roto used for sale

Rotocontrol digital finishing line, Unwinder; Corona treatment ; Webgide unit; Flexo unit with UV-drying; Flatbed screen unit (never used); Helped rotary die station; Length cutting device; Rewinder

machine measurements: -- mm machine weight: 1.500 kg power capacity: 30 kW Condition: used, Specification: shredder/Shredding plant with two shredders type: WLK 6 S / 30 V-rotor Weima low and slow speed rotor, and second shredder make: AMIS complete plant ready for operation, incl. hopper with lid and platform. Special accessories: - automatic star-delta start-up - gear motor with transport screw - lid with limit switch - quick-change sieve - Hopper can be lifted manually - Equipment for underfloor installation consisting of hopper elevation, guard rail, external emergency stop WLK version with sound insulation, sound-insulated lid and front door Technical data: - Hopper volume: 0.9 m³ - Operating voltage: 3x 400 V - Motor power main drive: 30 kW, 1,500 rpm - Motor power hydraulics: 1.5 / 2.0 kW, 1,500/3,000 rpm - Weight approx.: 1,500 kg ...

saw-blade dia.: 250 mm turning speeds: 2800 U/min pressure: 6-7 bar weight of the machine ca.: 273 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-spindle copy milling machine with stops for aluminium and plastic profiles Maximum spindle speed: 12,000 rpm Stop arms right and left Good condition

ID3836 Geotec Rotomax XL GTC year/Year of construction 2023 approx. 3500 hours/hours 16.5 t Geothermal drilling rig with drill rod magazine, 167 m of NS95 drill rods, and approx. 60 m of 178 mm protective casing Geothermal drilling rig, with rod magazine, 167 m NS95 drill pipe, approx. 60 m - 178 mm protective casing

charge load: 125 liter : 1.000 mm tank diameter / tank height: 920 / 480 mm : 210 mm voltage: 380 V weight of the machine ca.: 630 kg dimensions of the machine ca.: 1,10 x 1,50 x 1,30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used ball mill manufactured by LLEAL model ROTORMILL MH 45 Technical characteristics Ball diameter 2 mm Transportation Information Length 2000 mm Width 1800 mm Height 2100 mm Documentation Operation Manual In your state

SUNDER ROTOMAX 1,5 Flexible Shaft Grinder Manufacturer SUNDER Model ROTOMAX 1,5 Year 2006 Condition untested Location 35614 Aßlar DE Lot 83

ID3875 Kretzer Rotomat 5L Drum saw, with 5 large compartments, log length 25–50 cm, rarely used Drum saw, with 5 large compartments, log length 25-50 cm, little used

Second-hand ball mill manufactured by LLEAL. Model 45 Includes dashboard. Documentation: CE + EEx Installation, Service & Maintenance Manual Drawings Technical characteristics Ball diameter 2 mm ATEX Working Conditions Transportation Information Length 2000 mm Width 1700 mm Height 2100 mm Documentation CE Certificate ATEX Certified Maintenance Manual Operation Manual Plans In your state

Used rack oven W&P, type: Green REC 1280 -In very good bakery condition- - for tin trolleys 60 x 100 cm - with gas or oil burner - Rack trolley with 21 supports (12.6m²) - El. Connection: 400 V, 50 Hz, 9 A - Dimensions: W 1,740 x H 2,400 D 1,900 mm - Max. weight turntable: 350 kg - Very good condition, technically everything checked Visits and test runs are possible by arrangement.

