rt 350 used for sale

; Gross weight [kg]: 3700; Engine: Volvo TAD1341GE; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 576

3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site ins ...

A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...

Injection moulding machine Arburg 420S 1300-350 BJ 2000 without handling

Sandpaper, abrasive paper, sanding cloth, sanding discs, abrasive bodies -Manufacturer: Carborundum-Dilumite, grinding wheel -Outer diameter: 350 mm -Width: 40 mm -Inner diameter: 127 mm -Quantity: 1 piece available -Weight: 5.8 kg

A complete welding system with a robot and peripheral equipment is available. Welding stations: 2, robot travel path: 11000mm, max. workpiece diameter left/right: 2200mm, max. workpiece length left: 4000mm, workpiece length range right: 1000mm-5000mm, welding process: TIG, materials: aluminum/stainless steel, shielding gas: argon, overall system dimensions X/Y/Z: approx. 15350mm/5700mm/4000mm, control unit: Qirox QC2 Advanced. Including suction technology. Documentation available. An on-site inspection is possible.

saw blade diameter: 350 mm cutting diameter: 90 mm stroke: 160 mm mitter cutting - all-position: ± 45 ° turning speed range: U/min voltage: 380 V total power requirement: kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,85 x 1,35 m - S/N: 4296 - pneumatic feed - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brazing line manufactured in 2018. This SCAME BRAZING LINE 50-20-350-GI-DR features a maximum temperature of 1150 °C and operates with an electric power source of 85 kW. The continuous longitudinal conveyor system efficiently moves parts along a passage chamber measuring 50 x 20 x 350 cm. If you are looking to get high-quality brazing capabilities, consider the SCAME BRAZING LINE 50-20-350-GI-DR machine we have for sale. Contact us for further details.

Sealpac 350 Traysealer, -

formatkreissägen mit schwenkbarem sägeblatt SICAR 350 Neue Maschine Bereit zur Auslieferung SUPER RABATTPREISE mit Vorritzaggregat : Ja digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz CE-Vorschriften: JA mit Bedienungsanleitung und CE-Erklärung Volt. 380/50 Auf-/Ab- und 45°-Neigung der Sägeblätter manuell digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz schlitten mm. 3200 unabhängige Motoren hauptmotorleistung PS 7.5 motorleistung Vorritzaggregat PS 1 max. Sägeblattdurchmesser mm. 350 durchmesser Vorritzaggregat mm.120 Max. Schnitthöhe bei 45° mm. 92 Max. Schnitthöhe bei 90° mm. 120 Max. Schnittbreite an Parallelführung mm.1250 volt. 380/50

: rechts Ausklink / links S fence: elektronisch ja /nein foot pedal: mechanisch weight of the machine ca.: 1,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price

Clamping Force: 350 ton // Shot Weight (Max): 694 g

Riveting machine (1 head), Make Hang, Model 84 HS 350, Year 1992, Distance till frame 300 I5542423 mm, Rivet I5542423 transport Automatic rivet transport, Distance till frame: 300 mm, Rivet transport: Automatic rivet transport

Offer 25348 Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of the top plate approx. 80 mm - 8 T-slots in table surface length 5500 mm - Center distance of the T-slots in the table surface 255 mm each - Center distance of the T-slots from outer edge 110 mm - T - groove width approx. 40 / 60 mm - T - groove depth approx. 62 mm - Required space L 5600 x D 2020 x H 350 mm - Weight approx. 10200 kg

General SKU218W173 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity36 KW Temp.380 °C Specified Features - Temperature control unit Thermal oil heatercheck Electric heatingcheck Heating medium:Therminol 72 Heating capacity36 kW Electric capacity42,5 kW Temperature+20°C/+380°C Tank capacity60 Ltr. With pumpcheck Capacity8m³/h Motor5,5kW 400Volt With temperature controllercheck MaterialMild steel General TypeITH 350 EX Mach.No.LSI 51392 Year of construction2008 Floorspace1,85x0,98 m Total height2,0 m Weight1240 kg ATEX designedcheckConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersTemperature control unitsCatalysts & fillersFeed additivesPaper & otherSolventsDetergen ...

Key data: 350 mm, 45 °

For sale is a professional metal cold circular saw / Miter Saw from the quality brand Pedrazzoli (type Super Brown 350/60 SA, built in 1999). Perfect for locksmithing, steel construction or tube processing. Technical data (according to nameplate & model): Manufacturer: Pedrazzoli IBP SpA (Italy) Model: SB 350/60 SA (Semi-Automatica) Year of Make: 1999 Saw blade diameter: max. 350 mm Mitre cuts: Swivelling saw head for angle cuts Equipment: Pneumatically controlled vice, pneumatic lowering cylinder for saw head, separate control panel with emergency stop & timer module as well as integrated coolant device / maintenance unit. Condition & Note: Solid base with base and drip tray. Normal signs of wear and aging from workshop use. Cabling/hoses should be professionally inspected/sorted before commissioning.

