136,444 used machines on RESALE, but how to find them? Machine Search
MÜGA high-speed drilling-milling centre TYPE: S 3030 with 2-fold pallet changer incl. chip conveyor (similar to FANUC or BROTHER) Control: MITSUBISHI M70 Travel: X/Y/Z: 300 x 250 x 250 mm Spindle speed: 60 – 10,000 rpm. Motor power: 100//30% ED 2.2/3.7 kW Star turret: 12-speed Tool change time: 1.6 sec. Chip-to-chip time: 2.5 sec. Tool holder: BT 30 - 45° 2-fold pallet table: LxW: 400 x 250 mm Chip conveyor ejecting backwards Rapid traverse: X/Y/Z: 48/48/60 m/min. Installation area: L x W x H: 2690 x 1570 x 2370 mm Weight: 3300 kg Total connected load: 11.5 kW Description: The machine is suitable due to the 2-fold pallet system, as well as the high rapid traverses and fast chip-to-chip time for series part production. From 2011 to 2020, it was used in single-shift operation exclusively for ALU machining. There is no hour meter. The machine is still un ...
Key data: 3000 , 702 , 60
Presse à injecter ENGEL 300 T Type : VICTORY 1800 / 300 POWER Année de fabrication : 2008 En bon état de fonctionnement Force de fermeture : 3000 KN / 300 T Diamètre vis : 60 mm Volume injectable : 763 cm3 Poids de l’injection en PS : 702 gr Pression d’injection : 1960 bars Vitesse d’injection : 284 cm3/s Course ouverture moule max : 900 mm Epaisseur min moule : 400 mm Dimensions des plateaux : 1100 x 1100 mm Nombre de litres d’huile : 870 L Dimensions : 7,2 x 2,0 x 2,50 m Poids machine : 20 000 kg
A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible.
: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m Unused display machine 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In add ...
An AVT flat film packaging machine including an angled conveyor belt is available. Film type: PE/PP, film width range: 120mm-600mm, film thickness range: 40µm-200µm, machine dimensions X/Y: approx. 1400mm/1400mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible.
Height=2.1 m, Overall length= 1.35 m, Overall width= 1.8 m, Net weight= 1353 kg,
Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.
Stock# UG6390 Used stainless steel ribbon mixer by Młynpol (PL) model MP-3000. Mixer has volume 3000 l. Mixing shaft has welded double ribbon, and is driven via gearbox and el motor 22 kW. Central discharge outlet with pneumatically operated slide valve. Mixer is equipped with two hi-intensity agitators/choppers, each working with rotation 920 rpm. Top open, with hinged lid. Mixer mounted on stainless steel supporting frame. Shipping dimensions: L 510 cm x W 134 cm x H 195 cm x weight approx 2700 kg. Last time machine had been working in food industry.
used
Max workpiece size 1030x800x350 mm Table size 950x630 mm Can be inspected under power
Control: Siemens 840 D weight of the machine ca.: 13,5 t dimensions of the machine ca.: 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0600 mm : 300 mm : 382 mm : 700x340 mm : 355x38x127 mm : 2400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel: X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Max. dimensions sheet metal (mm) 3048×1524 Control: Sinumerik 840D SL Power of laser: 2000W Max. sheet thickness: steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm with loading and unloading system for the sheet metal
Blowing machine Krones Contiform 308 year of manufacturing: 2015 capacity: 18.000 bph neck size: PCO 28 - 1881 only 20.000 working hours with preform feeding system and chiller immediately available in Germany
Rumed Type 3300 Refrigerated Incubator • Manufacturer: Rubarth Apparate GmbH, Laatzen (Germany) • Type: 3300 • Serial number: 72258.4 • Year of construction: 1996 • Power: 1.0 kW • Operating voltage: 230 V / 50 Hz • Current consumption: 4.4 A • Refrigerant: R134a • Filling weight: 0.99 kg •Ab. Operating overpressure: 18 bar • Made in Europe, CE marked Description & Areas of Application: The RUMED Type 3300 is a professional cooled incubator for laboratory applications. Ideal for: • Microbiological cultivations • Long-term storage of samples • Air-conditioned stability tests • Research and development Dimensions inside: W/D/H: 575/550/510 mm Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and u ...
