rs 30 used for sale

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Reisser, solar fastener 8.0 x 150 10 pieces/carton -Type: RSB-A-8.0/M10 x 150/50 -Material: A2 stainless steel/galvanized -Quantity: 108 boxes available -Price: per box -Carton dimensions: 285/90/H75 mm -Weight: 1.2 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Reisser, Solar fasteners 8.0 x 125 10 pieces/carton -Type: RSB-A-8.0/M10 x 125/50 -Material: A2 stainless steel/galvanized -Number: 38 boxes available -Price: per carton -Cardboard dimensions: 285/90/H75 mm -Weight: 1.2 kg

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 -Individual components: see photos -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Controller, Ecograph, Alpha-Log, Data Recorder, Recorder, Color Hybrid Recorder -Endress Hauser: Alpha-Log color hybrid recorder with accessories -Recorder: Type RSA10-31B1T -Isolation amplifier: RN 221 -Modbus: RS 485 -Thermometer: TST 10 -Pressure transmitter: PMC 133 -Individual components: see photos -Price/handover: complete -Transport dimension: 500/500/H200 mm -Weight: 11 kg

Interface converter, converter module, FL Comserver, interface converter, interface converter, interface converter -Manufacturer: Phoenix Contact, Interface converter, original packaging -Type: PSM-EG-RS232/TTY-P/2K Ord.-No. 27 61 253 -Quantity: 1x Converter available -Cardboard dimensions: 120/90/H70 mm -Weight: 0.3 kg

Control card, output card, control, memory module, PLC control, expansion module, interface module, analog module, analog module, analog output, interface module, communication processor -Manufacturer: Weidmüller, Interface Module -Type: RSSD 123436 -Quantity: 6x module available -Price per piece -Dimensions: 60/90/H75 mm -Weight: 0.1 kg/pc.

Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Inductive sensor: proximity switch -Type: unfortunately no type designation -Sensor cable: RSMV 3-224 -Number: 46x sensor available -Price: per piece -Dimensions: Ø 45 x 25 mm -Weight: 0.1 kg/pc.

for glass scale, scale, digital display, measuring rod, length measuring system, linear scale, fluorescent display, glass scale, scale, length measuring device, linear scale, positioning display, digital scales, digital scale -Manufacturer: RSF Elektronik, digital display from coordinate measuring machine Stiefelmayer C 100 413514 -Type: Z 735M -Dimensions: 275/120/H170 mm -Weight: 3.4 kg

Servo motor, geared motor, electric motor -Manufacturer: Lenze, servo motor with gearbox -Speed: 49.7 rpm -Engine: Type MCA 10140-RS0B0 -Voltage: 390 V / 140 Hz -Power: 0.80 kW -Transmission: Type G50BH121MVAR3C00 i=79.507 -Shaft: Ø 25 x 50 mm -Number: 6x geared motors available Price: per piece -Dimensions: 485/160/H150 mm -Weight: 12.9 kg/pc.

Servo motor, geared motor, electric motor -Manufacturer: Lenze, servo motor with gearbox -Speed: 144.0 rpm -Engine: Type MCA 10140-RS0B0 -Voltage: 390 V / 140 Hz -Power: 0.80 kW -Transmission: Type G50BH114MVAR2C00 i=27.415 -Shaft: Ø 25 x 50 mm -Number: 3x geared motors available Price: per piece -Dimensions: 455/145/H155 mm -Weight: 11.1 kg/pc.

Servo motor, geared motor, electric motor -Manufacturer: Lenze, servo motor with gearbox -Speed: 92.7 rpm -Engine: Type MCA 10140-RS0B0 -Voltage: 390 V / 140 Hz -Power: 0.80 kW -Transmission: Type G50BH121MVAR2C00 i=42.593 -Shaft: Ø 25 x 50 mm -Quantity: 1x geared motor available -Dimensions: 483/160/H170 mm -Weight: 12.5 kg

A Raschel warp knitting machine Karl Mayer is available. Working width: 130inch, gauge: E32, yarn feed: EBA-1, guide bar element: C-32-28/P2, guide needle element: Spec-38-45 G105, latch needle element: L-32-93H-0, knock-over comb element: S-32-93H-0, speed: 1800-2000, yarn monitoring: Laser 4080. Including computer. Documentation available. An on-site inspection is possible.

