rt 350 used for sale

NEW electronics 230V - TB09050-1 - from spare parts warehouse

Key data: 1600 mm, 3500 mm, 800 mm

For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...

Stainless steel tank 3500 litres with SCABA agitator and measuring technology Manufacturer: SCABA Tank Type: Stainless Steel Tank with Agitator Volume: 3500 l Year of Make: 1997 Quantity available: 2 pieces Agitator: SCABA Motor power: 0.37 kW Degree of protection: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Metrology: Endress+Hauser Liquiphant Power supply: 10-55 V DC Equipment and accessories Agitator completely assembled Internal mixing system with stirring blade Manhole with lid Filling opening with grid insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated in the base frame Outlet at the bottom with connection

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

LISTING ID 22696 BRAND: CATERPILLAR MODEL: 3508 B POWER: 746 kW 1600 RPM COMPLETE WITH PANELS AND ACCESSORIES

0: ja Working width: 3000 (3500) mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes 4.0 x 450 -Type: 35056 -Weight per package: 5.6 kg

Key data: 408 KW

2 x Caterpillar 3508 Natural Gas Generating Sets 1 of the generating sets has had a top end service. Make and model: Caterpillar 3508 Capacity: 408kW Hours: 46,600 Year: 1994 Fuel: Natural Gas Hz: 50 V: 400 Scope of supply: Engine, Alternator, Control Panel (ComAp), Radiator. Price: €50,000 each Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.

Caterpillar 3508 ? Rebuild ? 783Kw ? S2E

Panel length: 3,500 mm Panel width: 1,300 mm Workpiece thickness min: 11 mm Workpiece thickness max: 60 mm Crkikw9B Input length min: 300 mm Cycle time: 200 s Capacity m2/ 8h: 720 High Frequency Press: Yes Power HF generator: 30 kW Gluing unit: Yes Joint gluing press: Yes

Kannegiesser belt conveyor belt conveyor GF 3500-680-600 RA2323 Technical data: Conveyor length (NL): 3500 mm stand width (NB): approx. 680 mm belt width (GuB): 600 mm Overall height(BH): 110 mm Conveyor speed (v m/s): 0,9 @ 50Hz, adjustable up and down with frequency converter Drive: Bauer gear motor Electrical data: 400 V / 50 Hz / 0.37 kW deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-ply PVC belt, grey, smooth Year of manufacture: 01/2018 Optionally available: Suppors Side guides one and both sides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2018 condition: as good as new (used) Conveying length in mm: 3500 Nominal / outside width in mm: 680 Belt width in mm: 600 Driven: YES Engine type: Bauer Getriebemotor KW: 0,37/S1 Conveyor speed m / s: freely adjustable scope of delivery:  ...

Key data: 3500 , 1212 , 70

Screw diameter; 70 mm Injectable volume / Shot volume: 1212 cm3 Injection pressure: 1877 bar Column passage / Bettween tie bar: 810 x 710 mm Mould tickness thickness: 380 mm max: 820 mm Opening stroke: 710 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options:

Honing machine, SUNNEN EC3500, (like ml3500 ml5000 ml2000), this machine is currently under complete electronic retrofit (Siemens / Telemecanique), Touch screen. Loader interface possible

x-travel: 3500 mm y-travel: 1000 mm z-travel: 1300 mm Control: Heidenhain type: TNC 155 surface area: 3700x1120 mm power capacity: 26 kW transmission ratio: 2 turning speeds: 40-2000 U/min spindle taper ISO: 50 Feed: 3000 mm/min Rapid movement: 8000 mm/min total power requirement: 40 kW weight of the machine ca.: 21 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/201, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 5.500 kg, Type number: LLE-2644644

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: SAE 00 , Flywheel SAE: Unknown , Working Hours: 28745 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/7089, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3508 S2A 232-2464; Transport weight [kg]: 4550

Screw diameter 30 mm Foundation plan / installation plan (see machine layout above in the appendix), an extra foundation for the plant was not poured here Operating hours 12455h on 28.01.2021 Automatic cycle counter 743558 processed material PBT-GF 30 Ultradur B4300 G6 Q16 black Find more here - /

