127,250 used machines on RESALE, but how to find them? Machine Search
ID3680 Haarup Mixodatamat 1200/2000 year/Year of construction 1993 Slab press for 50mm slabs with backing concrete, with mixer, portioning, press, including steel pallets for picking the pressed slabs. Slab press for 50 slabs with back concrete, with mixer, portioning, press, incl. steel pallets for picking the pressed slabs
Key data: 250 t, 100 mm
Heavy-duty cylinder with two-stage pump Type SB -2504 - RO Series 365 Pressure 250 ton
Haco PPM 175 ton x 3600 mm Capacity: 175 ton x 3600 mm Backgauge: electric Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: knuckle-joint SLIDE total force (nominal): 160 to stroke: 60 mm stroke rate (max.): 70 /min COUNTER RAM nominal force: 40 to stroke: 14 mm V-RING nominal force: 50 to stroke: 10 mm TOOL DIMENSIONS lower table (left-right): 480 mm lower table (front-back): 520 mm upper table (left-right): 480 mm upper table (front-back): 520 mm shut height max.: 314 mm ram adjustment: 80 mm distance between columns (H-frame): 500 mm passline opening (free passage in side columns): 220 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 210 mm sheet thickness max.: 6 mm feeding step max.: 999.9 mm sheet length min: 2000 mm pilot release system: yes band lubrication system: yes Complete refurbished fineblanking press: disassembly into individua ...
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: servomechanic quick die change system: yes feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 70 mm stroke rate (max.): 140 /min COUNTER RAM nominal force: 80 to stroke: 25 mm V-RING nominal force: 125 to stroke: 25 mm TOOL DIMENSIONS lower table (left-right): 600 mm lower table (front-back): 600 mm upper table (left-right): 600 mm upper table (front-back): 600 mm shut height max.: 386 mm ram adjustment: 125 mm COIL CHAIR coil weight max.: 5 to DECOILER design: single reel sheet width max.: 500 mm coil weight max.: 5 to LEVELLER UNIT sheet width max.: 500 mm sheet thickness max.: 8 mm number of leveller rolls: 9 STRIP-FEEDER feeder type: roll feeder sheet width max.: 250 mm sheet thi ...
A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible.
Fritz Shuttle Table Press Closing force approx. 300T Platen 2.7 m x 1.8 m deep 3x adjustable platens top and bottom Type of heating: induction Shuttle located at the rear of the press Used for rubber moulding
Offered is a Kocher + Beck rotary die cutter/rotary die cutting technology. SKK: scale front stop 5, scale on cylinder 9, 10bar, Mini B (pressure downward): scale front stop 11, scale on cylinder 5, 20bar, Memobox carton: scale front stop 3, scale on cylinder 11, 40bar, Memobox insert: scale front stop 5, scale on cylinder 5 & 2mm, 10bar. Inspection by appointment possible.
An eccentric press / punching press year approx. 1992 is offered. Viewing is possible by arrangement.
An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement.
Specifications: Pressure: 50 t Bending length: 2000 mm Equipment: - Backgauge - Emergency stop push button - Foot control
CONTROLS PC controller BECKHOFF Offer for services of complete Overhaul of a Customer-Owned Fineblanking Press FEINTOOL GKP 160Scope of Overhaul• Complete disassembly into individual components• Inspection of all parts, including crack testing of critical components• Overhaul of the drive system, new motors• Reworking and precise alignment of all guideways• Complete overhaul of the hydraulic cylinders• Overhaul of the clamping tables• Installation of a new hydraulic unit• Renewal of the pneumatic system• Renewal of the electrical systemModernisation / Retrofit• Combined table • Servo feed systems• Central lubrication system • RAZIOL band lubrication• New brake/clutch unit• BECKHOFF PC-based control system with touch panel• PILZ safety control system• Implementation of CE conformityNotes• Special options and customer-specific extensions can be inte ...
CONTROLS electronic controls SIEMENS S7 300 PRESS DESIGN drive system: eccentric / crank openings in uprights: yes number of suspensions: 2 table cushion: no quick die change system: yes PRESS FORCES total force (nominal): 250 to PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1100 mm height above floor level: 1105 mm opening in bed (left-right): 1700 mm opening in bed (front-back): 305 mm SLIDE table surface (left-right): 2080 mm table surface (front-back): 1000 mm stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke adjustment: yes stroke min.: 20 mm stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 500 mm distance between columns (H-frame): 2055 mm passline opening (free passage in side columns): ...
