rs 30 used for sale

2 machine vices, as good as new and unused Jaw width: 150 mm Jaw height: 50 mm Clamping distance: 300 mm incl. ring wrench, clamping claws, stop and slot nuts Transport dimensions: 800 x 600 x 400 mm, approx. 75 kg Auction-ID: A7-46660-25

Spindle diameter: 580 mm Tailstock stroke: 570 mm Turret stroke: 150 mm Machine not working, FANUC power unit NEEDS REPLACEMENT Sale intended only for revampists or scrap dealers Auction-ID: A7-46538-32

2 machine vices, as good as new and unused Jaw width: 150 mm Jaw height: 50 mm Clamping distance: 300 mm incl. ring wrench, clamping claws, stop and slot nuts Transport dimensions: 800 x 600 x 400 mm, approx. 75 kg Auction-ID: A7-46660-24

76dB low sound; accessories; 5.3kg; Auction-ID: A1-46415-1032

2 machine vices, as good as new and unused Jaw width: 150 mm Jaw height: 50 mm Clamping distance: 300 mm incl. ring wrench, clamping claws, stop and slot nuts Transport dimensions: 800 x 600 x 400 mm, approx. 75 kg Auction-ID: A7-46660-26

2 machine vices, as good as new and unused Jaw width: 150 mm Jaw height: 50 mm Clamping distance: 300 mm incl. ring wrench, clamping claws, stop and slot nuts Transport dimensions: 800 x 600 x 400 mm, approx. 75 kg Auction-ID: A7-46660-27

This concerns an unused product, 16.1 mm, ID 6MIL WALL, 30 cm spacing, 0,64 LPH @ 1 Bar Auction-ID: A1-46064-33

Capacity 30 Kg, division: 10 gr, plate: 400x400mm. Serial: 1594 Estimated weight: 10 kg Approximate dimensions: 600x600x900h mm Auction-ID: A7-46655-99

Saphir Knife Roller SinusCut SC 300 – New Machine (2025) General data • Manufacturer: Saphir • Model: SinusCut SC 300 • Year of construction: 2025 • Condition: New machine Technical data • Working width: approx. 3.00 m • Net weight: approx. 915 kg • Additional weights possible: +410 kg • Impulse rail: +125 kg Features & Benefits • Knife roller for intensive grassland maintenance • SinusCut system for effective scar processing and ventilation • Sharpened and coiled knife elements for a clean cut • Roller elements with rubber bearings for optimal ground tracking • Stone protection plates for increased safety • Rubber splash guard • Impulse rail for additional machining intensity • Additional weights for optimal ground pressure • Lighting system reversible (front / rear) • Incl. warning signs and marker lights Con ...

Sheet metal deburring machine - ESA touch panel - Incl. turbo separator - Incl. 3m feed table - Replacement tapes - Documentation Workpiece width 900 mm Workpiece height - max. 40 mm Feed speed mm/min Workpiece length 0 mm Control Total power requirement 35 kW Machine weight approx. 3.7 kg Dimensions LxWxH 6.0 x 2.35 x 2.2 Auction-ID: A7-46642-35

Lifting magnet, load capacity 300Kg, see pictures. Condition: never used / new (5) Auction-ID: A7-46642-124

Manual press brake Bending length 300mm Material thickness max. 2mm Knife widths 25, 50, 75 and 150mm Bending angle max. 90 degrees Condition: never used / new (5) Auction-ID: A7-46642-110

Consisting of: various ISO/HSK A80 holders, including Haimer, Seco, EPB, precision holders (G2.5 balanced). Auction-ID: A1-45979-11

New and unused Auction-ID: A7-46327-113

Only 120 hours of usage. Includes the following items: - 1 x 020080 Hammelmann 15kW Pump 1; 1 x 301500MH Swift-Jet Pro 3000 (510)[MARL/HAMMELMANN]; 1 x 521050 SJP Abrasive Kit; 1 x 000850 SJP Water Only Cutting Head; 1 x 051120-SJP Swift Jet pro On-Site Commissioning /Training; 1 x 051092 Keyboard MK270 Logitech - ENGLISH; 1 x 101393 WIFI Dongle. Full specifications can be found on the PDF files Collection by Appointment Only. This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-46687-1

Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Working horizontally or vertically Round material solid 30 mm Square material solid 30 mm Flat steel 50 x 10 mm Angle steel mm Axle diameter 30 mm Working speed 6.0 rpm Roller diameter - tools 132 mm Total power requirement 0.75 kW Machine weight approx. 0.25 kg Dimensions approx. 0.6 x 0.8 x 1.3 m Auction-ID: A7-46642-106

