rs 50 used for sale

A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless  ...

Transnorm Rising falling Incline with arch and forerun belt conveyor 1000+10700+1000-600-500 RA2459 Technical data: Conveyor length (NL): 12700 mm (1000 mm forerun + 10700 mm incline + 1000 mm arch ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12700 ( 1000 + 10700 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...

Key data: 3915 KW, 6000 V

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wärtsilä at the end of 2010 and commissioned in 2011 as a turnkey project, equipped with a heat recovery system for 10 bar steam production. The plant operates on standard natural gas supplied via a local pipeline. It was in operation until 2021, accumulating a total of 43,767 running hours before being shut down. The complete installation includes a step-up transformer, lube oil system, control panels, synchronizer panel, UPS systems, operator monitors, MCC, start-up system, air compressors, HRCS for 10 bar steam, exhaust system, 6 kV vacuum breaker with synchronization, as well as all manuals and technical drawings. The plant remains installed, with electrical power still connected to all devices. All scheduled maintenance was performed by Wärtsilä Service, with the last maj ...

CNC Ball Valve Grinding Machine Saporiti PV 500 Year of construction 2014 Siemens Sinumerik 840D Ball/sphere diameter: max. 500 mm Travels: X-axis 510 mm Z-axis 950 mm Y-axis +/- 1.5 mm Workpiece diameter x length: max. Ø 600 x 1,100 mm Workpiece weight: max. 1,000 kg Headstock speed: max. 200 rpm. Grinding wheels speed: max. 6,000 rpm. Water filter: 2,000 l Machine dimensions: L x W x H 3,300 x 2,500 x 3,000 mm Required footprint: L x W x H 7,700 x 6,000 x 3,100 mm Machine weight: approx. 15,000 kg Accessories: RENISHAW measuring system with Saporiti-specific software for easy centering of the tool to the ball A Saporiti PV-1000 from 2014 is also available. Condition: Is said to be excellent Offer number V-7140

A horizontal flow pack packaging machine (tubular bag machine) SKS is available. Packaging capacity: 30-120 packages/min, film roll width: 220mm-500mm, bag length range: 120mm-500mm, bag width range: 60mm-200mm, bag height range: 5mm-80mm. Machine dimensions X/Y/Z: approx. 4500mm/1150mm/1600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.

CORE GAS TURBINE SAMC POD FOR TRANSPORT INCLUDED

Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks:, What is a Temperature-Controlled Processing Tank?, A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle., Key Features, - Heating and Cooling Systems:, - Heaters: Can be electric or steam-based to raise the temperature of the contents., - Chillers: Usually water or glycol-based cooling systems to lower the temperature., - Insulation:  ...

Electrical Supply: 400V 50Hz 3N Main Material Stainless Steel, Acid Resistant Description: A line consisting of: Freezer tunnel TVI CBF 1000. SCHIESSL tunnel feed unit with Bitzer compressor. TVI GMS 500 slicer.

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 500, Control panel: Stainless steel Control box, Controls, Thermomete ...

Inv. Num. : 6136 Type: CTX alpha 500 Producer: DMG Gildemeister Created: 2008 Parameters: Control system: Siemens 840 Switch-on hours: 22803 h Hours: 11505 h Maximum turning length: 500 mm Maximum turning diameter: 200 mm Maximum turning diameter over bed: 500 mm Distance between tips: 780 mm Maximum spindle speed: 6000 1/min Maximum workpiece weight: 45 kg Weight: 4500 kg Equipment: Filtration Bar Feeder CNC Spacesaver SS 2500 (2018)

Demonstration machineThe new 50F briquetting press from Holzprofi impresses with its sophisticated, simple and solid construction.The press is designed for trade and industry.Made in EU ! Technical data:Total engine output power 7.0 kW S6 (5.5 kW S1)Briquette diameter 50 mmPower consumption approx. 3800 W/h Capacity 40 - 60 kg/h Chip bunker 0.33 m³Weight 390 kgWeight briquettes approx. 900 Kg/m³Sound pressure level less than 70 dBAdimensions: 1860 x 890 x 1100 mm

Overbeck Rising falling Incline belt conveyor with overdrive vorrun GF 800+5260-600-500 RA2461 Technical data: Conveyor length (NL): 6060 mm ( 800 mm vorrun + 5260 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 120 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0.5 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6060 ( 800+5260 ) Nominal / outside wi ...

