rubber belt used for sale

Transnorm curved belt conveyor replacement part TS1500 RA2399 Technical data: Model: TS1500 Transnorm Item number: 6004-2RS 12 pieces inkluding: Bearing Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: No information

Manufacturer: Purete, Type: Transportband, Year: 2017, Control: yes, Working length mm: 1900, Working widht mm: 1300, Total hight mm: 890, Belt width: 1300, Own controller: yes, Total hight mm: 890, Engine power kW: 0,5, Feeding speed min-max m/min: 5-20, Feeding speed continous adjustable: yes, Year :2017

Transnorm spiral helix belt curve conveyor left 90°-825-600 IR600 RA2401 Technical data: Type designation: belt curve conveyor TS 1600-105 Helix frame width (NB): 825 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 260 mm rising) Incline: 260 mm / 90° = 1040 mm / 360° Support feet: optionally available Conveying speed (v m/s): 0.4 Drive: SEW gearmotor Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT106 (wear see pictures) year of construction: 2006 Optionally available: Supports Side guide one and both sides frequenzy converter for steples speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) scope of delivery: including Movimot frequency converter, without supports and side guides Driven: YES N ...

Manufacturer: Purete, Type: Transportband, Year: 2017, Control: yes, Working length mm: ca.1950, Working widht mm: 1300, Total hight mm: 880, Belt width: 1300, Own controller: yes, Total hight mm: 880, Engine power kW: ca.0,5, Feeding speed min-max m/min: 10-20, elektronisch regelbar: yes, Working hight adjustable mm: yes, Year :2017

Manufacturer: Bütfering, Type: Profiline SCR/RRR, Year: 2007, Sanding width mm: 1350, Sanding hight mm: 3-160, Number of sanding belts: 3, Sanding belt dimensions: 13702620, Rollers: 3, Rubber roller: 1, Steel roller: 2, Shore roller 1: 70 , Bürstenaggregate: 1, Band 1 Leistung kW : 37, Band 2 Leistung kW : 30 , Band 3 Leistung kW : 22, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 7, Constant table hight: yes, Vacuum table: yes, Weight in kg: ca. 2020, Year :2007

Manufacturer: Weber , Type: KSV + KUV 2250, Year: 2005, Double sided sanding line: yes, Sanding width mm: 2250, Sanding hight mm: 120, Number of sanding belts: 2, Walze 3 Shorehärte : 2, Band 1 Kombiaggregat: no, Band 2 Gleich und Gegenlauf: ca.40, Band 3 Kombiaggregat Walze/Schuh: ca.40, Band 4 Kombiaggregat Walze/Schuh: ca.2,5, Band 4 Leistung kW : 1, Band 4 Drucklammellenband: yes, Combi unit roller/shoe: yes, Year :2005

Manufacturer: Bütfering, Type: Vega 213 CE, Year: ca.1995, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: ca.2120 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Band 1 Leistung kW : 12 gleich und gegenlauf, Band 2 Kombiaggregat Walze/Schuh: 15, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 6-20, Feeding engine kw: 1,2, Intermediate sanding of lacquer: no, Vacuum table: yes, Segment sanding shoe: yes, Bürstaggregat : yes, Durchmesser/ Bürstenbesatz: 125, Year :ca.1995

Manufacturer: unbekannt, Working length mm: 19000, Working widht mm: 700, Total hight mm: 200, Engine power kW: ca.5, Feeding speed max m/min: regelbar, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Belt 1 length width mm: 6000, Unit 1: 2, Belt 2 length width mm: 3500, Unit 2: 2,

Manufacturer: Heesemann, Type: FGA 6, Year: 1989, Monting of the machine: L, Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Rollers: no, Cross sanding unit: no, Shoe unit: yes, Shoe unit: yes, Elektronische Tastung mm: yes, Power belt 1 in kW: 11, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: 40, Brushing unit: yes, Year :1989

Manufacturer: Sandingmaster, Type: SCSB 2 - 900, Year: 1980, Monting of the machine: Walze / Schuh, Sanding width mm: 900, Sanding hight mm: 140, Number of sanding belts: 2, Sanding belt dimensions: 930 x 1920, Band 1 Leistung kW : 11, Band 2 Leistung kW : 11, Year :1980

Kersting belt conveyor Ejector Placer Separator GF 2880-510-400 RA2409 Technical data: Conveyor length (NL): 2880 mm frame width (NB): 510 mm belt width (GuB): 400 mm Overall height (BH): 780 mm intake and 640 mm output Supporting feet: includet Conveying speed (v m/s): with Frequency converter for stepless speed change Drive: Drum motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 100 mm parcele size: (max 550) x (390...420) x (max 200) LxWxH Controling and pneumatic included Optionally available: Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2880 Nominal / outside width in mm: 510 Belt width in mm: 400 Driven: YES Engine type: Trommelmotor KW: 0,55/S1 Conveyor speed m / s: freely adj ...

