rs 50 used for sale

Vernier caliper, caliper, vernier caliper -Manufacturer: Helios, caliper gauge with fine adjustment -Measuring range: 0-500 mm -Vernier: 0.05 mm -Dimensions: 655/230/H15 mm -Weight: 1.1 kg

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 500 x 280 mm -Dimensions: see photo technical drawing -Dimensions: 500/280/H180 mm -Weight: 53 kg

Müro paper milling machine A4; with frame; suitable for Müro 5000/A4. Müro paper mill; with frame; used for Müro 5000/A4.

Inv. Num. : 7718 Type: GL MATIC 500 Producer: OMAS Generated: Parameters: The machine is in good condition.

Inv. Num. : 7719 Type: VK-500G Producer: PSG Plus Created: 2020 Parameters: Internal dimensions of the machine (LxWxH): 400 x 200 mm

tool holder, tool holder, milling holder, milling tool -Manufacturer: Komet, Mount: SK50 -Type: AB 50x80x60 Ex CELL-0 -Dimensions: 95/90/H185 mm -Weight: 3.7 kg

conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: KJ, -Type: KA69 500B -Speed: 8.3 m/min -Belt width: 500 mm -Conveyor length: 11200 mm -Drive: Drum motor, see photo type plate -Transport dimensions: 11200/1170/H230 mm -Weight: kg

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kW Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kw Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Vacuum cleaner motor, radial blower for sweeper, radial blower, fan, blower -Manufacturer: SPAL, radial fan from sweeper Hako Hamster 500 E -Type: 008-B37/C-42D -Voltage: 24 V -Connection input: Ø 70 mm -Connection output: 100 x 45 mm -Dimensions: 150/120/H145 mm -Weight: 0.7 kg

gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type SUA 506B IA 81N4 -Speed: 13.7 rpm -Engine: Type WAF81N4 0.75 kW -Shaft: Ø 30 x 125 mm -Protection class: IP55 -Dimensions: 480/210/H240 mm -Weight: 37 kg

Height 1850 mm Width 950 mm Length 2650 mm Capacity 500 l Power supply: 400V 50Hz 3N Total power 12.5 kW Main Material Stainless steel, acid-resistant Stirrer Type Spiral Agitators Product ejection Pneumatic bottom flaps, product ejection from below Loading No loading, it is possible to buy a pillar loading for the machine Mixer Type Open Mixer

Dryer HERBOLD T 508 Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

shell end mills, cylindrical milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, cylindrical milling cutter, shell milling cutter type N -Size: 50 x 100 mm -Inside: Ø 22 mm -Dimensions: Ø 50 x 100 mm -Weight: 0.8 kg

Fully automatic cross strapping line Mosca RO-TRI-5 & RO-TR-500-4 Condition: overhauled, serviced, fully functional, ready for use Equipped for 8 mm polypropylene strapping Tape feeding and tape insertion into frames automatically Welding system: Heat wedge welding/welding tongue

Used Roll Splitting Machine Manufacturer: KLANKE Type: RGS-50A Year of manufacture: 03/2013 specifications: Roll width: max. approx. 3,000 mm Roll diameter: max. approx. 2,100 mm Cutting force: approx. 60 t (2 x 30 t) Operating pressure: max.: 200 bar Drive power: 7.5 kW Machine weight: approx. 15,500 kg Oil tank volume: approx. 140 Ltr. including frequency converters including: - Steel plate belt as feed belt Type: TLK 3000 Conveyor width: 3,000 mm Length: 5,520 mm Drive power: 3.0 kW Speed: 0.1 m/s Conveyor chain: FV 140 Steel plate: 8.0 mm with tube 60 x 40 x 4 mm - Steel plate tape as take-off belt Type TLK 3000 Conveyor width: 3,000 mm Length: approx. 3,500 mm Drive power: 3.0 kW Speed: 0.1 m/s Conveyor chain: FV 140 Steel plate: 8.0 mm with tube 60 x 40 x 4 mm including frequency converters  ...

Offer 24289 Specifications: - Max. cutting width 3060 mm - Max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjustment screws - Number of hold-downs 15 pcs - Stroke rate 23 to 43 rpm - Front angle stop -Mot. Positioning-controlled back gauge 15 - 850 mm - Cut line illumination - E – Footswitch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 500 mm -Type: S1-32/20x500 -Piston rod: Ø 20 mm -Mounting: bolt circle Ø 85 x 8 mm -Dimensions: 710/83/H103 mm -Weight: 5.5 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder type DGW-50-500 -Stroke: 500 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm / M16 -Max. pressure: 12 bar -Dimensions: Ø 57 x 700 mm -Weight: 5.7 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Manufacturer: FMA Pokorny, hydraulic cylinder tie rod cylinder stroke 50 mm -Type: 50030-00-5 -Piston rod: Ø 16 mm -Dimensions: Ø 65 x 340 mm -Weight: 5.6 kg

Original Danfoss frequency converter 1,5 kW 2,2 kW and many more

Surplus/Never used or installed, High suction pressure compression unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: Profile 500 -Length: 125 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 125/65/H60 mm -Weight: 0.7 kg

faceplate, faceplate chuck, four-jaw chuck, facing chuck -Faceplate: chuck size Ø 500 mm -Mounting: Short taper 8 (Ø 136-139 mm) -Bolt circle: Ø 173 mm -Through hole: Ø mm -Groove width: 20 mm -Dimensions: Ø 500 x 120 mm -Weight: 58 kg

Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg

Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: • TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device • DVE 9070 Cover and protective film removal • SFM 5072 Filling and sealing machine • NTS 8140 Transport system • Output max. 36,000 disposable syringes/h, infinitely adjustable • For disposable syringes 0.5 - 10 ml depending on format set • For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set • For 100 mm nest • For tub H max. 130 mm • Parts in contact with the product made of stainless steel AISI 316L • IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English • Calibration (KAL) for all process-relevant measuring systems • Material specification • PLC Siem ...

