127,247 used machines on RESALE, but how to find them? Machine Search
Proportional pressure control valve, R901344934, ZDREE6VP4-….; Rexroth, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - Comes from a spare parts warehouse of a certified production facility, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
The T 4.40 DSK is an oil-free combined pressure/vacuum pump for blowing and suction air. It is a robust and durable pump that is designed for continuous operation. This dry-running positive displacement pump works with self-lubricating gate valves made of a graphite composite and requires minimal maintenance. Volume flow 50 Hz 35 m³/h Pressure/vacuum relative 50 Hz ±0.6 bar Power 50 Hz 1.85 kW Sound level 50 Hz 68 dB(A) Volume flow 60 Hz 43 m³/h Pressure/vacuum relative 60 Hz ±0.6 bar Power 60 Hz 2.2 kW Sound level 60 Hz 68 dB(A) Weight 46... 49.5 kg with motor
Semi-automatic ceramic press for the production of round green bodies (= unfired mouldings) made of clay and other extruded masses, e.g. caps, vases, pots, tubes, tubes, etc. Part diameters from 90 mm to 350 mm are possible, max. part height: 350 mm. Output: Up to 300 cycles per hour. The system consists of: feeding device, cutter, press, lubrication device, discharge device, control cabinet with control panel and hydraulic power unit. Connected load of the entire system: 15.8 kW.
Vacuum extrusion press 'UNIVERSA' PZG 40-40a with 400 mm Ø and 18.5 kW drive (expandable up to 55 kW). Maximum pressing pressure: 30 bar. Extruder incl. PZSVG 35a pre-press with 15 kW drive. Includes base frame with motor clamping device. In regularly serviced condition; last revision in 2022. Previous use: Production of ceramic roof tiles. Available for an extra charge: vacuum generator and various mouthpieces.
Pressing force: max. 630 tons. Installation height: 375 mm Stroke: 275 mm Weight: 4,500 kg.
Press force: 1,250 tons. Clear width: 585 mm Installation height: max. 480 mm Piston stroke: max. 355 mm Weight: 7,200 kg.
A used dough dividing and rounding machine WP Werner & Pfleiderer Lebensmitteltechnik Rotamat EN is currently for sale and immediately available in our warehouse in Bielefeld. W&P Rotamat EN Dough dividing and knitting machine Roll press Bj.2008 - Dough dividing and rounding machine for dividing and rounding dough into 30 parts - Weight range per division: 30 grams - 70 grams - 30 pieces - with plastic knife - Including 3 plastic knitting plates - One-handed operation Technical data: - 400 V / 1.6 kW - Weight approx. 410 kg - Year of construction 2008 - Outer dimensions approx: width 69cm Depth: 65cm height 150cm
Thermoforming press Jochnick & Norrmans 150/ton upper cylinder 100 Ton Lower Cylinder Table 1000x1000mm Built in 1973 New electrical cabinet in 1998 With light screen and wiring diagram Now in stock Price is freely loaded
CONTROLS PLC SIEMENS S5 95U PRESS DESIGN drive system: hydraulic frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 table cushion: yes PRESS FORCES total force (nominal): 650 to PRESS TABLE table surface (left-right): 3000 mm table surface (front-back): 1800 mm SLIDE slide force: 630 to table surface (left-right): 3000 mm table surface (front-back): 1800 mm stroke: 1000 mm SLIDE (HYDR. PRESS) approximation velocity max.: 200 mm/s working velocity min.: 7 mm/s working velocity max.: 15 mm/s return velocity max.: 120 mm/s return force: 65 to DIE CUSHION (TABLE CUSHION) cushion force: 250 to stroke: 400 mm cushion plate surface (left-right): 2500 mm cushion plate surface (front-back): 1450 mm working principle: hydraulical TOOL ASSEMBLY DIMENSIONS distance tab ...
De DIAVITE DT-15 is een ruwheids- en oppervlaktemetingsinstrument uit de DIAVITE-serie, gebruikt om de oppervlaktekwaliteit van materialen te bepalen in industriële metrologie-toepassingen. Het registreert ruheidsparameters via een stylus/probe en wordt vooral tweedehands aangeboden, omdat nieuwere modellen recentere technologie bevatten.
400 Ton Hydromec HF4000 Non-Ferrous Hot Forging Press Line MANUFACTURER – HYDROMEC YEAR – 2000 SERIAL NUMBER – 660 MODEL – HF4000 C/D MATERIAL – NON-FERROUS TONNAGE – 400 TON (4000 KN) STROKE – 380MM STROKE PER MINUTE (CONTINUOUS) – 22-35 STROKE PER MINUTE (SINGLE STROKE) – 22-45 RAM ADJUSTMENT RANGE – 100MM CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) – 865MM SIZE OF TOOL MOUNTING PLATE – 1000MM X 1000MM MAIN PRESS MOTOR – 59 KW MAIN MOTOR RAM ADJUSTMENT – 2.2 KW CUSHION FORCE – 70 TON (700 KN) CUSHION STROKE – 40 – 110MM INCLUDES: AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS ELECTRICS PRESS CONTROLS VIRTUAL WALK Combination Lot of the following: Lot No. O233 MAESTRI Gas ...