Overbeck Rising falling Incline belt conveyor with arch GF 600+5460-600-500 RA2460 Technical data: Conveyor length (NL): 6060 mm ( 600 mm arch + 5460 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 120 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0.5 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6060 ( 600 + 5460 ) Nominal / outside width in mm: 6 ...

Bibby 5000L Holding tank 316 Stainless, 5000L holding tank, central bottom discharge with level sensor

Dematic roller curve left 90°-500-440 IR795 RA2351 Make: Dematic Running direction: 90° left running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: 0.6 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and imp ...

Key data: 260 mm, 500 mm

Turning-milling centre Manufacturer: Mori Seiki Type NL1500SY/500 Year of construction 2007 In operation 03/2008 Control MSX-850-III Y and C axis All 12 turret stations are powered Max. turning length 500mm max. turning diameter 260mm Spindle Passage 50mm Speed of the driven tools 6,000 rpm Feeds X Z B 30,000 Y 10,000 with LNS rod loading magazine, length 1000mm, max D 65mm reducer sleeves. Machine is sold with all accessories, steel holders, AGWs (all still very good) collets, chuck, pick-up chuck, documentation, extraction system. Machine only ran in single-shift operation.

Pharmatec 500-S4 Multistage pressure column distillation unit Stainless, designed for the production of sterile, non-pyrogenic water for injection (WFI), all mounted on skid, four column system, 660 l/h pressurized heating steam, 4Bar, adjustable controls, 3Ph

Dematic roller curve right 90°-500-440 IR795 RA2462 Make: Dematic Running direction: 90° right running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: 0.6 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and i ...

Used Sealing Edge Machine Poly-Bagging PP, Type: 500 BM - Automatic feeding and sealing of films - Packaging of various products, especially for shipping, storage or retail packaging - The machine is designed for durability and functionality in production environments Visits and test runs are possible by arrangement.

General SKU225U167 MakeTerlet No.80 645 Year of construction1980 Mounted on legscheck Pressure Working pressure0 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume500 Ltr. Motor2.2 KW Specified Features - Stirring vessel MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 Open stirring vesselcheck Capacity500 Ltr. Vessel sizesdia. 980x900 mm Dished top sidecheck With covercheck Manholedia. 980 mm Outletdia. 47 mm With jacket27 Ltr. Max. temperature143 °C With gate type stirrercheck With paddle stirrercheck Motor1,5/2,2 kW 380 Volt Information LocationBarneveld Floorspace1,35x1,7 m Total height2,4 m Weight830 kgStirring vesselsTerletStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destina ...

50 HL Brewhouse Manufactured by fabdec in 2013 Gas Fired brew house consisting of Mash tun/kettle/hot liquor tank/underback/heat exchanger/wort pump/swing bend plate /work platform/gas burner and associated pipework and fittings This is a SECOND HAND brewhouse and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk For more information and more available stock please visit us at - advancedbrewing.co.uk

Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible.

General SKU422U1436 LocationBarneveld MakeSiebtechnik TypePerflux 501 Main Features MaterialStainless steel Surface0.75 m2 Sizes diameter500 mm Specified Features - Vibro sieve MaterialStainless steel 1.4301 (304) Vibro sievecheck Sieve surface0,75m² Number of sieve decks:1 Sieve sizesDia. 500 mm InletDia. 500 mm OutletDia. 500 mm Drive vibro motorcheck Motor0,16kW, 400Volt Sieve perforation3,15mm With extra sieve decks3,15 mm (2x) Information No.106/26598/0 Year of construction2006 Mounted on stainl. st. framecheck Floor space1x0,6 m Total height0,6 m Weight100 kgVibro sievesSiebtechnikSieves > Vibro sievesBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please  ...