Emhart TUCKER ETF50R.00.70/5.12-30F7 Stud Welder Technical details: Manufacturer: Emhart Teknologies (TUCKER GmbH) Model / Type: ETT50R.00.70/5.12-30F7 Item number: T045 001/400 Voltage: 400 V, 50/60 Hz Make: Made in Germany Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
Manufacturer: Rübenach Dimensions: 300 x 150 cm Condition: used Location: Bremen
Casting plate / marking plate Location: Bremen Material: Cast Iron Dimensions: 300 x 150 cm Application: Precision and measuring work in machine and tool construction Features: high dimensional stability, flat surface, suitable for scribing, testing and aligning workpieces
Reference Num.: 4278 Brand: Theisen Bonitz Type: tb sprint B318 VP + 304 QSM Construction year: 2008 Available: directly Status: In production Location: Deutschland Equipment: - 18 Stationen - Heft-, Falz-, Schneideaggregat tb sprint 304 QSM
Lippert belt conveyor GF 3050-750-600 RA1694 Technical data: Conveying length (NL): 3050 mm Framework width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 3050 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...
Ref. no.: 18092 Manufacturer: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil fe ...
screw ø:: 30 mm screw length:: 16D screw speedl:: -- U/min Condition: used, Specification: Extruder - used - screw diameter: 30 mm - screw length: L = 16 D - with feed roller - Extruder water tempered, - Cylinder and head one tempering zone - Feed section can be cooled or heated - Flow rate adjustable - Screw compression approx.: 1:1.2 - Spraying head for hoses and profiles - Various injection moulds are available - Extruder complete incl.: - Motor from Techno Drives, type: MD 321 MA Drive power: 5 kW, 360 V Motor current max.: 19.7 A N/max.: 1,750 rpm - Control cabinet mounted directly next to the extruder - Profile/tube extrusion head with clamp - Temperature control Extruder is mounted on a base plate - Mass pressure measurement and display available - Operating and display elements are installed in the switch cabinet - Mobile version ...
Tip height: 355 mm Center width: 3000 mm large circulation Ø over bed/recess/bed slide: 715/790/520 mm Spindle bore: 86 mm Spindle holder according to DIN 55027: Gr. 11 Tailstock quill taper: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/flat: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitwort Thread: 2 - 28 Gg 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 Diametrical Pitch Threads: 8 - 112 DP Drive motor, pole-switchable: 380 V, 7/11 kW Weight approx.: 7 t Approx. space requirement: 6000 x 2300 mm
Key data: 4000 , 1464 , 80
Screw diameter: 80 mm Injectable volume: 1678 cm3 Injectable weight: 1464 g Injection pressure: 1856 bar Column passage: 800 x 800 mm Opening stroke: 1020 mm
Manufacturer: HACO Model: PPM 30150 Year of Manufacture: 2007 Voltage: 380V 50Hz Capacity : 3000 x 150T Find more here - .ucymachines/ Contact us at - sales@ucymachines
Zayer 30KCU700AR (2003) with Heidenhain iTNC 530. - x, y, z = 7000, 2000, 1250 - CTS 15 bar - Controlled milling head (position accuracy 0.001) - 60 tools - 37 kW spindle motor - Rapid traverse 20/10 m/min - 4500 rpm - ISO50 - Renishaw RPM60 -Conveyor - Additional milling head (replacement)
Planetary Gearbox PCEF53.5-X1 New For Doppstadt DW2560B, DW3060 standard, mobile & stationary Not suitable for Biopower models (42 teeth on the roller)! Fully assembled with output flange and driver
Batch mixers, used Manufacturer : Drais Volume : 300 ltr. Material : Areas in contact with the product in stainless steel Spur gearbox drive : 7.5 KW; Other equipment : - 1 x cutter head with air flushing, drive : 4 KW; - Control cabinet, incl. frequency converter, as well as with all necessary switching and protective devices; - Circuit diagrams available.
