rs 50 used for sale

Transnorm conveyor belt GF 1050-600-500 RA2475 Technical data: Conveyor length (NL): 1050 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1050 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 scope of delivery ...

Transnorm conveyor belt GF 950-600-500 RA2474 Technical data: Conveyor length (NL): 950 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 950 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,37/S1 scope of delivery: without supports and side guides Für eine individuel ...

Transnorm conveyor belt GF 1020-600-500 RA2473 Technical data: Conveyor length (NL): 1020 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1020 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,37/S1 scope of delivery: without supports and side guides Für eine individ ...

working area: 3000 x 1500 mm : 5000 W : 25 mm sheet thickness for stainless steel: 20 mm Sheet thickness aluminum: 12 mm machine weight ab.: 12.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 1900 kg

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2007, Control: PC 85, Software: Woodwop, Barcode: Ja, Online connection: möglich, Operating system: Windows, Work piece width min-max mm: 70-1000(1300), Work piece length min-max mm: 200-2500, Work piece thickness min-max mm: 8-80, Working range X: 2500, Working range Y-axis: 1000, Working range Z: 80, Beschickungsband: 32, Vertical drilling station from below: 32, Drill support from top: 2, Drilling heads overall: no, Tool changer: 2, Drill vertical Y: 32, Horizontal drills-X: 32, Drill horizontal Y: 8, Zwischentransport: 2, Lock case moulding aggregate: 2 , Number of spindles: 2x2,7, Year :2007

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008

Manufacturer: Morbidelli, Type: 503, Year: 1998, Control: Tria 7000, Feeding speed max m/min: 75, Working range X: 3200, Working range Y-axis: 1050, Working range Z: 80, C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, rpm 1): 18000, Number of tool changers: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: 4, Vacuum pumps m³/h: 120, Tool clamping system: ISO 30, Saw unit: Starr in X Richtung, Radial arm machine: yes, Year :1998

Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 272 mm -Table surface: 1555 x 300 mm -Table thickness: 18 mm -Dimensions: 1555/500/H272 mm -Weight: 190 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 3 pieces -Tire size: 250/50-10 SC 10 RIM 6.50F -Rim: Mefro 41042 106 6.50F-10 ET 25 -Bolt circle: Ø 150 x 19 mm -Hub bore: Ø 110 mm -Delivery/Price: complete -Dimensions: Ø 450 x 210 mm -Weight: 35 kg/pc.

Manufacturer: Bizerba Type: VARIC SA 400/500/300 Nominal Voltage: 230/115 VAC Nominal Current: 0.7/1.4 A Frequency: 50/60 Hz Certification: CE Find more here - / Contact us at -

Sheet metal plastering machine Jeros 5015/828 for 2-edge trays Stainless steel version with lubrication Connection 400V, 16A-CEE plug Used machine

Inv. Num. : 9052 Type: OmniMat L 5000 Producer: Messer Created: 2012 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 80 mm Maximum sheet thickness when cutting (stainless steel): 45 mm Maximum sheet thickness when cutting (aluminium): 40 mm Maximum thickness of cut sheet (carbon steel): 50mm Plasma source: HPR 400 XD Machine weight: 2250 kg

Key data: 500 mm, 1000 mm, 2500 1/min

Lathe Voest Alpine Steinel WNC 500 S x 1000 Turning diameter 500 mm Turning length: 1000 mm Control system Sinumerik 810 T-GA 2 2 stage gearbox i = 4 Power: 37 KW at 100% ED Max. torque during turning: 1450 Nm Tailstock manual with clamping and coupling Speed max 2500 rpm Electronic handwheel For milling: Hydraulically swivelling servo motor with 720 Nm and max. 18.5 rpm 12-speed disc turret with driven tools max. 3000 rpm at 4 kw Tool holder VDI 40 Many VDI 40 tool holders for internal and external machining as well as driven tools, incl. some tools - e.g. internal turning steels otherwise without tools!

Technical data Press force approx. 3200 k Bending length approx. 4420 mm TASC 6000 control system Projection 420 mm Free stand passage approx. 3680 mm Usable installation height approx. 615 mm Weight machine approx. 23400 kg Facilities - Stable machine frame press beam, stress-relieved annealed with high bending strength - Spherical bearing of the press beam (inclined position)- Electro-hydraulic upper drive with 4-cylinder technology - Optical set-up and positioning aid - Generous edge clearance - Flat Front Cover Narrow Block Hydraulic Electronic Pressure Compensator - Measuring system with glass scale and suspension compensation - Hydraulic oil in the machine (lifetime lubrication)- Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Extended equipment - 6-axis backgauge system - Hydraulic upper tool clamping - CNC crown ...

