: Conveyor length (NL): 1020 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1020 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,37/S1 scope of delivery: without supports and side guides Für eine individ ...

Key data: 390 mm, 390 mm

Grinding machine Löwer Type: HBS 400 Year of Make: 1999 CE Versatile single-belt sanding machine for both adaptation grinding heavy glulam beam as well as for calibrating to measure. Grinding width max. 390 mm Grinding height max. 390 mm 1 sanding shoe from above Grinding motor 7.5 kW Sanding belt dimensions 300 x 1800 mm Transport carpet for material feed Feed rates 6/11/16 m/min. Extraction connection diameter 150 mm Constant table height for the use of roller conveyors pneumatic abrasive belt oscillation pneumatic abrasive belt clamping Special HBS sanding shoe for adjustment grinding for thickness differences of up to 4 mm or crooked workpieces Selector switch adaptation grinding / calibration Motorized workpiece thickness adjustment with rapid traverse Automatic workpiece thickness scanning Heavy, robust design With some abrasive belts in 60 and 100 grit  ...

CENTAURO cast iron band saw model CL800: - with 800mm solid flywheels - Motor KW 5.5 / HP 7.5, Volt 380 - Tilting table up to 20° - upper and lower blade guide Year 1998, machine according to CE standards AVAILABILITY FROM JUNE 2026

Manufacturer: Weber KSV 1350 4, Type: KLE 1300, Year: 2008, Control: Weber, Monting of the machine: Quer/längs/Quer/Quer/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 5, Sanding belt dimensions: 1370 X 2620/5100 X 150, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Transverse sanding units: 3, Längsschleifaggregate: 1, Bürstenaggregate: 1, Rubber roller: no, Bürstenaggregate: 1, Band 1 Leistung kW : 15, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 2 Leistung kW : 21, Belt 2 shoe unit: CBF Aggregat, Band 2 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 3 Leistung kW : 15, Band 3 Schuhaggregat: yes, Band 3 Queraggregat: yes, Band 3 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 4 Leistung kW : 15, Band 4 Queraggregat: yes, Band 4 Schleifbandgesc ...

Manufacturer: Heesemann, Type: MFA 6 Impression, Year: 2008, Control: Längs/Stahlwalze/ Bürste, Monting of the machine: 1300, Double sided sanding line: 3 - 140, Sanding width mm: 1, Sanding hight mm: 2620 x 1350, Number of sanding belts: 0,5 - 12, Konstantentisch: Konstatntentisch, Bürstenaggregate: CSD , Rubber roller: 16, Band 1 Leistung kW : 15, Konstantentisch: Konstatntentisch, Band 2 Leistung kW : 5 - 25, Belt 2 shoe unit: 3, Band 2 Queraggregat: yes, Band 2 Schleifbandgeschwindigkeit m/s : yes, Band 3 Kombiaggregat: yes, Band 3 Schleifbandgeschwindigkeit m/s : 1,5 kW, Year :2008

Manufacturer: Steinemann, Type: Nova 220 K, Year: 1994, Control: oben / unten / Bürste / Bürste, Barcode: yes, Monting of the machine: 2200, Double sided sanding line: 1 - 150, Sanding width mm: 2, Sanding hight mm: 2620 x 2300, Sanding belt dimensions: 11, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : 11, Frequency control of belts: 2 x 275 mm, Steel roller: no, Band 1 Leistung kW : 90, Belt 1 shoe unit: 90, Band 2 Leistung kW : 4 - 24, Belt 2 shoe unit: 9, Band 2 Kombiaggregat: 1, Band 2 Queraggregat: no, Band 2 Schleifbandgeschwindigkeit m/s : yes, Band 3 Schleifbandgeschwindigkeit m/s : 2 x 1,1 kW, Year :1994