Hommel Rotormat R1000-Super Leftover Bread Chopper used Machine runs neatly and smoothly 3kW motor, high torque with engine brake, standstill immediately after switching off well-maintained condition, should still be thoroughly cleaned before use with motor brake Video about test run available

WERNER & PFLEIDERER ROTOTHERM REC 1020 – Ofen – 2002 – FÜR ERSATZTEILE / ZUR RENOVIERUNG Hersteller: Werner & Pfleiderer Lebensmitteltechnik Modell/Type: Rototherm REC 1020 Baujahr: 2002 Seriennumber: 3003698/0060 Heizart: Öl / Gas Heizleistung: 87 kW Ölverbrauch: 7.5 kg/h Stromversorgung: 400 V / 50 Hz Backform: 600 × 800 mm Type: Dreh-/Wagenofen Beschreibung Zum Verkauf steht ein gebrauchter Ofen vom Typ Werner & Pfleiderer Rototherm REC 1020 aus dem Jahr 2002. Der Ofen wird als Gerät in Einzelteilen zur Reparatur angeboten. Übersetzt mit DeepL (kostenlose Version)

Rotoflex VLI-330 – Slitter rewinder Year: 2002 Speed: up to 200 m/min Max. unwind roll diameter: 762 mm; max. rewind roll diameter: 610 mm Core diameters: 25 / 40 / 50 / 76 mm Compressed air: 6 bar Slitting with circular knives. Usable working width and further equipment on request. Reference: PP-54976 Further information on request.

ID3894 Schlick 600 Roto Jet year/Year of construction 1996 Sandblasting system Sandblasting machine

Granulator used Manufacturer: Alpine Type 20/12 Ro Rotoplex with 4 sieve inserts Nominal power 4 kW Rated speed 1500 rpm Knife circle diameter 200 mm Rotor blades Number 2 pieces Stator Knives Number 3 pieces Available now! very good and functional condition Documents available

Working width: 450mm, Diameter: 430mm. Auction-ID: A1-50340-46

Working width: 450mm, Diameter: 430mm. Auction-ID: A1-50340-45

RD48 Rotor 48x0.5 ml THERMO SCIENTIFIC Speedvac; ; New equipment in its original packaging; ; Compatible with Speedvac Savant model DNA110 and DNA120; For 48 microtubes of 0.5ml; ; Internal reference: FA-1707; Auction-ID: A1-50994-1043

- Manufacturer: Putzmeister - Machine Type: Rotor Concrete Pump - Presumed pump type: Putzmeister R 65 - Flow rate: up to approx. 40 m³/h - Max. delivery pressure: approx. 25 bar - Rotor delivery hose: approx. Ø 125 mm - Drive: electric - Motor power: approx. 45 kW - Voltage / frequency: 400 V / 50 Hz - Hydraulic tank: approx. 100 litres - During inspection, the hydraulic tank appeared to be about half full. - Before commissioning, a service including inspection or renewal of the hydraulic oil is recommended. - Operating hours: Approximately 750 operating hours are noted on a service/maintenance sticker from 2022. - The current operating hours are not known. Since 2022, further operating hours may have been added. - According to the seller, the machine was originally purchased for a project, but not used. - Accessories: The hoses recognizable in the pictures are part of  ...

Type; AUMA 15SN X 1600 Manufacturer: Berstorff, Germany Year of manufacture: 1998 Technical Specification: Working width: 1600 mm Steel belt width: 1750 mm Steel belt thickness: 1,8 mm Steel belt length: 15600 mm Rolls width: 1950 mm Center distance between frames: 2330 mm Heating roll diameter: 1500 mm Stretch rolls (I, II, III) diameter - 1000 mm Vulcanizing time: 1?30 min Working speed: 7?.210 m/h Max steam pressure in heating roll: 13 bar Max steam pressure in lower stretch roll: 8 bar Surface temperature of: Heating roll: ca. 195oC Lower stretch roll: ca. 175oC Pressure in heating zone between steel belt and rubber: 60 N/cm2 Main motor speed: 1 450 min-1 Drive position: Left from inlet Paint: RAL 6011 Air supply: 6 bar Cooling water supply: + 25oC Max hydraulic pressure Belt pressure tension: 250 bar Belt pressure regulation: ...

