rotec 2000 used for sale

with ABUS chain hoist 2 strands 1 T0 Auction-ID: A1-45937-2360

48V/10Ah; with charger 230v; emergency stop; removable battery; battery indicator; 6213 Auction-ID: A1-45901-719

Control type: Unilog B4 Closing system: Knob TECHNICAL DATA Closing force: 50 kN Maximum mold size: 196 mm x 156 mm Plate dimensions: 196 mm x 364 mm Mold size: min. 100 mm Maximum opening stroke: 200 mm Maximum plate spacing: 300 mm Screw diameter: 14 mm Injection volume / Shot weight: 1.1 ccm / 1 gram PS Injection pressure: 2500 bar GENERAL DATA Motor: 2 kW EQUIPMENT Language: German Hydraulic core: - Air valve: x1 Service booklet: Yes Additional equipment: See below Additional equipment:  Rotary table,  Robot integrated with the machine,  Fully electric injection molding machine,  Quality monitoring module,  Cleanroom module,  Mold pressure control,  Quiet machine operation,  Additional 14 mm screw Auction-ID: A7-45917-4

CNC VERTICAL MACHINING CENTRE Inv. No.13.164M1 Make DMG Model 63V Serial number 28850011162 Control Heidenhain TNC426M Year 2000 X-travel 630 mm Y-travel 500 mm Z-travel 500 mm Table size 500 x 800 mm Spindle taper SK 40 R.P.M. 8000 kW 13 Volts 400 Cycles 50 Including: Linear guide way Rear splash guard and chip tray. Automatic lubrication. Telescopic way covers. Chip conveyor ATC 24 positions Auction-ID: A1-45737-176

Body size 4450x2200 mm Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-31

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: CHIRON Type: FZ 08 B/W Year of Make: 2000 Machine Type: CNC Vertical Machining Center Control: Siemens Sinumerik Operating voltage: 3/N/PE 400 V Frequency: 50/60 Hz Control voltage: 230/24 V Connected load: approx. 21 kVA Rated current: approx. 35 A Configuration Double clamping system / pendulum operation 2 clamping stations NC sub-unit Peiseler AWUP 100 Automatic tool changer Cooling lubricant system Extraction system Full fairing Compact design for series production Auction-ID: A7-46048-9

Incl. ZEISS CL 6000 LED cold light source Auction-ID: A1-46045-109

Auction-ID: A1-46045-118

Slide size 1600x1300 mm Slide stroke 900 mm Opening between the posts 1400 mm Worktop size 1600x1300 mm Max mold size 1600x1300 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-13

For sale is a powerful UVClean 2000 air purifier, ideal for larger rooms and commercial use. Perfect for: Doctors' Offices & Clinics Open-plan offices Gastronomy Event rooms Industry & Commerce Highlights: High air performance – ideal for large areas UV-C disinfection technology Sturdy, professional construction Continuous operation possible Condition: Used, technically flawless. Visually normal signs of wear. Auction-ID: 04L-VNU-1

Technical data Manufacturer: Hurco Model: VMX40 Machine Type: Vertical CNC Machining Center Year of manufacture: 12/2000 Serial Number: M442-01219120AFC Machine Number: Q-6695 Control: Hurco Ultimax Operating hours: 37,207 h Voltage: 380 V Frequency: 50 Hz Connection: 63 A Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Emergency stop available Network connection (10BASE-T) Interfaces: Port 1 / Port 2 / Coax Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation. Auction-ID: A7-46048-32

Technical data Manufacturer: Hurco Model: VMX40 Machine Type: Vertical CNC Machining Center Year of manufacture: 12/2000 Serial Number: M442-01219120AFC Machine Number: Q-6695 Control: Hurco Ultimax Operating hours: 37,207 h Voltage: 380 V Frequency: 50 Hz Connection: 63 A Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Emergency stop available Network connection (10BASE-T) Interfaces: Port 1 / Port 2 / Coax Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation.

Working width 2000mm - Adjustable width cutting machine - Hudraulic lifting arm - Everything seen and tested in working condition - also remains in place until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16518

Carl Zeiss Jena ZKM 02-250 Measuring Microscope with Metronics Quadra-Chek 2000 Manufacturer: Carl Zeiss Jena / Metronics Model: ZKM 02-250 / Quadra-Chek 2000 Condition: used Description For sale: complete workstation for precision optical measurement applications (metrology / quality control), consisting of a Carl Zeiss Jena ZKM 02-250 measuring microscope with Metronics Quadra-Chek 2000 digital readout and evaluation system, as shown in the photos. This setup is suitable for dimensional inspection, geometric measurements, and optical control of small components in quality departments, toolrooms, and measuring laboratories. Travel ranges Measuring system / electronics The Metronics Quadra-Chek 2000 is a digital readout and evaluation unit used with profile projectors and measuring microscopes. Main functions include: • 2D measurements (and 2D/3D applications depending on sy ...

Manufacturer: Mercedes-Benz (DaimlerChrysler) Type: Actros 1848 / 952.07 Vehicle type: Airfield fire engine (FLF 24/25-5), Fire brigade Body manufacturer: Ziegler Registration date: 10.07.2000 Propulsion: Diesel, V8 engine, 15,928 cc Power: 350 kW (476 hp) Transmission: Telligent 16-speed (semi-automatic) Axle configuration: 4x4 all-wheel drive, differential locks front/rear Mileage: approx. 62,200 km (read) Permissible total weight: 18,000 kg Curb weight: approx. 13,500 – 14,000 kg (not verified) Tyres: 395/85 R20 Michelin XZL, approx. 80–90 % tread Extinguishing technology Ziegler \"Power Foam Pro\" Water tank: approx. 2,480 litres Foam compound tank: approx. 510 liters Powder extinguishing system: approx. 250 kg CO₂ extinguishing system: approx. 480 kg Roof monitor / water cannon available Front monitor with extinguishing platform (load app ...

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17033

In full working condition - Working width 2000mm - cutting width adjustable - Hydraulic lifting arm - Everything seen and tested in working condition - also remains in place until disassembly so that tests can be carried out before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16517

Working width 4500 mm; throughput 3-18 m/min; 2x5 machining sensors; and accessories Auction-ID: A1-43429-86

FPA water tanks are equipped as standard with: - Inlet opening with a diameter of 32.5 cm, closed with a steel cover with a rubber gasket - Baffles to prevent water from splashing during transport - Runoff stump - FPA tanks: they are made of steel and galvanized according to EN 1461. Auction-ID: 04M-431-1

Powerlock span; control station with touchscreen Powercom control; with sound booth Auction-ID: A1-43429-71

Equipped with Powerlock span; Control station with touchscreen Powercom control; sound booth ; without the TimBird Auction-ID: A1-43429-74

Connection 380 V. 57.13 kW. Equipped with 9 chains, 9 extraction motors. Auction-ID: A1-43429-57

135cm working width. Hydraulically driven. In good working condition. Auction-ID: A3-43520-6039