rs 50 used for sale

Radio system, antenna contact module -Type: IRIS RS485-EXT-02 -Channel 1: 433.30 MHz -Quantity: 2x sets of 2 available -Price: per set -Weight: 0.1kg

Radio system, antenna contact module, wireless RF modem, Modbus -Manufacturer: TRL, radio system wireless RF modem ovp -Type: IRIS RS485-EXT-02 -Number: 2x module available -Price per piece -Dimension: 135/65/H30 mm -Weight: 0.1 kg

ROTOCONTROL RSH 440 ECOLINE  Age: 2020 – like new! Configuration:  440mm Wide Label Slitter Rewinder  Maximum Web Width 440mm,  Unwind (710mm Max Diameter)  Dual 450mm Rewind,  Max Mechanical Speed: 300m/min,  Servo Driven,  Web Guide,  Splice Table,  Shear Slitting Unit.  45mm, 40mm & 76mm mandrels

-Stop and mixer Boku -Model: RS 40 CS -with digital control -with 1 stainless steel boiler -with 2 whisks

Level shifter, level shifter, converter, level adjustment -Manufacturer: pilz, level adjustment type V24/RS485 -Interface: 9 25 pin -Voltage: 220V -Dimensions cardboard: 155/100/H80 mm -Weight: 0.4 kg

Interface converter, converter, module converter, FL Comserver, interface converter, interface converter, interface converter, -Manufacturer: RSF, Converter -Type: ZEV 5 Ord.-No. 14 369 519 -Number: 3x converter available -Price per piece -Dimension: 230/60/H35 mm -Weight: 0.3 kg/pc.

Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding

Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit, tool heater -Manufacturer: PSG, temperature control unit for tool heating with up to 8 control zones -Type: RSD II 8 -P max: 21 kW -Dimensions: 490/400/H490 mm -Weight: 30 kg

Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Bowl cutter Meissner Type: RSM 325 Condition: Need renovation/used

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 250 pieces -Type: RSGU 11/15 D1 W1 -Clamping range: 11 mm -Band width: 15 mm -Quantity: 3x bags with 250 pieces available -Price: per bag -Bag dimensions: 400/300/H60 mm -Weight: 2.5 kg/cart.

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 33 pieces -Type: RSGU 8/15 -Clamping range: 8 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 30/21/H15 mm -Weight: kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 99 pieces -Type: RSGU1 10/15 -Clamping range: 10 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 35/23/H15 mm -Weight: kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 89 pieces -Type: RSGU1 15/15 -Clamping range: 15 mm -Band width: 15 mm -Dimensions each: 40/28/H15 mm -Weight: kg

used parts and components available from stock for Sabo 1203; 1500 (also new parts!); 1502D; RS84 Senior Ransomes 213 D, 350 D, Commander 3510, Fairway 405, MK IV, MK 11, Rider J74: mowing spindles, hydraulic components, engines, axles, wheel drives, hydrostats, hydraulic pumps, wheels and tires, steering parts, steering orbitels, etc. Other miscellaneous parts of Agria 9300, Jacobsen HR5111; 1471, Gutbrod 2850DA, Iseki div., Hako 1800-2750, John-Deere div., , Shibaura SP1840; CM364, Toro Pro81 etc. ... complete spindle units and 3-fold cylinder mowers Bucher, Loipfinger, Jacobsen as well as Ransomes and SABO, self-propelled Ransomes MK IV... Info and offers on request. No sending of package deals or lists.

