130,194 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
"RSA Heavy Duty Sawing, Deburring, Cleaning and Drying Center" for Steel Pipes The machining center consists of: 1) RSA Precision Speed Saw RASACUT SC 3000 with Bundle Loader 2) RSA linkage between the RSA RASACUT precision high-speed saw and the RSA RASAPLAN XY 3000 deburring system 3) RSA deburring system RASAPLAN XY 3000 4) Extraction system/wet separator for RSA deburring system RASAPLAN XY 3000 5) RSA Cleaning System RASACLEAN ET 3000 6) RSA Drying System TURBODRY Bundle loader extended for pipes up to 6,200 mm TECHNICAL DATA Lswvuey E Iype Nu Iehf Tube Ø: 6 mm to 55 mm Wall thicknesses: 1 - 6 mm Bar weight: max. 10 kg/m Materials: Steel Magnetism: max. 3 gauss Output lengths: 6200 mm sawable lengths: 150 - 3000 mm Limitation: Ø 6 – 7.9 mm max. length: 1200 mm Ø 8 – 9.9 mm max. length: 1500 mm Ø 10 – 12 mm max. length: 2000 mm Length tolerance ...
Briceder press RSN SP 250 P Don't. # 02 782 Without a control cabinet/control Without hosting 700 l cooling water tank available for hydraulick units L x B x H: 120 x 80 x 120 cm Built in 1992 Weight about 750 kg Dismantling by buyers The machine is in good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,
Interface converter, converter, module converter, FL Comserver, interface converter, interface converter, interface converter, -Manufacturer: RSF, Converter -Type: ZEV 5 Ord.-No. 14 369 519 -Number: 3x converter available -Price per piece -Dimension: 230/60/H35 mm -Weight: 0.3 kg/pc.
Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: RSA, Deburring machine type Deburrer DUO -Drive: 2.4/3.7 kW / 1500/3000 rpm -Brush: Ø 255 mm -Brush width: -Dimensions: 440/945/H1185 mm -Weight: 277 kg
Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display -for: turning and milling machines -Manufacturer: RSF Electronics -Type: MSA370.T4 -Dimensions: 1790/55/H38 mm -Weight: 5.5 kg
Digital ruler for press brakes, bending benches, guillotine shears... Glass ruler, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, linear encoder -Manufacturer: RSF Elektronik, linear encoder from press brake HACO type PPES 30135 -Type: MSA 3502 -Measuring length: approx. 270 mm -Quantity: 2x encoders available -Price per piece -Dimensions: 500/150/H50 mm -Weight: 5.4 kg/pc.
for glass scale, scale, digital display, measuring rod, length measuring system, linear scale, fluorescent display, glass scale, scale, length measuring device, linear scale, positioning display, digital scales, digital scale -Manufacturer: RSF Elektronik, digital display from coordinate measuring machine Stiefelmayer C 100 413514 -Type: Z 735M -Dimensions: 275/120/H170 mm -Weight: 3.4 kg
Machine number: ST-R-1660 Buerstentgratmaschine for the deburring of metal sheets or plates Power supply: 380 V 50 Hz 1.0/1.4 kW 2 speeds: 1500-3000 rpm. Brush diameter: 250 mm
· NON FERROUS SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 1000 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed adjustment of conveyor and separation drum · RAL color according to the customer´s choice · New machine manufactured in the EU
overbelt magnet ferrous separator magnet dimensions 1040 x 530 x 256 mm overall dimensions 2190 x 1214 x 635 mm total weight approx. 1020 kg motor 1,5 kW
For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station with level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.
Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.
Extraction system / briquetting press Extraction system 11 KW Briquetting press 7 KW
NON-FERROUS METAL SORTER - with vibrating feed conveyor and magnetic drums - For sorting e.g. iron, aluminium and copper - Conveyor width 500 mm - 14-pole concentric separation drum - Sturdy PVC strap - With control cabinet, 2 frequency converters for the band and the separation drum - Color according to customer requirements - New machine made in the EU
working width: 50 mm workpiece height: - mm wheel diameter: 250 mm grinding wheel width: max. 40 mm turning speed range: 1500 + 3000 U/min total power requirement: 1,0 / 1,4 kW weight of the machine ca.: 100 t dimensions of the machine ca.: 0,65 x 0,45 x 1,15 m Electric 380 Volt: Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technische specificaties Ingangsvermogen 1,5 / 2,4 kW Snelheid 1000 + 1500 toeren per minuut Werkstukgegevens Materialen staal, roestvrij staal, aluminium, non-ferrometalen Dwarsdoorsneden 20 x 20 tot 120 x 120 mm20 x 20 tot 150 x 150 mm10 x 10 tot 180 x 450 mm Ontbraamtijd secties 1 – 5, zware werkstukken 4 tot 12 sec.
