rs 50 used for sale

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

FAS conveyor roller curve 90° 635-500 IR850 RA1990 Technical data: Condition: good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB): 635 mm roller width (NUB): 500 mm Pitch: 75-125 mm Motor Type: SEW three-phase motor Engine power: kW 0.15 S1 Hz 50 Funding speed: 0.93 m/sec Drive: Center drive usable width: 500mm The rolls are higher than the frame Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Wuerzburg Features: nominal voltage: 380-500V Running direction: links/ rechts condition: good (used) Nominal / inner radius in mm: 850 Nominal / outside width in mm: 635 Roll width in mm: 500 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,15 Conveyor speed m / s: 0,93 scope of delivery: without supports and side guides Für eine  ...

Transnorm conveyor belt GF 15000-600-500 RA2067 Technical data: Conveyor length (NL): 15000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 15000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...

Transnorm conveyor belt GF 12330-600-500 RA2072 Technical data: Conveyor length (NL): 12330 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor R27 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 12330 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0 ...

Transnorm Rising falling Incline belt conveyor with arch GF 580+1990-600-500 RA2430 Technical data: Conveyor length (NL): 2570 mm ( 580 mm arch + 1990 mm riser segment ) frame width (NB): 600 mm, 750 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 1.6 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 2570 (580+1990) Nominal / outside width in mm: 600 B ...

Transnorm Rising falling Incline with arch belt conveyor GF 4500+700-600-500 RA2195 Technical data: Conveyor length (NL): 5300 mm ( 4600 mm incline + 700 mm arch ) frame width (NB): 600 mm belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 5300 ( 4600 + 700 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...

Transnorm Roller Curve Conveyor 45° links 565-500 IR 750 RA1283 The Transnorm roller curve is from 2004 and in a good (used) condition. It has a sEW mid-engine with brake. Supports are included in the scope of delivery. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 45° left Built: 2004 Condition: good (used) Engine: fully functional Angle: 45° Inner radius (IR): 750 mm Nominal/outer width (NB):565 mm Belt width (GB): 500 mm Engine Type: SEW Gear motor with brake Engine Power: kW 0.37/0.37/S1 Hz 50 A 2.15/1.24 Drive: Center drive Funding speed: 30 m/min Weight: 84 kg Scope of delivery: incl. 2 supports (height adjustable) Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Features: Für eine individuelle, fachmännische Be ...

Inv. Num. : 5955 Type: Trumatic 500 R Producer: Trumpf Created: 2003 Parameters: Control system: TRUMAGRAPH CC 220 S Switch-on hours: 29433 h Compressive force: 22 t Machine height: 2200 mm Machine length: 6900 mm Machine width: 5800 mm Machine weight: 11000 kg 2020: Replacement of hydraulic hoses

SSI Schaefer PR600 – 30.90 m | Height 7.50 m | Floor + 4 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racking for Euro pallets. The proven PR600 design offers high payloads, flexible configurations and reliable performance in daily operations. Buying used means: tested brand quality at an attractive price – immediately available from stock for new construction, conversion or expansion of your shelving system. Individually adaptable: The shelf frames (frame type P100 / P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requirement.  ...

Width 50 cm Year of manufacture 1997 Flexible sword folding unit Self-control Mobile substructure Delivery date: short-term Price on request. We supply and install worldwide.

Key data: 500 mm, 45 °

The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.

Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.

OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...

Height=2 m, Overall length= 1.05 m, Overall width= 4.76 m, Net weight= 750 kg,

Height=0.45 m, Overall length= 0.5 m, Overall width= 0.7 m,

Height=0.61 m, Overall length= 0.5 m, Overall width= 0.87 m, Net weight= 158 kg,

Height=1.35 m, Overall length= 1.05 m, Overall width= 1.6 m, Net weight= 630 kg,

Key data: 3050 mm, 6 mm

3000 x 6mm Elgo P50 Rear sheet supports

Key data: 800 mm

Technical details are on picture. Parts shown by hand not come.