Manufacturer: Manroland Model: 200 E Hi Print Year of Manufacture: 2008 Total Impressions: 17,000,000 Operating hours : 15372 Find more here - / Contact us at -
RÖCHER conversion 1991 (formerly SCHÖN) Pressure capacity 1,600 kN Plunger stroke160 mm Table dimensions 850 x 650 mm Light barrier control next due exam February 26 Tenon clamp lock in the ram Express lowering speed 274 mm/s Working speed 20/10 mm/s Return speed 273 mm/s Drive power 30 kW Operating voltage 380 volts/50 Hz Fuse max. 100 A
Machine name: Filter press used Manufacturer: JKF Kübler Type: KFP 800-40-25K-OA-AU/LG-2 Year of Make: 2017 Design: Side-spar press Press capacity: 470 liters Procedure: Open Filter area: 41.7 m2 Plate format: 800 x 800 mm Number of plates: 41 Panel material: Polypropylene Plate Conveyor: Automatic Cake thickness: 25 mm Closing pressure: 360 bar Dimensions: L 4303 x W 1700 x H 2110 mm Curb weight: 4830 kg Tech. Documentation: Yes Remark: It has been used in electroplating. Accessories: A control cabinet, a control cabinet, a hydraulic system, piston pump, drip plates. Condition: Used Price: On request
CONTROLS PLC SIEMENS S5 95U PRESS DESIGN drive system: hydraulic openings in uprights: yes PRESS FORCES total force (nominal): 350 to PRESS TABLE table surface (left-right): 1600 mm table surface (front-back): 1400 mm SLIDE stroke: 1200 mm SLIDE (HYDR. PRESS) approximation velocity max.: 250 mm/s working velocity min.: 14 mm/s working velocity max.: 50 mm/s TOOL ASSEMBLY DIMENSIONS distance table - slide max.: 1250 mm distance between columns (H-frame): 1650 mm passline opening (free passage in side columns): 630 mm ELECTRICAL SPECIFICATIONS total power consumption: 60 kW DIMENSIONS / WEIGHTS height above floor level: 4300 mm height under floor level: 1000 mm total weight approx.: 24000 kg ATTACHMENTS (PRESSES) European CE standards: yes
A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible.
pressure: 160 t chamfer lenght: 3000 mm distance between columns: 2650 mm Control: Cybelec DNC 800 total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PRESS DESIGN drive system: hydraulic frame design: C-frame, single sided table cushion: yes opening in table: yes PRESS FORCES total force (nominal): 100 to PRESS TABLE table surface (left-right): 710 mm table surface (front-back): 560 mm SLIDE slide force: 100 to table surface (left-right): 560 mm table surface (front-back): 450 mm spigot hole diameter: 50 mm stroke: 320 mm thickness of bolster plate: 150 mm SLIDE (HYDR. PRESS) approximation velocity max.: 340 mm/s working velocity max.: 32 mm/s return velocity max.: 330 mm/s SLIDE EJECTOR / CUSHION nominal force: 2 to stroke: 40 mm DIE CUSHION (TABLE CUSHION) cushion force: 10 to stroke: 80 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 455 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 300 mm sheet t ...
A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible.
pressure: 20 t weight of the machine ca.: 590 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: hydraulic quick die change system: yes feedstock transport direction: right to left SLIDE total force (nominal): 400 to stroke: 200 mm COUNTER RAM nominal force: 100 to stroke: 30 mm V-RING nominal force: 200 to stroke: 30 mm TOOL DIMENSIONS lower table (left-right): 650 mm lower table (front-back): 650 mm shut height max.: 420 mm passline opening (free passage in side columns): 420 mm OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 12 mm feed velocity max.: 30 m/min feedstock transport direction: right to left LEVELLER UNIT sheet width max.: 500 mm sheet width (min): 60 mm sheet thickness max.: 12 mm sheet thickness min.: 1 mm integrated feed function: yes STRIP-FEEDER sheet width max.: 400 mm sheet ...