Unchecked from practice Closure Auction-ID: A7-46327-64

Including L0500922/ L0500972/ L0500962/ unused and in original packaging Auction-ID: A1-46698-251

Shielded Gas Welding Machine: - With pulse function - 300Amps - 400Volt - Hose package 3m. - Ground cable - Wire reels for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm Welding current max. 300 A Open circuit voltage 55 - 76 V Connection voltage 400 V Weight 75 kg Dimensions LxWxH 950 x 560 x 880 mm Auction-ID: A7-46642-119

Segment Swivel Bending Machine Pneumatic - Manual back gauge max. 830mm - Bending angle preselection via limit switch Sheet width 3000 mm Sheet thickness 2.0 mm Stand width 3140 mm Opening width 80 mm Total power requirement kW Machine weight approx. 1.45 t Space requirement approx. 3.8 x 1.5 x 1.6 m Auction-ID: A7-46642-80

Sheet metal roller for the vice. Maximum working width 300 mm. Maximum rolling capacity 2.5 mm. Diameter of the rollers 32 mm. Condition: never used / new (5) Auction-ID: A7-46642-240

Hydraulic guillotine shears with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time-dependent) - Sheet thickness adjustment - Backgauge with free-wheeling function - Cutting line lighting - Side stop - 3 support brackets - Good condition Sheet width 3050 mm Sheet thickness 16 mm Stand width 3050 mm Stop depth 15-1000 mm Cutting angle adjustment yes ° Cutting gap adjustment yes mm Connected load 30 kW Machine weight approx. 14..5 t Space requirements approx. 4.0 x 260 x 2.55 m Auction-ID: A7-46642-25

Electric backgauge; Max. power: 11.75kw ; Nominal capacity sheet thickness: 6.5mm ; max. working length 3050mm ; Voltage: 380V, 50Hz; Max. dimension of tools: 3160mm; max. mass of tools: 49.3 kg; for more details see photos of nameplate Auction-ID: A7-46619-250

Including face milling, Weldon, various dimensions / unused and in original packaging / including pallet box with collar Auction-ID: A1-46698-54

Description Machine type: Trailer-mounted concrete pump Manufacturer / Brand: CIFA Model / Type: v Year of manufacture: 2003 Country of manufacture: Italy Serial number: 00278 Performance Max. theoretical output: 30 m³/h Max. oil pressure: 220 bar Max. CLS pressure: 70 bar Engine Engine manufacturer: Deutz Engine model: F4L 1011 F Engine power: 38 kW (50.9 HP) Engine speed: 2400 rpm Displacement: 2.732 l Engine serial number: 00798493 Weights Max. weight: 2,470 kg Configuration & Features - Trailer-mounted concrete pump - Integrated hopper with safety grid - Control panel with pressure gauges and switches - Stabilizing support legs - Towable chassis with road wheels Condition / Remarks Used concrete pump in working condition. Normal wear consistent with age and use. Auction-ID: A7-45990-24

Nikon CoolPix L820 - 16,1MP -30x Opt.Zoom - Full HD Video Auction-ID: A7-46327-261

Combination machine, sheet metal roller, bending and cutting Bevel max. 1 mm. Rollers max. 1 mm. Cut max. 1 mm. Width of segments 25 - 50 - 75 - 75 - 105 mm. Maximum working width 305 mm. Diameter of the rollers 38 mm. Maximum bending angle 90 degrees. Condition: never used / new (5) Auction-ID: A7-46642-113

Approx. 300 Mickey Mouse comic booklets, special issue, poster Auction-ID: A7-46327-73

Consisting of: various ISO 50 holders, Depo, precision holders Auction-ID: A1-45979-12

Electro-hydraulic mandrel tube bending machine with - Bending mandrels for 18mm pipe - Tools for : 8mm, 10mm, 12mm, and 18mm. - PC interface - Laptop - Documentation For more accessories see pictures Tube diameter 4 - 28 mm Mandrel length 3000 mm Bending radius max. 90° Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.75 t Dimensions approx. 3.7 x 1.2 x 1.5 m Auction-ID: A7-46642-87

Lifting magnet, load capacity 300Kg, see pictures. Condition: never used / new (5) Auction-ID: A7-46642-188

