rs 30 used for sale

Load Weight Shelf: 12000 kg Loading weight per level: 2000 kg Number of load levels: 6 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,8 x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 2000 Kg Magnetic field: mm weight: 80 Kg dimensions: 0,5 x 0,25 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 240 mm : saw band length: 2965 x 27 x 0,9 mm table height: mm band speed: 37 / 76 m/min total power requirement: 1,0 kW weight of the machine ca.: 0,38 t dimensions of the machine ca.: 1,0 x 1,6 x 1,4 m double miter band saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 880 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,84 t dimensions of the machine ca.: 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to ente ...

welding current: max. 300 A open-circuit voltage: 55 - 76 V connected load frequency: 400 V weight: 150 kg Dimensions (LxWxH): 900 x 400 x 900 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 620 300 mm no. of flutes: 6 groove width: 14 mm total power requirement: 0 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 3000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 95 kg length in width: 620 mm length in total: 3000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC TXP-200 FA turning diameter: 360 mm swing over bed: 600 mm swing diameter over bed slide: 450 mm turning length: 683 mm c-axis: indexing: 0.001 ° turning speeds: -3000 U/min tool taper: VDI 40 Top turret tool hodler:: 12 tailstock quill taper MT: 5 quill travel: 100 mm feed: 1-10 m/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min Overall size: 4450x2100x2350 mm weight of the machine ca.: 7200 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: external data input station for use with Vollmer ND brand saw blade handling systems. Serves for individual input of the various processing steps of a saw blade. The data input station with integrated router takes over the interface between the machines, to the customers own server or PC

bar material dia.: 5 - 65 mm Bar length: 3000 mm feed length: max. 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m serial-no.: 32 - 201 588 Loading magazine with lower storage area from which the bars are lifted into the Feed tube can be lifted Rod diameter 5 - 65 mm Feed force infinitely variable max. 550N Insertion speed 335 mm/sec feed speed 335 mm/sec Return speed 335 mm/sec Loading time for 3000 mm bars: 30 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KOPPENS MACHINEFABRIEK BV FRYER, TYPE BRN 3000/700 Technical features: Machine number: BRN 3000/700-994 Voltage / frequency: 380v, 3 ph, 50hz, 23.09 a, 9.7 kw Weight: 2940 kg Heated by thermal oil Prepared with fire extinguisher system S/s mesh belt, belt width: 700 mm Total dimensions: 6500mm x 1800mm x 2380mm

Very large linear weigher for high volume weighing with 2 heads. - Specifications: weighing range: 3-30kg | max. speed of the machine in neutral: 20 cycles/minute | accuracy: 0.2% (depending on product) | power: 2.0kW, machine dimensions: L3100xW2800xH3600mm (including 1400mm standing frame/can be customized) | weight: 1200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

A system for the mechanical separation of meat and bones, tendons or hides is available. Throughput capacity: approx. 3t/h, filling volume: 800l, working filling capacity: 80%-95%. Machine dimensions X/Y/Z: approx. 2300mm/1800mm/2100mm, weight: approx. 2300kg, control: Siemens Simatic, operating hours: 7504h. Tools included. Documentation available. On-site inspection is possible. Expected to be available from August 2025.

High-speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. External tube feed lift, water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lif ...

Offer 24587 Specifications: - Electrostatic filter with indicator light - Extracted and purified air is returned to the working area - Wall-mounted design with two articulated extraction arm - Articulated suction arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter area 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 80 cycles/min ...

Complete sample system for a water production plant to do 3.000 cycles per hour. Including Blow Molding Machine (with 4-cavity blow molding machine, air compressor, air dryer group, chiller, blow mould), Bottle Feeding Table, Automatic Rinsing/Filling/Capping Machine, Cap Feeding Machine, Lamp Inspection Box, Drying Device, Automatic Label Shrinker Machine, Code Spraying Machine, Automatic Wrapping Machine, Conveyor System. Way of production: Bottle blowing > bottle rinsing > bottle filling > bottle capping > lamp inspection > labelling > thermo shrinking > code spraying > wrapping. - Specifications: 3000 cycles/h (at 500ml) | bottle volume: 350-1500ml | PET bottles | standard 28/30mm PET caps | 1500 liter of water filling /hour | 500 liter of water for rinsing per hour, gravity filliing, 24 bottles in a multipack. - Specification depending on final layout and customized combination of m ...

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 5-3000g | filling hopper capacity: 50 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1.4kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 3000-4000kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 60L/min | power supply: 220V | power consumption: 7.5kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 300-800kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 20L/min | power supply: 220V | power consumption: 3kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Tumbler with cooling system Manufacturer: Gunther Model: GPA 300K Made of stainless steel Volume: 300 liters Capacity: 200kg Dimensions: 1950x1000x2100mm Electric power: 2.5kW

SANDRETTO série 9 1300/3000 Force de serrage : 300 T - 3000 KN Distance entre les barres d'attache : 570 X 570 mm Dimension du plateau : 860 X 860 mm Epaisseur du moule min / max : 210 - 730 mm Ouverture du moule : 630 mm Volume injectable : 658 cm3 Pression sur le matériau : 1985 bars Diamètre de la vis : 55 mm Puissance totale de la machine : 53,7 KW Rapport L/D : 20 Poids : 11 000 kg Dimensions : 7,04 x 2,22 x 1,82 m

MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag ...

