rs used for sale

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 5.8 kW -Output: 1500 l/min -Pump length: 1350 mm -Flange outer diameter: 250 mm -Flange inside diameter: 130 mm -Pump diameter: 210 mm -Weight: 170 kg

Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 21kW -Transport dimensions: 490/400/H490 mm -Weight: 30 kg

Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Control card, output card, control, memory module, PLC control, expansion module, interface module, analog module, analog module, analog output, interface module, communication processor -Manufacturer: Weidmüller, Interface Module -Type: RSSD 123436 -Quantity: 6x module available -Price per piece -Dimensions: 60/90/H75 mm -Weight: 0.1 kg/pc.

Interface converter, converter, module converter, FL Comserver, interface converter, interface converter, interface converter -Manufacturer: Converter, interface converter Interface Powered Converter unused original packaging -Type: ic485lp-1 RS232-RS422/485 -Dimensions cardboard: 180/115/H60 mm -Weight: 0.4 kg

Interface converter, converter, module converter, FL Comserver, interface converter, interface converter, interface converter -Manufacturer: Phoenix Contact, interface converter ovp -Type: PSM-EG-RS232/TTY-P/2K Ord.-No. 27 61 253 -Price per piece -Number: 2x converter available -Dimensions cardboard: 120/90/H70 mm -Weight: 0.3 kg/pc.

Controller, Ecograph, Alpha-Log, Data Recorder, Recorder, Color Hybrid Recorder -Endress Hauser: Alpha-Log color hybrid recorder with accessories -Recorder: Type RSA10-31B1T -Isolation amplifier: RN 221 -Modbus: RS 485 -Thermometer: TST 10 -Pressure transmitter: PMC 133 -Individual components: see photos -Price/handover: complete -Transport dimension: 500/500/H200 mm -Weight: 11 kg

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 -Individual components: see photos -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Repair service Reparatur Service POWER SUPPLY RS10-24 A for Mazak – Repair price 100 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. Repair of other power supplies on request. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

ROTOCONTROL RSI 430 LABEL INSPECTION MACHINE Manufacturer: Rotocontrol Type: RSI 430 Year of Production: 2009 Web width: 430 mm Max. Speed: 320m/min Max. Speed with Camera: 220 m/min Camera inspection: Yes – Nikka Inspection Camera Availabiltiy: Immediately Core shafts: 40 mm, 76 mm

PLC control, connection module for digital electronic modules, terminal module, repeater, splitter, star coupler -Manufacturer: ELW, splitter repeater type RS485 hub -Input: RS232 port -Output: 8x RS485 ports -Voltage: 230V 50Hz -Number: 3x splitter available -Price per piece -Dimensions: 270/150/H95 mm -Weight: 2 kg/pc.

Radio system, antenna contact module, wireless RF modem, Modbus -Manufacturer: TRL, radio system wireless RF modem ovp -Type: IRIS RS485-EXT-02 -Number: 2x module available -Price per piece -Dimension: 135/65/H30 mm -Weight: 0.1 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Reisser, solar fastener 8.0 x 125 10 pieces/box -Type: RSB-A-8.0/M10x125/50 -Material: stainless steel A2/galvanized -Number: 38 boxes available -Price: per box -Dimensions cardboard: 285/90/H75 mm -Weight: 1.2 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Reisser, solar fastener 8.0 x 150 10 pieces/box -Type: RSB-A-8.0/M10x150/50 -Material: stainless steel A2/galvanized -Number: 109 boxes available -Price: per box -Dimensions cardboard: 285/90/H75 mm -Weight: 1.2 kg

ROTOCONTROL RSH 440 ECOLINE  Age: 2020 – like new! Configuration:  440mm Wide Label Slitter Rewinder  Maximum Web Width 440mm,  Unwind (710mm Max Diameter)  Dual 450mm Rewind,  Max Mechanical Speed: 300m/min,  Servo Driven,  Web Guide,  Splice Table,  Shear Slitting Unit.  45mm, 40mm & 76mm mandrels

Friction spindle press, spindle press, press, friction spindle press, spindle percussion press -Manufacturer: Berrenberg, friction spindle press type RSPW 125/100 -Pressure capacity: 100 tons -Control: automatic, upgraded in 1993, see photos -Insert height: 480 mm -Stand distance: 560 mm -Table size: 540 x 560 mm - Stroke: 280mm -Punching fixture: Ø 50 mm -Dimensions: 1900/950/H3200 mm -Weight: 4820 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, 2 quick-change chucks / 6 sleeves -Types: FW4 RSWF 4 recording MK4 -Quick-change sleeves: 4x MK2, 1x MK3, 1x MK4 -Dimensions: 220/80/240 mm -Weight: 8.3 kg