Manufacturer: Unitek, Type: 3N RRT 1100, Monting of the machine: Stahl/Gummi/Schuh, Sanding width mm: 1100, Sanding hight mm: 160, Number of sanding belts: 3, Shore roller 1: Stahl 160 mm, Shore roller 2: Gummi 220 mm, Walze 3 Shorehärte : Schuh 50 mm, Band 1 Leistung kW : ca. 15, Band 1 Schleifbandgeschwindigkeit m/s : 18, Band 2 Leistung kW : ca. 15, Band 2 Schleifbandgeschwindigkeit m/s : 16, Band 3 Kombiaggregat Walze/Schuh: yes, Band 3 Leistung kW : ca. 15, Band 3 Schleifbandgeschwindigkeit m/s : 14, Table hight adjustment by engine: 0,25 kW, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 1,5,

Manufacturer: Sandingmaster Breitbandschleifmaschine , Type: SA-3202-1100, Year: 1996, Monting of the machine: Walze/Kombi, Sanding width mm: 1100, Sanding hight mm: 140, Number of sanding belts: 2, Sanding belt dimensions: 2150-1150, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : yes, Elektronische Tastung mm: yes, Frequency control of belts: Band 2, Längsschleifaggregate: 2, Rubber roller: yes, Steel roller: Gummi ca.80 shore, Band 1 Leistung kW : ca.10, Belt 1 shoe unit: yes, Band 2 Leistung kW : ca.10, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 8-15, Transportbandantrieb kW: 1,5, Vacuum table: yes, Segment sanding shoe: yes, Weight in kg: 2500, Year :1996

Manufacturer: Heesemann 5 Aggregate, Type: LSM 8, Year: 2005, Control: Heesemann, Monting of the machine: Stahlwalze/Querband/Längsband/Längsband/Längsband/Bürste, Sanding width mm: 1300, Sanding hight mm: 3-80, Number of sanding belts: 5, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Transverse sanding units: 1, Längsschleifaggregate: 3, Bürstenaggregate: yes, Steel roller: 1, Bürstenaggregate: yes, Band 1 Leistung kW : 37/Walze, Band 1 Schleifbandgeschwindigkeit m/s : 28, Belt 2 shoe unit: Querschleifaggregat, Band 2 Kombiaggregat Walze/Schuh: zuschaltbare Stahlwalze, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 0,5-24, Band 3 Leistung kW : 20/24, Band 3 Schleifbandgeschwindigkeit m/s : 10-20, Band 4 Leistung kW : 18,5, Band 4 Schleifbandgeschwindig ...

Manufacturer: Heesemann , Type: LSM 8, Year: 1998, Control: Heesemann, Sanding width mm: 1300, Sanding hight mm: 1200, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Belt 1 shoe unit: Queraggregat, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Band 2 Leistung kW : 13/17, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Band 3 Leistung kW : 13/17, Band 3 Schleifbandgeschwindigkeit m/s : regelbar, Transportbandantrieb kW: ca.4, Intermediate sanding of lacquer: yes, Vacuum table: yes, Segment sanding shoe: yes, Werkstück-Abstrahleinrichtung: yes, Ionising: yes, Year :1998

Manufacturer: Weber, Type: OFZ-KS 2, Year: 1993, Control: Weber, Monting of the machine: Quer/lkombi-Schuh/längs, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350/4650 X 150, Rubber roller: 1, Shore roller 1: 150 mm (gummi), Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Band 1 Schleifbandgeschwindigkeit m/s : 11/22, Belt 2 shoe unit: Kombi, Band 2 Kombiaggregat Walze/Schuh: yes, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-20, Band 3 Kombiaggregat Walze/Schuh: schuh, Band 3 Leistung kW : 11, Band 3 Schleifbandgeschwindigkeit m/s : 2-20, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 4-25, Intermediate sanding of lacquer: yes, Constant table hight: ...