A vulcanising press with 4 shelves, it was purchased as a spare for the currently used one and has been standing unused since new, in total it has worked for us 0h. Model XL8-350T-700x700x4 l´LC Pressure 350T 700x 700mm thickness 6()mm Hotplate resistance Ra:,I .6a (2.5 μm) - Type of heating electr. Max. temperature 200 ‘C Pressure on workplate approx. 7 I kg-´cm2 piston diameter I 600mm -f 500mm Hydraulic pressure 16Mpa Machine structure Ko1umno,-a Motor power .of hydtaulic station ,- 5.5kW Heating power for J..ai:d working plate 9 x 0.9kW= 8.lkW Weight p,-assembly approx. 12000 g Press dimensions : Approximately 2800x I 200,´350Chnin Find more here - / Contact us at -

: 350 mm : 4160 mm : 400 mm : 350 mm : 400x350 mm dimensions of saw-band: 4160x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4 mm, 1 mm, 770 mm

Heidenhain iTNC 530 Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Pendulum operation 2x 1,450 x 1,000 mm Mount: SK 50 Tool magazine: 30 – compartment Spindle speed: 30 - 4,500 rpm Accessories -Conveyor - Electronic handwheel - Coolant filter system -Partition - Vetter gantry crane 2 tons - Benz SK40 angle head with torque arm

Refer to code 1159 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1154 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Cefla, Type: TR 3500/A-D, Year: 2015, incl.control: yes, Length-width mm: 3500x1300, Programming possible: yes, Length mm: 3500, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

Manufacturer: Cefla UV 1 Lampe, Type: TTV 3500, Year: 2003, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 100, Working widht max mm: 1300, Number of lamps: 2, kW power 1 lamp: ca.12,5, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 120, Conveyor lenght mm: 3500, Chain pitch mm: 140, Working hight approx mm: 930, Feeding speed m/min: 10-22, Conveyor: Stange, Drive power kW: ca.0,75, Exhaust air diameter mm: 250, Year :2003

Manufacturer: Dimter , Type: Profipress 3500, Year: 2003, Continuous flow system: yes, Work piece width min-max mm: 300 - 3500, Min.-max. workpiece length in mm: 1300, Min.-max. workpiece height in mm: 11 - 60, Hydraulical/pneumatical: yes, High-frequency: yes, Warm water: yes, Thermoöl: yes, High / low pressure: yes, Cylinder vertical: yes, Cylinder horizontally: yes, Pre-assembling conveyor: yes, Glue application machine: yes, Clamping: yes, Disc saw transverse: yes, FREE TEXT: 2800 Betriebsstunden, Year :2003

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -without: rubber coating -Load capacity: kg -Tire size: 350 x 155 mm -Mounting bore: 60 mm 2x with groove -Number: 4x wheels available -Price: per piece -Weight: 31 kg/piece

Replacement blades for cutting machines, circular blades, round cutting blades, machine blades, -Blade size: 350x40x3 -Serial number: 2162928 -Material: 4112-22N Martensitic stainless steel -Number: 6x available -Price: per piece -Dimensions: 350/40/3 mm

Saw blade, wood saw blade, circular saw blade -0299-99560572 -Ø 350x10.0-11.8x60 -Z36 = T 30.53 -n max. 5500 -Price: per piece -Number: 1x available -Weight: 6 kg/piece

Saw blade, wood saw blade, circular saw blade -Ø 350x6.0/4.0x60 -Z36 = T 30.53 -n max. 5500 -0599-99561709 -Price: per piece -Number: 4x available -Weight: 6 kg/piece

Saw blade, wood saw blade, circular saw blade -Ø 350x10.0-11.8x60 -Z 36 = T 30.53 -n max. 5500 -0299-995600572 -Price: per piece -Number: 5x available -Weight: 6 kg/piece

Saw blade, wood saw blade, circular saw blade -0304-6040045 HW -Ø 350x10.0-11.8x60 -Z48/48 = T 22.90 -n max. 5500 -Price: per piece -Number: 1x available -Weight: 5.6 kg/piece

Saw blade, wood saw blade, circular saw blade -Ø 350x7.0/5.2x60 -Z48 = T 22.89 -n max. 5500 -UFN - equipped -0304-5040117x HW 2 pieces -0600-5002097x HW 3 pieces -Price: per piece -Number: 5x available -Weight: 3.8kg / piece

Saw blade, wood saw blade, circular saw blade -Ø 350x4.0/9.0/3.0x60 -Z48 = T 22.90 -n max. 5500 -0601-5011616 HW -Price: per piece -Number: 6x available -Weight: 1.6 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Rix, RIX-HSS saw blade with SK40 mount -Size: 350xx3x32mm -Number of teeth: 96 teeth -Dimension: Ø 350 x 175 mm -Weight: 4.2 kg