plate width: 2503 mm plate thickness: 4.0 mm ST plate thickness: 2.5 mm VA plate thickness: 6.0 mm ALU number of strokes - loaded: 15 - 20 Hübe/min cutting angle: 1.7 ° work height max.: 900 mm Control: ELGO TYP 85 total power requirement: 8.5 kW weight of the machine ca.: 3400 kg range L-W-H: 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: 500 mm Equipments: 2 parallel fold 1 cross fold sheet width: max: 500mm, min: 105mm, cross folding: max: 500mm, min: 182mm, perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min. 174mm. Speed max. 180 m/min., suction head w ith a rotary feeder

carrying capacity: 500 kg. number of suction cups: 6 Stück suction cup dia.: 215 mm 0: 8,0 m³/h tool adaptor: Kranöse 80,0 mm voltage: 400 V total power requirement: 0,18 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the cente ...

weight max. in kg: 500 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4215 mm swivelling range: 270 Grad Total weight, approx.: 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size L ...

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 70.0 t punching cross-cut in cmm: 27 in 20 mm punching cross-cut in cmm: 32 in 14 mm work height max.: 1060 mm column arm: 500 mm weight of the machine ca.: 1500 kg. total power requirement: 7.0 kW range L-W-H: 1550 x 1200 x 1950 mm good / well-maintained condition () New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 24000 kg length: 5000 mm width: 2500 mm loading area height: 700 mm Heavy-duty trailer - industrial trailer - Made in Germany - Available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø425mm, total width 300mm and ball bearings. The data for this ad was crea ...

The VOGEL YS501X ECONOMIC carton sealing machine is our recommendation especially for rather large carton formats that are glued in series Carton formats: Length 150 – ∞ mm Width 150 – 500 mm Height: 140 – 560 mm Specifications: Operating voltage 220 V CE marking Accessories: In addition to our VOGEL carton seamer range, we offer rollers, feed and trailing tables, as well as roller conveyors. Our YS501X ECONOMIC carton sealer is a cost-effective solution when it comes to securely sealing cartons in rather large formats. Two side conveyor belts ensure that your cartons are safely transported through the carton sealer. The carton width is adjusted mechanically via a crank. The height adjustment is particularly easy and quick to solve on this machine, because the upper gluing unit only has to be unlocked and can then be easily brought to the respective height. Due  ...

Müro 5000/A4 TM block size press; cleaned and tested; insertion width 350mm; Insertion height 520mm; Stack increase for small stacks. Padding press Müro 5000/A4 TM; cleanded and checked; width 350mm; hight 520mm; pile elevation.

PUC Process Plant VLT 500 A The Probst & Class VLT 500 A is a process plant that is primarily used for homogenization, mixing and comminution in process engineering. Typical applications are the production and processing of products where a very fine and uniform distribution of all components is required, such as in the food, chemical, cosmetics and especially in the lubricating grease industry. Function and properties The VLT 500 A works according to the rotor-stator principle and is capable of being used in both batch and inline operation. Other features include high throughput, flexible adaptation options depending on the processing step and product, and the possibility of setting up complete process lines with different modules (e.g. venting, filtration, pumps). Advantages and special features Very fine homogenization and comminution, even with demanding mixtures. Flexible ...

For sale: Plotters, inkjet printers, in need of repair Manufacturer: HP Type: Designjet 500 Print size: A1 Areas of use: CAD plans, posters, architect plans, pictures, etc. Condition: in need of repair, Error code: 21:11 Fixed price: 250 Euro Extras: 15x paper rolls A1 /HP/Rauch. Price 150 euros extra!

Transnorm belt conveyor 800-600-500 RA2041 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 545 mm Motor type: SEW motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,02 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: Supports Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Co ...

Manufacturer: TRUMPF Model: TruLaser 5030 Classic Year of Manufacture: 2007 Laser Power: 5000 W Operating hours: 55,874 h (of which only 23,565 h were used for cutting) Operation mode: exclusively single-shift operation Maintenance: carried out regularly and exclusively by Trumpf Equipment: includes 2 interchangeable pallets Electrical Specs: - Supply: 400 V / 50 Hz - Connection Load: 105 kVA - Control Voltage: 24 V - Required Fuse Protection: 3 × 160 A Gas Supply Requirements: - Compressed Air: 7–10 bar - Nitrogen (N₂): 30 bar - Oxygen (O₂): 20 bar Find more here - / Contact us at -