LISTING ID: 22744 BRAND: MASSON MODEL: RSA 60 RATIO:1:1.390 POWER: 153 kW (205.5 hp)2100 RPM SN 16341 HS CODE: 84836080 CONDITION: NEW

1. Qty. 1 Second-hand flat & satchel paper bag machine Mfc.: Holweg Type: RS2 flat & satchel paper bag machine with 2 colour in line flexo print Bag width: 70-380 mm Bag length: 160-680 mm Printer: 2 colours Machine can make paper bags with windows. Condition: great working condition

2. Qty. 1 Second-hand flat & satchel paper bag machine Mfc.: Holweg Type: RS2 flat & satchel paper bag machine with 3 colour in line flexo print Bag width: 70-380 mm Bag length: 160-680 mm Printer: 3 colours Machine can make paper bags with windows. Condition: great working condition

A versatile casing stuffing/clipping system. Suitable for applications such as: sausage, deli meats and ham; fresh ground meats; whole muscle meats; netted meats; non-meat sausage, hams, and deli meats; fresh ground fish; surimi/fish sausage paste; raw/frozen/refrigerated pet food; pumpable cheese; soup; sauce; ground fruits and vegetables

Used through-cutter MEISSNER, type: RSM 65 -overhauled- - 65 litre bowl - Machine parts overhauled - Condition: Very good, ready to use Inspection and test run possible by arrangement.

Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: RSA, Deburring machine type Deburrer DUO -Drive: 2.4/3.7 kW / 1500/3000 rpm -Brush: Ø 255 mm -Brush width: -Dimensions: 440/945/H1185 mm -Weight: 277 kg

Used Roll Splitting Machine Manufacturer: BOA Type: RSM 40 t specifications: Roll width max.: approx. 2,600 mm Roller diameter max.: approx. 1,550 mm Drive power: 18.5 kW Cutting force: approx. 40 t Machine weight: approx. 5,500 kg including: Feed and take-off conveyor belt Drive power: 1.5 kW each Weight approx. 2,500 kg

Paint shop with UV dryer flow. Year of construction 007/00 Sale on behalf of customers, further data on request

"RSA Heavy Duty Sawing, Deburring, Cleaning and Drying Center" for Steel Pipes The machining center consists of: 1) RSA Precision Speed Saw RASACUT SC 3000 with Bundle Loader 2) RSA linkage between the RSA RASACUT precision high-speed saw and the RSA RASAPLAN XY 3000 deburring system 3) RSA deburring system RASAPLAN XY 3000 4) Extraction system/wet separator for RSA deburring system RASAPLAN XY 3000 5) RSA Cleaning System RASACLEAN ET 3000 6) RSA Drying System TURBODRY Bundle loader extended for pipes up to 6,200 mm TECHNICAL DATA Lswvuey E Iype Nu Iehf Tube Ø: 6 mm to 55 mm Wall thicknesses: 1 - 6 mm Bar weight: max. 10 kg/m Materials: Steel Magnetism: max. 3 gauss Output lengths: 6200 mm sawable lengths: 150 - 3000 mm Limitation: Ø 6 – 7.9 mm max. length: 1200 mm Ø 8 – 9.9 mm max. length: 1500 mm Ø 10 – 12 mm max. length: 2000 mm Length tolerance ...

- Type: RS 10 (Rotoscreen) - Year of construction: 2003 - Consisting of a fixed and a movable slat grille - Material: stainless steel

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: RS708E/100 Year of Make: 1997 Degree of protection: IP 55 Speed: 556 rpm Operating voltage: 400 / 690 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 45 kW Flow rate: 237 L/min. Dimensions: L 1700 x W 700 x H 850 mm Curb weight: Weight 1500 kg Technical documentation: No Condition: Used Price: On request

Alfa Laval Drehbürstensieb

Brand: Rollepaal Pipe Extrusion Technology B.V. Model: RSV 8/1 Year of construction: 2005 Pipe outer diameter max: 8 mm Cooling length: 1000 mm Spray pump: 2.2 kW

Delivery rate 4.61 m³/min at 10 bar Delivery rate 5.23 m³/min at 8 bar Operating pressure 10 bar Nominal power 30.0 KW Operating hours 14,279 Load hours 11,148 Compressed air connection G1 1/4" Sound level 69 dB(A) Space requirement L - 1,400 x W - 830 x H - 1,640 mm Weight approx. 850 kg

RSA NC-V 2000 Deburring Machine + Pipe Washer + Coral Filter Complete industrial tube processing and post-treatment line The plant consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpiece lengths up to max. 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous pipe washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge Filter Extraction System Power: 4 horizontal high-performance filter cartridges with fully automatic Jet-Pulse compressed air cleaning (very low-maintenance). Function: Reliably extracts brush dust, sanding residues or fumes from the car wash. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine that has been special ...