Electric Drum Screen Machine Drum length 7000 mm, diameter 2000 mm Drive 22 kW incl. control cabinet incl. cleaning brushes Screen perforation and colour according to customer requirements ROBUST CONSTRUCTION ! Optional: Vibratory feed conveyor

- Drum length 5500 mm, diameter 2000 mm (as with Doppstadt SM 620) - Motor 15 kW - Control cabinet - Cleaning brush - Hole size of the drum according to customer requirements - New machine manufactured in Europe - Documentation and CE - 1 year warranty

Key data: 30 KW

Technical data: Manufacturer: Renner Type: RSF-Pro 30 Year of manufacture: 2023 Control: Frequency Controlled Air capacity: 5,600 l/min Operating pressure: 10 bar Rated power: 30 kW Sound level: 69 dB (A) Dimensions and weight Dimensions L/W/H: 1,400 x 830 1,640 mm Weight: 850 kg Condition Condition: Used Functional: Tested and fully functional

General SKU038S118 MakeDrais TypeU.Muehle RS20 (System Welte) No.53596 Year of construction1989 LocationBarneveld Specified Features - Sand mill Material finishCoating Pressure Working pressure jacket2 Bar Main Features MaterialCoated Volume8 Ltr. Motor4 KW Sand mills Vertical sandmill(1x) Capacity8 Ltr Housing dimensions Dia. 250-140x220mm With jacket(1,1 Ltr) Max. temperature80 Degr. C. Motor4 KW, 220/380 Volt with frequency controller Information With switchgearcheck Floorspace1,1x0,7 M Total height1,7 M Weight500 KG Extra SpecificationsRotor and grinding chamber are coated Technical specs Extra informationhouse: Dia. 250-140x220mmSand millsDiscountDraisMills > Sand millsDiscountBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...

Used injection molding machine H160 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-efficiency cap and closure production, making it an excellent choice for beverage production environments that require consistent, high-quality outputs. Manufactured in 2009, the unit features a 160-ton clamp force platform paired with a 24-cavity cap mold optimized for 29/25 mm neck finishes. It is supplied with robust auxiliary equipment to stabilize process conditions and streamline operation in an industrial packaging workflow.Manufacturer: Husky Injection Molding SystemsModel: H160 RS45/42Year: 2009Application: Cap/closure molding for beverage packagingMold cavitation: 24 cavitiesClosure specification: 29/25 mm, Free Start CapNominal part weight: 1.20 g (cap)Clamp force: 160 tonsElectrical supply: 400 V, 50 Hz, 3PH+N+PEMain supply current:  ...

travel -x axis:800/1825 mm travel -y axis:800/460 mm travel -z axis:600 mm Feeding X,Y,Z up to:0 - 40/40/40 mm/min. swival range +/-:+10 bis -90 x 360 Grad Rotary-table:800 x 630 mm number of T-slots:5 T-slot - distance:125 mm T-Slots:18 mm center hole:30H7X15 mm swival range +/-:90 Grad turning speed:20 m/min. Number of axles:3-7 St. Spindle RPM:12.000 1/min max. tool weight:10 kg max. tool length:330 mm diameter of tools max.:80 mm tool changing time:4 sec CNC control with 15.1" color flat-screen 19" machine control panel PCU 50 with Intel Pentium II Windows XP 10.0 GB hard drive

pressure:400 t stroke:280 mm no. of strokes:56 Hub/min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:560 x 750 mm allowed max. force:600 t blow die to die:800 t spindle diameter:200 mm ram surface:560 x 560 mm height over floor:4,1 m power requirement:37,0 kW weight:12,0 t dimensions (WxDxH):2,2 x 2,0 x 4,25 m

General SKU292W519 MakeDrais LocationBarneveld CEcheck TypeRSV60 Main Features Motor44 KW Specified Features - Dissolver Dissolvercheck Disc diametermax 550 mm Motor44 kW, 400 volt, (Ex) With variable speed drive200-1600 rpm With mechanical liftingcheck Motorcheck Information No.42696 Year of construction1970 With switchcheck Floorspace3,45 x 0,90 m Total height4,0 m Weight2200 kg ATEX compatiblecheck Extra SpecificationsDrum cap. 200-400 kg, with controlOther chemicalDissolversCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicFine chemicalsOintmentsPaints & coatingsOils & fatDraisIndustries > Chemical > Other chemicalMixers > DissolversIndustries > Chemical > Catalysts & fillersIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other phar ...

