129,504 used machines on RESALE, but how to find them? Machine Search
3 UNITS/SETS OF ATT0010 PACKED TOGETHER. A SINGLE ATT0010 CORRESPONDS TO: Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 480 x 200 x 180 mm; Approx. Weight: 32kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0010 PACKED TOGETHER: 480 x 600 x h180 mm - 96 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-53
Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 480 x 200 x 180 mm; Approx. Weight: 32kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-307
Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from \"0\"). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. Machine condition: unchecked. Approx. Transport dimension: LxWxH 745 x 350 x 145 mm; Approx. Weight: 7kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-278
Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-154
Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 250 x 90 x 90 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-148
The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution, this model offers motorized blinds on two sides controlled by remote control. Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjus ...
5 UNITS/SETS OF ATT0018 PACKED TOGETHER. A SINGLE ATT0018 CORRESPONDS TO: Material: 20CrMnTi, Usage: Suitable for grinding, milling, precision machining, double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (50x65 mm, h 25 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 200 x 90 x 90 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x ATT0018 PACKED TOGETHER: 200 x 450 x h90 mm - 25 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-242
Professional outside micrometer with a range of 25-50 mm, resolution 0.01 mm. The positive spindle lock holds the anvils in place to ensure accurate measurement registration. High-quality construction combined with easy handling makes this type of analogue micrometer particularly suitable for control operators, workshop technicians, repairers and service personnel. It is supplied in a wooden case for storage and easy transport. Machine condition: unchecked. Approx. Transport dimension: LxWxH 210 x 120 x 35 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-325
Equipped with: towbar air suspension seat, articulated and pivot steering, hydraulic quick coupler, extra hydraulic connections at boom, forks with carriage, excavator bucket, work lights, 2x wheel chocks Auction-ID: A1-40136-41
3 UNITS/SETS OF ATT0039 PACKED TOGETHER. A SINGLE ATT0039 CORRESPONDS TO: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0039 PACKED TOGETHER: 650 x 1350 x h185 mm - 348 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-129
5000 ANSI Lumens, 1024x768 XGA, 3LCD; Video signal input: DVI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White Auction-ID: A7-46311-23
5 UNITS/SETS OF ATT0014 PACKED TOGETHER. A SINGLE ATT0014 CORRESPONDS TO: Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 250 x 90 x 90 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x ATT0014 PACKED TOGETHER: 250 x 450 x h90 mm - 15 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-98
Hatz Diesel Forward -backward Widening plates Electrically strart Vibration plate has been checked and is in good working order Auction-ID: A1-41964-32
5 UNITS/SETS OF ATT0014 PACKED TOGETHER. A SINGLE ATT0014 CORRESPONDS TO: Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 250 x 90 x 90 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x ATT0014 PACKED TOGETHER: 250 x 450 x h90 mm - 15 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-204
5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White Auction-ID: A7-46311-32
The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution. Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjustable ventilation and light: The upper slats are adjustable, allowing precise ...
5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White; Dimensions box: 59x49x26 cm (L/W/H), total weight: 14 kg Auction-ID: A7-46311-29
5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White; Dimensions box: 59x49x26 cm (L/W/H), total weight: 14 kg Auction-ID: A7-46311-28
Technical Specifications Height of the tips: 500 mm Center spacing: 6000 mm Maximum turning diameter on bench: 1000 mm Maximum turning diameter on carriage: 310 mm Bar passing: 150 mm Accessories: Rapid feed on carriage ; Fixed steady rest ; Platform Item sold in unverified status Auction-ID: A1-44614-12
5000 ANSI lumens, 1,920x1,080 Full HD, DLP; Video signal input: HDMI, HDBaseT; electrical connection: 100-240 V - 50/60 Hz; Colour: Anthracite Auction-ID: A7-46311-18
5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White; Dimensions box: 59x49x26 cm (L/W/H), total weight: 14 kg Auction-ID: A7-46311-31