The Brewiks 500 is a two-vessel microbrewery system operating on a plug-and-brew principle. It consists of a mash tun and a lauter tun, both on wheels, which together function as mash tun, filter tun, boiler, and whirlpool. Average output is up to 580 litres of high gravity wort per 6-hour brew cycle. Construction and Certification - The system is manufactured from quality stainless steel AISI 304/316 and carries a CE certificate. - Both vessels are stone wool insulated and mounted on stands with wheels for easy repositioning. Mash Tun - Included Equipment - 7-inch touchscreen controller - Electrical installation with 40 kW electrical heaters - Hygienic pump - Water heating system - Heat exchanger for heating sparging water - Pipe heat exchanger with hot water recuperation - Stone wool insulation - Valves and fittings - Stand on wheels - Condensing lid with silicon seal and drain tu ...

Glass chromatography column BPG., Inner diameter (mm): 200, Total volume (L): 16, Lower tapping: 1, Top tapping: 2, Bottom stitching: 1, Lower stitching: 1, Top stitching: 2, Top nozzle: 2

An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible.

A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.

Technical data of the pallet rack stand: Shelving system: META (Thyssen) Type: Multipal S The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 7,000 mm Depth: 500 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Used engine few hours Very good condition !

Top maintained MAHO MH 500 M Immediately available from location without accessories shown x-travel 500 mm y-travel 380 mm z-travel 350 mm Control Maho 134 Main spindle: Speed range - main spindle 63 - 4,000 rpm/-1 Drive power - main spindle 3 kW Gear stages 2 Tool holder SK 40 Quill stroke 50 mm You can swivel it. h/v Work table: Table clamping area 800 x 360 mm T-slots 14H7 - 5 / 63 max. table load 200 kg Feeds: Feed speed 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ) 4 / 2 / 4 m/min Total power requirement 5 kW Machine weight approx. 1.6 t

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm control: Heidenhain total power requirement: kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 170 kg,

Net weight= 170 kg,

x-travel: 1.020 mm y-travel: 510 mm z-travel: 510 mm control: MSC 501 Fanuc table surface area: (APC) 1.200 x 480 mm max. table load: (APC) 550 kg Main spindle:: turning speed range - milling: 10.000 U/min power capacity - milling spindle: 22 / 18,5 kW tool taper: BT 40 Tool-Presetter:: number of toolpositions: 30 pos. tool taper: BT 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8 kg rapid traverse: 32 m/min feed: 1 ~ 16.000 mm/min Tipp feed: 0 ~ 1.260 mm/min spindle bearing diameter: 85 mm total power requirement: 59,5 kVA weight of the machine ca.: 6,9 t dimensions of the machine ca.: 3,9 x 2,7 x 2,9 m Documents: Chip conveyor: 2x Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: pallet changer: 2 pos. CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT  ...

Net weight= 404 kg,

Model: 7920.5020 Year: 2022 Condition: Used Serial Number: 6815 1423 2204 0108 Stock Number: 3337 Content 1300 litres Description: Stainless steel freezer with double door and lock Refrigerant: R290 Temperature range: -18 °C to -22 °C Power:230VAC, 50Hz, 780W Dimensions: 830 x 1480 x 2050 mm Weight: 201 kg

Model: 7920.5020 Year: 2022 Condition: Used Serial Number: 751004716 Stock Number: 3336 Content 1300 litres Stainless steel freezer with double door and lock Refrigerant: R290 Temperature range: -18 °C to -22 °C Power: 230VAC, 50Hz, 780W Dimensions: 830 x 1480 x 2050 mm Weight: 201 kg

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

CNC Deep Hole Drilling Machine Shinil (Korea) Year: 2009 Control: Fanuc Oi-TD Key Technical Specifications • Drilling diameter (solid): Ø 50 – 200 mm • Counter boring max: 500 mm • Trepanning max: 500 mm • Max drilling depth: 6000 mm (6 meters) Workpiece & Motion • Z-axis stroke (tool free): 6000 mm • Work spindle stroke (max): 4000 mm • Z-axis rapid feed: 5000 mm/min • Z-axis cutting feed: 0 – 1000 mm/min • Control axis: Z-axis CNC controlled Spindle & Speed Range • Headstock rotation: 5 – 30 rpm • Tool holder spindle speeds: • 50 – 500 rpm • 25 – 250 rpm • 16.6 – 166 rpm • 8.3 – 83.3 rpm Cooling & Drives • Coolant pump control: Inverter-driven • Motor control: NC controlled spindle & tool rotation Power & Installation • Total power: approx. 335 kW • Power supply: AC 440V / 60Hz  ...