Manufacturer: Ernst, Type: 830-2, Monting of the machine: längs / längs / längs, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 1.400 x 3.150, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 2 - 10, Belt 2 shoe unit: yes, Band 2 Leistung kW : 11, Band 2 Schleifbandgeschwindigkeit m/s : 2 - 10, Band 3 Leistung kW : 18, Band 3 Schleifbandgeschwindigkeit m/s : 1 - 7, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 8 - 30, Vacuum table: yes, Brushing unit: 3 kW, Diameter/ brush bristles: 200,

Manufacturer: Heesemann, Type: FGA 8, Year: 1994, Control: Heesemann, Monting of the machine: Längs / Bürste / Bürste, Sanding width mm: 1.350, Sanding hight mm: 3 - 140, Number of sanding belts: 1, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Längsschleifaggregate: 18,5, Belt 1 shoe unit: 0,5 - 16, Elektronische Tastung mm: yes, Table hight adjustment by engine: no, Combi unit roller/shoe: 4,5 - 21, Table hight adjustment by engine: 1,85, Transportbandantrieb kW: yes, Intermediate sanding of lacquer: 5,5 kW, Programmanwahl extern: 3, 6 + 1,5 kW, Pressure pads for short workpieces: 250 + 150 mm, Levelling brush for paint: 4.500, Year :1994

Manufacturer: Heesemann, Type: LSM 8, Year: 1998, Control: neu 2017, Monting of the machine: Q / L / L/ B, Sanding width mm: 1350, Sanding hight mm: 3 - 80, Number of sanding belts: 3, Sanding belt dimensions: 5.400x150 2.620x1.350, Table hight adjustment by engine: no, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13 / 17, Band 1 Schleifbandgeschwindigkeit m/s : 12 / 24, Belt 2 shoe unit: yes, Band 2 Leistung kW : 16,5 / 21, Band 2 Schleifbandgeschwindigkeit m/s : 10 / 20, Band 3 Leistung kW : 16,5 / 21, Band 3 Schleifbandgeschwindigkeit m/s : 10 / 20, Elektronische Tastung mm: 16, Frequency control of belts: no, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 5 - 25, Transportbandantrieb kW: 4,0, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: 7,5 kW, Brushing unit: 150 mm, wast cleaning: EA 2, ...

Manufacturer: Heeseman , Type: LSM 6, Year: 1994, Control: Kuhnke/Heesemann, Equipment of machine 2: Quer/kombi-Längs/kombi-Längs/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 3620 X 1350/5400 X 150, Table hight adjustment by engine: yes, Rollers: 2, Steel roller: 2, Transverse sanding units: 1, Längsschleifaggregate: 2, Bürstenaggregate: 1, Band 1 Leistung kW : 13/17, Band 2 Leistung kW : 13/17, Band 3 Leistung kW : 13/17, Table hight adjustment by engine: yes, Transportbandantrieb kW: ca.4, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Werkstück-Abstrahleinrichtung: yes, Year :1994

Manufacturer: Bütfering, Type: SCO 413/TQEQ, Year: 2007, Control: Programmspeicher 600, Barcode: möglich, Monting of the machine: Querschleifen/Längschleifen/Querschleifen/Enststaubung, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rollers: keine, Transverse sanding units: 2, Längsschleifaggregate: 1, Bürstenaggregate: 1, Belt 2 shoe unit: Querschleifen, Band 2 Leistung kW : 13,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-16, Belt 2 synchronous and reverse run: Längsschleifen, Band 3 Kombiaggregat Walze/Schuh: Schuh, Band 3 Leistung kW : 15, Band 3 Schleifbandgeschwindigkeit m/s : 2-18, Band 4 Kombiaggregat Walze/Schuh: Querschleifen, Band 4 Leistung kW : 13,5, Band 4 Schleifbandgeschwindigkeit m/s : 2-16, Separation of sampling in mm: 25, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 4- ...

Manufacturer: Costa, Type: SbF, Year: 1999, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Shore roller 1: ca.35, Längsschleifaggregate: 11, Belt 1 shoe unit: regelbar, Band 4 Schleifbandgeschwindigkeit m/s : yes, Table hight adjustment by engine: yes, Elektronische Tastung mm: 5-25, Separation of sampling in mm: 0,25, Continous adjustable feeding speed m/min: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Constant table hight: yes, Year :1999