Leopard 1 engine MTU Mercedes Model: MB 838 Ca-500 Power: 830 hp 10-cylinder multi-fuel engine with approx. 38 litres displacement Speed: 2200 Weight dry: 1930 kg Bore stroke mm: 165/175 Displacement/cylinder: 3.74 l Cylinder displacement: 10 V / 37.4 l

- Fixed steady rest 4 units - Fixed table dresser for stone dressing - Face plate head and rear support ca 800 mm - Stone grinding speed 27-24 M/Sec - Coolant and filtration system - In feed stone 0,0025 mm - Acurite Dro with Heidenhain scales - Maximum segment wheel 1600 mm

- Long stroke CNC Press brake - 8 Axis controlled - ASTRO 50Y AMADA Robot - ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. - When machining medium / fine thick and large dimension parts. - Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. - Programming has become particularly easy through EASY CAM software - Safety CE Fence around machine and tobot

- Spindle speed 10.000 Rpm - Coolant tank with IKZ 20 bar - Chip conveyor

Type of Machine : Coolant System Model: HA 500 / 100 – AF Year of Manufacture: 2015 Flow rate: 500 l/min Medium: Cutting oil Work material: Aluminum Main voltage: 400 V / 50 Hz Control voltage: 24 V DC Total power: 44.1 kW Current consumption: 81.4 A Empty weight: 1,350 kg Find more here - / Contact us at -

Height=1.275 m, Overall length= 0.99 m, Overall width= 0.75 m, Net weight= 1000 kg,

Generator – ABB AMK 500L4A BATH Manufacturer: ABB Rated Power: 2,020 kW Voltage: 690 V Current: 1,522 A Frequency: 50 Hz Power Factor: 1.0 Speed: 1,680 rpm (max 2,450 rpm / 2 min) Protection Class: IP54 Insulation Class: F Weight: 5,010 kg Year: 2005

Presse à injecter ENGEL 180 T Type : VICTORY 500/180 POWER Force de fermeture : 1800 KN - 180 T Année : 2008 Diamètre de la vis : 45 mm Volume d'injection : 318 cm³ Pression d’injection : 2040 bars Épaisseur min/max moule : 300 750 mm Distance entre colonnes : 860 x 830 mm

A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

Stago PB 5010 Age: 2009 4 Spindle Spindle distance 40-250 mm Drilling diameter 2 - 10 mm Drilling depth max. 60 mm Foot pedal automatical Sliding Table

Due to a new requirement in production, a KEYENCE XM-5000 is sold The measuring system was purchased in 11/23 directly from KEYENCE.

A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume flow: 200m³/h. Machine dimensions X/Y/Z: approx. 1400mm/750mm/1100mm, weight: approx. 140kg. Documentation available. An on-site inspection is possible.

Key data: 1500 , 220 , 40

Presse à injecter ENGEL 150 T type ES 500/150HL Année de fabrication : 2001 En bon état de fonctionnement Force de fermeture : 1500 KN / 150 T Diamètre vis : 40 mm Volume injectable : 251 cm3 Pression d’injection : 1300 bars Rapport L/D. : 20 Nombre de zones de chauffe : 4 Ouverture max des plateaux : 950 mm Course d’ouverture : 700 mm Course de l’ejection. : 150 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 820 x 750 mm Dimensions : 5,45 x 1,60 x 2,40 m Poids : 13 000 kg

EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg

The machine is in good technical condition, testing is possible by prior arrangement.

x-travel: 600 mm y-travel: 530 mm z-travel: 510 mm Control: M 730 BM MAPPS IV Main spindle:: max. spindle speed: 10.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 transmission ratio: 1 spindle diameter in front bearing: 80 mm work table:: table surface area: 900 x 600 mm max. table load: 800 kg T-slots: 6x 18 x 100 mm distance spindle /table: 150 - 660 mm Tool-Presetter:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 150 mm max. tool length: 300 mm max. tool weight: 8,0 kg change-time tool to tool: ca. 1,3 sec change-time chip to chip: ca. 3,45 sec feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1 - 30.000 mm/min Tipp feed: 0 - 5.000 : 20 mm/min total power requirement: 30 kVA weight of the machine ca.: 6,0 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Documents: Chip conveyor:  ...

x-travel: 550 mm y-travel: 400 mm z-travel: 400 mm Control: INGERSOLL ANDRONIC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.