Sheet metal cleaning machine Jeros 5010-828 Condition: used, in working order, bakery conditionSuitable for trays 58x78cm edges on the short sideWith oiling

Spiral mixer Sinmag KM-50T Condition: used, functional Year of Make: 2011 Suitable for max. 25 kg flour or 50 kg dough Stainless steel boiler and spiral Automatic timer Two timers Two speed settings Digital control Reverse Mobile with brake

Bread slicer Rego Rotec 500 Year of Make: 2012 Condition: cleaned & tested Passage width: 230 mm Passage height: 140 mm Insertion depth: 500 mm Cutting thickness: 3-25 mm Max. number of slices: 145 per min. Dimensions WxDxH: 1127 x 705 x 1090 mm

- Heating coil 250 kW - Voltage: 575 V / 60 Hz More information on request!

Key data: 6000 mm, 1200 mm, 1800 mm

Basic machine data Used 7-axis mill-turn machining center from MATEC Make: MATEC Type: 50HVU Year of Make: 2011 Condition: Mint Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR410 Travels: x-travel: 6000 mm // y-travel: 1200// 1400 mm // z-travel: 1800 mm Technical data: • A-axis: infinitely variable, horizontal / vertical • B-axis: infinitely variable • C-axis: rotary table with rotary function 200 rpm • Spindle: 20-8000 rpm • HSK A-100 interface • 60-fold tool changer • Rigid table: 1235 mm width • Positioned dividing head for shaft machining • IKZ (internal coolant supply) • 2 x chip conveyors • Infrarottprobe The machine is in mint condition. Machine has only 2450 PGM hours Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Dosing unit Gorreri DVG 500 Year of Make: 2011 Condition: functional Suitable for filling, spraying or decorating various types of products from doughs, creams, jams and other liquid products Output: max. 40 strokes per min Compressed air: 250 l/min (6 bar) Dimensions LxWxH: 1200 x 600 x 1850 mm Weight: 80 kg

X-axis: 425mm, Y-axis: 400mm, Z-axis: 240mm, Spindle speed: 42000rpm, Probe: Renishaw, Number of tools: 40, Spindle interface: HSK40, with paper filter. An on-site inspection is possible.

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. Weinig Powermat 500, year of manufacture 2010, window version ------------------------------------------------------- technical details short summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: -------------------------------------------------------- - Existing planing and molding tools by Leitz (price on request!) - Maweg Saturn Duo single-slot wood sander, manufactur ...

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches

Description Euroloch – Punching tool suitable for Renz Super 500

Description Calendar or ring binder Punching tool 2 pieces, round hole 4mm, pitch 3:1 with thumb hole suitable for Renz Super 500

Description Palamides Stacking Delivery Alpha 500 Year 10-2011 for mark-free laying Stahlfolder Interface Output Table

Description Compressor Worthington Rollair RLR 750 BM 6 500 T with Hankison refrigeration air dryer with approx. 28,000 operating hours Fully automatic, internally completely piped and wired compact system, single-stage oil-injected compression, air-cooled, soundproofed Operating pressure 10 bar Volume flow 40 m3/hour Output 5.5 KW Boiler 500 litres ROLLAIR_550_2000_EN

General SKU050C545 MakeBHS Sonthofen GmbH TypeAutopress AP-500/14/20/VA No.F-00946-305-01 ATEX Year of construction2005 LocationBarneveld Specified Features - Filterpress Material finishMirror polished inside Pressure Working pressure12 Bar Main Features MaterialStainless steel Pressure12 Bar Surface4.7 m2 Filterpresses Filter pressGas-tight, fully automatic filter press(1x) Filter surface4,76 m2 Stainless steel plates(1.4404) Number of platens14, dia. 510mm Cake capacity52 l, Max. Temp. -30/+200 Degr. C. Hydraulic closingcheck With hydraulic unitcheck Motor4,0 KW, 400/690 Volt (Ex) Automatic openingWith hydraulically operated scraper MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) Information Floorspace3,6 x 1,5 m Total height3,7 m Weight4000 kg CEcheck ATEX compatiblecheck Extra SpecificationsBHS Autopress filters are discontinuous, fully  ...

REALUX BK 5000 Trinocular Microscope - 5 Objectives New equipment in its original packaging Model: BK 5000 Trino Trinocular head Eyepieces: WF 10X-20 mm Eye diameter: 23.2 mm XY plate: Size 175 x 145 mm, Displacement 78x55 mm - Object guide for 2 blades 3W LED lighting 5 infinitely corrected plan-achromatic IOS lenses: IOS PL ACH 4×/0.10 W.D. = 12.10 mm IOS PL ACH 10×/0.25 W.D. = 4.64 mm IOS PL ACH 20×/0.40 W.D. = 2.41 mm IOS PL ACH 40×/0.66 W.D. = 0.65 mm IOS PL ACH 100×/1.25 (oil) W.D. = 0.12 mm