This Mazak Mega Turn 500 was manufactured in 2017. A robust vertical turning machine featuring a Mazatrol Smooth G control unit, it offers a maximum workable diameter of 500 mm and includes a 12-position turret plus a 10-station ATC with Capto C6. Additional features include a high-pressure coolant system at 15 bar and an automatic tool presetter. Contact us for more information about this machine.

This WAGNER WDE 500 was manufactured in 2007. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this WAGNER WDE 500 horizontal turning machine. Contact us for more information.

This 3-axis MORI SEIKI NL 2000 SY/500 was manufactured in 2005. A horizontal turning machine featuring a BF interface and live tools, it also includes a tool setter on both spindles. If you are looking to get high quality turning and milling capabilities consider the MORI SEIKI NL 2000 SY/500 machine we have for sale. Contact us for more information.

This Leadwell LCH-500 Horizontal Machine Center was built in the year 2006. It is equipped with a Fanuc Series 0i-MC control unit and has 3 axis. The machine has a spindle speed of 10000 rpm and is in good condition.

This BIGLIA B 501 MB (1997) Lathe machine was manufactured in 1997. This machine has a tank capacity of 200 liters and a pump flow rate of 100 liters per minute, driven by a pump motor with 0.5 kW power. Regarding its axis specifications, the x-axis has a travel distance of 210+5 mm and moves at a speed of 20 meters per minute, while the z-axis travels a distance of 500+10 mm at the same speed. Contact us anytime for further information.

This Grecon Dimter FDL-F 205/600/500 was manufactured in 1997. It is designed for woodworking applications, offering robust performance and reliability. Ideal for handling a variety of wood processing tasks efficiently. Contact us for more information about this machine.

This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for sale.Contact us for more information.

This 3-axis DMG MORI CTX Alpha 500 V6 was manufactured in 2021. A versatile turn-mill centre featuring a Siemens 840D controller, ERGOline interface, and CELOS manufacturing support. It offers a 470 mm machining length, 6000 rpm max speed, and a 12-position Sauter turret with live tooling. Ideal for complex machining tasks. Contact us for more information about this machine.

This DN SOLUTIONS NHP 5000 Horizontal Machining center was manufactured in the year 2021. It is equipped with a FANUC 31I-MODEL B control unit and has 4 axis. The machine has a spindle speed of 15000 rpm.

This 4-axis Yida MH-500 horizontal machining center was manufactured in 2009. It features a spindle speed of up to 10,000 rpm, a pallet size of 500 × 500 mm, and a tool magazine with a 40-tool capacity. Ideal for high-precision machining with its LM linear guideways and rapid traverse rates. If you are looking to get high-quality milling capabilities, consider the Yida MH-500 machine we have for sale. Contact us for more information about this machine.

This 4-axis KAFO HMC-500 was manufactured in 2019 and features a robust FANUC 0i-F control unit. With a spindle speed of up to 10,000 rpm and a tool magazine capacity of 40 tools, it ensures efficient machining. The machine has a pallet size of 500x500 mm and a maximum workpiece size of Ø700 mm by 800 mm. Consider the opportunity to buy this KAFO HMC-500 horizontal machining centre. Contact us for more information about this machine.

This TONGTAI HA-500II Horizontal Machining center was manufactured in the year 2016 in Taiwan. It is equipped with a Fanuc control unit and has 4 axis. The machine has a spindle speed of 12000 rpm.

