rt 350 used for sale

The scope of delivery includes: 01x Shelf connector, used Mounting type: on the side of the shelf stand Surface: sendz. galvanized Total length: 450 mm for shelf spacing: approx. 350 mm Profile abm.: U 62 x 30 mm Weight: 0,84 kg | Pcs.

Machine No.: 140374 Country of origin: Italy Saw blade Ø mm: up to 350 Feed speed: infinitely variable Cutting areas: see photo of the machine shield Dimensions LxWxH mm: 900x650x1650 Weight approx. kg: 750

Broken ice machine Manufacturer: ZIEGRA Ice Maker Type: ZBE 350 EV Specifications: 400V / 50Hz / 6A Year of manufacture: 2012 (many new parts in 2024!) Total dimensions: H157 x W70 x D85 cm Refrigerant: R 449A Ice machine for connection to a CO2 refrigeration system or individual unit Machine design Completely stainless steel Surface ground Output approx. 350 kg / 24 hours at 20°C air & 15°C water Compact design Designed for continuous operation - 24 hours - 7 days a week Stock machine, immediately available! Function checked / machine ready for immediate use! Condition and accessories see original pictures! If you have any questions, email or call.

Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC13-71A(02-01) - Stage 3A Engine No.: 7395788 Power: 315 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator type: ECO 38.2 L 4 C Gene. No.: P242434 Generator power: 350 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 740 Dimensions of the power unit: Width approx. mm: 1.800 Height approx. mm: 2.340 ...

Riveting machine (1 head) Make Hang Model 84 HS 350 Year 1992 Distance till frame 300 mm Rivet transport Automatic rivet transport

Brand Allibert Year of manufacture: Used Dimensions LxWxH (mm) Outside: 400 x 300 x 350 (320) / Inside: 350 x 250 x 310 Weight (Kg) ca 1,70 each Number of pieces in stock 1232 Made in Belgium Comments PP PVC box incl. covers ( small amount little damages)

capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 350 mm dimensions of saw-band: 4640x34,1,1 mm : 355 mm sawband speed: 15-115 m/min weight of the machine ca.: 2800 kg dimensions of the machine ca.: 3050x2190x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Euro supports eco 350 - new Steel prop, galvanized • Effortless loosening of the adjustment nut due to special thread geometry • Less effort due to low weight, 17.60kg • Reliable to use due to consistently high load capacity of at least 20kN according to EN 1065 • Easy height adjustment through hole numbering Europrop eco 350, new construction prop made of steel, galvanized - effortless loosening of the adjusting nut due to special thread geometry - less effort required due to low weight, 17.60kg - safe to use thanks to consistently high load-bearing capacity of at least 20kNto EN 1065 - - easy height adjustment thanks to hole numbering

Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General Information SKU: 186 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Injection weight: 210 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Tie bar spacing: 420 x 420 mm Clamping plate size: 605 x 605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 m Funnel: No Core train: Yes Euromap: Yes

SMAG C4R 350 June 1999 Spare parts supplied with the machine: 25 new and used air pressure connectors 5 new control buttons 1 box of 12 used relays 1 box of 12 new relays 4 new aluminum sensor holders plus 7 used ones 6 complete used Keyence for cell adjustment 2 new Keyence cell adjustment 11 bags of screws for adjustments and new cell 1 new INA mandrel holder bearing 4 new mandrel bearing holders 9 boxes of new cell wire 2 used wires 10 different new spare control buttons 7 new J559 belts 5 J864 belts 1 used inverter to be repaired 1 used brake system 1 used joystick Machine equipment: 12 slitting knives 9 slitting blade holders Winding shaft: Ø38-Ø40 -Ø76 Maximum mother reel diameter 650mm Maximum diameter of daughter coil: 350mm

Heating power: 185 kW Heating water inlet temperature: 55 C Heating water outlet temperature: 60 C Heating water volume: 32 m3/h Refrigerant: R 134a Starting current: 147 A Capacity: 2x 25 kg Operating voltage: 400 V Control voltage: 230 volts Operating pressure: 28 bar Displacement: 101 m3/h Power consumption: 43 kW Subject to prior sale - errors possible Ref. No.: E-1165

Dimensions (L/W/H): 3500x1500x1650 mm Weight: 2500 kg Total power requirement: 45,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heating system Fabr. Endress Type USF-W 350 Power: 350 Kw Bj.2010 with loading with ash discharge with control with bunker discharge Fabr. Nolting Type BAS 250 Year: 1985 with briquetting press Fabr Reimann Type 450/30 built in 1985

Elevator Belt Bandwidth: 31 cm Width: 62 cm Length: 194 cm Height: 122 cm Height Difference: 90 cm Variable Adjustable Speed Stainless Steel

On offer is a used Delta LF 350 vertical cup grinder The machine is in a well-maintained and functional condition. It is ideal for precise surface and cup grinding of metal parts – perfect for workshops, maintenance or toolmaking. ⸻ Technical data (approx. information): • Model: Delta LF 350 • Type: Vertical cup grinder • Grinding range: approx. 350 × 155 mm • Grinding height: approx. 280 mm • Grinding wheel Ø: up to 200 mm • Spindle speed: approx. 2,800 rpm • Drive power: 3 kW • Connection: 400 V / 50 Hz • Weight: approx. 450 kg ⸻ Equipment: • Magnetic clamping plate • Coolant device / wet grinding device • Splash cover • Manual delivery • Grinding wheel & tools included • Documentation / instructions available ⸻ Condition: • Technically flawless, ready for immediate use • Visually well-maintained, normal  ...

