rs 50 used for sale

Length approx. 1100 D = 450 to shut off channels. With two compressed air connections and drawbar eyes. See PDF

Power: 4,000 - 4,500 / hour Number of cars: 2-railway-round runners current Cup format: Ø 60 mm, height: 80 mm maximum Cup size: Ø 75 mm, height: 80 mm Mainfiller: -for liquid products -Manufacturer: Hamba -Filling volume: 50-250 cm3 -Cleaning: CIP capable Closure: Sealing Dimensions (Lxwxh): 1.45 x 1.45 m x 2.7 m Power consumption: 400 V; 12.5 A; 5 KW Air requirement: 10.000 L / h. Schuy can general overhaul this system for you. This applied all electrical and pneumatic components on the latest state of the art and mechanical components are obsolete and are 80% new quality available. You will also receive a 1 year guarantee for the plant. Please contact us.

Used chamber filter press / filter press Rittershaus & Blecher / R & B 500 x 500 Side holm guided Plate size: 500x500mm Cake thickness: 25 mm Useful length: 2200 mm Chamber number: 47 pieces Filter pressure: 15 bar Closing pressure: min. 220 bar / max. 260 bar Cake volume: approx. 3.9 m3 Total filter area: approx. 17.4 m2 Expiration: closed Plate material: PP Plate transport: manual Filter cloths: optional Pump: Abel diaphragm pump optional

A fireproof card box approx. 500 kg of own weight. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and erro ...

Lift table Hydr. mobile FHT 500 technical data: load-carrying capacity 500 kg table dimension 855x500x50 mm Max vertical lift 900 mm min table height 340 mm clutch height 970 mm foot pedal beating to max. height 55 roles of diameters 127 mm net weight 120 kg SPECIAL PRICE ASKS ASK FOR!

for the storage of hot water / firefighting water. Dimensions: 2.50 m = D - L = approx. 10.70 m The container is used, empty inside and professionally cleaned and is outside with a coat of bitumen / bitumen insulation provided. Light insulation damage caused by construction and transport may be available at the reservoir. Price from Söhrewald - free of charge-

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

X-ray tube assembly type SRM 2250 red abzugen GS-500.

Frequency converter soft start 8.3 kVA SEW Movitrac Used frequency inverters, approximately 3 years in operation, increasing the engine power, currently no longer in use. Unit tested and fully functional. Technical data: f input = 50-60 Hz f output = 0-400 Hz power 8, 3kVA in = UE = 380-500V 12A UA UE = No guarantee you can return but within according to the FU 10 business days and we will refund the purchase price. Information at 0170-2204056 or fa.raupp@t-online

Ladies and gentlemen, we are happy to offer you wheat flour in different categories to be able to offer. Please send us your request. We will be happy to answer your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. i ...

used, kpl. 1 year warranty, plate size 500 x 500 mm, 30 plates, open outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 115 liters, filter area 12m2, dimensions 3000 x 1000 x 1400 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

1 x 6 Naturkorker Bertolaso, type: Delta 506R, 1994, li-re, performance: approx. 8,000 bottles / h, format parts: 1.0 ltr.,. Price: 7.900,-plus VAT from stock Dolgesheim

; ready for operation

For Amos press 1600 3 Steück new mesh belts type 5060 22600 Mm Width 1600 mm Chain and closure polyester unit price 2250,-

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

AGFA Motor for the cutter of SelectSet 5000. Including Belt. Available: now

AGFA Cutter for SelectSet 5000. Including Belt, Stillage and Knife. Available: now

size 59 x 74 cm Perfecting 8/0 - 4/4 Color-Pilot-Plus ink control system AIR Center (Rietschle) Technotrans temperation Technotrans combi cooling device with external condensator washing device for printing cylinder Quickstart Low Coverage stabilisation Powder (Hitronic) Inline Observer Optiprint Jackets preparation for colour temperation Non Stop semiautomat delivery Still in operation: Yes Available: sofort

AGFA Laser for SelectSet 5000 including PowerSupply. The Laser is tested and working - see picture. We can send you the original picture in high resolution where you can see clearly the Laser running. Available: now

AGFA Laser for SelectSet 5000. The Laser is tested and working - see picture. We can send you the original picture in high resolution where you can see clearly the Laser running. Available: now

Type: Jumbo KODUKO 16-500 / DF510 / SKM103-03 Capacity: 2500 kg / h Cooking time: 120 min Type: Schroder DF510 Hopper diameter: 600 mm Hopper lenght: 520 mm Power: 0.12 kW Type: Schroder SKM103 Dimension: 2500 x 3375 x 2510