Batch of 50 pieces of composite corner profiles for facade cladding. Color black, length 280 cm. Packed per 3 in foil. Risk of minor damage. Auction-ID: A1-40136-369
5000 ANSI lumens, 1,920x1,080 Full HD, DLP; Video signal input: HDMI, HDBaseT; electrical connection: 100-240 V - 50/60 Hz; Colour: Anthracite Auction-ID: A7-46311-17
5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White; Dimensions box: 59x49x26 cm (L/W/H), total weight: 14 kg Auction-ID: A7-46311-30
9500 ANSI Lumens, 3,840x2,160 4K UHD, DLP; Video signal input: HDMI, SDI, HDBaseT; electrical connection: 100-240 V - 50/60 Hz; Color: Black; Transport crate dimensions: 90x72x47 cm (L/W/H), total weight: 81 kg Auction-ID: A7-46311-9
3M Scotch-Brite ribbon roller refills Weight: 56KG net Auction-ID: A1-46070-293
Unused ; UWM 500 welding manipulator ; MIG/MAG CO2 and TIG ; capacity vertical 500 kg ; horizontal capacity 250 kg ; tiltable up to 135° ; table diameter 550 mm ; rotation speed 0–5 rpm ; 230 V ; foot control ; Machine weight approx. 220 kg Auction-ID: A1-45170-15
General overhauled, new seals etc. Auction-ID: A1-46315-42
SKF - 29496 EM - Solid metal cage barrel bearing Auction-ID: A1-46070-329
Lot Schneider Electric KNX Access RTC glass black MTN6903-6214 (50x) Auction-ID: A1-46070-4
Steel construction - mezzanine, 500kg/m2, approx. 2,000 m2 available - used - : Price from location: now only 79,000 € instead of 130,000 € (net), dismantled, packed and loaded. Particleboard is available for about 60% of the area – but in not so good condition! Manufacturer: Pro Man Type: Mezzanine Year of Make: 2007 Max. stage load: 500kg/m2 Floor height (upper edge of floor covering): 3,462mm Bottom edge beam: 3,230mm Dimensions: 71,000 mm x 28,000 mm. approx. 1,988 sqm OK Platform: 3,462 mm UK Stage: 3,220 mm Flooring 38 mm chipboard 1 pallet transfer station Wheelbase: 4 x 4m Stage covering was partly chipboard (38mm), partly gratings Bottom edge chipboard: white Condition: very good Available: immediately Location: Niedernberg near Aschaffenburg There are additional costs for the buyer: new screws, etc. Accessories (stairs, railings, pallet tr ...
Original LINCK chain conveyor with steel carriers length A-A approx. 6,500 mm
\" Mitutoyo Digital Screw Gauge 25–50 mm – 0.001 mm – IP54 – Type MDC-50J Digital Screw Gauge from the manufacturer Mitutoyo from the MDC series. The gauge covers the range of 25-50 mm and offers a high-resolution reading of 0.001 mm. The version is IP54 protected and therefore suitable for workshop use. The device is housed in the original Mitutoyo plastic case with insert. • Manufacturer: Mitutoyo • Type: MDC-50J / Item No. 293-286 • Measuring range: 25–50 mm • Resolution: 0.001 mm • Degree of protection: IP54 • Version: Digital, metric \" Auction-ID: A7-46417-213
Hydraulic-mechanical 4 wheel cold milling machine for asphalt and concrete, milling drum between the rear wheels, milling width can be reduced by dismantling half shells of 250 mm each, hydromechanical drive, hydraulic steering (front axle as steering axle, front axle as steering axle, front axle as steering axle, hydraulic steering machine) Auction-ID: 04B-721-4
\" Mitutoyo ABSOLUTE Digimatic caliper with digital display. Version with ABS measuring system (no loss of reference when switched on). Condition: Used, good condition. Measuring surfaces clean, rail slightly used with usual signs of use. Display functional (according to visual inspection), no cracks. Item: Digital caliper Manufacturer: Mitutoyo Model / Type: ABSOLUTE Digimatic Code No.: 500-181-20 Measuring range: 0–150 mm Origin: Made in Japan • Measuring range: 0–150 mm • Reading: 0.01 mm • System: ABSOLUTE Digimatic • Functions: On/Off, Zero/ABS • Material: Stainless steel, hardened • Manufacturer: Mitutoyo Corp., Japan \" Auction-ID: A7-46417-151
Column-mounted slewing crane 2,500 kg with electric chain hoist Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: ZSD 2500-6/4,5 Year of construction: 2006 Factory no.: 049/06 Column-mounted slewing crane make Mechanik Taucha with a load capacity of 2,500 kg. The system is equipped with an electric chain hoist from the Demag brand. The stroke is carried out electrically via a Demag electric chain hoist type DKUN 16-1250 with two speeds (fine stroke / fast stroke). The chain hoist moves back and forth electrically on the boom (trolley ride). The swinging movement of the boom is electric. Operation via pendant switch control with emergency stop. System consisting of column, boom, swivel drive and electric chain hoist. Column-mounted slewing crane Boom approx. 5 m Electric chain hoist Demag electric trolley travel Electric slewing mechanism Pendant switch control A test book for t ...