Submersible pump, TA160/350-G+131, Brinkmann Pumps, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has some storage marks due to the long storage period, Technical data: - 220L/min, 2m, - 240/400V 0,5KW, - Immersion depth 350mm, - Flange outer diameter 180mm, - Pitch circle diameter 160mm z=4, - 58x22x18cm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages.  ...

Ref. -No.: 10301 Manufacturer: TITAN Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Technical data of the pallet rack crossbeam: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbeam, used Material color: orange Box profile: 80 x 50 mm Truss Type: PNBH 0488 Agraffe: 4 HK (hook) Weight / piece: approx. 5.38 kg Clear width: approx. 1,350 mm 02x Locking pins, used Execution: complete galvanized To secure the longitudinal members against unintentional lifting Note: - The trusses can also be used in drive-in racking systems. - It is also possible to use the trusses as bracing. General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery.

Key data: 3500 mm, 810 , 60

Screw diameter: 60 mm Injection weight in polystyrene: 810 g Clamping force: 3500 kN Screw diameter: 60 mm Stroke volume: 891 cm³ Injection weight in polystyrene: 810 g/hp Injection pressure: 2,420 bar Clamping force: 350 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 350 mm Opening distance: 730 mm Microprocessor control: NC5 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 55 kW Total connected load: 78.1 kW Total weight: 17,300 kg Total size: 7.4 x 2.0 x 2.4 m Payment terms: 100 % before taking over the machine, net only

Machine No.: 92380 Weight: 210kg Year of construction: 04/2011

We offer Doka Eurex 20- 350 WB Supports cleaned and checked. Original Doka rental storage quality. The support corresponds to the Doka Eurex Eco series. Doka Eurex 20-350 WB. 39,50€/ Piece Doka stacking pallet 1.55m x 0.85m = 120€/ piece Column class B/D according to standard EN 1065 General technical approval Z-8.311-942 High load capacity of up to 36.7 kN depending on extension length, minimum load capacity of 20 kN for each extension length Numbered and embossed stake-out holes and ergonomic stake-out bracket for easy and quick height adjustment Fast and safe loosening of the forged adjustment nut even under load thanks to special thread geometry Crush protection (10 cm free space when the support is inserted) and fail-safe (protection against falling out of the inner tube) for safe work Long service life due to high-quality zinc plating Quick connection for ten ...

; Gross weight [kg]: 3700; Engine: Volvo TAD1343GE; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 576

Flail mower rear attachment cat. I and II, for PTO drive 540 rpm, consisting of 2 x 125 cm flail mower, foldable left and right, mowing width approx. 350 cm in connection with front mower (not included!), otherwise approx. 100 cm remain unprocessed in the middle. Little-used machine from public Hand, built in 2009. Various front mowers and other mowing technology in stock - ask us! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

Qty. 1 Second-hand paper coating machine Mfc.: SBL Model: HCUV-350 automatic coating machine Built: 2003 Max. sheet size: 1060 x 740 mm. Min sheet size: 450 x 360 mm. Max. coating area: 1050 x 730 mm Spot coating Speed: 7200 sh/h Automatic feeder with vacuum IR dryer for better varnish heating UV dryer with 3 lamps and cooling system delivery stacker

Pressure: 10 bar Motor: 4,4 kW Free air delivery: 0,52 m³/min Measurement (WxHxD): 1895 x 1280 x 720 Weight: 290 kg Compressed air connection: 1/2

Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2

Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2

Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2

Load stand, swivel stand, lifting stand, shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread -Quantity: 7 pieces -Height: 220 mm -Base plate: 450 x 350 x 20 mm -Shackle plate: 146 x 146 mm, M42, 4 pieces with shackle -Price: complete -Dimensions: 450/350/H220 mm -Weight: 42 kg/unit

Key data: 500 mm, 400 mm

Type: Die-sinking EDM machine Ident Number: 22409 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 350 GammaTec Year of construction: 2006 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece weight: 500 kg Electrode changer: 16-fold C-axis

clamping force: 1300 kN injection volume: -- cm³ screw diameter: 45 mm platen size: 470 x 470 mm Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical pr ...