New chain hoist with warranty Year 2013 Stroke 1/4 m/min complete with underlays, landing gear, etc.

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 610 mm -Length: 5 m -Transport dimensions: Ø 280 x 610 mm -Weight: 32 kg

STROMAB pneumatic cut-off machine mod. TR 500 – CE standards – used - With 4000mm TIGERSTOP electronic positioning stop - Table with 4500mm infeed rollers - Table with 4500mm outfeed rollers - Blade diam. 500 - Maximum cutting capacity: 360 mm (L) to 60 mm (H) 135 mm (H) to 280 mm (W) - 10 hp motor - 415 volts - Matr. 1377 - Year 2007

Key data: 2040 mm, 3 mm

Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 2300 kg

Load hook, retractable safety device, load securing device -Load securing device: Type 16 -Load capacity: 500 kg -Rope length: 6.7 m -Note: not for persons -Dimensions: 720/240/140 mm -Own weight: 12.8 kg

sheet width: 2040 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,30 t dimensions of the machine ca.: m Manual back stop up to 500 mm Side stop and table extensions Knives sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm belt conveyor GF 3990-700-600 RA2069 Technical data: Conveyor length (NL): 3990 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3990 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: ...

Tires, solid rubber tires, forklift tires -Manufacturer: Rota, solid rubber tires 2 pieces -Tire size: 200/50-10 RIM 6.50F-10 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimensions: Ø 440 x 200 mm -Weight: 34.3 kg/piece

Length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop -Length stop: for various processing options -Max. stop length: 500 mm -Shaft: Ø 25 mm -Dimensions: 700/100/H110 mm -Weight: 3.6 kg

Transnorm Rising falling Incline belt conveyor GF 7750-600-500 RA2054 Technical data: Conveyor length (NL): 7750 mm (4150 mm + 3600 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4BMG Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7750 Nominal / outs ...

Lippert belt conveyor GF 3220-650-500 RA1466 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3220 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 20 ...

Manometer, test manometer, saw tension gauge -Manometer: Saw tension gauge -Type: 0 to 5000 kgs/cm² -Mounting: see photos, bore Ø 16 mm -Dimensions: 70/60/H160 mm -Weight: 1.0 kg

roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block -Roller conveyor: non-driven, length 1.65 m on solid base frame, height adjustable -Roll width: 500 mm -Roll diameter: 80 mm -Roller spacing: 230 mm -Transport dimensions: 1480/720/H1020 mm -Weight: 134 kg

arm length: 5000 mm weight max. in kg: 500 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.35 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: - mm tool adaptor: - power requirement: - kW weight of the machine ca.: 70 kg dimensions of the machine ca.: ? m Articulated spindle drill head with 8 spindles Maximum pitch circle diameter 200 mm, Minimum spindle distance 41 mm, Height connecting flange/spindle end : 570 mm, Gear ratio 1:2, Weight approx. 70 kg Drilling capacity 22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crane block, crane hook, load hook, single hook, bottom block -Crane hook: Crane hook load capacity 5 t -Rope groove: Ø up to 22 mm / see photos -Dimensions: 630/297/130 mm -Own weight: 32.6 kg

We offer for sale our Trumatic 5000R laser punching press. The machine is used and in very good condition. Basic data from the nameplate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Ujznvnkmpx Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - Work surface 3070x1660mm - Max. sheet thickness 8mm - Axis of rotation of the tool head C1 and C2 - Form function - Thread function - Multibend function - Pneumatic press - Automatic sliding of details 500x500mm - Water-cooled servo motors Additional equipment of the machine: -Light barrier Softpunch function - Details of the slide sensor - Device for blowing out small details - Chi ...

table diameter: 500 mm table load: 0,4 t table height: 160 mm total power requirement: 0 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 0,70,80,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet - Tool cabinet. Drawer cabinet Stumpf Series 3000, sturdy design, total load 4400 N -6 drawers: layout/height see photos -Load capacity: see photo type plate -lockable: with key -Dimensions: 500/500/H1000 mm -Weight: 43 kg

Row limit switch, push button, limit switch, cam limit switch -Condition: unused -Number: 25x row limit switches available -Price: per piece -Dimensions: 120/85/H70 mm -Weight: 0.8 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 1000 mm -Depth: 500 mm -Height: 1880 mm -Door: lockable, without lock -Weight: 98 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 950 mm -Depth: 500 mm -Height: 1950 mm -Door: lockable, without lock -Weight: 84 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 1115 mm -Depth: 500 mm -Height: 1950 mm -Door: lockable, without lock -Weight: 90 kg

drivers seat, forklift seat, tractor seat, tractor seat -Manufacturer: Klepp, drivers seat with suspension -Type: unfortunately without a type designation -Adjustable rails: with hand lever -Weight adjustment via handwheel -Dimensions: 500/470/H560 mm -Weight: 20 kg