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

General SKU437W1415 LocationBarneveld Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity20 l. Vessel sizesDia. 550x600 mm Dished bottomcheck OutletPneumatic valve With jacketcheck With propellor stirrercheck Motor0,37 kW, 220/380 volt, 1410 rpm Information MakeMedimex TypeMED 265 Mounted on legscheck With switchcheck Floorspace1,10x1,0 m Total height2,20 m Weight850 kg Extra SpecificationsWith ToolTemp temperature controller, type TT400, stainless steel vertical pressure vessel, volume approx 30 l. Stainless Steel ReactorsMedimexReactors > Stainless Steel ReactorsBrand > Medimex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Höchstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Hydraulic radial engine manufacturer Calzoni MR. 3000-F1N1N2S2NX 0401 / 46528, 656592 250 bar Used Husky injection moulding machine, type GL225RS60/50

Battenfeld UTR 300 heating controller for control of Unilog 4000 B

Diesel tank - Heating oil tank - Tank system - Steel tank brand new - with 30,000 litres capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 9010 white. (Other RAL colours are also possible on request!) L = approx. 10.00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - General: You will receive a V ...

305m2 Peri Trio 3.30m Peri TRIO is a cranable formwork system that can be used standing or lying down. With the patented BFD alignment lock, all element connections are made flush, flush and tight.  The only necessary connecting part for normal element joints, outside / inside corners, hinged corners, fitting timber compensations up to 10 cm or the clamping of squared timber is the alignment lock BFD (can be operated with one hand).  All floor plans can be formed with just a few element widths.  The powder coating prevents the concrete from sticking and enables quick and easy cleaning.  Maximum permissible fresh concrete pressure: 80kN /m2

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, die tool -Measures: see drawing in the photos -Dimension: 3060/20 / H79 mm -Weight.: 30.3 kg

electric motor, three-phase motor -Power: 0.18 kW -Electric motor: 3000 rpm -Voltage: 220/380 V -Shaft: Ø 14 x 30 mm -Design: B5 -Dimensions: 250/144/H165 mm -Weight: 6.3 kg

Height indicator, parallel indicator -Max. Working height: 300 mm -Hard metal needle -Dimensions: 175/60/H385 mm -Weight: 1.7 kg

for sale MACC Metal Circular Saw NEW 300 E HSS Circular Saw Blade 300 mm Schnittkep. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 150 kg Machine base can also be purchased. Further models and inquiries to FSA Maschinen AG

Base for bending tool, bending tool, die, lower knife, lower tool, prism tool -Lower tool: for press brake -Total length: 3020 mm -Prism: 20 mm x 90° -Dimensions: see drawing in the photos -Total dimensions: 3020/65/H110 mm -Weight: 136 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Thermal Arc, TIG welding machine, inverter welding machine type LS-300 -Welding power: max. 300 A -ground cable -Dimensions: 410/210/H435 mm -Weight: 21.1 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 200 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.5 kW -Speed: 1430 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg

- Including YUDO SIGMA 800cs robot - Clamping force: 3.000 kN

We offer Compressed air tank Flamco STAG 3000 l 16bar 60°C from compressed air system Picture 1-3 The system is part of a compressed air system in a production hall. It is used built in 1995/2016, and fully functional, in very good condition and is offered - due to restructuring of the use of the hall at our customer. specifications: - Manufacturer: Flamco STAG Behälterbau Genthin - Model: 3000l - Year of construction: 1995 - Item No.: 59457 - TüV.: still available -Ab. Operating pressure: 16 bar -Ab. Ground temperature: 50°C - Type marking ZU 295/6 - Dimensions: D 1200 x H 4000 mm - Weight: 704 kg - Craneable The container is still in our customer's factory in Halle all. The sale is ex-works EXW (loading facilities available). The compressed air system Fig. 4 - 10 also consists of -Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air  ...