used
4 assen: Y1 / Y2 / X / V Laserbeveiliging voor en achter Capacity: 250 ton x 4100 mm Backgauge: CNC Control: Cadman Touch-B Passage between uprights: 3150 mm Max stroke: 250 mm Max distance between table -- ram: 500 mm Depth of throat: 350 mm Table width: 250 mm Locking speed: 80 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 30 kW Length: 5545 mm Depth: 1990 mm Height: 3380 mm Weight: 23 ton
mechanical briquetting press Brikmatic Mod 1/75-150 Net weight approx. 5 ton Output up to approx. 1250 kg/h Diameter briquette D 75-78 mm Power main motor 55 kw Year of manufacture 2005
Panel size: 1350 x 3000 mm Pressing capacity: 90 ton Plate Type: Hard Aluminum Plates Travel+opening 400mm Cylinders 6 pieces Electric boiler 18 KW V400/50 Ce version Myler protective film for an easy Fast and efficient cleaning of the press surface All-round tension via spring system of the Myler protective film
High-Pressure Waterjet Trailer, wp 2,800 bar / 28 lpm YoM 2023 For sale is a very well maintained high-pressure waterjet trailer unit with extremely low operating hours. The machine is in excellent technical and visual condition and ready for immediate use. Powered by a Volvo diesel engine (160 kW), the unit delivers 2,800 bar at 28 lpm, making it ideal for demanding industrial and waterjet cleaning applications. With only approx. 185 operating hours, the unit is close to new. The trailer comes including accessories and is fully operational – no additional investment required. Inspection and test run possible.
Panel dimensions: 1350 x 3500 mm Pressing power: 120 ton Plate Type: Hard Aluminum Plates Travel+opening 400mm Cylinder 8 pieces Electric boiler 18 KW V400/50 Ce version Myler protective film for an easy Fast and efficient cleaning of the press surface All-round tension via spring system of the Myler protective film
Laboratory press for test plates, make RUCKS, built in 1998, 2 floors electrically heated, Press force 440 kN, max operating pressure 250 bar
Huber WAP (wash press) fully functional incl. control. Material: Stainless steel housing Screw press with perforated screen basket. Application: Treatment of screenings / screenings. Dewatering and volume reduction. Area of application: Municipal sewage treatment plants, industrial sewage treatment plants,
CONTROLS PLC PRESS DESIGN drive system: hydraulic quick die change system: yes SLIDE total force (nominal): 450 to stroke: 230 mm SLIDE (HYDR. PRESS) working velocity min.: 5 mm/s working velocity max.: 70 mm/s return velocity max.: 200 mm/s return force: 200 to V-RING nominal force: 200 to TOOL DIMENSIONS lower table (left-right): 790 mm lower table (front-back): 760 mm OVERALL SPECIFICATIONS (COIL LINES) coil weight max.: 3 to COIL CHAIR coil weight max.: 3 to STRIP-FEEDER feeder type: roll feeder band lubrication system: yes ELECTRICAL SPECIFICATIONS total power consumption: 150 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 28400 kg including Coil Line ARKU AH 3000/300 MSG
Manufacturer: AIDA Type: NC2-160 Thrust: 160t Year of construction: approx. 1991 Stroke length: 130 mm Distance above the table: (adjustable) 235–335 mm Table: 2030 x 600 mm Plunger: 1500x600mm Electrical power: 3x200V(), 15kW - Japanese standard Net weight: 19000 kg Size: 2140 x 2210 x 3175 mm Fobmeu D Ad Ejrcu Idepb Automatic lubrication system. Automatic Cutting Oil Dosing – RAZIOL EST-02 Optionally with disc winder and straightener.
Manufacturer: AIDA Type: NC1-45 Pressure: 45t Year of manufacture: 1987.08. Stroke length: 80mm Distance over table:: (adjustable) 240-300mm Table: 810x360 Plunger: 410x340 Electrical power: 3x200V(), 5.5kW - Japanese standard Net weight: 3300 kg Size: 980 x 1480 x 2275 mm
pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 2070 kg. range L-W-H: 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery spee ...
Hydraulic press JAM HYP-505H in very good condition for sale Manufacturer: JAM Model No.: HYP-505H Year of Make: 1990 Compressive force: 50 kN (5 t) Stroke length: 150 mm Working height: 385 mm Table size: 400 × 340 mm Punching hole: Ø 25 × 60 mm Ram speed: 260 mm/s Fpobmrjwin Emecu Idjb Ram speed: 39 mm/s Plunger return speed: 360 mm/s Pressure range: 7.7 MPa Safety light barriers Two-handed operation Voltage: 3-phase, 200 V, 1.5 kW, 10 A Weight: 400 kg Operating oil: 25 litres Height (mm): 1070 Width (mm): 670 Length (mm): 1060
used bread press Fortuna Automat 3-30, overhauled, size 3, with square function, with 3 knitting plates, with new stainless steel knife, for 30 pieces, mesh no. A3-8989 E, weight of dough pieces 32 - 70 g, dough insert approx. 960 - 2,100 g, 147 cm high, 69 cm wide, 80 cm deep, weight 540 kg, 6 A, 380 V, 50 Hz
pressure: 30.0 t stroke: 200 mm table surface area: 775 x 190 mm column travel between the guideways: 775 mm ajustment speed: 7.5 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 3.0 kW weight of the machine ca.: 400 kg. dimensions of the machine ca.: 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - ...
