rs 50 used for sale

Tool presettler SOMET type SPS 500 UMash. No. S1-020 Year of construction 1987Table surface 545 x 1000 mmTravel distances X = 500 mm, Y = 340 mmWidth in the portal 550 mmHeight table - lower edge portal 250 mm- Portal longitudinal guidance on the right and left of the table- Adjustment via very fine threaded spindles with handwheel- Quick adjustment via electric unlocking- Projector screen 150 mm with crosshairs and coordinates MEOPTA PMP100- 2 pieces of clamping devices for tool measurement- on substructure with shelf and drawerSpace requirement L

Rotary indexing table, rotary indexing table with 16 stationsRotary transfer machine + hydraulic press TOXRundtaktautomat Special machine with several assembly stationsProduction and assembly system in rotary transfer processFrom special machine manufacturer AKE-technologies GmbHSerien number: 01-45-064Order number: 11111Year of construction: 2012- large rotary indexing table WHITE type TC500, with 16 stations- pressing station with TOX powerhouse- vibation conveyor- conveyor belts- test stations - some stations still open

Measuring and marking plate cast steel-grey cast iron heavily ribbed STIEFELMAYER comes from a measuring machine with a hand-held measuring armhigh-precision measuring plate with a good surfaceMasch. No. 8530979 Year of construction approx. 1989Length 5000 mmWidth 2000 mmThickness 350 mmWorking height 690 mmPanel thickness 50 mm throughout- 15 height-adjustable feet- very precise and stable longitudinal guides, screwed to the side of the plateSpace requirement L x W x H 5000 x 2120 x 400 mmWeight approx. 7500 kggood surface; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 10-500-K-V3 F6Fabr. No.: 61077868 Year of construction: 1999Load capacity 1000 kgHook travel 6.5 metersMain lifting speed 10 m/min. Fine lifting speed 1.6 m/min.2 load trains = 1000 kgPower supply 400 volts, 50 Hz.- Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, beam width 120 to 280 mm- 2 travel speeds 4.6 m/min and 14 m/min- Cable length of the control bottle 4.5 metersWeight 130 kggood condition; used

CNC Control, Numeric Control, CPU Rackaus OKUMA LB 10OKUMA Typ OPUS 5000 CPU /IF RACK 9ANr.: E7191-292-325-1Baujahr 1985Ser. Item no.: 003184Dimensions W x H x D 390 x 345 x 240 mmThe device is still ready for operation installed in an OKUMA LB 10. Further components from OKUMA can be found under stock number: 60403, 60404, 60405, 60407, 60408, 60409, 60410, 60411; used

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63207040 Year of construction: 1993Load capacity 1000 kgHook travel 2.6 metersDistance suspension to load hook 450 mmHood lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length operating bottle approx. 1.7 metersMains connection 400 volts, 50 Hz.2 load lines = 1000 kg- emergency stopWeight 46 kggood condition; used

Hydraulic guillotine shears FASTI type 509 - 25/4Masch. No. 5418 Year of construction 1991Cutting length 2535 mmCutting thickness 4 mmBack gauge 5-1000 mm (controlled)Cutting angle adjustableHydraulic pressure max. 290 barMotor power 7.5 kWNeching connection 400 volts, 50 Hz- Back gauge with positioning control ELGO ELECTRIC Type 85- Sheet metal holding device under the back gauge- Manual cutting gap adjustment with dial gauge display on the right and left- Stepless cutting length adjustment- Hydraulic

A complete punching system with a grid punch is available. 1) Reel Gebrüder Kemmerich 7VID, year of manufacture: 1981, max. load: 1000kg. 2) Straightening machine, max. material width: 300mm, max. material thickness: 2mm. 3) Feed unit Alba UVHY 300/0.1, feed speed: 6.5m/min, max. material width: 300mm, max. material thickness: 4mm, transport rollers: 2. 4) Punching grid HR 50/600 NL, stroke rate: 300/min, stroke: 30mm-80mm. On-site inspection is possible.

clamping force: 500 kN injection volume: 76,5 cm³ screw diameter: 32 mm platen size: 360 x 335 mm Condition: used, as good as new Specification: Injection moulding machine for LSR - Demonstration machine as good as new clamping unit: - clamping unit: horizontal - Clamping force: 500 kN - Opening stroke max.: 400 mm - Platen distance max.: 650 mm - Mould installation height min.: 250 mm - Clear width between the tie bars: 360 x 335 mm - Ejector stroke max.: 80 mm Injection unit SP 82: - Screw diameter: 32 mm - Screw L/D ratio: 16.3 - Screw stroke max.: 95 mm - Injection volume max.: 76.5 cm³ - Injection pressure: 1076 bar - Plasticising flow: 13 g/s - Injection flow: 204.8 g/s - Connected load: 3x 400 V, 50 Hz - Max. heating power: 5.8 kW - Drive pow ...