Swagelok Pipe Cutter for Outer Diameters from 6 to 25mm Suitable for stainless steel, soft copper and aluminum tubes with a tube outer diameter of 6mm to 25mm or 3/16 inch to 1 inch With this pipe preparation and cutting tool, you get right-angled, smooth, burr-free pipe ends that guarantee high-quality connections and flow characteristics. Auction-ID: A1-46686-1034

Manufacturer: OHAUS Series: Defender 3000 Model: T31P (Platform Scale Display Device) Housing: High-impact ABS plastic housing Display: Backlit LCD, 6-digit, 25 mm digit height Auction-ID: A1-46686-35

Box dimensions approx. 480/450 x 320/300 x 2 mm Auction-ID: A1-46503-313

Unaohm EP 305A Field Strength Meter TV Panoramic Field Strength Meter RF Signals Auction-ID: A7-46327-128

For insert drill type Pentron/ 50 pieces 05/ 100 pieces 06/ 50 pieces 07/ 50 pieces 08/ 50 pieces 09 Auction-ID: A1-46698-170

SKU: SHR-6KT-ISO4014-10.9-(ZFSHL)-M16X85-NSP WÜRTH PN: 991280498 according to ISO 4014, strength 10.9, zinc flake coating (ZFSHL) Auction-ID: A1-46694-423

Manufacturer: OHAUS Series: Defender 3000 Model: T31P (Platform Scale Display Device) Housing: High-impact ABS plastic housing Display: Backlit LCD, 6-digit, 25 mm digit height Auction-ID: A1-46686-36

5 wires with a cross-section of 1.5 mm2 each Auction-ID: A1-46666-425

Water-cooled, Welding current max. 320 amps 2 hose packages incl. accessories see pictures Condition: unchecked (6) Auction-ID: A7-46642-233

used for Quatron type insert drills Auction-ID: A1-46698-145

Quick clips for electrical duct diameter 25-30mm NEW CONDITION 13 boxes of 100 pieces Total 1300 pieces Possible to send by post (+additional cost) Auction-ID: A1-45887-201

Filterplate 600x600 stainless steel Material:? AISI 304 13mm complete with screws 2 plates with holes 2 sliding shous gaskets seperatly suitable for Seitz PALL Orion A60, B60 OEM Order number: Fs 50763

Operating voltage: 220/380 V Frequency: 50 Hz Rated current: 4.0/2.3 A Speed: 1450 rpm Grinding wheel dimensions: 300/50/76 mm Reference: Schönichen - Lot 88 Auction-ID: A7-46763-295

300 running metres, 6/5/6 mm thickness, height 2.03 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 2030 mm height and 2,500 mm length Post for concreting: 2600 mm Number of fence elements: 120 pieces Number of posts: 121 pieces Total weight: 3936 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Indu ...

Tactical Vests / Modular Vests Lattice box/pallets not part of the auction. Auction-ID: A1-46806-17

ul> Distance between heads: 3000 mm Diameter above the bench: 800 mm Lathe equipped with a fixed bezel Digital visualization MINILEXPRO 3-jaw chuck Manual tailstock Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-209

300 running metres, 6/5/6 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 120 pieces Number of posts: 121 pieces Total weight: 3720 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Industri ...

seller can possibly load for transport - Professional moving lift / ladder lift mounted on trailer, suitable for transporting building materials, roof materials, furniture and other goods to higher floors. Equipped with aluminum lattice mast, electric drive, wired remote control and power connection. Thanks to the galvanized chassis, this lift is easy to transport and can be used on various construction sites. Interesting device for contractors, moving companies, roofers or rental companies - Professional electric moving lift / ladder lift - On galvanized trailer - Year of construction: 2006 - Brand plate present (partially readable) - Lifting capacity: approx. 300 kg - Maximum lifting height: approx. 19 m - Aluminum lattice mast - Electric drive - Leroy Somer electric motor - Control box with wired remote control - Emergency stop present - 380V / power current connection (blue plug avai ...

On offer is a used, high-quality and robustly built Lambert market/sales trailer with folding/foldable body. The trailer is suitable for mobile sales, weekly markets, events or comparable purposes. Construction and operation: The trailer has a crankable lifting roof, all-round crankable supports and smooth-running gas-pressure folding elements. According to the seller, the folding elements open very easily and hold well. The sales area is completely covered. Equipment: fold-out sales tables Sturdy real glass display case Side panels and large back panel as rain protection Simple electrical system with battery Shore power connection and light Sink older cash register/scale with cash drawer Weights and other small parts Condition: The trailer is in a used condition appropriate to its age. There are signs of wear and tear due to age and use, soiling on tarpaulins and visible cor ...