\" Workbench / laboratory bench 1100 × 500 × 750 mm – with 4 drawers – without contents Workbench or laboratory bench in solid design. Robust worktop • Right side with 4 metal drawers • Left side open (legroom / device storage) • Sheet steel body • Powder-coated surface Dimensions (approx.): Width: 1,100 mm Depth: 500 mm Height: 750 mm \" Auction-ID: A7-46417-305
Column slewing crane 500 kg with electric chain hoist Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: (nameplate not clearly legible) Year of construction: not known Column slewing crane make Mechanik Taucha with a load capacity of 500 kg. The system is equipped with an LIFTKET electric chain hoist. The stroke is carried out electrically via the electric chain hoist. The movement of the trolley on the boom is manual (forward/backward). The swivel movement of the crane is also manual. Operation via pendant button control. System consisting of column, boom and electric chain hoist. Column-mounted slewing crane Boom approx. 5 m LIFTKET electric chain hoist Manual trolley travel Manual swivel movement Pendant switch control A test book for the crane system is available. Viewing and test run under voltage possible by appointment. Load capacity: 500 kg Hoist Electric chain hoist m ...
\" Pillar slewing crane 500 kg with electric chain LIFTKET – radius 4,000 mm • Manufacturer Mechanik Taucha Fördertechnik GmbH • Type / model GSX 500-3.5/3.25 Pillar slewing crane make Mechanik Taucha, year of construction 2001.Equipment : • Load capacity 500 kg • Radius 4,000 mm • Electric chain make LIFTKET • Electric drive (electric feed of the trolley) • Two-stage hoist with fine stroke • Suspension switch • Column mounting • Nameplate available Dimensions: • H1 (total height): 3,500 mm • H2 (hook height): 2,750 mm • A (radius): 4,000 mm Condition: Used, dismantled during operation. Usual age-related signs of wear. Lifting capacity: 500 kg Year: 2001 Type: GSX 500-3.5/3.25 Hoist: electric, 2-stage with fine lift Chassis: electrically movable Swivel range: column-guided Manufacturer's hoist: LIFTKET\" Auction-ID: A7-46417-372
Digital Internal Gauge for Large Diameters – 300–500 mm – Messwerk XT – Bowers / messwelk Digital bore gauge for large diameters in an original wooden box. The system is designed for precise internal measurements in the range of 300 to 500 mm and is based on the Bowers XT (Xtreme) measuring mechanism with digital display. • Digital indoor measuring device with XT measuring mechanism (IP65) • Measuring body / measuring bridge • Extensive set of interchangeable measuring heads / probes • Adjustment ring XT 300 mm (separate wooden box) • Original wooden boxes Condition: • Used, overall neat co ...
\" Column-mounted slewing crane with two booms and two electric chain hoists Manufacturer Crane system: Mechanik Taucha Fördertechnik GmbH Year: not known Stable column-mounted slewing crane system with two parallel booms for supplying several machine workstations. The crane is equipped with two different electric chain hoists: • 500 kg main load capacity with LIFTKET electric chain hoist • 70 kg secondary lift with DEMAG electric chain hoist The main lift is suitable for workpieces, clamping devices or fixtures up to 500 kg. The second boom with a load capacity of 70 kg is ideal for smaller components or tools. The stroke is carried out electrically via the respective chain hoists. The movement of the trolleys on the outriggers is manual (forwards / backwards). The swivel movement of the entire crane system is carried out manually via the column. Operation via pendant switch cont ...