General SKU354T960 MakeClima Temperatur Systeme TypeC+10/350/S No.007147 Year of construction2001 LocationBarneveld Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate box:Temperature Test Chambers: Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel General Floorspace0,85x1,7 m Total height1,9 m Weight400 kg CEcheck Extra information Temp. bereik: 10-90 °C Vochtigheidsbereik: 10-95%rF Dauwpunt vereist 1: 5-89 °C Dauwpunt vereist 2: -19-5 °C Consumer wastePaints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemical ...

Key data: 350 mm

Device details: Manufacturer: MEP S.p.A. (Pergola, Italy) Model: TIGER 350 SX Year of manufacture: 2002 (according to nameplate) Serial Number: 135609/27N Motor: 2-stage motor with 1.84 kW / 2.6 kW (1425–1710 rpm) Sales label: Lackner & Urnitsch (precision machines and tools, Graz / Wr. Neudorf) Specifications & Features: Saw blade diameter: 350 mm Cutting range: Suitable for miter cuts (swivel head) and cutting solid material, tubes and profiles made of steel or non-ferrous metals. How it works: Semi-automatic (pneumatic workpiece clamping and pneumatic/hydraulically controlled saw feed via the vertical cylinder). Control: Integrated control unit HEAD POSITIONING SYSTEM from MEP Electronic with emergency stop, operating mode selector switch, stroke limitation and speed levels.

General SKULT009 MakePharmatec GmbH TypeFluent Tank LocationGermany CEcheck Specified Features - Bioreactor Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume350 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Bioreactor Capacity350 Ltr (460 Ltr) Vessel sizesdia.791 x696mm Dished topcheck Dished bottomcheck With covercheck OutletG1: Max. temperature-10/95°C. With propellor stirrer:Magnetic ZETA, Type BMRT 125 PI Ex S Dk Y: Motor0,18kW, 230/400V, 2825rpm (EX) With variable speed drivecheck Speed mixing shaft75-540 rpm Bioreactors MaterialStainless steel 1.4404 (316L) General No.12563 Year of construction2021 Mounted on legs:platform: With switchcheck With switchgear(as is) Total height+/- 1,7 m Extra information The tank is equipped with pressure gauge, temperature sens ...

Cutting capacity at 60° right round/square/rectangular: 160mm/150mm/150mm×270mm, max. miter range left/right: 60°, saw blade dimensions X/Y/Z: 4250mm/34mm/1.1mm, max. blade speed: 100m/min, max. vise opening: 450mm, saw blade motor: 2.2kW, working height: 845mm. Machine dimensions X/Y/Z: approx. 1400mm/2000mm/2180mm, weight: approx. 990kg. Including micro-spray system and roller conveyor. Documentation available. An on-site inspection is possible.

KITTNER Lift-tilt device, type KHV-350/30L, for lifting and emptying 200 litre and 300 litre standard loading trolleys. Technical data: Tipping height: adjustable from 3,050 mm to 3,550 mm in 100 mm increments. Lifting weight: max. 300 kg Motor power : 0.75 KW Mains connection: 400V - 50 Hz Lifting principle: by means of roller chain Lifting speed: 5 m/min. Column height: 4,420 mm Total height: 4,480 mm, incl. 200 l trolley in tilted position! Degree of protection: IP 65 Execution: Lifting/tilting device in left-hand version, which means: The loading trolley is retracted into the lifting fork to the left of the mast at right angles to the slider axle! The mast, lifting fork and the fairing of the machine are completely made of stainless steel, material no. 1.4301, surfaces ground. The "slider" and the "slider axle" to accommodate the lifting fork are not m ...

Coolant cleaning system Manufacturer: Cyclomat Type: CCNR 14/350 Year of Make: 2016 For cleaning the abrasive emulsion Supply with max. approx. 250 L/min. at approx. 3.5 bar water Lifting into the filter system is done on site, Air- and foam-free. Max. temperature: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to turbidity tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Separation grain limit: approx. 5 μm Medium: Emulsion 3-6 % Operating Temperature: Ambient Temperature Solid particles: approx. 5.14 m3 Max. operating volume: approx. 4.58 m3 Min. operating volume: approx. 3.60 m3 Procedure: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with a solid consistency The dirty liquid is supplied via on-site lifting sta ...

Pressure: 13 bar Motor: 7,5 kW Voltage: 400 Volt / 50 Hz Free air delivery: 0,87 m³/min Measurement (WxHxD): 1835 x 1645 x 955 Weight: 425 kg Compressed air connection: 1/2

Pressure: 10 bar Motor: 7,5 kW Free air delivery: 1,03 m³/min Measurement (WxHxD): 1815 x 1365 x 720 Weight: 260 kg Compressed air connection: 1

Pressure: 10 bar Motor: 4,4 kW Free air delivery: 0,52 m³/min Measurement (WxHxD): 1895 x 1280 x 720 Weight: 290 kg Compressed air connection: 1/2

Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2

Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2

General SKU397X1104 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Steam Capacity25 KW Temp.70 °C Specified Features - Temperature control unit Temperating machinecheck Heating medium:Water / Glycol 80:20 Heating capacity25 kW Electric capacity51 kW, 400 volt With coolingcheck Capacity15 kW at 0 °C Temperature0/70 °C Tank capacity30 Ltr. With pumpcheck Capacity6 m³/h Motor3 kW With temperature controller(PID controller SR 500 - as is) MaterialCopper General TypeSUK 350 W Mach.No.HSK07001 Year of construction2007 Mounted on framecheck Floorspace1,2 x 1,9 m Total height2,24 m Weight1100 kg Extra information Connections (outflow/return): DN 32Compressor: Hermetic piston compressor Delivering pump: 6 m³/h Pump motor: 3 kW Filling volume (heat carrier circuit): approx. 30 L Refrigerant: R 404A Refriger ...

Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2

This 4-axis DMG MORI CLX 350 lathe was manufactured in 2018. It features a maximum workpiece diameter of 320 mm and a maximum machining length of 530 mm. The machine is equipped with a Siemens SLIM Line CNC and offers an X-axis travel of 242 mm, Y-axis travel of +/- 40 mm, and Z-axis travel of 540 mm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 350 lathe we have for sale. Contact us for further details.

Technical data: Condition: New device Working pressure: adjustable from 170 to 350 bar Flow rate: 17–21 l/min Pump: Ceramic Triplex Plunger Pump Pump speed: max. 1,450 rpm Hydraulic power: 14 kW / 19 hp Engine: Honda 2-cylinder 4-stroke petrol engine Engine power: 16.4 kW / 22 hp Motor speed: max. 3,150 rpm Electric starter with engine oil pressure monitoring Fuel consumption: approx. 5.5 l/h Tank capacity: approx. 20 litres Water connection: GEKA High pressure connection: M22 × 1.5 Maximum water temperature: 40 °C Required water inlet pressure: 1.8–6 bar Dimensions: 79 × 79 × 99 cm Weight: 130 kg Chassis: Two-wheeler trolley with pneumatic tyres Item number: 1487050 Standard equipment includes a 10 m high-pressure hose, a high-pressure gun with an approx. 800 mm long spray lance, nozzle holder, 15° flat spray nozzle, pressure gauge, infinitely adjustab ...

General SKU397X1129 LocationBarneveld CEcheck MakeLauda Pressure Working pressure4 Bar Main Features Heating (medium)Electric Capacity44 KW Temp.80 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:Water/Glycol (1:1) Heating capacity1 m³/h Electric capacity44 kW, 400 volt With cooling(Water) Capacity12 kW at +10 °C Temperature0/80 °C Tank capacity60 Ltr. With pumpcheck Capacity3 m³/h Motorcheck With temperature controller(PID controller - as is) MaterialCopper General TypeSUK 350 W Mach.No.B14 730 Year of construction2003 Mounted on framecheck With switchgearcheck Floorspace1,14 x 1,5 m Total height2 m Weight950 kg Extra information Connections (outflow/return): Flanges DN50: PN16: DIN 2633Compressor: Semi-hermetic reciprocating compressor Delivering pump: Grundfos CR 5-6 (6 m³/h) Refrige ...

Offer 23330 Specifications: - Semi-automatic sawing machine with hydropneumatic - Saw blade feed - vise - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed infinitely adjustable - Pneum . Material vise - E. footswitch - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 1.8 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

GAS TURBINE CENTRAX PACKAGE OR ONLY CORE YEAR 1990 HOURS 40 000 PRICE LOADED IN FRANCE

Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2006. This Arburg Allrounder 630S-2500-800/350 features a clamping force of 2,500 kN and a maximum mold height of 900 mm. It includes a screw diameter of 45/35 mm and a maximum injection volume of 195/140 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 630S-2500-800/350 machine we have for sale. Contact us for further details.

Control: Cybelec DNC 600S. Inspection by appointment possible.

Offer 25433 Specifications: - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed by hand - Material vise - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 40413 Hour(s), Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 280 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 350 , Generator Hz: 50 , Generator Volts: 415/240 , Generator Amps: 487 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/perkins-2306c-e14-tag2-generat or-350-kva-used/689, , = More information =, , Empty weight: 2.495 kg, Type number: 2306C-E14 TAG2 GENERATOR 350 KVA

Key data: 350 mm

SPECIFICATIONS: Saw blade: Ø 350 mm Installed power: 2.8 kW Voltage: 380 V Complete with table and extraction system

- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) Specifications: Blank diameter (max.): 700 mm Tip width : 825 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Transverse speed: (max.) 6.0 m/min Longitudinal speed: (max.) 6.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-2,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 3,500 kg

A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible.

Two identical Brabender belt weighers are available. Belt width: 350mm, max. throughput: 1800kg/h, inlet diameter: 200mm, outlet diameter: 250mm, load cell nominal load: 5kg, accuracy: +/-1%, max. belt speed: 27m/min, max. bulk good density: 1.5kg/dm³. Machine dimensions X/Y/Z: approx. 1500mm/700mm/700mm, weight: approx. 180kg. Documentation available. On-site viewing possible.