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: Ral 5015 blue Frame profile: PLFB 13 Profile dimensions: P 85 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 3,300 mm Depth: 800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

turning diameter: 720 mm turning length: 3.000 mm control: FAGOR 8055 TC/B turning diameter over bed: 470 mm spindle bore: 92 mm spindle nose: DIN-55027-11 spindle diameter: 150 mm spindle drive: 17 / 20,5 kW total power requirement: 28 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm

SPECIFICATIONS: Saw blade: Ø 300 mm Installed power: 2.5 HP Voltage: 380 V EQUIPMENT: 01 Workbench

: 30 mm : 30 mm flat steel: 50 x 10 mm L-beam: mm Axis diameter: 30 mm work speed: 6,0 U/min roll diameter -toolpieces: 132 mm total power requirement: 0,75 kW weight of the machine ca.: 0,25 Kg dimensions of the machine ca.: 0,6 x 0,8 x 1,3 m Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Feed length: 1970 mm Working width: 230 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Direct drive / cardan (0.25 kW x 3 motors) Speed: 6000 rpm Installed power: 22.9 kW Voltage: 380 V Spindle configuration: I Bottom (4 kW) II Right - Left (7.5 kW), Left equipped with electronic control III Top (5.5 kW) equipped with electronic control IV Bottom (4 kW) EQUIPMENT: Complete with tools

Inv. Num. : 7215 Type: ENSIS 3015 AJ Producer: AMADA Created: 2021 Parameters: Laser ON: 9348 h Beam ON: 7276 h Laser power: 6 kW Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg

For sale: AXA VSC 1 3000 M Vertical CNC machining center built in 1986 For sale is a vertical CNC machining center of the type AXA VSC 1 3000 M from 1986. The machine is designed for the precise machining of medium-sized to large workpieces and is suitable for both single part production and series production. It is characterised by its robust design, stable travelling column structure and reliable control technology. Specifications Travel X Y Z approx. 1820 mm 450 mm 480 mm Table size approx. 1900 x 450 mm Spindle speed up to approx. 8000 revolutions per minute Machine weight approx. 5500 kg Construction of the travelling column with fixed machine table Cooling Internal Cooling IKZ with Chip Conveyor Condition: used, functional, ready to be demonstrated, energized Particularities Solid machine design ideal for precise roughing and finishing Good access to the worksp ...

Inv. Num. : 8465 Type: SP-300x4C Producer: Prochera Created: 2015 Parameters: Max. speed: 1500 1/min Working feed: 0-23 m/min Max. width: 300 mm Max. height: 100 mm Number of brushes: 4 Weight: 1500 kg Equipment: Replacement brushes

The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.

Name: Hydraulic Power Unit with Electric Motor and Oil Tank Manufacturer: HYDAC (engine by Elprom S.R.L.) Type: 80C4 3030923 Short Description: Compact hydraulic power unit consisting of an electric motor from Elprom (type 80C4), mounted on a HYDAC oil tank with integrated hydraulic block. Suitable for hydraulic applications in machine tools or industrial plants. Power: 1.1-1.3 kW at 230/400 V, 50 Hz. IP54 rating.

Name: AC Servo Motor Manufacturer: FANUC (Japan) Type: Model αM9/3000, A06B-0163-B010#0001 Country: Japan Short description: FANUC model αM9/3000 compact AC servo motor with a rated power of 1.8 kW, 3000 rpm, voltage 161 V, 3-phase, with integrated encoder. Typical black housing body with red junction box. Robust design for industrial CNC machines. Used condition, mechanically in order, with visible signs of wear

Name: AC Servo Motor Manufacturer: FANUC (Japan) Type: Model αM6/3000, A06B-0162-B110#0001 Country: Japan Short description: FANUC model αM6/3000 compact AC servo motor with a nominal power of 1.4 kW, 3000 rpm, voltage 144 V, 3-phase, with integrated encoder. Typical black housing body with red junction box. Robust design for industrial CNC machines. Used condition, mechanically in order, with visible signs of wear. Price excludes VAT.

max. dia. of grinding wheel: 300 mm wheel width max: 40 mm grinding spindle speed: 1500 U/min engine output: 1,1 kW Industrial double grinder Very quiet, low-vibration operation With two high-grade corundum discs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plongee automatic hydraulics, Refrigeration equipment, Plongees knife, Cymbal grinder, OPTIONAL: Lead-in grinder, CNC, Fairing, Gearbox elimination and Adaptation of speed variator for drag wheel, Automatic centralized lubrication, 1 Year Warranty / Plongee automatic hydraulic, refrigeration equipmentPorta plongee rules, Saucers wheel holder, OPTION: Porta rules enfilade, cnc, protection, eliminating gearbox and variable speed adjustment for wheel drive, 1 year warranty, Ø grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min / max to grinding: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel speed nº: infinite, Control type ((cnc / manual): Manual, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Maximum infeed grinding length: 125 mm, Motor power grinding whee ...