Vacuum pump, Maximum flow: 2.0 m3/h, Limit empty: 2 mbar , Engine power: 0.16 kW , Max flow: 2.0 m3/h, Link to manufacturer: shop.vacuubrand/fr/groupe-de-pompage-vario-chimie-pc-3001-variopro-vp- 58.html?_gl=1z327z1_upMQ..&gclid=Cj0KCQjwv7O0BhDwARIsAC0sjWNgJFYzk804i 83FsvmvE6pdlCfxBV9T2HenFLlzgew3vJwq7OJokRkaAmfdEALw_wcB#product-info-u nit-table, Limit void: 2 mbar , : 0.16kW
Aufschnittmaschine / Slicer GRAEF MASTER 3020 Specifications: 230 Volt / 50 Hz / 2.2 A / 500 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 300 mm Stainless steel knife incl. grinder Luminous flux Machine with CERA 3 coating Weight: 37 kg External dimensions (L/W/H): 500 x 600 x 420 mm Cutting size: L 260 x H 195 mm Cutting thickness 0 – 24 mm Carriage dimensions: L 260 x W 300 mm Installation area: L 540 x W 440 mm External dimensions: L 600 x W 570 x H 420 mm Working area: L 680 x W 720 x H 570 mm Knife speed: 230 rpm with weighing function up to 0 - 5,000 g (not legal-for-trade) Year of manufacture: 2018 Function checked, machine ready for immediate use! RRP: EUR 5,057.50 Condition, see original pictures! If you have any questions, email or call.
An Alfa Naval disc stack centrifuge module for separating foreign oil from water-based coolants is available. Speed: 7500rpm, throughput with water-based coolant: approx. 480l/h, max. medium temperature: 70°C. Machine dimensions X/Y/Z: approx. 650mm/550mm/1200mm, weight: approx. 60kg. An on-site inspection is possible.
Cutter Manufacturer: Kilia Stainless steel Capacity of the bowl: 50 liters 6 knives
B&A REF: 9222 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 2 MOTOR: 11 HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC
Earth drill 200 mm TBG-300 (8 mm thickness), suitable for Jansen HBG-2000 earth drill, photo is an example photo!
Earth drill 200 mm TBG-300 (8 mm thickness), suitable for Jansen HBG-2000 earth drill, photo is an example photo!
Auger 300 mm TBG-300 (8 mm thickness), suitable for Jansen HBG-2000 auger
Original Kinshofer - Lehnhoff backhoe bucket, 30cm working width with MS01 mount, as new, suitable for Yanmar SV16/18, suitable for 1-2t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.
Häner hydraulic hammer HX 600SA, Technical specifications:, Construction year: 2025, Oil/min: 20-35 l/min, mass: 120kg, Operating pressure/bar: 88-117 bar
Make: CARRIER Type: 30AWH016H-9 Power: 16kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging
Make: CARRIER Type: 30AWH008H Power: 8kW Weight: 120kg Single-phase 230V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging
Make: CARRIER Type: 30AWH012HD9 Power: 12kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging
Make: CARRIER Type: 30AWH015HD9 Power: 15kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging
Pressta Eisele Panto 300 copy milling machine - Very good condition - With frequency converter and HF motors - With stop system
Bending capacity: 3/8"-2" Bending angle: 180° Angle turret: 6-fold Mounted bending tool: Ø 28 mm Country of origin: Netherlands Motor power: 3 kW Machine weight: 250 kg Machine LxWxH: 1,000 x 800 x 950 mm
Injection moulding machine for PET preforms
Clamping Force: 300 ton // Shot Weight (Max): 476 g
maximum number of results exceeded
please refine your search