nominal force:160 t stroke:140 mm no. of strokes:85 /min distance between columns:400 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:400 x 450 mm table height over floor:800 mm Allowed max. force:230 t ram surface:400 x 320 mm spindle diameter:125 mm power requirement:7,35 kW weight:5,0 t dimensions (WxDxH):1,7 x 1,2 x 2,9 m

Inv. Num. : 8161 Type: RSO 32 Producer: Reinhardt Created: 2008 Parameters: The machine is in good condition.

ID3460 STS Scheltzke RS3000 E-FU-AUT year/Baujahr 2015 850 kg Stirring station, electric drive 3.0 KW Stirring station, electric drive 3.0 KW

Cylindrincal grinding machine, KNUTH RSM 750, interna/external, DRO, This machine can be inspected under power in our warehouse., Mimu Machine Tools, Gussago BS Italy

Risco RS1040 MAS Vacuum stuffer Serial: A003004 Stainless, 50L agitated hopper, variable speed, portions from 5 to 10000g, 2.3KW, with manual, 3Ph

Size: 520 x 740 mm Equipments: suitable for Heidelberg, Komori, KBA, Manroland, Ryobi, Sakurai as is Easy installation and removal

Widebelt Sander line with 3 machines Working width: 1300 Composed of: Boere Elite - 1 x calibration unit with contact roller - sandinmg unit from below Ernst LKB - Cross Sanding Unit - Longitudinal Sanding Unit OTT RSO - Calibration Roller - Sanding pad

A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible.

Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible.

grinding diameter: 300 mm grinding length: 1000 mm centre height: 150 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5 x 3 x 2,2 m No. 4959 Universal cylindrical grinding machine STÖCKEL RSU 100 NC-T Working area: approx. Ø 300 x 1000 Drive: 4/1 kW Electronic handwheel Internal grinding device Coolant device with magnetic separator documentation External grinding spindle Wheel Ø 400 x 50 / 250 x 30 mm 4 kW / max. 1400 mi-1 Internal grinding spindle 1 kW / max. 1400 min-1 Swivel range: - Table : -6° / +10° - Grinding headstock 180° - Workpiece headstock -90° Space requirement approx. 5 x 3 x 2.2 m Transport dimensions approx. 6LM Weight approx. 5.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pulling force - max.: 25 t max. ram stroke: 1500 mm max. workpiece diameter: 630 mm cutting speed: 1,5 - 7 m/min return speed: 7 - 25 m/min workpiece height max.: 360 mm tool diameter: 130 mm Shank diameter: 70 mm table surface area: 600 x 600 mm Control: distance between columns: 635 mm total power requirement: 18,5 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 1,1 x 1,7 x 5,2 m Machine was hardly ever used, not even in single-shift operation. - 3 broaching positions, can also be used individually - Hydraulic drive - without tools or other accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 200 kN, 1600 mm

We are selling our SSIA 20/1600 broaching machine, which we are currently still using in production. The machine has a pulling force of 20,000 kg and a broaching length of 1,600 mm.

Pile lifter Rachner RSL 50-A; Condition unused; Platform size 890x630mm; Load capacity 650KG; Automatic mode with light barrier. Pile lift Rachner RSL 50-A; condition never used; size 890x630mm; lifitng capacity 650 kg; autimatic mode with light bar.

Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15

Two complete injection molding plants with two Husky injection molding machines, four complete moulds with all-metal separator, Motan gravimetric mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. To ...

Travel X/Y/Z: 4000mm/1800mm/2500mm, max. length measurement error: 55 + L/35, max. single-point error: 35, control: WPC 2040. Includes test head PH10M Plus, PHC10-3, sensor TP20, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.

Height=0.95 m, Overall length= 0.7 m, Overall width= 0.75 m,

Height=1.85 m, Overall length= 2.5 m, Overall width= 3.5 m, Net weight= 4500 kg,