Manufacturer: Costa, Type: CCC + CCC 1150, Year: 1998, Monting of the machine: obenWalze/Walze/Walze , Equipment of machine 2: untenWalze/Walze/Walze, Double sided sanding line: yes, Sanding width mm: 1150, Sanding hight mm: 120, Number of sanding belts: 6, Sanding belt dimensions: 2620 X 1150, Table hight adjustment by engine: yes, Rubber roller: 3 +3, Shore roller 1: 70, Shore roller 2: 70, Walze 3 Shorehärte : 60, Längsschleifaggregate: ca.34, Belt 2 shoe unit: ca.22, Belt 2 synchronous and reverse run: ca.17, Belt 3 synchronous and reverse run: 34/22/17, Table hight adjustment by engine: yes, Combi unit roller/shoe: 8-20, Table hight adjustment by engine: ca 3 + 3, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Pressure pads for short workpieces: 150, Year :1998

Manufacturer: Heesemann, Type: LSM 8, Year: 2003, Control: Steuerung der Anlage Neu, Monting of the machine: Quer / Längs / Bürste / Bürste, Sanding width mm: 1400, Sanding hight mm: 3 - 120, Number of sanding belts: 2, Sanding belt dimensions: 2.620 x 1450, Transverse sanding units: 1, Längsschleifaggregate: 1, Band 1 Leistung kW : 15, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Belt 2 shoe unit: yes, Band 2 Schrägstellbar Grad : 15, Band 2 Innenliegendes Drucklamellenband : 0,5 - 12, Band 4 Schleifbandgeschwindigkeit m/s : 16, Belt 4 synchronous and reverse run: 2, Frequency control of belts: 5 - 25, Combi unit roller/shoe: 2,2, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: yes, Typ/Stückzahl: 5,5 kW, Vacuum table: 4,0 + 1,5 kW, Brushing unit: 250 + 150 mm, Ionising: 7.600, Year :2003

Manufacturer: Costa Kalibrieranlage, Type: KA CC 1350, Year: 2007, Control: Siemens/KEB, Monting of the machine: 2x Stahlwalze geriffelt, Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1380, Table hight adjustment by engine: yes, Steel roller: 2, Längsschleifaggregate: 30, Belt 2 shoe unit: 22, Band 2 Schrägstellbar Grad : no, Band 2 Innenliegendes Drucklamellenband : nur Gegenlauf, Table hight adjustment by engine: yes, Elektronische Tastung mm: 8-20, Separation of sampling in mm: 2,2, Table hight adjustment by engine: variabel, Continous adjustable feeding speed m/min: yes, Constant table hight: no, Brushing unit: yes, Werkstück-Abstrahleinrichtung: 3400, Diameter/ brush bristles: yes, wast cleaning: Pneumatische Absaugvorrichtung dabei, Oszilation dabei, Year :2007

Manufacturer: Venyeskob, Year: 1995, Working length mm: 3950, Working widht mm: 1300, UV-Band: no, Total hight mm: 920 +/- 50, Belt width: 1300, UV conveyor belt: no, Bandkühlung: no, Own controller: no, Bandsteuerung : yes, Total hight mm: 920 +/- 50, Engine power kW: 0,75, Total power kW: 0,75, Feeding speed min-max m/min: 12-20, Feeding speed continous adjustable: extern FU, Belt control: yes, Working hight adjustable mm: yes, Movable: no, Required space L x W x H mm: 4000x1600x1000, Total lenght: 4000, Feeding speed adjustable: extern, Hydraulic platforms: no, Installation height: 920, Weight approx. kg: 500, CE-Sign: no, Year :1995

Manufacturer: Heesemann, Type: LSM 8, Year: 1995, Control: Heesemann, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Band 1 Leistung kW : 11, Band 1 Schleifbandgeschwindigkeit m/s : 0,3 - 12, Band 2 Leistung kW : 11, Band 2 Schleifbandgeschwindigkeit m/s : 0,3 - 12, Frequency control of belts: yes, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 8 - 40, Transportbandantrieb kW: 4,0, Intermediate sanding of lacquer: yes, Vacuum table: 5,5, Noise enclosure: yes, Brushing unit: 4,0 + 1,5 kW, Texturing brush diameter: 250, Levelling brush for paint: 150, Weight in kg: 8850, Year :1995