Hydraulic pump, oil pump, gear pump -Shaft holder: Ø 16 mm -Price: per piece -Number: 1x available -Dimensions: 160/160/H179 mm -Weight: 7.7 kg

Ethernet switch -compact, industry-compatible switch for mounting on top hat rails -Number: 10 pieces available -Price: per piece -Dimensions: 130/125/H70 mm -Weight: 0.5 kg

Ethernet switch -Type: RS30-1602O6O6SDAEHH06.0.02 -compact, industry-compatible switch for mounting on top hat rails -Number: 4 pieces available -Price: per piece -Dimensions: 130/125/H110 mm -Weight: 0.7 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 121 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Brake -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 575/235/H210 mm -Weight: 31 kg

Front Cooking Regio – Station Rieber RST-11, 230 V, 96x72x139 cm Food dispenser, 230V, 3 kW, 16 A, up to 170°C, keep warm, regenerate, heated cover, light, thermal bridge, tray slide, tray rack with 8 x 1/1 GN inserts, adjustable sneeze guard glass, mobile, 2 locking wheels, original price 10782,00 €

DEMO MACHINE We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Polar Transomat Loader TRE RSL 160-7S - Application area: min. 450x500mm; max. 1.640x1.220mm - Layer height: max. 165mm - Lifting height: min. 170mm; max. 1,650mm - Load capacity: max. 300kg - Voltage: 400V/50Hz/3~ On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding

Vecoplan, not Lindner; Single-shaft shredder with feed hopper for refuse-derived fuel production, waste wood, waste and plastics, Material pusher to the rotor in the filling area Removal of contaminants from the pinball system, Screen inserts can be changed to your requirements! New rotor in 2017 with approx. 4000h running time New frequency converter in 2017 New service on the torque motor with 243kW, approx. 12900 operating hours in December 2023 Machine still under construction and available from February 2024 Subject to prior sale!

Control: HEIDENHAIN iTNC530 x-travel: 1500 mm y-travel: 800 mm z-travel: 1000 mm spindle head swivable left - right: 0-180 ° c-axis: 360 (0.001) ° b-axis: +/-90 (0.001) ° table-size: 1430X800 mm table diameter: 802 mm workpiece weight max.: 1500 kg tool magazin:: 60 spindle turning speed range: -16000 U/min spindle taper: HSK63 feeds x/y/z -stepless: 0-30000 mm/min feeds rotary table: 20 U/min dimensions of the machine ca.: 4x3.5x3 m weight of the machine ca.: 18 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Ing.Drüge, Hamburg 6 shaft shredder, YOC 2011, 15,0+22,0 Kw., 400 V., with control cabinet incl. reversing circuit Cutting opening: 600x800 mm, incl. hopper and steel construction Ideal for: files, PC hard drives, CDs, hollow bodies up to 3 ltr.

ID1855 Elba RSK 30C – Star Scraper year/Year of construction 1992 Elba Radialschrapp automat RS/M 40, 17,3 m, 4-part lattice boom for scrapers Elba RS/M 40 radial scraper machine, 17.3 m, 4-part lattice boom for scrapers

Key data: 150 mm, 500 mm, 100 mm

• with full enclosure • with functional guarantee

used Löwer belt sander RSM 2800 SX Grinding width approx. 200 mm Grinding height approx. 120 mm Belt length approx. 1600 mm Belt width approx. 200 mm

Used Injection Molding Machine Husky AE230 Year 2015 Injection Molding Machine The Husky AE230 manufactured in 2015 stands as a pinnacle of precision and reliability in the realm of preform molding machinery Crafted by Husky a recognized industry leader it boasts an array of technical features that position it as the premier choice for businesses in the bottling sector Remarkable Production Speed of the Used Injection molding machine Husky One of its standout features is the remarkable production speed clocking in at an impressive 18 000 preforms per hour BPH This rapid pace guarantees an uninterrupted and dependable production process an indispensable asset for large scale enterprises Efficiency and Safety of the Used Injection molding machine Husky The Husky AE230 is equipped with 48 cavities enabling the simultaneous production of a substantial number of preforms This feature signific ...