A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible.
Specifications Maximum pressure: 32 tons Pressing force: 4.33 kg/cm2 Number of bindings: 4 horizontal Channel cross-section: 820 x 900 x reg mm Dimensions of the tailgate: 82 x 135 cm Bale weight: bos 400 kg Weight: approx. 6.1 tons Power connection: 380 V/ 22 kW Bale tying: automatic
Offer 25514 Specifications: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2700 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported
Fette P 1200 IC rotary tablet press with changeable turrets EU19/BB (30 stations, max. tablet diameter 13 mm, max. filling depth 18 mm, capacity up to 216,000 tablets/hr.), EU1/D (20 stations, max. tablet diameter 25 mm, max. filling depth 18 mm, capacity up to 120,000 tablets/hr.) and EU1-441 (20 stations, max. tablet diameter 25 mm, max. filling depth 18 mm, capacity up to 120,000 tablets./hr.)
Offer 25513 Specifications: - Max. working length 2050 mm - Column passage 1750 mm - Max. pressing force 850 kN - Distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 365 mm - Lifting speeds - Rapid traverse downward speed 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx. W 2700 x H 2900 x D 2100 mm - Weight approx. 9100 kg - with: - with 5 axis CNC control DELEM , DA - Y1 + 2 ; X ; R ; Z - Two-hand control panel with foot switch - Controlled crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Tool clamping - Die table displacement pneumatically supported
Specifications: Maximum pressure: 40 tons Year of Make: 2007 Pressing force: 63 tons/m² Oil tank: 600l Bale weight: 300-400 kg Weight: approx. 7.6 tons Power connection: 400 V/ 15 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers
Offer 25515 Specifications: - Max. working length 2050 mm - Column passage 1750 mm - Max. pressing force 850 kN - Distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 365 mm - Lifting speeds - Rapid traverse downward speed 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx. W 2700 x H 2900 x D 2100 mm - Weight approx. 9100 kg - with: - with CNC control DELEM , DA - Two-hand control panel with foot switch - Controlled crowning device - Back gauge with height adjustment 5 - 860 mm - hydr. Tool clamping - Die table displacement pneumatically supported - Sharpening tool + V-die
stroke: 16-140 mm pressure: 75 t weight: 4,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing is possible by prior arrangement.
SLIDE total force (nominal): 250 to stroke: 61 mm stroke rate (max.): 60 /min stroke rate (min.): 15 /min COUNTER RAM nominal force: 75 to V-RING nominal force: 75 to TOOL DIMENSIONS lower table (left-right): 540 mm lower table (front-back): 540 mm upper table (left-right): 540 mm upper table (front-back): 540 mm STRIP-FEEDER sheet width max.: 250 mm sheet thickness max.: 10 mm sheet length min: 1500 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 3150 mm space requirements -front/back-: 2120 mm total height: 3000 mm total weight approx.: 14000 kg Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: 160 - 305 mm Fixed: 175 - 320 mm Vertical adjustability ...
Manufacturer: Amada Model: STPC Year of Manufacture: 1990 Maximum Press Force: 160 kN Maximum Stroke: 220 mm Nominal Current: 345 A Number of Phases: 3 Power Supply: 380 V / 50 Hz Installed Power: 12 kW Machine Weight: 1,150 kg Find more here - / Contact us at -
Technical data: Maximum pressure: 60 tons Year of Make: 1999 Press force: 72.7 t/cm² Number of Bindings: 4 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1400 mm Bale weight: 450-650 kg Weight: approx. 20 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance If you have any further questions about this or similar channel balers, please do not hesitate to contact us by email or phone!
Technical data Maximum pressure: 24 tons Power connection: 400V / 4kW Press force: 2.5 kg/cm² Year of Make: 2012 Bale size: 1200x800x1000 mm Price: on request Bale weight: approx. 400 kg Machine is fully functional after technical supervision. There is a possibility to order the machine with paint renovation. For more information, please contact us by email or phone!