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 325x175x125mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 325x175x125mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Angle of inclination of the drive wheel head: -2/+5º, Angle of inclination of the working grinding head: +/- 5º, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 Kg

, Ø grinding wheel dimensions (od x id x width): 325 x 175 x 125 mmm, Ø min / max to grinding: 1.5 / 50 mm, Regulating wheel width: 220 x 125 x 125 mm, Infeed (auto / manual): Auto 125 mm max., Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Maximum infeed grinding length: 125 mm, Motor power grinding wheelhead: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, High: 1.260 mm, Weight: 1,600 Kg., Accessories included:

This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details.

Ø grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min / max to grinding: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel speed nº: infinite, Dressing (auto / manual): 1.5 / 50 mm, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Maximum infeed grinding length: 125 mm, Motor power grinding wheelhead: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, High: 1.260 mm, Weight: 1,600 Kg., Accessories included:

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Angle of inclination of the drive wheel head: -2/+5º, Angle of inclination of the working grinding head: +/- 5º, Long: 1.520 mm, Width: 1.020 mm, High: 1.260 mm, Weight: 1.550 Kg

Ø grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min / max to grinding: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel speed nº: infinite, Lubrication (auto / manual): Manual, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc axes nº: 2, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Maximum infeed grinding length: 125 mm, Motor power grinding wheelhead: 7,5 Kw, Voltage: 220 / 380v, Long: 1.520 mm, Width: 1.020 mm, High: 1.260 mm, Weight: 1,600 Kg., Accessories included: Working wheel head with bearings, grinding wheel holder, drive wheel with frequency inverter, / grinding wheel head with bearings, infeed workrest

Hydraulic automatic plongee, plongee bowler, grinders, OPTIONAL: lead, CNC, fairing, gearbox elimination and speed variator adaptation for drag wheel, automatic centralized lubrication, 1 Year Warranty / Plongee automatic hydraulic, Porta plongee rules, Saucers wheel holder, OPTION: Porta rules enfilade, cnc, protection, eliminating gearbox and variable speed adjustment for wheel drive, 1 year warranty, Grinding wheel gap : 1.5 / 50 mm, Max.width of wheel in feed grinding : 125 mm, Working wheel dimensions (od x id x width) : 325 x 175 x 125 mm, Øext.min. working wheel : 220 mm, Max. profile depth of the working wheel: 8 mm, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width) : 220 x 125 x 125 mm, Øext.min. driving wheel : 165 mm, Working wheel motor power : 7,5 Kw, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding he ...

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Infeed (auto/manual): Automatic, Dimensions of the regulating wheel (OD x ID x W): 220 x 125 x 125 mm, Long: 1.520 mm, Grinding wheel width: 125 mm, Maximum length to be rectified in plongeé: 125 mm, Grinding wheel head motor power: 7,5 Kw, Length: 1.520 mm, Width: 1.020 mm, Height: 1.260 mm, Weight: 1,600 Kg.

Portoner of plongee, Cymbals portaamuelas, CNC FANUC, Centralized automatic grease OPTIONAL: Portarrels of enfilada, Fairing, Removal of gearbox and adaptation of variator speed for drag wheel, 1 Year Warranty / Porta plongee rules, Saucers wheel holder , CNC FANUC, Automatic lubrication system. OPTION: Porta rules enfilade, protection, eliminating gearbox and variable speed adjustment for wheel drive, 1 year warranty, Ø grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min / max to grinding: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel speed nº: infinite, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Maximum infeed grinding length: 125 mm, Motor power grinding wheelhead: 7,5 Kw, Lo ...

Grinding wheel gap : 1.5 / 50 mm, Max.width of wheel in feed grinding : 125 mm, Grinding wheel dimensions (od x id x width) : 325 x 175 x 125 mm, Grinding wheel Ø ext.min. : 220 mm, Max. profile depth of the grinding wheel: 8 mm, Lubrication (auto / manual): Automatic , Infeed (auto / manual): Automatic , Regulating wheel dimensions (od x id x width) : 220 x 125 x 125 mm, Regulating wheel Ø ext.min.: 165 mm, Grinding wheel motor power : 7,5 Kw, Regulating wheel motor power: 0,75Kw, Length: 1.520 mm, Width: 1.020 mm, Height: 1.260 mm, Weight: 1.550 Kg., Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º, Accessories included: Infeed workpiece feeder, hydraulic Infeed, diamond dressing compensator, SIEMENS PLC