General SKU404S968 LocationBarneveld MakeH. Telschig Verfahrenstechnik GmbH & Co. KG (D) TypeRSM 6-60 No.0.333-82 Year of construction1982 Main Features MaterialStainless steel Motor0.25 KW Specified Features - Tumbler mixer Tumbler mixercheck Conical length230 mm (2x) Inletdia. 105 mm Outletdia. 105 mm With motor0.25 kW 220/380 volt With variable speed drivecheck Speed mixer19-95 rpm With liquid injectioncheck With safety gates(cover) MaterialStainless steel Information With switchcheck Weight200 Kg Floorspace1,3x0,5 M Total height0,7 MTumbler mixersTelschigMixers > Tumbler mixersBrand > Telschig What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mo ...

Key data: 320 mm, 1000 mm, 180 mm

• Internal and external cylindrical grinding • Hydrostatically mounted spindle for high surface quality • Solid machine frame for heavy workpieces • Swivel headstock for conical grinding of short workpieces • Integrated rapid traverse in the Z-axis with manual return • Comprehensive standard accessories

General SKU038S118 LocationBarneveld MakeDrais TypeU.Muehle RS20 (System Welte) No.53596 Year of construction1989 Specified Features - Sand mill Material finishCoating Pressure Working pressure jacket2 Bar Main Features MaterialCoated Volume8 Ltr. Motor4 KW Sand mills Vertical sandmill(1x) Capacity8 Ltr Housing dimensions Dia. 250-140x220mm With jacket(1,1 Ltr) Max. temperature80 Degr. C. Motor4 KW, 220/380 Volt with frequency controller Information With switchgearcheck Floorspace1,1x0,7 M Total height1,7 M Weight500 KG Extra SpecificationsRotor and grinding chamber are coated Technical specs Extra informationhouse: Dia. 250-140x220mmSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

Robot Kawasaki RS05L E-Controller with Cab Control: E-Controller Number of axles: 6 Max. load capacity: 5 kg Max. working area: 902 mm Year of construction: 12/2012 Scope of delivery : Robot, Controller, Cable, Teachpanel, Circuit diagrams Floppy disk drive for data backup 2 weeks start-up guarantee. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. The indicated retail price is exclusive of the statutory VAT of 19%.

Bowl cutter Meissner Type: RSM 325 Condition: Need renovation/used

Table dimensions: 1200x600 mm Fixing slots: 3 Longitudinal traverse (X-axis): 1350 mm Cross traverse (Y-axis): 560 mm Vertical traverse (Z-axis): 575 mm Grinding wheel dimensions: Ø 400x127x50/100 Grinding wheel power: 15 HP-1500 rpm Hydraulic pump power: 7,5 HP-1500 rpm Coolant supply power: 1/6 HP Approx machine weight: 5300 Kgs Equipped with: SELTER electromagnet: 1200x600 mm

Loser RS340 Round Grinder Sanding belt width 150mm Workpiece diameter 6-60mm Sanding belt speed 24m/sec 2.2kw main motor Material Receipt Dimensions of the machine 180x110x145cmH

Frame Sanding Machine Sanding Pad, Oscillation, Frame Sanding Device, Feed Belt, Belt Cleaning ---------- Technical Data ---------- Grinding width: 190 mm, max. workpiece thickness: 120 mm, speed: 6,11,16 m/min., motor: 5.5 kW, weight: 550 kg Sold as is, without technical inspection

Key data: 330 m², 7000 kg, 4600 mm

Extraction system Venti-Oelde Year: 1995 Filter flow rate 42000 m3/h Ventilators: 1 x 30 KW / 24,000 m3/h 1 x 15 KW / 5000 m3/h Trough Conveyor + Fan Return air

Description: Power: 2.2 kW (straightener) Max. Load capacity of the reel: 2000 kg Max. Winding diameter: approx. 1500 mm Approx. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 2,500 mm, weight approx.: 3,000 kg

Description: Machine number: 310060 Power requirement: 30 kW Permissible operating pressure: 10 bar Delivery rate: 4010 L/min Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,300 mm, weight approx.: 500 kg

Description: Machine number: 1009729 Operating voltage: 400 V Frequency: 50 Hz Power requirement: 30 kW Delivery rate: 4810 L/min Permissible operating overpressure: 10 bar Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,300 mm, weight approx.: 500 kg

used parts and components available from stock for Sabo 1203; 1500 (also new parts!); 1502D; RS84 Senior Ransomes 213 D, 350 D, Commander 3510, Fairway 405, MK IV, MK 11, Rider J74: mowing spindles, hydraulic components, engines, axles, wheel drives, hydrostats, hydraulic pumps, wheels and tires, steering parts, steering orbitels, etc. Other miscellaneous parts of Agria 9300, Jacobsen HR5111; 1471, Gutbrod 2850DA, Iseki div., Hako 1800-2750, John-Deere div., , Shibaura SP1840; CM364, Toro Pro81 etc. ... complete spindle units and 3-fold cylinder mowers Bucher, Loipfinger, Jacobsen as well as Ransomes and SABO, self-propelled Ransomes MK IV... Info and offers on request. No sending of package deals or lists.