Technical data Maximum pressure: 26 tons Power connection: 400 V/ 4.6 kW Press force: 2.7 kg/cm² Year of Make: 2016 Bale size: 1200x800x1150 mm Bale weight: approx. 400-450 kg Price: on request Machine is fully functional, after technical supervision and renovation.
A shoe cutting press from Deutsche Vereinigte Schuhmaschinen (DSGV-/USM Group) is available. Press force: 25t, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 1000mm/900mm/1550mm, weight: approx. 300kg. An on-site inspection is possible.
Technical data Maximum pressure: 20 tons Power connection: 400V / 2.2kW Pressing force: 2.6 kg/cm² Year of Make: 2001 Bale size: 1100x700x800 mm Productivity: approx. 3 bales/hour Bale weight: approx. 200 kg Price: on request Bale weight: paper: up to 200 kg, film: up to 300 kg Machine is fully functional after technical supervision. Price also includes paint renovation. If you have any further questions, please do not hesitate to contact us by phone or email!
Technical data Maximum pressure: 9 tons Year of Make: 2010 Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power connection: 400 V/ 50 Hz Machine is fully functional after technical supervision. Feel free to contact us! Machine is fully functional after technical supervision.
A bread roll machine TWA Erika is available. Dough system range: 750g-2550g, product weight range: 20g-85g, machine dimensions X/Y/Z: approx. 700mm/600mm/1700mm. Including three rounding plates. An on-site inspection is possible.
Features: Volume 2880 L Operating pressure 2 bar Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Overall height 2650 mm Height 1400 mm Diameter 1400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description: Operating temperature 20 °C Topsoil: Clapper bottom 2 crane eyes T-piece with CIP line and pressure relief valve CIP Ball Tank cylinder: Level measurement at the top Manhole 350x450 mm Ladder hoes Flange Underbody: Clapper bottom 2 x drain in subfloor 4 trumpet feet, height-adjustable, with washers
Type Falach 35 Briquette diameter 50mm Press capacity 25 - 40 kg / hour Briquette length approx. 20-40 mm Hopper volume 0.38 m3 Pump motor input 4 kW Power consumption 2.2 kW / hour Required input voltage 3x400V, 16 A Oil cooler no Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900 kg / m3 Maximum noise level 68 dB Transport dimensions 1860 - 890 - 1100 mm Weight 400 kg
Type 50 Briquette diameter 50mm Press capacity 40 - 60 kg / hour Briquette length approx. adjustable 35 mm Hopper volume 0.38 m3 Pump motor input 5.5 kW Power consumption 3.8 kW / hour Required input voltage and current 3x400V, 16 A Oil cooler yes Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900 kg / m3 Maximum noise level 68 dB Transport dimensions 1860 - 890 - 1100 mm Weight 390 kg
Type 70 Briquette diameter 70 mm Press capacity 60 - 80 kg / hour Briquette length approx. 40 – 60 mm Hopper volume 0,75 m3 Pump motor input 7,5 kW Power consumption 4,9 kW/ hour Required input voltage and current 3x400V, 25 A Oil cooler no Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900-1100 kg/m3 Maximum noise level 68 dB Transport dimensions 2220 - 1200 – 1510 mm Weight 840 kg
Type 100 Briquette diameter 70 mm Press capacity 90 - 120 kg / hour Briquette length approx. adjustable 45 mm Hopper volume 0,75 m3 Pump motor input 11 kW Power consumption 8,2 kW/ hour Required input voltage and current 3x400V, 32 A Oil cooler yes Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900-1100 kg/m3 Maximum noise level 68 dB Transport dimensions 2220 - 1200 – 1510 mm Weight 810 kg
Type CUBE 20 Briquette diameter 30 x 30 mm Press capacity 10-25 kg/hour Briquette length approx. 6-50 mm Hopper volume 0,28 m3 Pump motor input 2,2 kW Power consumption 1,1 kW/hour Required input voltage and current 3x400V, 16 A Oil cooler no Operation continuous Automatic reverse of support wheels no Automatic switching-out no Maximum percentage of moisture 15 % Specific weight of briquettes 900-1100 kg/m3 Maximum noise level 62 dB Transport dimensions 1300-740-1120 mm Weight 233 kg
