rt 350 used for sale

Doka Floor Props Eurex 30 Top 350 †Reliable Support for Your Construction Site! 🚧 Our used floor props combine strong performance, easy handling, and trusted Doka quality. A great solution for anyone looking for dependable formwork equipment at an attractive price. 👌   🔧 Product Highlights: ✔ High load capacity up to 30 kN. ✔ Adjustable extension length up to 3.50 m [511-116]. ✔ Fast and accurate adjustment thanks to clearly visible hole numbering. ✔ Used, inspected, and ready for immediate use. ✔ Space-saving storage on stacking pallets with 40 props per unit. 📦   📌 Available from stock in Florida, USA With Form-on, you get reliable products for everyday construction needs †fast, straightforward, and fairly priced. 🤝   📩 Contact us today and get your customize ...

EDM Charmilles Roboform 350 - EDM Roboform350 BJ 2006 EDM MV2400 BJ 2021

The following are offered: 3x Kaeser compressors, 1x Gieb compressor, 1x Atlas Copco compressor and 1x Maschinen- und Behälterbau pressure vessel. 1) Gieb compressor, 750/250-11, year of manufacture: 2005, max. operating pressure: 11bar, intake capacity: 750l/min, power requirement: 4.0kW. 2) 3x Kaeser EPC 630-150 compressors, year of manufacture: 1995, max. operating pressure: 10bar, displacement: 630l/min, motor power: 3.0kW. 3) Atlas Copco LT compressor with sound enclosure, operating pressure: 15bar. 6) Maschinen- und Behälterbau pressure vessel, volume: 350l, year of manufacture: 1997, max. operating pressure: 16bar, temperature range: -10°C to +50°C. An on-site inspection is possible.

x-travel: 1800 mm y-travel: 1600 mm z-travel: 1400 mm Control: Siemens 840 C total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BOY 35 E injection molding machine in good condition Type : 350-92 35E Year: 2013 Screw diameter : 28 mm Injection pressure: 1639 bars Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr Clamping Force: 35 Tons Distance between tie bar bar: 280 x 254 mm Min mould height : 200 mm Maw daylight between platen : 500 mm Dimensions: 2400 x 820 x 1950 mm Weight: 1195 kg + BOY option : a laminar flow and carrot peck

x-travel: 1800 mm y-travel: 1600 mm z-travel: 1400 mm Control: Siemens type: 840 D size of pallet: 1000x1250 mm numbers of pallets: 2 : 360 ° Table load: 3500 kg Tool changer: Pos. chip conveyor: Cooling through the spindle: bar workpiece swivable +/-: 2100 mm positioning accuracy: 0,01 mm spindle taper ISO: 50 transmission ratio: 2 Torque: 1130 NM turning speeds: 25-10.000 U/min Feed: 1-40.000/50.000 mm/min total power requirement: kW weight of the machine ca.: 43 t dimensions of the machine ca.: 11x9x34,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, prod ...

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m 2x Ram head 250 x 250 mm Chip conveyor Mist extraction unit Coolant system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible  ...

Key data: 350 mm

Saw blade diameter: 350 mm Cutting area flat 90°: 170 x 100 mm Flat sawing area 45°: 120 x 100 mm Cutting range round: 120 mm Pneumatic saw blade feed Coolant pump / minimum quantity spraying device Pneumatic material clamping Countershafts for sawing stainless steel Length stop with automatic positioning up to 6200 mm Roller conveyor with 1000 mm left Weight: approx. 800 kg

Offer 24212 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - Left up to 45° - Right up to 30° - Saw blade speeds 34 + 68 1/min - Drive 400 V / 2 / 2.6 kW - Coolant device - Roller conveyor feeder 2000 mm - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

AIRCOOLED CHILLER SWEGON COBALT PRO HE LN 37.2 350 KW Cooling capacity: 350.0 kW / 99.52 tons (12/7 — 35°C) Year of manufacture: 2015 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 2 pcs. Bitzer CSH7593-90Y-40D (screw) Type of refrigerant: R1234ze Number of fans: 8 pcs. (Frequency inverter) Dimensions: 5.0x2.28x2.45 m Weight: 4480 kg Working hours: 620/870 h. Condition: Good

