rubber belt used for sale

Transnorm conveyor belt GF 1200-600-500 RA2432 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports an ...

Transnorm conveyor belt GF 1060-600-500 RA2472 Technical data: Conveyor length (NL): 1060 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1060 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m  ...

This ERNST 820-2 belt sander was manufactured in 2002. It features a new conveyor belt and a vacuum hold system for secure positioning. The main sander utilizes a two-shoe system, enhancing its sanding capabilities. It has a working width of 1350mm and a height of 120mm. Contact us for more information about this machine.

Belt sander manufactured in 2013. This FELDER FW 650 features a working width of 650 mm and a powerful 7.5 kW motor. It includes a variable feed speed ranging from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with interchangeable sanding pads and a rubber contact roller. If you are looking to get high-quality sanding capabilities, consider the FELDER FW 650 machine we have for sale. Contact us for further details.

Key data: 150 mm, 6800 mm

Long belt sanding machine Langzauner LZG-E Long Fence Long Belt Sanding Machine, Belt Sanding Machine, Good Condition A long-belt sanding machine from the manufacturer Langzauner is offered here. The machine is in good condition, has a high quality workmanship and is comfortably equipped. A turntable is installed in the table (retractable) so that the workpiece can be rotated quickly. The turntable is raised slightly at the touch of a button by means of a pneumatic cylinder, so that the workpiece can be rotated without much effort. A high-quality and fully equipped sanding machine. Technical data: Table dimensions 2500 mm x 1000 mm Large stand load 1000 mm Motor power sanding belt 3/4.2 kW Fan motor power 1.1 kW Belt speed 11/22 m/sec Belt length 6800 x 150 mm (incl. spare sanding belts) Table height adjustment range 280 mm Electric table height adjustment Weight appro ...

This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7 touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information.

Key data: 1350 mm, 3 , 150 mm

HESEMANN Multi-purpose surface sanding machine MFA 10 Grinding width 1,350mm TRANSVERSE / LONGITUDINAL / LONGITUDINAL DLB Feed speed 5-25m/min frequency controlled Conveyor belt cleaning device Working height constant 880 mm Workpiece thickness 3-150 mm Motorized adjustable Pressure roller diameter 50 mm in the infeed of the machine Industrial PC 12 inch Operating System Windows XP, E Touch screen Program Memory for 100 programs 1 transverse grinding unit Sanding belt dimensions 5,400 × 150 mm Belt speed 2-20 m/s frequency-controlled Drive power 15 KW Pressure fin system Blasting device, controlled depending on the workpiece 1 longitudinal grinding unit Abrasive belt dimensions 2,620 × 1,400 mm Belt speed 1.8-18 m/s Drive power, 15 KW frequency controlled, Belt blasting device, controlled depending on the workpiece Synchronous and counter-rotatio ...

This CB Levigatrici NV11.RRT belt sander was manufactured in 2006. It features a maximum working width of 1100 mm, operates on 400 V / 50 Hz, and has a total power of 48 kW. Weighing 2460 kg, its a robust choice for your sanding needs. Consider the opportunity to buy this CB Levigatrici NV11.RRT belt sander. Contact us for more information about this machine.

Key data: 1350 mm, 2 , 150 mm

BÜTFERING AUTOMATIC GRINDING MACHINE SKO 213 RC

Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Webbing Curve/ 45 Degree Curve/ Conveyor Curve Year of Make: 2011 Manufacturer: Interroll Condition: Good (Used) Outer length: approx. 2100 mm Inner length: approx. 800 mm Total width incl. motor: approx. 1500 mm Total width without motor: approx. 1300 mm Belt width: approx. 1050 mm Conveyor width: approx. 1000 mm Height of the side guide: approx. 200 mm Material: Steel/ Aluminum Color: Galvanized -Blue Including SEW motor (0.75 KW) Including side guide Stock: 2 pieces Price per piece Internal Article Number: 2026022402 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for you ...