Manufacturer: Heesemann, Type: LSM8 U + LSM8 S, Year: 1997, Control: Heesemann, Monting of the machine: L / L / L , Equipment of machine 2: L / L / L, Double sided sanding line: yes, Sanding width mm: 1350, Sanding hight mm: 3 - 80, Number of sanding belts: 3 + 3 , Sanding belt dimensions: 2620 x 1350, Rollers: 2 + 2, Steel roller: 2 + 2, Band 1 Leistung kW : 45, Band 1 Schleifbandgeschwindigkeit m/s : 24, Band 2 Leistung kW : 37, Band 2 Schleifbandgeschwindigkeit m/s : 24, Band 3 Leistung kW : 13/17, Band 3 Schleifbandgeschwindigkeit m/s : 10/20, Continous adjustable feeding speed m/min: 3 - 15, Transportbandantrieb kW: 4 + 3, Abrasive belts at bottom: 3, Intermediate sanding of lacquer: no, Vacuum table: 15 / 5,5, Noise enclosure: yes, Brushing unit: yes, wast cleaning: 0,75 kW, Weight in kg: 11000+9000, Year :1997

Manufacturer: Heesemann, Type: MFA 8/Rechtsmaschine, Year: 1996, Monting of the machine: Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 1, Continous adjustable feeding speed m/min: 5 - 25, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Brushing unit: yes, Diameter/ brush bristles: 150, Year :1996

Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994

Manufacturer: Heesemann, Type: LSM 8, Year: 1995, Monting of the machine: Quer/Längs/Längs/Längs/EA , Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 5400 X 150/2620 X 1350, Belt 1Transverse sanding unit: yes, Band 1 Leistung kW : 13/17, Belt 2 shoe unit: yes, Band 2 Leistung kW : 13/17, Band 3 Kombiaggregat Walze/Schuh: Schuh, Band 3 Leistung kW : 13/17, Band 4 Kombiaggregat Walze/Schuh: Schuh, Band 4 Leistung kW : 13/17, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: no, Continous adjustable feeding speed m/min: 5-25, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, wast cleaning: EA 2, Year :1995

Manufacturer: Heesemann, Type: LSM 8, Year: 2016, Control: PC 10,4 , Monting of the machine: Walze / Walze, Sanding width mm: 1350, Sanding hight mm: 0,5 - 100, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Steel roller: 2, Band 1 Leistung kW : 45, Band 1 Schleifbandgeschwindigkeit m/s : 0,1 - 24, Band 2 Leistung kW : 37, Band 2 Schleifbandgeschwindigkeit m/s : 0,1 - 24, Belt 2 synchronous and reverse run: yes, Frequency control of belts: 2, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 5 - 25, Vacuum table: yes, Brushing unit: 1,5 kW, Year :2016

Manufacturer: Heesemann, Type: MFA 6, Year: 2011, Control: PC, Monting of the machine: Quer/Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 2, Sanding belt dimensions: 2150 X 1350, Steel roller: kombi, Belt 1Transverse sanding unit: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 2, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: yes, Brushing unit: yes, FREE TEXT: vakuumteppich/Zustand sehr gut, Year :2011

Manufacturer: Bütfering, Type: AWS 2CE 1100, Year: 1992, Monting of the machine: Walze / Schuh, Sanding width mm: 1100, Sanding hight mm: 150, Number of sanding belts: 2, Sanding belt dimensions: 1110 x 1900, Steel roller: yes, Band 1 Leistung kW : 15, Band 1 Schleifbandgeschwindigkeit m/s : 5 / 10, Band 2 Schuhaggregat: 11, Band 2 Schleifbandgeschwindigkeit m/s : 5 / 10, Band 2 Gleich und Gegenlauf: yes, Frequency control of belts: no, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: no, Noise enclosure: yes, Brushing unit: 0,55 kW, Weight in kg: 3300, Year :1992