Code: 0279 Brand: ALBERTI V. Model: PCC 33/18 Continuous cycle hot press for veneering, furniture, doors, panels, composite materials and various Max working length 3300 mm Max working width 1800 mm Opening 200 mm N° 6 pistons diameter 100 mm Solid platens Diathermic oil heating Loading conveyor
Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: CLECIM, AUBURTIN, OILGEAR Force: 3000 MT Bilet dia.: 8’’ Built: 1972 Modernised: Mechanical & Electrical in 2000 Scope of supply: Log Loading Table Log Furnace Billet Shear Extrusion Press Run-out Table Puller Stretcher Finishing Saw Aging Furnaces
pressure: 1000 t distance between columns: - mm stroke: 200 mm total power requirement: 30 kW weight of the machine ca.: 8 t multiple images available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: SMS, Junker, Allen Bradley Force: 2500 MT Built: 1983 Modernised: 2017 Allen Bradley Ethernet Control System & NITROGEN DIE Cooling system Billet dia.: 8” Length: 450 – 950 mm Scope of supply: Log Loading Table Log Furnace Extrusion Press Run-out table Single Cable Puller Cooling Ventilator System Section Stretcher Storage Table Finishing Profile Saw Aging Furnace Die Heating Furnace Automatic Stacker Spare Parts
Qty. 1 Secon-hand aluminium extrusion press line Mfc.: AJAX, LOEWY Built: 1965 Force: 13.6 MN Billet dia.: 152 mm, 6 inch Length: 600 mm Scope of supply: Billet Induction Furnace Extrusion Press Exit profile flame cut Cable Puller Graphite Run-out Table with Pilgrims Pitch Traction bench Oliver Pendular cold saw Manual Piling
TECHNICAL DATA: Work table: 3500 x 1300 mm Solid work tables 08 Piston: Ø 85 mm Vertical stroke: 400 mm Total installed power: 31 kW Operation with diathermic oil
TECHNICAL DATA: Working area: 3000 x 1300 mm Pressure plungers: 06 Press piston with Ø 70 mm (stroke 260 mm) 02 Reciprocating piston with Ø 40 mm (stroke 270 mm) Stop piston: 04 Piston for closing with Ø 70 mm (stroke 260 mm) 02 Opening piston with Ø 40 mm (stroke 270 mm) Installed power: 22 kW EQUIPPED WITH: Loading bench with pusher Discharge bank Boiler for heating diathermic oil
355 x 185 cm, 3 stamps on top, 2 on the side Used machine
Proportional pressure control valve, R901344934, ZDREE6VP4-….; Rexroth, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - Comes from a spare parts warehouse of a certified production facility, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
The T 4.40 DSK is an oil-free combined pressure/vacuum pump for blowing and suction air. It is a robust and durable pump that is designed for continuous operation. This dry-running positive displacement pump works with self-lubricating gate valves made of a graphite composite and requires minimal maintenance. Volume flow 50 Hz 35 m³/h Pressure/vacuum relative 50 Hz ±0.6 bar Power 50 Hz 1.85 kW Sound level 50 Hz 68 dB(A) Volume flow 60 Hz 43 m³/h Pressure/vacuum relative 60 Hz ±0.6 bar Power 60 Hz 2.2 kW Sound level 60 Hz 68 dB(A) Weight 46... 49.5 kg with motor
Semi-automatic ceramic press for the production of round green bodies (= unfired mouldings) made of clay and other extruded masses, e.g. caps, vases, pots, tubes, tubes, etc. Part diameters from 90 mm to 350 mm are possible, max. part height: 350 mm. Output: Up to 300 cycles per hour. The system consists of: feeding device, cutter, press, lubrication device, discharge device, control cabinet with control panel and hydraulic power unit. Connected load of the entire system: 15.8 kW.
Vacuum extrusion press 'UNIVERSA' PZG 40-40a with 400 mm Ø and 18.5 kW drive (expandable up to 55 kW). Maximum pressing pressure: 30 bar. Extruder incl. PZSVG 35a pre-press with 15 kW drive. Includes base frame with motor clamping device. In regularly serviced condition; last revision in 2022. Previous use: Production of ceramic roof tiles. Available for an extra charge: vacuum generator and various mouthpieces.
maximum number of results exceeded
please refine your search