Key data: 190 mm, 2

Grinding Machine HESS Double-Sided Grinding Machine Type: GLORIA Year of Make: 1995 CE Grinding width 190 mm Grinding thickness 4 – 180 mm Sanding shoe and brush from above Sanding shoe and brush from below Oxyd ceramics are wear-free and therefore maintenance-free Motorized height adjustment with digital display Shortest workpiece length 300 mm oscillating abrasive belts Sanding belt blow-off nozzle Workpiece transport via conveyor belts Sanding belt width 200 mm x sanding belt length 1600 mm Grinding motor 2 x 4 kW Feed speed infinitely variable 5-25 m/min. Feed motor 0.75 kW Height adjustment 0.18 kW Sanding belt speed 24 m/sec. Working height – table height 830 mm Suction connection nozzle diameter 2 x 160 mm Extraction air volume 2x2000-2500 m³/h Machine dimensions: Length 1660 mm x width 1030 mm x height 1820 mm Height with suction nozzle 1930 mm  ...

Code: 0312 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 11 - Norme CE Automatic calibrating sanding machine with 2 belts and movable head for furniture, carpentry, custom-made furnishings, panels, solid wood, tables, composite materials and various - CE Standard Steel enblock Conveyor plane provided with a thick rectified steel structure Sanding belt motors placed inside the base Rubber conveyor belts structured in 3 cloths and sectionated in rings for constant centering on the plane Base with thickness sheet up to 30 mm Movable head using big lifting columns Technical data: Working width 1350 mm Working thickness 3-130 mm Fixed working surface height 900 mm Feed speed from 5 to 30 mt/min Belt dimensions 1400 x 2620 mm Working thickness display Composition: 1° Group Steel Calibrating Roller diameter 280 2° Group Rubber Sanding Roller diameter 300 Cle ...

Key data: 700 mm

Band saw Bäuerle Roll diameter 700 mm APA guides at the top and bottom! Runs great! Guided tours in a first-class condition Used machine Accessories lots of band saw blades

Key data: 1350 mm, 3 , 120 mm

Weber LCE 2000 wide belt sanding machine with lift table loading ex site for sale.

Flat conveyor belt on aluminium substructure Length of the strap 515 cm, width of the strap 85 cm With the regulation of the amount Conveyor belt mobile, on wheels

- With chassis - Belt length, between axles: 6'500mm - Belt width : 300mm - Motor: 400V, 50Hz - With large inlet hopper attachment - Dumping height : approx. 1200mm - Hopper width: 1000mm - With rack and pinion winch - In good condition

Flat conveyor belt on aluminium substructure Length of the carrying strap 410 cm, width of the carrying strap 85 cm With the regulation of the amount Conveyor belt mobile, on wheels

Used double-belt press with a stainless steel frame made by Flottweg, type: PD10000. Electrically driven with infinitely variable speed control. Belt width: 1200mm. Integrated belt cleaning with high-pressure water. Brush cleaning for the upper belt. Pneumatic and infinitely variable belt mounting and adjustment. Replaceable dosing box. Main motor power: 5.5kW. Brush motor power: 1.1kW. Hourly capacity: 10,000 kg, depending on fruit type and ripeness. Weight: 1.8 tons. Electrical power supply: 400V/16A/12kW. Required air pressure: 8-10 bar.

Flat conveyor belt on aluminium substructure Length of the carrying strap 395 cm, width of the carrying strap 80 cm With the regulation of the amount Conveyor belt mobile, on wheels

Flat conveyor belt on aluminium substructure Length of the strap 355 cm, width of the strap 60 cm With the regulation of the amount Conveyor belt mobile, on wheels

Flat conveyor belt on aluminium substructure Length of the carrying strap 415 cm, width of the carrying strap 85 cm With the regulation of the amount Conveyor belt mobile, on wheels

Flat conveyor belt on aluminium substructure Length of the carrying strap 410 cm, width of the carrying strap 85 cm With the regulation of the amount Conveyor belt mobile, on wheels

SCM calibrating machine model SANDYA 20 RRR 135, with 3 belts: -1st belt with roller D=250mm in grooved steel -2nd belt with roller D=250mm in 55 shore rubber -3rd belt with rubber roller D=320mm in 35 shore rubber - 3-belt motors: KW 15 + 11 + 8.8/11 2 speeds - pneumatic on/off exclusion of the groups, from the control panel - pressure shoes on all 3 rollers - development of abrasive belts 2620mm - Electronic oscillation of the belts, for lower air consumption - automatic table positioner, with digital measurement reader - Advancement mat in good condition - pneumatic belt centering - Feed speed variator - inlet and outlet support roller conveyor Machine according to CE standards, year 1999 VISIBLE INSTALLED AND OPERATING UNTIL JUNE 2026

A two-unit sanding machine Sandingmaster is available. Working width: 1100mm, max. workpiece width: 1000mm, max. workpiece height: 150mm, sanding belt dimensions X/Y: 1130mm/1900mm, feed: 14m/min. Machine dimensions X/Y/Z: approx. 3150mm/1500mm/1900mm, weight: approx. 2500kg. Including approximately 50 sanding belts with different crownings. Documentation available. An on-site inspection is possible.