used roll press WP / W&P / Werner & Pfleiderer Rotamat CN, overhauled, with 3 knitting plates, new electrics, newly painted, new bearings, new V-belts, for 30 pieces, approx. 900 to 2100 g dough insert, Ser. No. 215 022, 2.1 A, 380 V, 50 Hz
pressure: 60.0 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8.0 mm/sec working feed: 4.0 mm/sec return speed: 10.0 mm/sec engine output: 4.0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the s ...
KHS Innofill DRS 168/24 with 168 filling valves an 24 head crown corker capacity: up to 72.000 bph year of manufacturing: 2014 pitch: 94 mm with HDE high pressure injection with shower for broken glass fixed for 0,33 and 0,5 ltr. bottles already dismantled and available in Germany
pressure: 100 t stroke: 300 mm table surface area: 1070 x 315 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1870 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hy ...
2 used Andritz chamber filter presses, built in 2014, plate size 1500 × 2000 mm Technical data: Manufacturer: Andritz Year of Make: 2014 Figurine no.: S/E/1520/C/R/W/D/K Panel size: 1500 × 2000 mm Number of plates: 97 per press Condition: used If required, incl. accessories: - New filter cloths - Filling pumps (Netzsch, partly new) - High-pressure pump for cleaning - Andritz screw conveyors We will be happy to provide further details and an overview of the spare parts on request.
Press brake Manufacturer: AMADA PROMECAM Type: HFB 125/40 Year of Make: 1991 Control: DELEM DA 58 Press force max:. 1,250 kg Stroke max.: 180 mm Sheet thickness 8 mm Working width/passage: 3.7 m Number of phases: 3 Power consumption: 11 kw Voltage/Frequency: 380/50 Rated current: 24 Weight: 9,900 kg Availability: immediately Reference Number: L2131
CONTROLS PC controller BECKHOFF PRESS DESIGN number of slide actions: 13 SLIDE slide force: 3 to stroke: 60 mm stroke rate (max.): 210 /min SLIDE (MECHAN. PRESS) slide adjustment: 6 mm variable speed: yes stroke rate (min.): 70 /min stroke rate (max.): 210 /min main drive power: 4 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 2300 mm space requirements -front/back-: 1000 mm total height: 1900 mm total weight approx.: 4000 kg
A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible.
Press brake Ermaksan AP 3100 160 good condition Type AP 3100-160 tons Capacity 160 tons Bending length 3100 mm Motor power 11KW Lowering speed 80 mm/s. Weight 9200 KG Width 2180 mm Length 3500 mm Height 2780 mm Hfjbqxieq Ewufem Iqjb The machine can be viewed at any time by appointment.
Brand: Collin Pilot & Lab Solutions Model: P300 Presse Year of construction: 1987 Plate dimensions: 296 x 296 mm Machine nr.: 6300 22 86 Connected load: 18 kW Dimensions (LxWxH): 1.150 x 530 x 1.750 mm Weight: 650 kG
Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material
High pressure compressor LMF 40 bar Type: Eco Pet VD 1350 - B Year of manufacturing: 2003 Capacity: 1.350 m³/h Maximan pressure: 42 bar Electric power: 243 kW Working hours: approx. 35.800 h with Siemens S7 PLC and Danfoss frequency drive incl. pressure air buffer tank, 900 ltr. incl. air dryer incl. chiller / cooling tower the machine is dismantled and on stock in Germany
Used Hermetic Press, Plate Press Manufacturer: OCEM Type: OPA 1440DS Year of Make: 1993 Molds included: 300x300/4, 400x400/2 Used hermetic press, concrete tile/slab/terrazzo press Manufacturer: OCEM Type: OPA 1440DS Year of manufacture: 1993 Includes moulds: 300x300/4, 400x400/2
Haco ERM 320 ton x 6100 mm CNC Capacity: 320 ton x 6100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 5050 mm Max stroke: 250 mm Max distance between table -- ram: 500 mm Depth of throat: 330 mm Locking speed: 80 mm/sec Working speed: 8 mm/sec Returning speed: 100 mm/sec Electric motor (power): 22,5 kW Length: 6500 mm Depth: 1980 mm Height: 3700 mm Weight: 33 ton
pressure: ca. 5 t dayligth: 110 mm throat: 40 mm weight of the machine ca.: ca. 50 kg dimensions of the machine ca.: 1,2 x 0,5 x 1,3 m Function: ready for operation: 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