Manufacturer: Boere , Type: BKS 900 / BBBg20/2, Year: 1985 / 1991, Monting of the machine: Walze Schuh + Walze/Schuh/Bürste, Double sided sanding line: yes, Sanding width mm: 900, Sanding hight mm: 150, Number of sanding belts: 4, Continous adjustable feeding speed m/min: 5 - 25, Rubber roller: yes, Shoe unit: yes, Shoe unit: yes, Schleifbänder unten: 2, Brushing unit: yes, Year :1985 / 1991

Key data: 1150 mm, 3 st.

CALIBRATING SANDING machine with 2 belts + brush unit model INFOTRONIC NEPTUN 115 RKSAVE . made in ITALY second-hand machine working conditions Excellent, machine as new machine with inverter on the carpet machine with CE regulation: YES instruction booklet : YES universal machine for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various Technical data: Max. working width mm.1150 Max working height mm.150 Min working height mm.3 Dimensions of abrasive belts mm.1165 x 2620 Advancement speed belt , with inverter , from 5 to 15 m/min Automatic centering Composition ( 1° e 2° unit , motor power Hp 25 . 3 speed ) : 1st unit : Rubber Roller diameter mm.170 - shore 45 Automatic blowers for cleaning abrasive belts 2nd unit : Combined Steel Roller + Electronic Segmented pad Steel roller diameter mm.170 Ee ...

Manufacturer: Heesemann, Type: FGA 6, Year: 1990, Monting of the machine: L, Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Cross sanding unit: no, Shoe unit: yes, Shoe unit: yes, Elektronische Tastung mm: 40, Power belt 1 in kW: 11, Constant table hight: 950, Vacuum table: yes, Pressure pads for short workpieces: yes, Brushing unit: yes, Year :1990

Key data: 1350 mm, 2 st.

CALIBRATING SANDING machine with 2 belts (2 independent motors) model COSTA series SK 5 CC 1350 second-hand machine working conditions Excellent , machine as new machine with inverter on the belts and on the carpet fixed table, moving head machine with CE regulation: YES instruction booklet, CE declaration of conformity: YES for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data : max. working width mm. 1350 max working height mm. 160 min working height mm. 4 dimensions of abrasive belts mm.1380 x 2620 advancement speed belt , with inverter , from 3 to 15 m/min (motor power Kw 1.1) automatic centering perforated carpet (there is no vacuum group) composition (2 belts, 2 independent motors) : 1st unit : rubber calibrating roller - diameter mm 200 - shore 85 - motor power Hp 10. with inverter  ...

Technical specification Conveyor belt width: 1.87 m Length of the vertical part 8.6 m Lifting height: 5.2 m Total length in horizontal view: 26 m Belt depth in the horizontal loading area: 0.55 m Motor power: 7.5 kW + 5.5 kW If you have any questions, please call us: +48 696 072 985

Technical specification Conveyor belt width: 1.87 m Length of the vertical part 8.6 m Lifting height: 5.2 m Total length in horizontal view: 26 m Belt depth in the horizontal loading area: 0.55 m Motor power: 7.5 kW + 5.5 kW

Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible.

Type: TBS19KT Serial number: 700045 Year of construction: 2019, never used Cutting height: max 230 mm Cutting width: max 190 mm Saw blade: 1750 x 16 x 0.45 mm Saw speed: 17 m/sec Power: 3 x 400V, 50Hz, 1.1kW Dimensions: 490 x 620 x 1000 mm Weight: 87 kg Machine never used, new out of the box

Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative ...

We are selling here a bone saw from the manufacturer Berkel, type BS 1750 RN in a very good used and functional condition. The machine runs on 400 volts, 1.1 kW, identical to Mado MKB 649, completely stainless steel, table 55x50 cm, workshop tested, immediately ready for use, dimensions W/D/H 55/50/90 cm, others on request.