Lg.Nr. 25062 Specifications: - with pressure joining pliers ECKOLD, type MZ + hole punching device - Working pressure infinitely adjustable max. up to 500 bar - Compressive force joining pliers 25 Kn - Single cycle or continuous cycle - Cycle rate infinitely adjustable - Hose package unit – pliers approx. 4 m - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

Manufacturer: Polatek Model: TLM 500 V4 Type of Machine : Thermo Laminating Machine Voltage: 3 x 400 V + N + PE Frequency: 50 Hz / 60 Hz Total Power: 8 kW Compressed Air: 6 bar / 250 l/min Find more here - / Contact us at -

Transnorm belt curve conveyor left GKF 90°-700-500-IR750 - NEW with STORAGE MARKS (RUST) RA2418 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 750 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,25 m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2017 Condition: unused, but has marks from storage, as can be seen in the photos Optionally available: Supports Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2017 condition: neu mit Lagerspuren Nominal / inner radius in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Runni ...

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: grey Frame profile: PLFB 16 Profile Dimensions: P 100 x 65 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 8,500 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: grey Frame profile: PLFB 155 Profile dimensions: P 100 x 65 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 8,500 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Manufacturer: Okuma Model: MA-500HA Year of Manufacture: 2004 Find more here - / Contact us at -

Extruder S 50/22D, Doppelkopf 100 Stich. Machine can also be equipped with single or triple head. Good condition

grinding length: 7080 mm grinding width: 500 mm workpiece height: 330 mm Control: Siemens SIMATIC S7 OP17 Passage height: 330 mm grinding spindle data: : grinding wheel diameter: 450 mm grinding wheel width: 100 grinding spindle speed: 6 - 2.100 1/min : 30 kW Feeds: : Longitudinal travel (X-Axis): max. 30 m/min Cross travel (Y-Axis): max. 3 m/min total power requirement: 30 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 8,0 x 2,0 x 3,2 m Equipment and accessories • Basic machine GÖCKEL U9/500 PL, mechanically and electrically refurbished • Siemens S7 control system and OP17 operating screen • Stand-alone electrical cabinet • Integrated handwheel function on the operating screen • Belt filter system with tank capacity approx. 900 l • 1 grinding wheel flange with grinding spindle • 1 pc. Vertical dresser, mounted on machine bed • Documentation  ...

An induction system ITG for heat treatment of workpieces with vertical chain lift system is available. Process: heating/hardening, number of inductors: 2, inductor type: copper coil, cooling: water cooling, connected load: 382kVA, rated current: 552A. Documentation available. An on-site inspection is possible.

NC Lathe Gildemeister Nef 500 BJ 1996

max. wheel diameter: 780 mm gear width: 130 mm max. module: 8 / 10 table diameter: 510 mm table bore diameter: 160 mm number of strokes (double strokes): 30 - 1500 DH/min Control: Siemens Sinumerik 3 distance table - lower edge of ram: 650 mm table-size: 500 mm total power requirement: 36 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,9 x 3,65 x 3,8 m The machine is suitable for: - Internal and external gear teeth in small quantities - Internal gear teeth in blind holes (non-through holes) - External gear teeth without run-out, as hobbing would not be possible Examples of components are: Internal gear rings for planetary gears, drive shafts, clutch hubs... - Siemens Sinumerik 3 CNC control - Chip conveyor Machine was only used sporadically The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dust collector Manufacturer: PharmaFlex Type PF 500 Year of construction 2009 Suitable for tablets/effervescent tablets Dedusting technology: Vibrating ascending spiral Air jet: None Deburring option: None Micro tablets diameter 2.5 mm: 0 Small tablets diameter 5 mm: 3000000 Medium tablets diameter 13 mm: 500000 Effervescent tablets diameter 20 mm: 150000 Small capsules T 4: 750000 T0 Large Capsules: 300000 Inlet Height: 736.0 mm Outlet Height: 1150.0 mm

Manufacturer: WEEKE Model: OPTIMAT BHT 500 Year of Manufacture: 2009 Technical Specifications: - Voltage: 400 V - Frequency: 50/60 Hz - Phases: 3 + N (three-phase with neutral) - Power Consumption: 45 kW - Current Rating: 100 A - Control Voltage: 24 V Find more here - / Contact us at -

A high-voltage motor MENZEL (formerly ASEA) is available. Voltage: 5000V, current: 68.6A, power: 500kW, power factor: 0.77, speed: 591rpm, thermal class: F, protection class: IP54, weight: approx. 4700kg. Documentation available. An on-site inspection is possible.

x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC Heidenhain Speed range - main spindle 20 - 9,000 rpm/-1 Drive power - main spindle 9 / 13 kW Table diameter 700 x 500 mm swivel B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg Number of T-slots 7 Centering bore 30H7 mm Number of tool locations 16 pos. Tool holder ISO 40 DIN 69871 max. tool length 290 mm max. tool weight 6.0 kg max. total weight 50 kg Feed speed max. 10,000 mm/min Total power requirement 17 kW Machine weight approx. 3.2 t Space requirements approx. 4.0 x 4.0 x 2.5 m

A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible.

Transnorm belt conveyor 985-600-500 RA2420 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a SEW gear motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW Gear-drive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 0,8 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: supports We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1999 condition: good  ...

