rt 350 used for sale

FAS roller conveyors 9000-410-350 RA2404 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3x3000 mm = 9000 mm Roller width (RB): 350 mm Nominal/outer width (NB): 410 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: good (used) Conveying length in mm: 9000 Nominal / outside width in mm: 410 Roll width in mm: 350 Roll division in mm: 62,5, 130 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with t ...

Vacuum tumbler 350 liters Lutetia Capacity: 150kg Volume: 350 liters Dimensions: 1450 x 880 x 1430mm Weight: 200kg Capacity: 350 liters Voltage: 400V / 50Hz / 3NPE

Cast iron bed 2600 x 2000 x 350 mm - No 1 Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

engine output: 5 kW saw-blade dia.: 300-350 mm Working speed: 0-40 m/min weight: ca. 1.300 – 1.800 kg kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheeter for foil / sleeve Manufacturer: Sandmann Working range width = 16 -350 mm, Length = 10 -1000 mm, Speed up to 50 m/min 

Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe type MV SKV/2-1 -Max. passage: Ø 350 mm -Peak height: 460 mm -Technical drawing: see photos -Dimensions: 820/270/H895 mm -Weight: 160 kg

A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: PSG, heating tape, heating sleeve -Type: 50Ø38 C -Heating power: 350 W -Voltage: 230 V -Dimensions: 200/130/H40 mm -Weight: 0.2 kg

METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...

Pipe grab, round grab, laying clamp, round material grab, scissor grab -Pipe grabber: unfortunately without type designation -Pipe diameter: approx. 350 to 800 mm -Grip diameter: 2 adjustable ranges, see photos -Dimensions: 750/500/H1120 mm -Weight: 126 kg

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Hydro-pneumatic control of the saw head · Pneumatic double clamping device · Pneumatic vertical clamping device · Electro-pneumatic material feed unit with material hold-down device · Vernier for length adjustment · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Leftover piece length in automatic mode 210 mm MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting ...

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Dolezych, round material gripper type RZ SCH -Gripping width: 100 to 350 mm -Load capacity: 1000 kg -Dimension: 825/390/H550 mm -Own weight: 36 kg

Crane block, deflection pulley, cable pulley, steel cable pulley, cable deflection pulley, crane, block and tackle -Crane block: with guide rails -Rollers: Ø 350 mm / 4 grooves -Number: 8x pulley available -Price/delivery: per piece -Transport dimensions: 650/330/H350 mm -Weight: 50 kg/pc.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,22 t dimensions: 0,7 x 0,9 x 1,9 m ATTENTION: SPECIAL PRICE! - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Pneumatic double quick clamping device Vices close when lowering - Ball bearing table - Machine base - Powerful and powerful - High-quality workmanship The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 945 x 605 x 605 mm operating pressure: 2,2 - 5,5 bar dimensions: 1,0 x 0,61 x 1,65 m : 1300 x 1000 x 750 cm Air consumption: 250 l/min. weight of the machine ca.: 0,09 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs., Accessories: Optical linear scale with digital display counter (0,001 mm) X, Z Axes 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120 factor zoom included), High performance swivelling angle reader (0,05°) Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm Stepless oscillation speed, Automatic central lubrication Manual dressing device for silicium wheel Spindel-motor power max. 3 PS (2,25 kW) Dressing-spindle motor power 2 PS (1,5 kW) Plexiglass splashguard Extractor Optional available: Telecentric zoom system & DXF file convert & graphic include : - PC - Screen : upgrde to 22 - Backlight : upgrade to vertica ...

T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Willmann, hydraulic cylinder type 50/35x350 -Stroke: 350 mm -Piston rod: Ø 35 mm -Hole diameter: 120 x 10 mm -Dimensions: Ø 145 x 545 mm -Weight: 11.1 kg

Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm -Weight: 19 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: EDN, saw blade HW 12 / 1459 -Type: NE3 350x3.2x32Z=108neg -Speed: n max. 5000 rpm -Use: non-ferrous profiles/plastics -Quantity: 2x saw blade available -Price: per piece -Dimensions box: 385/385/H10 mm -Weight: 1,9 kg

Thermal system, fan heater, heating elements -Manufacturer: Ziehl-Abegg, axial fan, axial fan, heating fan -Axial fan: type DADL 350/6 -Power: kW -Dimensions: Ø 470 x 245 mm -Weight: 9.1 kg

continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Container turning device, welding turning device, roller stand -Roller stand: wheels Ø 125 x 35 mm -Roller spacing: 140 mm -Quantity: 1 piece available -Dimensions: 350/80/H170 mm -Weight: 6.6 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear -Transport roller: Transport chassis -Load capacity: t -Dimensions: 350/250/H145 mm -Weight: 17.3 kg