Key data: 650 mm, 600 mm, 500 mm

Manufacturer : Hermle Model: C 30 U Number of machines : 2 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 115000 h Spindle running time : 24400 h Location : Germany Dismantling in week 5 / 2024 then from warehouse Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar poss ...

Key data: 1200 mm, 650 mm, 520 mm

5-axis machining center Hedelius RS 605-1200 & Indumatik Light Control: Heidenhain iTNC530 Travel: X-axis 1,200 mm Y-axis 650 mm Z-axis 520 mm Swivel and swivel table travel X/Y/Z 420 / 650 / 520mm Travel fixed machine table X/Y/Z 650 / 650 / 520 mm Feed rate 0 – 45 m/min Clamping surface: 850 x 600 mm Rotary axis: Ø 420 mm Mounting: SK 40 Tool magazine: 30 compartments Spindle speed: 50 - 12,000 rpm Max. torque: 111 Nm Accessories - Hand-held control unit - Paper belt filter system SKM 900 - IKZ 20 bar - Scraper belt conveyor - 2 x blow gun - Rinsing gun - M&H Infrared Probe - Hexagon table pushbutton - 3D Formingstar Package - Machine hood Indumatik Light Pallet Storage Year of construction: 06/2010 2 loading stations incl. 50 pallets incl. vice

YEAR: 1999 HYDRAULIC PRESSURE: 185 bar WEIGHT: 64000 kg INJECTION WORKING CAPACITY: 13800 SCREW DIAMETER: 135 INJECTION PRESSURE: 1600 bar INJECTION CAPACITY: 8588 cm3 HEATING CAPACITY: 109 kW OIL VOLUME: 2800 L STANDART DRIVE SCREW TORQUE: 11000 Nm SCREW SPEED: 113 rpm SCREW DRIVE POWER: 141 kW PLASTICIZING RATE: 152 g/s INJECTION RATE (50Hz): 1676 cm3/s INJECTION RATE (60Hz): 2048 cm3/s HIGH TORQUE DRIVE SCREW TORQUE: 12500 Nm SCREW SPEED: 85 rpm SCREW DRIVE POWER: 121 kW PLASTICIZING RATE: 152 g/s INJECTION RATE (50Hz): 1676 cm3/s INJECTION RATE (60Hz): 1676 cm3/s Note : Machine has some electronic problems

Key data: 15 mm, 2000 mm, 180 mm

The RSM C-Series models are precision cylindrical grinding machines designed for long and heavier workpieces. The series is suitable for the machining of individual parts as well as for small series production and offers additional flexibility with the internal grinding device. The classic design with a large machine bed, ground guides and powerful drives for the working spindle, grinding spindle and hydraulic unit makes these machines a cost-effective solution for precision grinding of larger workpieces. - Internal and external cylindrical grinding - Hydrostatically mounted spindle for high surface quality - Solid machine frame for heavy workpieces - Swivel headstock for conical grinding of short workpieces - Integrated rapid traverse in the Z-axis with manual return - Comprehensive standard accessories If you are interested, we will be happy to send you our complet ...

General SKU305U628 LocationBarneveld MakeEmde Nassau TypeRSK250X8200TL Mach.No.A409.0373-01 Main Features Motor4 KW Length8200 mm Inlet diameter210 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter300 mm Length8200 mm Between inlet and outlet7500 mm Shaft diameter250 mm Inlet210 mm Outlet210 mm With jacketcheck for cooling Motor400 volt, 3.3/4.0 kW, (Ex) With variable speed drive1420/2860 rpm Screw speed12/25 rpm MaterialStainless steel Information CEcheck Floorspace9,0 x 0,50 m Total height0,60 m ATEX compatiblecheckNew arrivalsHorizontal screw conveyorsEmde NassauNew arrivalsConveying systems > Horizontal screw conveyorsBrand > Emde Nassau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are ...