• Manufacturer VEB METAN, 9318 Tannenberg / Erzgebirge • Type / Model Tool Cabinet Model I • Name Steel Tool Cabinet METAN Model I • Description, Accessories, Condition Stable DDR tool cabinet in welded sheet steel design. Version with one door, a drawer in the upper area and several shelves. Industrial version in typical green paintwork. Used condition with age-related paint damage, scratches and corrosion approaches. Cabinet is sold without contents. • Technical data External dimensions according to the nameplate: approx. 965 x 500 x 400 mm Sheet steel construction 1 door 1 drawer Several shelves Auction-ID: A7-46417-356
\" Renishaw ball stylus for use on coordinate measuring machines (CMMs). • Manufacturer: Renishaw • Manufacturer no.: A-5000-7721 • Type: Ball button / stylus • Ball material: Plastic / rubber (black) • Shaft material: Metal • Thread: Renishaw standard (external thread, exact size not specified) • Application: Coordinate measuring machines (CMM) • Compatibility: Renishaw pushbutton systems \" Auction-ID: A7-46417-264
Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7121 Auction-ID: A1-45902-88
\" ÖSTLING EU-CLASSIC Electrolytic Marking System 300/500 VA Used electrolytic marking system from the manufacturer ÖSTLING Markiersysteme GmbH, type EU-CLASSIC. The device is used for permanent marking of metal surfaces by means of electrolytic marking (e.g. nameplates, serial numbers, logos, workpiece marking). Version with digital control panel and adjustable parameters. Scope of delivery according to pictures: • Control unit EU-CLASSIC • Marking handpiece • Connection cables • Container for electrolyte • Operating instructions • Floppy disk / license documents for stencil creation Type plate information: • Type: EU CLASSIC • Year of construction: 1998 • Nominal voltage: 115 / 230 V • Power: 300 / 500 VA • Output voltage: 0–30 V AC/DC Usage condition with usual signs of use. • Manufacturer: ÖSTLING Markiersysteme GmbH, Solingen • Model: EU-CLASSIC ...
\" (2x) Tool cabinet model I – industrial version • Manufacturer VEB METAN Tannenberg / Erzgebirge (MEIAN) • Type / model tool cabinet model I 2 pieces compact tool cabinets in heavy sheet steel design. Nameplate: Tool cabinet Model I Size: 965 x 500 x 400 mm TGL 48-52110 ELN-NO. 13961160 Version with: • 1 hinged door per cabinet • Internal shelf • Drawer in the upper area • Stable welded steel body Condition: Used with clear signs of wear (paint damage, rust builds, soiling). Technically functional. Sale without content. Manufacturer: VEB METAN Model: I Dimensions per cabinet: 500 x 400 x 965 mm (W x D x H) Type: Welded sheet steel \" Auction-ID: A7-46417-366
\" Lot of casting ladles / metal ladles – approx. 500 kg – 4 pieces of batch consisting of 4 casting ladles for molten metals in different designs. Suitable for aluminum, bronze or non-ferrous metal foundries. Equipment • Crane eyes / carrying brackets • Some with inner struts • One pan with lid Condition From stock of a foundry. Sale as shown. Capacity: up to approx. 500 kg Number of pieces: 4 pieces \" Auction-ID: A7-46417-381
Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 6739 Auction-ID: A1-45902-86
\" Calibration gauge for tip calipers 0–500 mm Calibration gauge for tip calipers in a wooden case. The gauge is used to check and adjust tip calipers over defined test distances. Several reference dimensions are engraved on the bar. The design is made as a solid, ground steel strip with threaded holes on the sides for mounting or fixing. Engraved reference dimensions (visible): 10 mm / 10.00 mm / 20.30 mm / 60.0 mm / 80.50 mm / 120.41 mm / 160.72 mm / 380.15 mm Total length according to the tape measure approx. 500 mm. Type: Calibration gauge for tip calipers Measuring range: up to approx. 500 mm Material: steel, ground Reference points: several engraved test distances Design: with threaded holes \" Auction-ID: A7-46417-334
\" 2 pieces of sturdy steel cabinets in a classic workshop design. The cabinets are ideal for storing tools, materials or operating equipment. • lockable (lock available, key not available) • number: 2 pieces • dimensions per cabinet: approx. 1000 x 500 x 1900 mm • material: sheet steel • type: \"Hinged doors \" Auction-ID: A7-46417-409
maximum number of results exceeded
please refine your search
269 € 