Metal Detector for food and other (e.g. medical, chemical, textile) products, stainless steel framework, touch screen, self-learning system. - Specifications: weight of the product: max. 5kg | detecting speed: 0.2-0.8m/sec | detecting accuracy: FE from ? 1.0mm, SUS from ? 2.2mm | tunnel size WxH: 350x175mm | max. passing size WxH: 300x135mm | power: 220V/0.3kW, 50Hz/60Hz, dimensions and weight: L1545xW1114xH1383mm, 150/250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Key data: 3500 , 70

SANDRETTO 350 T serie 7 Reference: serie 7 1960/350 Condition: good Technical Specifications: Clamping force: 350 T / 3500 KN Tie bar spacing: 600 x 600 mm Platen dimensions: 910 x 910 mm Mold thickness (Min/Max): 200-650 mm Opening stroke: 600 mm Injection volume: 1347 cm³ Injection pressure: 1450 bar Screw diameter: 70 mm L/D ratio: 20 Additional Features: Mounted mixer screw on the machine + standard screw + monobloc screw Dimensions: Weight: 14 500 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 350 mm -Material: Steel -Dimensions: see photo -Dimensions: 350/250/H200 mm -Weight: 62.3 kg/pc.

Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm Control: total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom Roller conveyors optional Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the us ...

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, stroke 12 mm -Punch dimensions: 1x Ø7 mm / 1x radius 13 mm, see photos with dimensions -Dimensions: 535/350/H267 mm -Weight: 142 kg

NH fuse switch disconnector -630 A 660 V AC -Dimensions: 100/670/H280 mm -Weight: 8 kg

Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 510 mm -Length: 350 mm -Height: 60 mm -Dimensions: 510/500/H190 mm -Weight: 120 kg

A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible.

Stock# U2461 Used stainless steel planetary mixer by Grieser (DE) model VPL 350. Mixer has two spiral agitators and one side wall scrapper. Agitators are belt driven by el motor 15 kW, 1460 rpm, 400 V, 50 Hz and planetary gearbox. Rising and lowering of agitators by hydraulic device. Mixer is equipped with 9 mobile stainless steel mixing pans. Each pan has internal diameter 695 mm x 500 mm depth, total volume 365 l, working about 350 l. Two mixing pans have bottom outlets with manually operated valves. There is also included mechanical rising and tilting device for discharging pans. Mixer has local control panel and el. cabinet. Technical documentation - general manual and el. schemes available in digital form. Machine currently dismantled. Last time used in food production.

We offer Doka Eurex 30 top 350 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 350, used - 52,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The extra-durable ceiling support with impact protector The robust and durable Eurex 30 top slab prop impresses with a high minimum load capacity of 30 kN and complies with column class C/E according to the EN 1065 standard. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Beck ...

power capacity: 4 kW feed pressure: 10 bar liter capacity: 490 Lieter / min Receiver capacity: 350 l motor speed: 1500 U/min voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 0,8 x 1,5 m • 2 piston-compressor with tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt width 350 mm Number of straightening rollers - 11 pcs Diameter 60 mm Capacity 350 x 2.5 mm Motor 4 kW Speed adjustable by variator drive

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

Mitre cold circular saw BERG & SCHMID type MKS 350Year of construction approx. 1980Saw range at 90 Around 110 mmSaw area at 90 Rectangle 160 x 90 mmSaw area at 90 Square 95 x 95 mmSaw area at 45 Round 95 mmSaw area at 45 Rectangle 120 x 90 mmSaw area at 45 Square 80 x 80 mmSaw blade diameter max. 350 mmSaw blade speed 28 and 56 rpm. Motor power approx. 1.8 / 2.5 kW pole-switchableMains connection 380 volts, 50 Hz- motor with 2 electrically switchable speeds- infinitely variable

Máquina serigráfica con 1 cabezal Área máx. impresión: 340 x 380 mm Ancho máx. de banda: 350 mm Diámetro máx. de bobina: 700 mm Registro por marca Desbobinador y rebobinador independiente Secado UV

Inv. Num. : 8618 Type: FTC 350 XLS Producer: FEELER Created: 2014 Parameters: Control System: FANUC Series Oi-TD Switch-on hours: 9330 h Hours: 7081 h Maximum turning length: 870 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 630 mm Number of Spindles: 2 pieces Maximum spindle speed: 4500 1/min Equipment: Chuck

ENGEL ES 1350/350 HL injection moulding machine was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameters. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system, operating at a maximum force of 350 tonnes, guarantees high repeatability and quality of the manufactured parts. Once the production process is complete, the robot automatically transfers the finished products from the workspace to a conveyor belt. The ES 1350/350 HL injection moulding machine weighs 5000 kg. Technical specifications of the ENGEL ES 1350/350 HL injection moulding machine - CNC controller: ENGEL - maximum m ...