Make: GEA Küba Germany Type: CAV N09-2X3C Power: 606/497 kW (star/triangle connection) Pipe capacity: 209l 2 split circles with 3 fans each 6 fans a 900mm diameter

Oel-Diffusion pump Manufacturer: Leybold Type: DIP 50,000 Status: used Technical data Product: DIP 50000 Catalogue: 22240 Connection flange Suction side: DN 1000 ISO-F Connection flange Print side: DN 160 ISO-K Suction Below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l/s working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Max. pre-vacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Equipment: Pump is delivered without equipment quantity of equipment min.: 12.0 l 12.7 qt max.: 25.0 l 26.4 qt grid connection: 3-ph Y, 400 V, 50/60 Hz Heating capacity: 24 kW Number of heating cartridges: 24 Heating time: < 30 min Number of cooling water circuits: 3 Cooling water minimum pump: 1500 l/h 6.6 gal/min Duesenhut steam barrier: 150 l/h 0.66 gal/min Max. Cooling water pressure: 6 bar 87 psi Cooling water connection pump: 1/ ...

Table 486 x 280 mm, X/Y/Z = 300/200/300 mm

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Working length: 1040 mm max sheet thickness: 1.5 mm aluminium: 2.0 mm stainless steel: 1.0 mm maximum opening width with segments: 95 mm maximum opening width without segments: closed 235 mm maximum passage height: 90 mm rear gauge: 530 mm bending angle: 0-140° working height: 1005 mm width: 1570 mm depth: 820 mm height: 1270 mm weight approx.: 310 kg

Cutting length: 5000 mm blade diameter: depending on need 420-550 mm saw aggregate pneumatic swivel 45-90° Blade drive: 380 V, per 3 kW space: 6400 x 1400 x 1700 mm weight: approx. 1600 kg

Power: 500 kVA / 400 kW Diesel engine / type: MTU / 12V183TB32 Cylinder: V12 Cooling: liquid-cooled Generator / type: NEWAGE STAMFORD / HCI 534 D2 Voltage: 400 / 231 V Frequency: 50 Hz Speed: 1500 min-1 Type: complete unit in the sound-proof 20' - HC-container Tank: 1500 litres Switchgear / Starter: automatic switchgear with handover synchronisation. Battery voltage / capacity: 24 V Generator switch: Yes Power switch: No Automatic: Yes Dimensions (L X W X H): approx. 6150 x 2480 x 2896 mm Weight: approx. 12000 kg Year built: 1996 / 2010

Power: 500 kVA / 400 kW Diesel engine / type: VOLVO / TAD 1631 GE Cylinders: number 6 Cooling: liquid-cooled Generator / type: MECC ALTE / ECN 40 SC/4 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: complete unit in the soundproofed 20 container Tank: 1000 liters Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24V Generator switch: Yes Power switch: Yes Automatic: Kuhse Dimensions (L X W X H): approx. 6100 x 2340 x 2380 mm Weight: approx. 9000 kg

Oil diffusion pump Manufacturer: Leybold type: DIP 50,000 Status: used Technical data Product: DIP 50000 cat. No.: 22240 Suction side connection flange: DN 1000 ISO-F Connection flange printed page: DN 160 ISO-K Pumping speed for air below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l / s Working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final total pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Maximum permissible forevacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Resources: Pump delivered without resources Amount of resources min: 12.0 l 12.7 qt Max: 25.0 l 26.4 qt Power supply: 3-ph Y, 400 V, 50/60 Hz Heating power: 24 kW Number of cartridges: 24 Heating-up time: < 30 min Number of cooling circuits: 3 Minimal cooling water Pump: 1500 l / h 6,6 gal / min Jets Hat vapor barrier: 150 l / h 0.66 gal / min Cooling water pressure: 6 ba ...

Technical data: -Coil weight: 3.000 kg -Strip width: 1,000 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. -Coil outer diameter. 1500 mm

Complete brewery brewhouse 500 l / 6 fermentation tanks

Jig

500 ton x 5000mm Y1 Y2 X1 X2 R1 R2 Z1 Z2

Lot 592 500L steam jacketed hemispherical scrape surface vessel, bottom central discharge, half moon lid, agitator (six sets of removable propellers along shaft)

Stein RAKO 500 smokehouse, electical heated, all stianless steel, cooking, baking, smoking, smoke system for wood chips. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Bearing platform 4,000 x 5,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 2 main beams C+300 x 3 x 3,990 mm (perforated) 5 cross beams S+300 x 2 x 4,800 mm (closed) 10 mounting angles 2 Cross Associations 9 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 5,000 mm Floor area: approx. 20 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Inhpbdx Columns: 100 x 100 x 3 mm Main beam: C-Profile C+300 x 3 mm (perforated) Cross member: Sigma profiles S+300 x 2 mm (closed) Flooring: 38 mm chipboard, white on one side P6 Columns in the following standard colors: Ral 7035, light grey Ral 70 ...