Flat conveyor belt on aluminium substructure Length of the carrying strap 260 cm, width of the carrying strap 60 cm With the regulation of the amount Conveyor belt mobile, on wheels

Flat conveyor belt on aluminium substructure Length of the strap 410 cm, width of the strap 78 cm With the regulation of the amount

Cooling capacity 12 kW Working temperature range : +55°C (medium) The device has: - 1 compressor - Separate container for medium - Barrel pump - Radiator - 1 x Fan The device after maintenance, fully functional 3-month operating warranties in Poland

TECHNICAL DATA: Table size: 980 x 750 mm Tilting table Flywheel size: Ø 800 mm Saw blade length: max. 5770 mm / min. 5680 mm Installed power: 4 kW

Transnorm leading feed belt conveyor with overdrive GF 1720/1700/1650/1200/1000-700/600-600/500 RA2468 (NL-NB-GuB) Technical data: Conveyor length (NL): 1720, 1700, 1650, 1200, 1000 mm frame width (NB): 700 or 600 mm belt width (GuB): 600 or 500 mm Overall height (BH): 80 mm Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Drive: overdrive Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: Übertrieb scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-m ...

Two Groba ascending conveyors are available. 1) Length: 5700mm, height: 2900mm, outer corrugated edge width: 540mm, inner corrugated edge width: 480mm, cleat height: 35mm. 2) Height: 3500mm, length: 4600mm, width: 500mm, cleat height: 35mm.

Find more here - / Contact us at -

Used machine Grinding height 340 mm Belt speed 22 m/s Table width 1,400 mm Table length 2850 mm Sanding belt length 7,800 mm Sliding range 950 mm Weight approx. 1200 kg

Belt sander manufactured in 2008. This TECNOLEGNO COMPACT 52 is a 5-aggregate sander designed for sanding edges and profiles. If you are looking to get high-quality sanding capabilities, consider the TECNOLEGNO COMPACT 52 machine we have for sale. Contact us for further details.

Belt sander manufactured in 2015. This Kundig Premium-1 1100K features a supply voltage of 400 V/AC and a control voltage of 24 V/DC. It operates at a current of 24.90 A and has a power rating of 12.62 kW. If you are looking to get high-quality sanding capabilities, consider the Kundig Premium-1 1100K machine we have for sale. Contact us for further details.

A Kittner food conveyor is available. Width: 600mm, total length: 8300mm, motor power: 370W, belt speed: 6.6m/min, angle: 31.5°, conveying height: 3300mm. Documentation available. An on-site inspection is possible.

Bütfering ECO 111 Electronic Wide-belt calibration fine grinding machine Contact Roller Unit 85 SH CPS electronically controlled link sanding shoe Working width 1100 mm Terminal for various work programs with selector switch and LED display Motor power approx. 11 kW Brush cleaning unit RTE additional compact roller table in the infeed RTA additional compact roller table in the spout Machine is WORKSHOP OVERHAULED in TOP CONDITION From stock Lieboch 

Code: 0330 Brand: FBR Model: L 85/1500 - CE Standard Automatic belt sanding machine with double gooseneck for wood, joinery, furniture, window frames, aluminum, metals, and various materials - CE Standard Technical data: Work surface dimensions mm 1450 x 700 Automatic table lift Vertical stroke mm 750 Motor power 3 Hp three-phase Max belt length mm 4500 Belt width mm 120/150 Suction port diameter mm 100 Overall dimensions mm 2550 x 1250 x 1550 h Weight kg 320

Transnorm conveyor belt GF 1740-600-500 RA2478 Technical data: Conveyor length (NL): 1740 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 1740 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports and side guides Für eine ...

Worm Screws Length 6000, Width 260

I am selling a wide belt sander OTT MEGA TR11, built in 1996. Configuration: Hard-rubber calibration cylinder Combination unit rubber cylinder + pneumatic shoe with segment control. Working width 1100mm. Electronic height adjustment with digital display. 3-160mm 1 motor 11kW 2 feed rates. Sensitive adjustment of the shoe position. Pneumatic adjustment of the shoe and cylinder pressure. Condition LIKE NEW ! The machine worked very little. Available the same.