Machine had annual maintenance by Okuma CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine 80 Ww compartment, Main spindle with C axis, counter spindle with C axis, Y axis slide top / milling spindle, Mounting HSK 63, Stepless B axis as milling spindle, Center width 1500 mm, Spindle bore 80 mm, Max. circulation Ø 550 mm, Swivel Ø 350 mm, Revolver lower 12 ply with applied revolver. tools, Interlite Compact Filter System 900 l, suction, Spindle running time approx. 18300 h, Päneförderer, Tool changer gripper arm completely renewed, high-pressure cooling, WZG measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Sub-spindle Kitagawa B - 208,

DESCRIPCION/CARACTERISTICAS: Impresora Offset para etiquetas de 5 colores, unidad flexo y troquelado en línea. Máquina equipada con: • Unidad de desbobinado • Guiador de banda BST • Secado UV Led (5) • Barra de volteo • Unidades Offset: 5 • Unidad flexográfica • Cámara de registro BST • Lavador automático • de rodillos de tinta • Introductor automático de planchas • Unidad de troquel semi rotativo con cilindro magnético • Unidad de rebobinado con Slitting (cuchillas • (desmalle) • Pupitre de entintado + CIP 3 para entonación automática de color • Atemperador de baterías • Mesa de perforado de planchas CCD • Autoregistro

pressure: 35 t no. of strokes: ca 72 Hub/min dayligth: 195 mm total power requirement: 1,5 kW weight of the machine ca.: 330-400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 97400 € : 1840.86 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommende ...

Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing fu ...

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm stroke: 100 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 / 30 / 45 / 90 m/min total power requirement: 2,6 kW weight of the machine ca.: 375 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1.5 / 2.2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. ...

saw blade diameter: 800 x 800 x 1500 mm cutting diameter: 200 mm stroke: 150 mm dimensions of the machine ca.: m total power requirement: 3 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 3500 mm plate depth: 1750 mm plate height: 350 mm weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Höcker Polytechnik Type L 350 radial fan for extracting swarf, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or small machine fleets and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Technical data: Motor power: 11 kW Inlet: 350 mm Outlet: 350 mm Air flow rate: 9,770 m³/h Condition: Gebraucht Location: Tauberbischofsheim, Germany

pressure: 600 t ram surface: 3600 x 2500 mm stroke: 350 mm Control: Siemens S 7 no. of strokes: 11 - 44 Hub/min table surface area: 3600 x 2500 mm ram adjustment: 400 mm material width: 500 - 1950 mm material thickness: 0,6 - 2,5 mm mm coil weight: 35 t coil external diameter: 900 - 1900 mm coil internal diameter: 610 mm no. of straightening rolls: 13 straightening roll diameter: 50 mm Stack height: 400 mm stations: 2 total power requirement: kW weight of the machine ca.: 390 t dimensions of the machine ca.: m with reel, Rstraight out Unit, (conveyor system Schleicher) and stacking unit(NSM) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 30 x 50 mm machine weight ab.: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 350 mm dimensions of saw-band: 4640x34,1,1 mm : 355 mm sawband speed: 15-115 m/min weight of the machine ca.: 2800 kg dimensions of the machine ca.: 3050x2190x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mm width: 2000 mm height: 350 mm total power requirement: - kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: 220,9 m Sonderpreis EXW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 - 90 m/min total power requirement: 2,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm cutting diameter: 120 mm capacity 90 degrees: flat: 170 x 100 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: flat: 95 x 100 mm turning speeds: 34 / 88 U/min total power requirement: 0,75/1,5 kW weight of the machine ca.: 340 kg. dimensions of the machine ca.: 0,7 x 1,0 x 1,85 m Features: - Coolant system - Replacement saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 350 mm saw band length: 4640 x 34 x 1,1 mm table height: 860 mm : 350 mm : 15 - 100 m/min : 4,0 kW : 2800 kg : 2200 x 3200 x 2200 mm Display Model Current list price: 55,910 euros Fully automatic band saws with a two-column guide system for production cuts, particularly in materials that are difficult to machine and solid stock. With this machine, MEP offers you a machine that is at the highest technical level and, thanks to the use of the highest-quality materials, features an unmatched, robust, and torsionally rigid structure. An extremely robust saw frame made of gray cast iron provides the necessary stability, which leads to impressive cutting results, and the sturdy gray cast iron columns on which the saw frame glides via preloaded linear guides ensure ensure the highest cutting precision even under maximum load. The modern machine control system (MEP NC 5.0) off ...

cutting diameter: 305 mm capacity 90 degrees: flat: 350 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: flat: 230 x 200 mm capacity 60 degrees: round: 175 mm capacity 60 degrees: flat: 170 x 100 mm cutting speed: 18 - 110 m/min vice: max. 350 mm dimensions of saw-band: 3370 x 27 x 0.9 mm engine output: 1.5 / 1.8 kW weight of the machine ca.: 880 kg range L-W-H: 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF) The data for  ...