Digital scale for press brake, edging bench, guillotine shears ... Glass scale, glass measuring stick, rule, digital display, measuring stick, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -from: Hammerle AP 100 press brake -Length unit: 420 mm -Number: 2x available -Price: complete -Dimensions: 550/80/H40 mm -Weight: 4.4 kg
Electric Drum Screen Machine Drum length 7000 mm, diameter 2000 mm Drive 22 kW incl. control cabinet incl. cleaning brushes Screen perforation and colour according to customer requirements ROBUST CONSTRUCTION ! Optional: Vibratory feed conveyor
- Drum length 5500 mm, diameter 2000 mm (as with Doppstadt SM 620) - Motor 15 kW - Control cabinet - Cleaning brush - Hole size of the drum according to customer requirements - New machine manufactured in Europe - Documentation and CE - 1 year warranty
Ethernet Switch, Industrial Ethernet Switch HIRSCHMANN RS20 - 800M2M2SDAE ( RS20-800M2M2SDAE ) for DIN rail mounting used, tested ! Dimensions: 130 x 110 x 75 mm
Speed-controlled screw compressor Renner RSKF 1-30 incl. refrigerant dryer and particulate filter Manufacturer Renner Machine number 1008121 Type RSKF 1-30 Year of construction 2021 max. pressure 10 bar Power consumption 30 kW Delivery rate 4,810 l/min Operating hours 11,760 B/h Load hours 8,671 B/h Machine utilization: 20-40% 799.87 B/h 40-60% 632.50 B/h 60-80% 427.45 B/h 80-100% 198.18 B/h Last service at 11,090 B/h incl. control unit for the frequency converter Particulate filter, connection cable and connection hose lxhxw 108x64x121 cm Weight 850 kg Loading costs 100,00 Euro Auction-ID: 04J-7Y8-1
Screw compressor Renner RSK 22 with refrigerant dryer Manufacturer Renner Machine number 21194 Type RSK 22 Year of construction 2009 max. pressure 10 bar Power consumption 22 kW Delivery rate 3,100 l/min Operating hours 35,160 B/h Load hours 10,416 B/h Nearest customer service in 1,986 B/h Test run carried out lxhxw 175x87x129 cm Weight 588 kg Loading costs 100,00 Euro Auction-ID: 04J-7XY-1
Router FL mGuard RS2000 TX/TX VPN, 2700642, Phönix, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
Ethernet Switch, Industrial Ethernet Switch HIRSCHMANN RS2-TX for DIN rail mounting Dimensions: 130 x 110 x 45 mm
Electronic Module, Interface Module ALLEN - BRADLEY DH+/Rs232 Interface 1785 - KE C ( 1785-KEC ) 96212871 B01 used, tested ! Dimensions: 255 x 160 x 30 mm
Pressure Control Valve NORGREN R64G-NNT-RSN p: 2 - 17 bar t max: 80 °C New ! Dimensions 200 x 80 x 80 mm
Current relay, electromechanical current relay, current monitoring ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RSf 5 ( RSf5 ) PL - No.: 770609 ( PL No.:770609 ) In: 2 A 1.6 - 3.2 A 50 Hz TGL 200-3787 New !' Dimensions: 145 x 130 x 100 mm
Vibration damper, compensator PAGUS DN 50 RSt 37-2Z flange: Ø 160 mm New ! Dimensions: 165 x 165 x 150 mm
Directional Control Valve COAX RSV 40 NC 19 40C111/2DC 24W
Ratiostretch RS10/2 RA1978 Height: 2540 mm Width: 1650 mm Turntable diameter: 1650 mm Length: 2600 mm maximum rewindable product weight:2000 kg maximum wrappable product height: 2330 mm maximum wrappable product basic dimensions 1100x1200 mm Turntable speed: 12 rpm (max.) / 3 rpm (min.) Lifting carriage speed: 4 m/min (max.) / 0.6 m/min (min.) Turntable height: 85 mm Voltage: 230V, 50Hz, 6A Year of manufacture 2012 weight: 480 kg Foil width: 450-500 mm Foil diameter: 240 mm Roll weight: up to 20 kg Foil thickness: from 7 µm Current mounting: embedded in floor, optional drive-on ramp available Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Max. Palettenabmessungen: 1100 x 1200 mm Max. Palettengewicht: 2000 Max. Palettenhöhe: 2330 Rotating plate diameter: 1650 Masthöhe: 2540 Drehtellerhöhe: 85 Width in mm: 1650 Länge in mm: 2600 Const ...