Manufacturer: Viet, Type: S3 T T23TM, Year: 2007, Monting of the machine: Quer/Quer/Bürste , Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 8700 X150 /2620 X 1350/, Table hight adjustment by engine: yes, Band 1Querschleifaggregat: 2, Band 1 Leistung kW : 22, Band 1 Schleifbandgeschwindigkeit m/s : 5-20, Band 2 Schuhaggregat: yes, Band 2 Leistung kW : 22, Band 2 Schleifbandgeschwindigkeit m/s : 5-20, Band 2 Drucklammellenband: yes, Separation of sampling in mm: 16, Frequency control of belts: 2, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Pressure pads for short workpieces: yes, Segment sanding shoe: yes, Bürstaggregat : yes, Year :2007

Manufacturer: Hongtai, Type: 2 Walzen Schleifmaschine, Year: 2017, Control: Weinwiev, Monting of the machine: Walze/Walze/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1350, Shore roller 1: ca.40, Shore roller 2: ca.60, Band 1 Leistung kW : ca.15, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Band 2 Leistung kW : ca.15, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Frequency control of belts: 2, Continous adjustable feeding speed m/min: 10-20, Vacuum table: yes, Diameter/ brush bristles: ca.200, Weight in kg: 5000, Year :2017

Manufacturer: Heesemann, Type: LSM 8, Year: 2005, Monting of the machine: Q/L/L/Bürste, Sanding width mm: 1.300, Sanding hight mm: 3 - 140, Number of sanding belts: 3, Sanding belt dimensions: 3.250x1.350 6.200x150, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13 / 17, Band 1 Schleifbandgeschwindigkeit m/s : 12 / 24, Belt 2 shoe unit: yes, Band 2 Leistung kW : 13 / 17, Band 2 Schleifbandgeschwindigkeit m/s : 10 / 20, Band 3 Leistung kW : 13 / 17, Band 3 Schleifbandgeschwindigkeit m/s : 10 / 20, Elektronische Tastung mm: 32, Frequency control of belts: no, Continous adjustable feeding speed m/min: 6 - 30, Transportbandantrieb kW: 5,5, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: 7,5 kW, Weight in kg: 8.000, FREE TEXT: mit Neuem Transportteppich/Maschine gereinigt und gestestet, Year :2005

Manufacturer: Heesemann , Type: LSM 8, Year: ca. 1998, Monting of the machine: Quer/lang/Scotch/Bürste/Entstaubung, Sanding hight mm: 3-80, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350/5400 x 1400, Band 1Schleifbandgeschwindigkeit m/sec: 0,3-12, Band 2 Schleifbandgeschwindigkeit m/sec: 0,3-12, Table hight adjustment by engine: yes, Cross sanding unit: 1, Shoe unit: 1, Elektronische Tastung mm: 16, Frequency control of belts: 2, Power belt 1 in kW: 11, Performance in kW belt 2: 11, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 1,6-9, Feeding engine kw: 1,5, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Maschine vorführbereit: yes, Voführung möglich: yes, FREE TEXT: 1 zusätzliche Scotch Bürste 4 Kw, Year :1998

Manufacturer: Ernst Funierschleifautomat, Type: 840-2, Year: 2003, Monting of the machine: Quer/lang/lang/lang/Bürste, Sanding width mm: 1305, Sanding hight mm: 3-120, Number of sanding belts: 4, Sanding belt dimensions: 2620 X 1350/5400 X 150, Table hight adjustment by engine: yes, Rollers: no, Band 1Querschleifaggregat: yes, Band 1 Leistung kW : 18,5, Band 2 Schuhaggregat: Simplex Schuh, Band 2 Kombiaggregat Walze/Schuh: no, Band 2 Leistung kW : 30, Band 3 Kombiaggregat Walze/Schuh: Simplex Schuh, Band 3 Leistung kW : 30, Band 4 Kombiaggregat Walze/Schuh: Duplex Schuh, Band 4 Leistung kW : 37, Elektronische Tastung mm: yes, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 13,5-60, Feeding engine kw: ca.4, Constant table hight: 880, Vacuum table: yes, Segment sanding shoe: yes, wast cleaning: yes, Ionising: yes, Weight in kg: 10200, Year :2003