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm stroke: 100 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 - 90 m/min total power requirement: 2,6 kW weight of the machine ca.: 375 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 103100 € : 1948.59 € : 2550 mm : 25 mm : 25 mm : 20 mm : 20 mm : 16 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5500 mm : 2000 mm : 1900 mm : 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...

HAUSER 350 x 260 ist ein Kreuztisch für hochpräzise Bearbeitungen mit hoher Genauigkeit und Zuverlässigkeit. Aufspannfläche 350×260 mm; Verfahrwege: 250 mm längs, 200 mm quer; Tischhöhe 180 mm; 5 T-Nuten 10H7 mm, Abstand 55 mm. Maschinengewicht ca. 120 kg; Abmessungen 700×700×180 mm. Ermöglicht enge Toleranzen; typisch für Automotive, Uhrenindustrie, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

HAUSER 350 x 260 mm ist ein Kreuztisch, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsdaten: Aufspannfläche 350×260 mm; Verfahrwege Längs 250 mm, Quer 250 mm; Tischhöhe 182 mm; 5 T-Nuten 14H7 mm. Technische Daten: Maschinengewicht ca. 80 kg; Maße 400×300×200 mm. Ermöglicht enge Toleranzen in Präzisionsanwendungen; typische Branchen: Automobil, Uhrenbau, Werkzeugmaschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

MAGNAGHI RSC 350 ist eine Spitzenloseschleifmaschine, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Schleif-ø 2–85 mm; Hauptscheibe ø350×120 mm (Bohrung 200 mm); Regelscheibe ø250×120 mm (Bohrung 150 mm); Drehzahlen bis 1800 U/min, Regel 18–250 U/min. Daten: 50 Hz 3×380 V; Hauptmotor 10 CV; Gewicht ~2000 kg; Maße L1800×B1000×H1800 mm. Zubehör: Satz Lineale, Lampe, Auswuchtgerät Gt Elettronica VM 23, 2 Abrichtvorrichtungen. Erreicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

HAUSER P 350 ist ein Rundtisch, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazität: Durchmesser der Aufspannfläche 300 mm. Haupttechnische Daten: Durchmesser 300 mm. Ermöglicht das Erreichen enger Toleranzen und eignet sich für Branchen wie Automobilindustrie, Uhrmacherei, Werkzeugmaschinenbau, Luft- und Raumfahrt sowie Medizintechnik. Technische Daten ohne Gewähr

ALLEN Ø 350 ist ein Rundtisch, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazität: Stellraum/Arbeitsmaß Länge 600 mm, Breite 500 mm, Höhe 110 mm. Wichtige technische Daten: Abmessungen L 600 × B 500 × H 110 mm. Ermöglicht enge Toleranzen und eignet sich für Branchen wie Automobil, Uhrenindustrie, Werkzeugmaschinenbau, Luft- und Raumfahrt und Medizintechnik. Technische Daten ohne Gewähr

UNBEKANNT Ø 350 ist ein Rundtisch, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitswerte: Durchmesser 350 mm, 4 T-Nuten, T-Nutenbreite 14H7 mm. Technische Daten: Durchmesser und Nutenmaß als Hauptmerkmale. Eignet sich für enge Toleranzen in Automotive, Luftfahrt, Werkzeugmaschinen und Medizintechnik. Technische Daten ohne Gewähr

OKUMA MAC TURN 350-W ist ein CNC Dreh-Fräscenter mit 2 Spindelstöcke, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Dreh-Ø 530 mm (über Planschlitten), 550 mm (über Bett); Spindelbohrung 62 mm; Drehlänge 1625 mm; Z 1670 mm, X 505 mm, Y ±95 mm (190 mm). Daten: 9 Achsen; C-Achse 360° Auflösung 0,001°; B-Achse Schwenk 210° Auflösung 1°; Spindeldrehzahl bis 5000 t/min; Fräserdrehzahl 6000 t/min; Spindelmotor 22/15 kW. Zubehör: Werkzeugwechsler 44 Plätze, Späneförderer. Ermöglicht enge Toleranzen; Anwendungen: Automotive, Luftfahrt, Medizintechnik und Präzisionsfertigung. Technische Daten ohne Gewähr