Bearing platform 4,000 x 15,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 4 stands, double-sided 100 x 100 x 3 mm 6Main carrier C+300 x 3 x 4,190 mm 15 cross member S+300 x 2 x 4,800 mm 30 Mounting angle 4 Cross Associations 27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural UK white, OK nature incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 15,000 mm Floor area: approx. 60 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Columns: 100 x 100 x 3 mm Main carrier: C-Profile C+300 x 3 mm Cross member: Sigma profiles S+300 x 2 mm Flooring: 38 mm chipboard, white on one side Columns in the following standard colors: Ral 7035,  ...

Bearing platform 8,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 8,000 x 5,000 mm Dimensions floor area: 8,000 x 5,000 mm Floor area: approx. 40 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: Ok minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 6 steel tube supports 100 x 100 x 3 mm 4 main beams C+300 x 3 x 3,990 mm (perforated) 9 cross beams S+300 x 2 x 4,800 mm (closed) 18 Mounting angle 3 Cross Associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035, light grey Ral 7016, anthracite grey Ral 3000, red, fire Ral 5003, sapphire blue (Other colors on request!) Main and cross beams galvani ...

Bearing platform 12,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data: Dimensions steel construction: 12,000 x 5,000 mm Dimensions floor area: 12,000 x 5,000 mm Floor area: approx. 60 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: OK minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 8 stand, one side 100 x 100 x 3 mm 6 main beam C+300 x 3 mm, L = 3,990 mm (perforated) 13 cross member S+300 x 2 mm, L = 4,800 mm (closed) 26 Mounting angle 3 Cross Associations 24 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000 fire red Ral 5003 sapphire blue (other colors on request) Main and cross bea ...

Bearing platform 16,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 16,000 x 5,000 mm Dimensions floor area max.: 16,000 x 5,000 mm Floor area: approx. 80 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: OK minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 10 stand, one side 100 x 100 x 3 mm 8 main beam C+300 x 3 mm, L = 3,990 mm 18 cross member S+300 x 2 mm, L = 4,800 mm 36 Mounting angle 4 Cross Associations 33 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000, red, fire Ral 5003 sapphire blue (other colors on request) Main and cross beams galvanized  ...

Sideloader ICEM GTE 20/502-4 d Four way forklift Strength 12500 kg Forks 800 mm Masch. No. 17346 Lifting height mm 5020 Height 2300 mm Free stroke 1200 mm Electric motor Batteries good Battery charger available Built in 2005 Weight without battery 2000 kg L x W x H: 240 x 180 x 220 cm The machine is in perfect condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Key data: 3000 , 1500

Technical data: Height 300 mm Length 3.000 mm Width 1,500 mm

Storage tank for wine, beer, sparkling wine, water, fruit juices, oil etc. outside marbled 4.500 liters UNI-DACH Measurement and Weight: Total Height: 2900 mm Cyl. Height: 2000 mm Diameter: 1750 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: - with manhole round DN 500 with hanger - with 2 cran eyes - with thread connection 2 x DN 25 and 1 x DN 65 - with CIP spray head Cylinder tank: - ladder hook - with sample valve - with level indicator with bar and scale - with temperature indicator analog - with thread connection DN 80 Lower bottom: - with conical bottom - with forward pulled outlet pipe with butterfly valve DN 50 - with 4 calotte feet height adjustable

Vemag Robot 500 vacuum filling machine / dough portioner, double screw System, for filling, portioning, linking, microcomputer control, filling capacity up to 2,500 kg/h You are very welcome to test the machine in our facility in Koblenz, Germany.

S5 - used 50 m³ / 50,000 litre steel tank, underground tank, firefighting water tank, water Container, water tank. In good condition, as underground tank or for aboveground use, steel tank, storage tank, water tank, firefighting water tank. Exterior with a new coat of bitumen. volume: 50 m³ / 50,000 litres material: stainless steel tank, single-walled dimensions: appr. 2.5 m diameter x 10.0 m length weight: appr. 8.0-10.0 t The container is used, emptied inside and has been professionally cleaned. According to the age traces of use are present. The container could be used as storage tank for water, waste water, sewage, liquid manure, seeping juice, canola oil, rain collection tank, water cistern, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update a ...

RECON Part number: 1218 3781 (6.501.0.160.005.4) Groove 1 + 2 = 1 mm ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us