Continuous conveyor  inclined conveyor Manufacturer : Lippelt Type : Inclined conveyor Year of construction : 2010 380 V 50Hz 0.12kW On castors Dimensions : W:77cm D: 157cm H: 126cm Belts width 60cm Details see picture    

 Proofing belt support tilting planks Bakery Combi Manufacturer : Ringoplast Type : Bakery Combi Dimensions : 580x390x48 mmInterior dimensions : 567x377x45 mmMaterial : PolypropyleneWeight : 950 gSee pictureShipping costs please ask

Fermentation belt carrier tilting planks with trolley32 pieces tipping planks with trolleyManufacturer: RingoplastType: Baked goods CombiDimensions: 580x390x48 mmInner dimensions: 567x377x45 mmMaterial: PolypropyleneWeight: 950 gWe have several in stockShipping costs please ask for details see picture

Code: 0343 Brand: PUTSCH MENICONI Model: SVP 950-M - CE Standard Manual vertical panel saw for carpentry workshops, for vertical and horizontal cutting of panels, semi-finished products, furniture, doors, window frames, plastics and composite materials - CE Standard Technical data: Cutting length 5300 mm Cutting height 2200 mm Max cutting thickness 80 mm Motor power 7,5 Hp Blade diameter 300 mm Blade speed 5000 rpm Automatic electric sliding table to prevent damage to the support strips during horizontal cuts Small parts support device Liftable castor device for panel sliding Overall dimensions of assembled machine: mm 6500 x 1500 x 3000 h Overall dimensions for transport: Frame mm 6500 x 600 x 2350 h - Weight kg 590 + Column mm 3100 x 1130 x 1150 h - Weight kg 600

OTT MEGAtronic 111 Wide-belt calibration fine grinding machine 1. Grinding Unit Calibration Roll Unit 2. Grinding unit electronically controlled link sanding shoe unit Working width 1100 mm Feed speed 5 + 10 m/min Motor power grinding unit approx. 11 kW Machine is WORKSHOP TESTED  from stock Lieboch

Belt conveyor / conveyor belt / belt Colour: Light grey Year of Make: 2013 Manufacturer: AMI Fördertechnik Condition: Used Model: Belt/ KGF 65 Total length: approx. 2560 mm Total width incl. motor: approx. 680 mm Total width without motor: approx. 620 mm Belt width: approx. 590 mm Strap Type: Longitudinal Grooves Aluminum frame Frame height: approx. 70 mm Including SEW engine ( 0.37 KW) Stock: 9 pieces Price per piece Internal Article Number: 2026032602 Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloa ...

AGICOM recycling machines: High-quality used conveyor belt for professional material transport within a work process (e.g. cable recycling plant). The conveyor belt consists of a robust steel structure with a special tub structure that prevents the lateral penetration of fine material into the guides. The side walls are light and flexible, the conveyor belt is equipped with rollers and can be easily moved. Loading and unloading height are adjustable. The conveyor belt can be equipped with a roller magnet for the iron separation of the transport material. Year of manufacture: 2018

working range 200 mm daylight 12 cm setting plane 150x50x113 working hight 103 cm

Transnorm conveyor belt GF 15600-900-800 RA2217 Technical data: Conveyor length (NL): 15600mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA47/T DT80 N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 15600 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor spe ...

Calibration and fine grinding machine, wide-belt grinding machine Kundig Brilliant with electronic segmental sanding shoe, inclined sanding unit and paint sanding. A video of the running machine can be sent on request. Ideal automatic sanding machine for interior finishing companies, also suitable for intermediate paint sanding Binding machine with combination unit and electronic link pressure bar Edge segments can be switched on and off Segment width of the pressure beam 22mm (ideal for intermediate varnish sanding) Pneumatically Feeding Calibration Roller Grooved Rubberized Roller with Grain Compensation Drive motor 11kW Stepless cutting speed 3 - 15 m/s due to frequency converter Webbing feed infinitely adjustable from approx. 3 to 15 m/min Belt blow-off device workpiece-controlled Constant table height approx. 950mm by adjusting the upper part of the machine, thus als ...