Manufacturer: Trumpf Model:TC 500 Machine type: Punching machine Find more here - / Contact us at -

Transnorm Rising falling Incline belt conveyor with arch GF 2900-8100-600-500 RA2464 Technical data: Conveyor length (NL): 11000 mm ( 2900 mm arch + 8100 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 11000 ( 2900 + 8100 ) Nominal / outside width in mm: 600 Belt width in ...

This 5-axis Mazak VARIAXIS J-500 was manufactured in 2017. It features a Mazatrol Matrix Nexus 2 control, a Φ500 mm × 400 mm table, and can handle a maximum load of 200 kg. The spindle supports a BT40 tool shank and reaches up to 12,000 rpm. Dimensions are 2,565 mm × 3,225 mm × 2,840 mm, and it includes a chip conveyor and through-spindle coolant. Consider the opportunity to buy this Mazak VARIAXIS J-500 vertical machining centre. Contact us for more information.

This 5-axis Mazak Variaxis 500-5X II was manufactured in 2007. Ideal for complex and precise machining tasks, this vertical machining center offers versatility and reliability. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis 500-5X II machine we have for sale. Contact us for more information.

Transnorm conveyor belt GF 14000-600-500 RA2463 Technical data: Conveyor length (NL): 14000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller 1: Ø = 81 mm Belt return roller 2: Ø = 40 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 14000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor spe ...

This 3-axis MORI SEIKI CV-500 was manufactured in 1999. Ideal for precision CNC milling, this machine maintains robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI CV-500 machine we have for sale. Contact us for more information.

greates pass round over bed: 1050 mm dist. between centers: 6000 mm centre height: 520 mm turning length: 4810 mm workpiece weight max. (main spindle): 6000 kg Maximum workpiece weight with steady rests: 8000 kg max. torque on the spindle: 12500 Nm number of spindle speeds: 2,8-560 1/min Speed range 24 levels: feed per revolution: 0,08-56 mm chuck diameter: 630 mm Maximum travel distance of the longitudinal slide: 4810 mm Maximum travel distance of the cross slide (suppor: 530 mm Maximum travel distance of the tool slide (support: 340 mm Tailstock quill diameter: 150 mm total power requirement: 31 kVA weight of the machine ca.: 10500 kg dimensions of the machine ca.: 7860 x 1970 x 1480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Mazak NEXUS 5000 II was manufactured in 2007. It features a table size of 500 x 500 mm, capable of handling weights up to 500 kg. Equipped with a high-speed spindle at 18,000 rpm and a spindle motor power of 18.5 kW, it ensures efficient machining. Includes a 40-position tool changer and Mazatrol Matrix control for enhanced precision. Contact us for more information about this machine.

- Brand: SILMISA - Model No.: MSIT-500/2 - With cutting chamber: 720 x 540 - Open rotor - Engine: 50 hp (37 KW) - With electrical panel

This 5-axis Mazak Variaxis i-500 was manufactured in 2019, featuring a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 tools. It supports workpieces up to Ø500 mm by 350 mm and has a table load capacity of 300 kg. Consider the opportunity to buy this Mazak Variaxis i-500 universal machining centre. Contact us for more information about this machine.

This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information.

This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 × 2700 × 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine.

This 5-axis POSmill H 500 U was manufactured in 2018, featuring a vertical machining center with X-620, Y-820, Z-650 travel dimensions, and a 60-space workshop. It includes internal coolant supply plus air cooling and is equipped with a Heidenhain iTNC-530 control for five-axis simultaneous milling. If you are looking to get high-quality milling capabilities consider the POSmill H 500 U machine we have for sale. Contact us for more information about this machine.

This 5-axis ESPE LAVA CNC 500 was manufactured in 2008, designed for advanced dental technology. It features a standard disc diameter of 98mm, operates within a temperature range of 18 – 25°C, and maintains a sound level of 65 dB (A). Ideal for businesses aiming to enhance automation and productivity in milling operations. Contact us for more information about this machine.

Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125  ...