CNC Machining Center Hedelius BC 100 P-3500 Magnum Control: Siemens Sinumerik 840D Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm T-slots 5 pieces Distance T-slots 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Mount: DIN 69871 SK 50 Tool magazine: 50 – compartment Spindle speed: 20 - 4,500 rpm Accessories - Door automation - Handheld operator - Machine hood -Conveyor

Make: Caterpillar Model: 3508 Mfg year: 2011 Run time: 322 Hours only Containerized. Power: 925 KVA Voltage: 440 V Speed: 1800 RPM Frequency: 60 Hz In excellent condition #caterpillar #generator #power #energy #ship #vessel #marine #diesel

Mazak QTN 350M x 1200 Motorized Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mazatrol CNC Version: FUSION 640 T NEXUS Main spindle nose: ASA 8 Main spindle power: 22Kw Main spindle bar passage: 76mm Turning diameter: 420mm Turning length: 1173mm Number of main spindle speeds: 3300 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm First turret Z-axis travel: 1240mm Presetting: yes :::D DIMENSIONS AND WEIGHT::: Length: 3450mm Width: 2050mm Height: 2000mm Weight: 7500Kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: Guhdo, saw blade HM NE PRO -Type: 350x3.5/3.0 Z108 -Article No.: 2185.351.31 -Speed: n max. 5400 rpm -Use: non-ferrous profiles/plastics -Dimensions box: 385/385/H10 mm -Weight: 2.4 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade HM NE PRO -Type: Ø 350x3.5/3.0 x 32 Z92 = T 11.95 -Art. No.: 0507-1064541X HW -Speed: n max. 5400 rpm -Dimensions box: 390/390/H10 mm -Weight: 2.3 kg

A hand sanding station from Aurtec is available. Sanding belt width: 150mm, belt length: 3500mm, belt thickness: 4mm, speed: 500rpm. Documentation available. On-site inspection is possible.

Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 3500 mm -Width: 1750 mm -Plate thickness: 50 mm -Plate: with support ribs -Dimensions: 3500/1750/H815 mm -Weight: 4750 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 610 mm -Length: 3.5 m -Transport dimensions: Ø 220 x 610 mm -Weight: 22 kg

Jasa 350 vertical bagging machine, The Jasa 350FV is a versatile, capable and reliable vertical packaging machine, Robust design, ideal for medium to large production volumes., Specifications, - Maximum Speed: 35 to 40 packages per minute, depending on the product and film settings., - Wrapping Film: Suitable for various types of films, such as PP, with the option for both barrier films and regular films., - Dimensions: The machine has a compact design, but the exact dimensions may vary depending on the specific configuration., - Cutting Mechanism: Automatic cutting mechanisms for precise sealing of the packages., - Settings: Digital settings for speed, temperature, and product configurations., - Temperature Control: To ensure optimal sealing, the temperature of the film machine is automatically regulated, providing reliable packaging., - Packaging Size: Various formats supplied from sto ...

length: 3500 mm width: 1000 mm depth: 1300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: Demag, compressor control from screw compressor type 350WS -Module: BT SBE 42008 TW-2294V-0 -Individual components: see photos -Dimensions: 395/105/H25 mm -Weight: 0.3 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Groove: 32 mm wide -Square: 95 x 35 mm -Length: 3500 mm -Weight: 70 kg

volume capacity: Filter 3200 connected load: 400 kVA weight of the machine ca.: 300 kg dimensions of the machine ca.: 1 x 1 x 2.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle diameter 135 mm Morse 6 Attachment Cone Max. drilling depth in 1 pass 600 mm Min. distance spindle-column axis 485 mm Max. distance between spindle and mast axis 3,500 mm Min. distance from spindle to table 520 mm Max. distance from spindle to table 1,845 Min distance from spindle to plate - base 1,130 mm Max. distance from spindle to plate - base 2,455 mm Min drilling radius from column axis 820 mm Max. drilling radius from column axis 3,875 mm Max. drilling diameter 78 mm stroke 8,000mm stolle top 10.000X2.500mm

roll diameter: 350 mm roll length: 700 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 22 kW Condition: used, overhauled Specification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers - roller diameter: 350 mm - roller length: 700 mm - Rollers: with core bore, with central chamber for water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tilting guide plates made of steel - New roller container, made of stainless steel, for holding mixture - bi-directional bars - two safety brakes for NOT stop - AC motor: 22 KW - 400 Volt - 50 Hz - New frequency converter system for va ...

Manufacturer : MKW Model : 50/SFT 350 Short Description: Stitcher