Pinomatic cross conveyor for a planing and sawing line Year of construction 2001 Manufacturer Pinomtatic OY Type POS 9+10 S/N P1033 motorised cross conveyor with 7 chain hoists length of the arms: : 6000mm Width of the cross conveyor up to 4000mm ( variable adjustable ) Height: 900mm 6 chain hoists fixed mounted 1 chain hoist can be variably adjusted Voltage 230/ 400VAC

Key data: 1100 mm

DMC Polisand 110 RP wide belt sanding machine year 1998 Varnish Wide belt sanding machine total installed power approx, 23 KW Sanding width 1100 mm Workpiece thickness up to approx, 170 mm Motorized height positioning with digital reader Vacuum transport belt, F,LLI FERRARI vacuum unit with motor power 4 KW Feed motor power 1,50 KW Aggregate 1: grooved rubber sanding roller, with blowers Aggregate 2: sanding pad, with blowers Both groups are driven by an 15 KW motor 380 V / 50 Hz weight 2300 Kg Dimensions: 2,45m x 1,85m x 2,0m

Belt spiral mixer for powder and granules with hydraulic mast - 950mm diameter - Pneumatic outlet flap - approx. 120 litres filling volume - made of stainless steel - Drive power: 2.2 kW - 52 shaft revolutions per minute - Adjustable shaft speed - With hydraulic mast (0.55 kW)

used sand core shooting machine for foundries with transport belt discharge, so called core belters with shouting volume of 5 liters, mainly used in the fitting or faucet industry. used Hot-Box core belter see pictures hydraulik unit: 4.0 kW heating devices: 2x 13 kW core box dim. : 500x250x110 mm more information on request

Connected load: 0.32 kW Weight: 125 kg Manufacturer: Tassold GmbH Model: Rotary Table Year of Make: 2022 Connected load: 0.32 kW Weight: 125 kg Dimensions of the rotary table: Length: 1,800 mm Width: 1,000 mm Height: 1,200 mm Diameter turntable: 1,000 mm Dimensions of the infeed belt: Length: 1,000 mm Width: 600 mm

: 920229 grinding band dimension: 75 mm x 2000 mm wheel dimensions: 250 mm weight: 90 kg volt: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 900mm, max. workpiece height: 100mm, sanding units: 1, sanding belt dimensions X/Y: 2620mm/1150mm, feed speed: 2m/min-14m/min, compressed air requirement: 1800m³/h, operating pressure: 5bar-7bar, weight: approx. 1800kg. The feed belt is no longer grippy. Documentation available. On-site inspection is possible.

workpiece length: 1500 mm stroke: 0 mm swing dia.: 500 mm total power requirement: 30 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A 5-roller Heesemann wood sanding machine is available. Sanding belt dimensions: 2620 x 1350mm, sanding width: 1300mm, working height: 1000mm, roller diameter: 250mm, belt speed: 24m/s, suction volume: 89.5m³/min, suction nozzle diameter: 250mm + 180mm, air speed: 20m/s. Dimensions X/Y/Z: approx. 5200mm/2300mm/2300mm, weight: approx. 13000kg. Documentation available. On-site inspection is possible.

A new belt roasting machine for nuts in the food industry is available. Fuel: diesel/electricity/gas/LPG, output: 2kW, machine dimensions X/Y/Z: approx. 3600mm/1900mm/1950mm, operating hours: 31h. Roasting capacity per hour: hazelnut kernels: 160kg, shelled peanuts: 150kg, shelled peanuts: 35kg, shelled pistachios: 90kg, sunflower seeds: 70kg, pumpkin seeds: 70kg, almonds: 120kg, cashew nuts: 150kg, chickpeas: 120kg. Including salt kettle with a capacity of 35kg and fully automatic high-pressure belt washer. Documentation available. On-site inspection is possible.

width of the strips: 100 mm band length: 610 mm work table:: 170x125 / 265x150 mm : 16 mm turning speeds: 2000 U/min roll diameter: 16, 23, 29, 41 und 53 mm total power requirement: 0,45 kW weight of the machine ca.: 114 Kg dimensions of the machine ca.: 0,6 x 0,5 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various conveyor belts, Z-slope conveyors, Z-track conveyors, belt conveyors and a conveyor belt with cleats from the manufacturers Göztepe and Lübke are available. Documentation for Göztepe available. On-site inspection is possible.

Two high-precision Wipotec checkweighers are available. 1) Wipotec OCS/EC, year of manufacture: 2014, throughput: 150 products/min, max. belt speed: 0.75m/s, weighing range: 200g-300g. 2) Wipotec OCS/HC-A-200, year of manufacture: 2014, throughput: 200 products/min, max. belt speed: 1m/s, max. weighing weight: 750g. Documentation available. On-site inspection is possible.