Dematic conveyor system Accumulating roller conveyors Roller conveyor 3000-600-540, 750 RA2290 Manufacturer: Dematic Type: Drive unit accumulating roller conveyor Year of construction: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Head and center drive Weight of conveyed goods: up to 30 kg Technical data: SEW geared motor 380V RA2290.1 Manufacturer: Dematic Type: Accumulation roller conveyor extension module Year of manufacture: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Overdrive from RA2290 (necessary) Weight of conveyed goods: up to 30 kg Optionally available e.g: SEW Eurodrive / Movimot frequency inverter Supports Sid ...

Unused, stock item, Model Standard, A4- A6, IP 65, max. load capacity 30 kg, weight 99 kg, warranty

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions 5,0 X 1,5 mt., Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, n.2 x 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.1 chain conveyor on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 5,0 x 2,4 mt., capacity: 800-1.500 kg/h depending on materials

Sturdy supporting structure in painted carbon steel, loading hopper, Shearing size 1.300x900 mm, 2 x 22 kw drives, constructed in 2024, Rotor Length 1.300mm, N.25 knives, knives thickness 50 mm, 2 hooks, Weight about 4.500kg, Shaft speed 15/17 rpm, electric cabinet, complete with CE, users manual, electric drawings, installed power - used power in work: about 60-65% : 44

BD PLAST NON-STOP SCREENCHANGER, Machine reconditioned Screen Ø 300 mm, suitable for 160 - 180 mm extruders, Heating capacity approx. 25 kW N. 4 heating areas Hydraulic pack., Machine offered reconditioned, complete with Users manual, CE compliance, el.drawings, installed power - used power in work: about 60-65% : 25

Chip Conveyor, Chip Conveyor Belt, Coolant Cleaning, Chip Disposal, Scraper Conveyor, Scraper Conveyor, Chip Chain Conveyor, Hinge Belt Conveyor, Scraper Belt Conveyor – Subject to change – Manufacturer: RUEZ GmbH Type: Chip Conveyor, Scraper Conveyor Year of Make: 2002 TYPE: KF0WW2/306 DAS Conveyor belt width: 310 mm -Outlet height: 1300 mm -Total dimensions: L:4.370/W310/H1.820 mm -Total weight: approx. 800 kg Drive: Manufacturer: Getriebefabrik Cowig GmbH TYPE: SSMAH63 11-362.7 B3 TYPE: Worm Gear Specifications: Gear ratio(s2): 3.82 min-1. Torque (T): 337 Nm. Weight (m): 28 kg

2025 BIG backhoe bucket 30cm with MS03 Symblock attachment, Technical specifications:, - Weight: 104 kg, - Recording width: 30 cm, - Contents: 90 liters, - CAT 4 - suitable for 4 - 5.5 t excavators

2025 BIG backhoe bucket 30cm with MAR03 attachment, Technical specifications:, - Weight: 61kg, - Recording width: 30 cm, - Contents: 57 liters, - CAT 3 - suitable for 2.8 - 3.9 t excavators

Batch mixer with a gross volume of 300 l. (max. usable filling: approx. 200 l.), part in contact with the product in stainless steel V4A, centrifuge equipped with ploughshares, drive via geared motor with 7.3 kW (pole-switchable for 2 speeds), equipped with a cutter head with 4.0 kW (speed approx. 3,000 rpm). Incl. push-button control cabinet and base; Outlet flap manually operated. All tools in very good wear condition.

wird mit neuem VakuumTransportband ausgeliefert. - Producer Fladder - Type Gyro 300 VAC - Working width 1300 mm - Year of construction 1994 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

with two vacuum fans - Producer Fladder - Type Gyro 300 VAC-2 - Working width 1300 mm - Year of construction 1997 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - With sound insulating cabinet - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50