: neu : ca. 10 Wochen ab Auftrags : Türkei : 8500 € : 164.05 € : 350 mm : 350x32x63 mm : 45 / 80 U/Min : 45 ° : 45 ° : rund 115 mm / quadratisch : rund 110 mm / quadratisch : rund 110 mm / quadratisch : 5.85 kW : 1100 mm : 1000 mm : 1400 mm : 300 kg Semi-automatic circular saw designed High production rates, ideal for small and mid production Heavy duty gearbox Cast iron structure Foot switch actuation Hydro-pneumatic operation of saw head smoothes descent for optimum cut Pneumatic vice 2 cutting speeds Adjustable head stroke according to the dimensions of the material which has to be cut Piece counter 45° right to 45° left cutting saw blade not included OPTION: saw blade Dm. 350 mm € 180,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 € : 2107.35 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capac ...

B&A REF: 9343 TON: 110 SCREW DIAMETER: 35MM SHOT WEIGHT: 162 STROKE VOLUME: 178CM3 INJECTION PRESSURE: 1955AR PLATEN SIZES: 770 X 730MM DBTB: 480 X 440 MM MIN MOULD HEIGHT: 80MM MAX MOULD HEIGHT: 350MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 850MM EJECTOR STROKE: 125MM CONTROLS: TACTUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 15 SERVO HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE MOTOR: HYDRAULIC

Behringer Eisele VMS 350 Vertikalkreissäge / Metallkreissäge Hersteller: Behringer Eisele Typ: VMS 350 Zustand: NEU Bearbeitungsquerschnitt max. rund bei 90° 120 mm Bearbeitungsquerschnitt max. Rechteck bei 90° 170 x 100 mm Bearbeitungsquerschnitt max. rund bei 45° 120 mm Bearbeitungsquerschnitt max. Rechteck bei 45° 120 x 100 mm Sägeblattdurchmesser 350 mm Sägeblattbreite 3 mm Bohrungsdurchmesser 40 mm Einstellbare Sägeblattdrehzahl 17 U/min / 34 U/min Maschinenoberteil schwenkbar 45-90-45-30° Motorleistung gesamt 1.4/1.9 kW Breite 900 mm Länge x Breite x Höhe 1050 x 900 x 1900 mm

Well used Krauss Maffei free loaded truck to return.

Number of motors: 1 Stück 0: 2500 mm Control: nein Hecht ES 350 single-sided glazing bead saw -------------------------------------- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm 1.5 m touch stop 1.5 m support with support 3 m touch stop Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmGeneral2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® multi-touch control Work spindle (right)Spindle diametre on front bearing90 mmSpindle bore45 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Shan ...

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200 x 88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,4 t dimensions: 1,2 x 0,9 x 1,5 m Display machine - Never used - 45° left/right miter - Head tilts up to 45° for bevel cuts (compound cuts) - Pneumatic dual quick-clamping system - Includes micro-spray system - Includes carbide saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmWork spindle (right)Spindle bore45 mmSpindle diametre on front bearing90 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Shan ...

Max. locking force: 3500kN, clear tie-bar spacing: 710x710mm, min. mold height: 380mm, max. opening stroke: 1300mm minus mold height, max. ejector stroke: 250mm, max. ejector force: 95kN, ejector retraction force: 48kN, rotary table diameter: 890mm, screw diameter K1: 60mm, K2: 35mm, nozzle radius: 15mm, max. injection pressure K1: 2000bar, K2: 2429bar, max. shot weight (PS) K1: 618g, K2: 142g, hot runner: external, core pull connection: DNP Flatface BG3 (large flat-face sealing), centering mandrel: AS + DS, weight: 16.37t, total operating hours: 74,276h, production hours: 66,341h, the second injection unit and the rotary table have not been used for five years, with documentation and linear handling system, regularly maintained in-house. An on-site inspection is possible, the machine is not connected to power.

wire EDM machine, year 2016, CNC Schermo TFT 19 pollici, sistema operativo Windows 7. Used machine. More info & price on IndustrialBuyer.