Two Rothstein and Plast Service conveyors are available. 1) Inclined conveyor Rothstein RO80 3000x300, year of construction: probably 2005, length: 3000mm, width: 300mm, max. load: 7kg/m, rated power: 0.18kW. 2) Ascending conveyor Plast Service. On-site inspection is possible.

A VSB Verbufa for the positioning of minced meat, hamburgers, cookies, balls and sticks with high cycle output in packaging and packaging machines is available. Output: 110 portions/min, machine dimensions X/Y/Z: approx. 1700mm/950mm/1650mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

An Intralox belt, buffer table and Stöber conveyor belt are available. Belt width: approx. 1150mm, belt length: approx. 4900mm, frame material: stainless steel. Including 4 belts. Documentation available.

A brand new AME belt filter system for continuous cleaning of cooling lubricants (e.g. emulsions, oils) using the gravity principle is available. Emulsion capacity: 150l/min, oil capacity: 90l/min, tank volume: 800l, machine dimensions X/Y/Z: approx. 1900mm/1000mm/1300mm, weight: approx. 410kg. Documentation available. On-site inspection is possible.

Stainless steel bar belt for Technopool spiral cooler Length (linear metres): approx. 260 - 280 m Total width: 900 mm Working width: 760 mm Distance between rods: 30 mm Availability: as of now

A chip conveyor for DMG Mori machines is available. Height: 1650mm, width: 1870mm, length: 3560mm, weight: approx. 600kg. Without pump and skimmer. Approximately half of the rails for further transportation are defective. Documentation available. On-site inspection is possible.

Year of construction 2006 Chip conveyor belt Mobile substructure Delivery date: immediately Ref: BU250081A Price on request. We supply and install worldwide.

A waterproof trough conveyor belt, therefore well suited for wet goods such as a food washing system (vegetables/fruit), is available. Material: stainless steel, belt width: 370mm, trough width: 400mm, trough height: 150mm, total length: 12300mm, total width range: 500mm-600mm. Without motor. Documentation available. On-site inspection is possible.

Double-Belt weighing system for large volumes of 1-50kg of loose materials as bio-pharmaceuticals, food, farm chemical and fertilizer, building materials, ceramcis, chemicals, drug ingredients, seeds, cereals, charcoal, flow soil, plastic grains, etc. - Specifications: 65 liter hopper | all product contacting parts in stainless steel (SS340) | frame in mild steel with painted surface | Accuracy (depending on product): 0,5-1,0% | pre-Set-Option for 10 programs | max. speed of the machine in neutral: 15 cycles/minute. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available  ...

I-Z- or L-shaped conveyor, extra large version, to transport product from vibration feeder to weighing unit. - Open construction, hygenic, water proof plastic conveyor. 380V/1,1kW, dimensions and weight depending on final system layout. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

I-Z- or L-shaped link belt conveyor, extra large version, to transport product from vibration feeder to weighing unit. - Open construction, hygenic, water proof plastic conveyor. 380V/1,1kW, dimensions and weight depending on final system layout. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Small I-Z- or L-shaped link belt conveyor to transport product from vibration feeder to weighing unit. - Open construction, hygenic, water proof plastic conveyor. Specification depending on customized design and size. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Infeed Conveyor, transport system with extra large plastic containers to transport the product from vibration feeder to weighing unit, stainless steel, 380V/1kW, dimensions and weight depending on final system layout. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Small Mini-Infeed Conveyor, Z-shaped, transport system with plastic containers to transport the product from vibration feeder to weighing unit, stainless steel, dimensions and weight to suit customized system. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

I-, Z-, or L-shaped belt conveyor to transport small and large, wet, frozen products towards the weighing head unit. Open construction, corrugated sidewalls, water proof, parts in contact with the product are made of polyurethane and are certified to FDA 21 CFR 177.2600. - Specifications: dimensions of conveyor boxes: L(according to product requirements)xW250xH50mm | stainless steel frame | conveying speed: is adjustable | conveyor dimensions: L(depending on the gradient)W450xH3500mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customi ...

I-, Z-, or L-shaped belt conveyor to transport small and large, wet, frozen products towards the weighing head unit. Open construction, corrugated sidewalls, water proof, parts in contact with the product are made of polyurethane and are certified to FDA 21 CFR 177.2600. - Specifications: dimensions of conveyor boxes: L(according to product requirements)xW250xH50mm | stainless steel frame | conveying speed: is adjustable | conveyor dimensions: L(depending on the gradient)W450xH3000mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customi ...