FOR SALE... TAIKO TWO ROTOR SCREW PUMP TO WHOM IT MAY CONCERN WE VE NEW UNUSED TAIKO CSL-600 TWO ROTOR SCREW PUMP AT OUR STOCK THIS PUMP KEEPED AS SPARE PUMP AT TANKER VESSEL. PLS FIND SPEC AT BELOW. SERIAL NO.: NO. A1K6369 TYPPE: CSL-600 CAP: 560 m3/h REV: 1300MÄ°N POWER: 400PS DATE OF MANUFACTURE: NOV 2006 PUMP IS READY TO TRANSPORT AT WARE HOUSE. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Abu Ugurluba Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: 90 232 618 03 85 Mobile: 905556084850aliagamarine.com TURKEY

the machine with two motors each 5.5 kw and blades 40 mm 2 hooks machine complete with hopper and stood and as well as a new control panel

QTY 1 x Berstorff Auma, Original year of manufacture 1972, Main Drum 1700mm wide x 1000mm dia, Aux drums 1700mm x 600mm dia, Steam heated, currently with 1660mm wide rubber coated woven steel belt, max pressure 192 Bar (approx 3000psi), 2 speed gearbox, Modern 5.5kW DC variable speed motor. Including let off and wind up units. Complete and in good working condition.

QTY 1 x used Berstorff AUMA  Serial no. AO 3178/75, year 1975, Main drum width +/- 2500mm Main drum dia +/- 3000mm Aux drum dia. 1400mm Thermal oil heating With Sandvik 2250mm 1650SM grade stainless steel belt 1.8mm thick. Hydraulic pressure 350kp/cm  With 40HP motor and 3 stage reduction gearbox. The main drum and steel belt are in good/serviceable condition (the drum and belt were replaced in 1990's).  Note ALSO Available: 1 x new/unused spare Sandvik 1650SM grade stainless steel belt, 2250mm wide (in original crate).

TO WHOMIT MAY CONCERN ; WE VE NEW UNUSED COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 AT OUR STOCK ADDATIONALY WE VE RECON COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 COMPRESSOR SIDE AND TURBINE SIDE ARE NEW .. THIS ROTORS ARE FIT FOR BELOW EXHAUST TURBO CHARGER TYPE TYPE ABB VTR 304 P 11 HT 439312 n max 467 n bmax 443 t max 680 t bmax 650 HZTL 428765 P3 EX STOCK. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Roto Feed Head, MCT 16265 R, Filton, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Connection thread R 3/8" Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Rotofeeder end feeding system Fleetwood type: FSI including transport system from magazin to the Ferrum can seamer distance way approx. 2.800 mm complete reconditioned and fixed for can ends 202 including PLC Siemens S7

Shredder UNTHA RS-100 Main shaft speed: 17.3 rpm Auxiliary shaft speed: 28.0 rpm Chopping discs width: 38 mm Drive power 2x55 kW 400 V, 50 Hz Screen perforation round: Ø 25 mm and 80 mm Total weight without base: approx. 12,000 kg Control cabinet with wiring : complete Incl. funnel + pusher and base frame clean machine, checked, always maintained, 1 owner !

With Buchi B-300 Heating Bath Auction-ID: A1-50979-70

Rototilt SMP ST15 Fully Overhauled for Hitachi ZX135 CW 30 Coupler Auction-ID: A3-46111-36361

Rototilt SMP St28 for HITACHI ZX225 completely overhauled CW 30 Small Coupler Auction-ID: A3-46111-36360

In cage Tilting bucket Rotor Auction-ID: A1-47396-1116

Stock number: R1217, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Agitator, Head: D 130 mm, Agitator type: Homogenizing, Shaft lenght: L 465 mm, Motor: 0.37/0.55 kW - 380Volt - 1350/2700 rpm

Stock number: F1061, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: Table model, Dimensions: L 400 x W 400 x H 240 mm, Total height: H 550 mm, Piston dosage: 0,1-4 litre, Variable speed: 2 variable filling speeds , Filling heads: 1 pc. Ø 18 mm, Other: Foot pedal