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

Screw diameter; 55-35 mm Injectable volume: 558 - 139 cm3 Injection pressure: 2380-2500 bar Column width: 630 x 630 mm Mould thickness min: 300 mm max: 600 mm Aperture stroke: 600 mm Cores: 2 Robot Interface: Yes Options: Rotating base: Arburg 243849 year: 2012

Key data: 1300 , 40

Screw diameter: 40 mm Injectable volume: 182 mm Injection pressure: 2120 mm Passage between columns: 420 x 420 mm Opening stroke: 500 mm Core: 1 Blower: Robot Interface

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Rezess: Ø 80 mm -Hole circle: Ø 127 mm -Through hole: Ø 40 mm -Weight: 40 kg

Ransomes - Parts // also Agria Iseki Jacobsen SABO Shibaura Toro Used parts and components available from stock for: 213 D, 350 D, Commander 3510, Fairway 405, MK IV, MK 11, Rider J74: mowing spindles, hydraulic components, engines, axles, wheel drives, hydrostats, hydraulic pumps, wheels and tires, steering parts, steering orbit rollers, etc. Other miscellaneous parts of Agria 9300, Jacobsen HR5111; 1471, Gutbrod 2850DA, Iseki div., Hako 1800-2750, John-Deere div., Sabo 1203; 1500; 1502D; RS84 Senior, Shibaura SP1840; CM364, Toro Pro81 etc. ... Complete spindle units and 3-fold cylinder mowers Bucher, Loipfinger, Jacobsen as well as Ransomes and SABO Info and offers on request. No sending of package deals or lists.

Paper format: min. 10 x 16 cm // max. 35 x 50 cm Brochure format: min. 8 x 5 cm // max. 35 x 25 cm Equipment / Additional information: Page circumference 80 gr./m2 up to 100 pages Work cycles max. 4000 per hour 4xHohner 48/5 stitching heads Easy adjustment option for head stitching Break-in sword fold with adjustable folding rollers Front cutting unit via upper and lower knives

Listing ID: 22624 Brand: ZF 350 Model: 350 Power: 324 kW(435hp) 1800 rpm (CD) Ratio: 2,077:1 SN 20030818 Features: SAE Housing, Controls Mechanical ,Hydraulics ,Oil Filter HS Code: 84836080

Key data: 350 mm, 500 mm, 450 mm

CNC-controlled precision vertical slotting machine with four CNC axes and an electronic control of the rotary cutting table with a positioning accuracy of 0.001°. A machine for the efficient production of: - Fitting grooves (also conical grooves) -Splines - Internal and external gears -Racks CNC control with 10" color screen and touch screen software for roughing – finishing – fine finishing (This achieves surfaces of the highest possible grades.) Lifting range of the push carriage can be programmed up to 350 mm Push-slide speeds 0 to 80 strokes/min infinitely variable Push-slide swivel range +/- 20° Largest workpiece height 640 mm Projection 500 mm Round table size 450 mm Bore in the round cutting table Ø 135 mm Maximum table load 1,250 kg Table travels longitudinal and transverse – 340 x 340 mm Power transmission of the X + Y axis by precision ball screw ...

Tray sealer Sealpac 350 with 4 different tools, vacuum pump, water chiller, Year of construction 2002, connection 400V, 3kW, total length approx. 3.50m used, functional, as returned by the customer

Key data: 600 mm, 770 mm, 805 mm

Siemens Sinumerik 840D sl 2 pallets, 2-fold pallet changer Pallet size: 400 x 400 mm Travel: X: 600 mm Y: 770 mm Z: 805 mm Swivel table A-axis Rotary table with pallet clamping system coarse (B-axis, PW) Milling spindle HSK-A63 Milling spindle drive power: 32/25Kw Max. torque: 206 Nm Max. spindle speed: 16,000 rpm Grob Spindle Diagnosis GSD Tool magazine with 90 tool positions Tool cleaning device Tool length measurement Renishaw Workpiece Measurement, RMP60 Machine condition light Pallet set-up station, can be rotated by hand Set-up door, additional control panel Preparation of hydraulic workpiece clamping system Swivel Axis Calibration GSC Energy Efficiency Package EED Hand-operated handset HAT 8 Sinumerik MDynamics technology package – milling Coolant Package Premium - Scraper belt chip conveyor, discharge height 1,100 mm - Filter system -Tank - High-pr ...

Key data: 420 mm, 1233 mm, 3300 1/min

Mazatrol SMART Control Max. rotary diameter: 420 mm Max. turning length: 1,233 mm Travel X/Z: 240/1,350 mm Spindle motor 30 kW Max. spindle speed: 3,300 rpm Max. bar passage: 102 mm 12-speed revolver Driven tools AC 7.5 kW Max. speed: 4,000 rpm 3-jaw chuck Kitagawa BR12 Bezel SMW Autoblok type K3-FSW, clamping range 65 – 235 mm Djgned 15 bar high pressure pump