Key data: 4040 mm, 4 mm

Max. cutting length: 4040 mm Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet hold-up Side stop and table extensions Cutting length limitation Cut edge lighting Weight approx. 7500 kg

Transnorm belt conveyor 1905-600-500 -- with new belt RA2422 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a SEW gear motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1905 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: Van der Graaf drum motor TM 113 B25-434 Z Motor power: kW 0.55 230/400 V 50Hz Weight: 60 kg Scope of delivery: including new belt with order Optional: supports Side guide Frequency converter for continuous speed control We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG ...

An explosion-proof high-voltage motor Loher is available. Mounting type: IM B3, voltage: 5000V, current: 61A, power: 400kW, power factor: 0.79, speed: 597rpm, thermal class: F, protection class: IP55, explosion protection type: EEx d e II C T4, weight: approx. 5670kg. Includes built-in resistance thermometers. Documentation available. An on-site inspection is possible.

Transnorm belt conveyor 820-600-500 RA2421 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 820 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: Van der Graaf drum motor TM 113 B25-434 Z Motor power: kW 0.55 230/400 V 50Hz Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: supports We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1999 con ...

Transnorm belt conveyor 800-600-500 RA1986 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: Van der Graaf drum motor TM 113 B25-434 Z Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 2,8 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: supports We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Co ...

Key data: 5 t, 150 mm

Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Technical data of the pallet rack stand: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: 100|25 Profile dimensions: P 100 x 100 x 2.50 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 6,000 mm Depth: 990 mm General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

cutting diameter: 500 mm cutting length: 5000 mm saw blade diameter: 420 - 500 mm dimensions: ca.6400 x 1500 x 1600 mm weight: ca. 1600 kg feed: stufenlos digital readout: Motorized length adjustment with digital display manual and spare part list included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thermo Dionex ICS 5000 ion chromatography system, consisting of Dionex ICS 5000 SP (single pump) Dionex Autosampler AS-AP Dionex VWD (UV Detector) Dionex ICS 5000 TC, Used system

Key data: 1500 KG

Technical data of the pallet rack crossbar: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: black Box profile: 104/82 x 50 mm Truss Type: PST22.104LN Lowering for chipboard: 22 mm Agraffe: 3 HK (hook) Clear width: 2,200 mm Max. load per pair of trusses 1,500 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.

Transnorm conveyor belt GF 1000-600-500 RA2423 Technical data: Conveyor length (NL): 1000 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,85 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spe ...

Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible.

FAS belt conveyor 1090-630-500 RA2426 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 1090 mm Nominal/outer width (NB): 630 mm Belt width (GB): 500 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut Conveying length in mm: 1090 Nominal / outside width in mm: 630 Belt width in mm: 500 Driven: Übertrieb scope of delivery: ohne Motor, without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpa ...

HAVE A GDY SIR; WE VE 1 PC NEW ( OPEN BOX ) RCU 502 KONGSBERG REMOTE CONTROLLER. UNIT AT STOCK REV 2.0.2. F W 1.0.7.3 WE VE 1 PC NEW ( OPEN BOX ) UNUSED RMP 420S KONGSBERG REMOTE MULTIPURPOSE INPUT /OUTPUT UNIT AT STOCK IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Travel path X/Y/Z: 500mm/380mm/350mm, table dimensions X/Y: 800mm/400mm, spindle taper: SK40, quill stroke: 50mm, speed: 5000rpm, rapid traverse: 4m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1800mm/2000mm/2000mm, weight: approx. 2000kg, control: Heidenhain CNC 432. An on-site inspection is possible.

Diesel Generators 1600 kWe / 50Hz with CAT 3516B engines and local control panel We have multiple identical CAT 3516B skid-mounted diesel generating sets available, all manufactured in 2018 and installed in the same HFO power plant, complete with full HFO plant auxiliaries. Each engine is coupled to a 2000 kVA / 415 V / 50 Hz brushless synchronous alternator via a flexible coupling, both mounted on a rigid base frame. These units are optimized for low emissions, high efficiency, and continuous base load operation. The generators have been serviced exclusively by the local CAT dealer and have only 1,500–2,000 operating hours. The standard scope of supply includes: • Engine control panel (EMCP 4) • 24V electric starting system • Radiator cooler Balance of Plant (BOP) equipment is available for customers requiring multiple units. Technical data Engine type CAT  ...

Technical data of the pallet rack stand: Shelving system: Alser Type: NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: brown Profile dimensions: C 80 x 40 x 15 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) Height: 2,500 mm Depth: 1,050 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: Alser Type: NS The scope of delivery includes: 01x Pallet rack stand, used Material color: blue Profile dimensions: C 80 x 40 x 15 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) Height: 2,500 mm Depth: 1,050 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Key data: 500 mm

Machine Type: CNC Machining Center/Milling Machine Manufacturer: AXA Type: VSC0-500 Year of Make: 1989 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-AXA-0825 DESCRIPTION We offer you a used CNC machining center from the manufacturer AXA. Available from week 37 / 2025. - Fourth axle - Tool holders - Plenty of spare parts and fourth axle from a sister machine Machine weight 3t more technical data will follow! Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!