Screw compressor RENNER RSDK-PRO 3.0 year 2021 10 bar, 410 ltr/min, 3 kW, compressed air dryer RENNER RKT+0035 type 1481A 16 bar year 2020/21, S/N 200030820, 90 l pressure vessel BWB 366 913 11 bar year 2020
Machine number: 32099/90 BE Drive power: 8.5 kW Electrical connection: 380 V, 50 Hz for deburring various elongated components Lengths from 200 mm to approx. 900 mm (without guarantee) incl. extraction
Machine number: 32099/90 BE Drive power: 8.5 kW Electrical connection: 380 V, 50 Hz for deburring various elongated components Lengths from 200 mm to approx. 900 mm (without guarantee) incl. extraction Auction-ID: A7-46287-168
12000 ANSI lumens, 1,400x1,050 SXGA+, 3-chip DLP; Video signal input: HDMI, DVI, SDI, DIGITAL LINK; electrical connection: 100-240 V - 50/60 Hz; Color: Black Auction-ID: A7-46311-6
Equipped with three-point linkage, PTO and support legs Auction-ID: A1-40137-384
Volume flow: 18.16 mc/min Operating pressure: 13 bar Suction pressure: 1 bar Speed: 2200 rpm Approximate dimensions: 2500 x 1400 x 2200 mm Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-711
Circuit board for XRG160, XRC RS232, Bosello, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - We assume that the item has never been used, as there are no traces of mounting on the aluminium body. That is why we also offer a 6-month warranty. Technical data: XRAY R1 S.n. 3324012 XRC RS232 S.n. 11171812 For XRG 160-1.6 Small I With MXR-160HP/11 H.T. Cable max. 20m 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is ...
Circuit board for XRG150, XRC RS232, Bosello, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - We assume that the item has never been used, as there are no traces of mounting on the aluminium body. That is why we also offer a 6-month warranty. Technical data: XRAY R1 S.n. 662898 XRC RS232 S.n. 00642698 For XRG 150 With MXR-160/0.4-0.4 H.T. Cable 5m 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for di ...
Pile lifter Rachner RSL 50-A; Condition unused; Platform size 890x630mm; Load capacity 650KG; Automatic mode with light barrier. Pile lift Rachner RSL 50-A; condition never used; size 890x630mm; lifitng capacity 650 kg; autimatic mode with light bar.
travel -x axis: 1.000 mm travel -y axis: 510 mm travel -z axis: 480 mm travel of - x axis (rotary-tilting table): 420 mm travel - x axis (fixed machine table): 450 mm control: HEIDENHAIN iTNC 530 turning speed range: 50 - 12.000 U/min numbers of positions in the tool changer: 20 tool taper: SK40 table surface area: 650 x 510 mm workpiece weight: 300 kg Clamping surface of rotary-tilting table: 420 mm workpiece weight: 200 kg speeds of rotary table: 30 U/min 5-axis machining center | HEDELIUS - RS505 K IC 40/530/450/420/12, equipped with tool changer, ITC, zero-point clamping system and chip conveyor. In addition, the machine features a full enclosure and an extraction system with filter unit. With only 9,787 spindle hours, the unit shows low operating time. The machine is in a well-maintained condition and can be inspected at any time under power. A machine video can be provided on requ ...
This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre. Contact us for more information.
This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine.
maximum number of results exceeded
please refine your search
1.800 € 