Stock number: F1060, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs, Item: Filling machine, Standing: Table model, Dimensions: L 400 x W 400 x H 240 mm, Total height: H 460 mm, Piston dosage: 0,1-4 litre, Variable speed: 2 pcs variable filling speeds, Filling heads: 1 pc. Ø 10 mm, Other: Foot pedal

Stock number: R034, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Agitator, Agitator type: 4-blade propeller, Agitator placement: For top flange mounting, Propeller size: D 700 mm, Motor: 7.5 kW - 380 Volt - 365 rpm

Number Of Colours: 8 // Printing Width: 820 mm

Dimensions (L/W/H): 2020x920x1160 mm Weight: 750 kg Total power requirement: 3,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x750x1250 mm Weight: 600 kg Total power requirement: 3 kw Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2020x920x1160 mm Weight: 680 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotor brake, disc brake, electro-hydraulic disc brake, crane brake, disc, drum and storm brakes, overhead crane brake -Manufacturer: Pintsch Bubenzer, rotor brake disc brake unused -Type: SB 23-450x30-80/6 -Braking torque: 1850 Nm -Accessories: incl. 3 sets of replacement burners -Quantity: 2 pieces brake available -Price: per piece -Dimensions: 370/330/H650 mm -Total weight: 105.7 kg/pc.

Titanium angular rotor BECKMAN COULTER 70.1 Ti Fixed angle rotor Max: 70,000 rpm, 450,000 x g Capacity: 12 x 13.5 mL Nominal capacity: 162 mL K Factor: 36 Angle: 24º Maximum tube length: 76 mm Maximum tube diameter: 16 mm For use with H, R, S centrifuges

Fiberlite F18-8x50cy Fixed Angle Rotor THERMO SCIENTIFIC New equipment in its original packaging Thermo reference: 75003663 Capacity: 8 x 50ml Max. speed: 14,500 rpm FCR Max: 24.446 ×g Compatible with the following models: Thermo Scientific Sorvall Legend XT/XF Centrifuges, Sorvall Legend X1, Multifuge X3/X3F, Multifuge X1 and SL 40F

Aluminum angular rotor BECKMAN COULTER JA-25.50 Fixed angle rotor Max: 25,000 rpm, 75,600 x g Capacity: 8 x 50 mL Nominal capacity: 3,000 mL Biosecurity Lid For use with Avanti J Series and J2 Series Centrifuges (except J-21 Series)

Fixed rotor for EPPENDORF T-60-11 microtubes New equipment in its original packaging Year of Manufacture: 2013 Capacity: 60 x 1.5/2.0 mL microtubes Compatibility: Eppendorf 5804 / 5804 R / 5810 / 5810 R Centrifuges Aerosol Tightness: No Max. FCR: 16,435 × g Max. speed: 14,000 rpm Microtubes supported: 1.5 / 2.0 mL

General Description – Frame 5 Gas Turbines (15 Units for Sale) The offering includes fifteen (15) Frame 5 industrial gas turbines manufactured by General Electric, known for reliable performance in power generation and mechanical drive applications. The GE Frame 5 Gas Turbine is a heavy-duty, single-shaft unit designed for continuous operation in demanding environments, with a typical output of approximately 19 MW per unit.

located in the southern region of the Kingdom of Bahrain, the station produces Electrical Power by means of Gas Turbine Technology. Kraft Work Union (KWU) AG (Siemens) of Germany for Phase I, which comprised, 5 (Five) Units of V93.1 Frame Gas Turbine Generators with 50MW production capacity each.

EPPENDORF S-24-11-AT Microtube Free Oscillating Rotor New equipment in its original packaging Year of manufacture: 2021 For EPPENDORF 5427R Centrifuge For 24 microtubes 1.5/2ml With aerosol-tight QuickLock lid Max speed: 16,049 × g (12,700 rpm)

Stock number: R1188, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Standing: On a stand, Agitator type: Propeller, Axle length: L 190 mm, Motor: Variable speed; 0,6 kW - 220 Volt, Other: Excl. propeller