rotary used for sale

Manufacturer Düchting Type centrifugal pump LHK 125x5 Unused / Refurbished Flow rate 180 m3/h Head 150m Step number 5 Weight approx. 550kg Special price

Welding turning and tipping-positioning table Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster -Massea cables -Welding current transmission 500 A -Table height at horizontal position 1850 mm -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg

A generally overhauled rotary piston blower brand is offered: Aerzener machine factory Type: GM 4 S See pictures. All our overhauled blowers are equipped with new bearings and density elements. If you have any questions, please call.

table length: 590 mm table width: 590 mm table load: 200 Kg table turning speeds: 0,23 - 2,3 U/min table height: 650 mm total power requirement: 0,55 kW weight of the machine ca.: 600 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A refurbished rotary piston blower brand is offered: Aerzener Maschinenfabrik Type: GMA 12.6 See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

table length: 1000 mm table width: 1000 mm table load: 1,5 t flange diameter: 700 mm turning speed: max. 0,04 U/min weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,60 x 2,0 x 1,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary vane pressure/vacuum pump from Gardner Denver/Rietschle KTA 80/5 complete with 4.0 KW AC-motor, 50 m3/h, + 1.0 bar pressure, - 0.6 bar vacuum, Heidelberg version with Heidelberg plug, completely overhauled with all wearing parts, 1 year warranty

table diameter: 1000 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,25 U/min max. torque on the faceplate: 900 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,37 + 0,75 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Memory rotary table, used rotary storage table Manufacturer: RÖSLER Oberflächentechnik GmbH Type: R 1540 ST Table diameter approx. 1500 mm Built: 2003 Total dimensions: approx. 2600 x 2100 x 1000 mm Memory rotary tables are used for storing, buffering, separation and single feeding of rotational symmetrical parts. They are often enrolled in sliding grinding systems. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m

USED KORSCH MODELO PH 230 ROTARY PRESS REF.: E6431

table diameter: 450 mm table load: waagerecht 300 Kg table load: senkrecht 150 Kg table turning speeds: 0,2- 2 U/min voltage: 230 V / 50 Hz total power requirement: 0,55 kW weight of the machine ca.: 80 KG dimensions of the machine ca.: 0,65 x 0,5 x 1,0 m • unused stock machine • manual tilt adjustment • Start-Stop by foot switch • with CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Printing plate deal Grafoteam TAT 48; good condition; we overhaul before delivery; Max. Plate format 1630x1300mm, min.510x400mm; Interface connection possible. Turn around table Grafoteam TAT 48; good condition; will be rebuilt before shipping; max.plate size 1630x1300mm, min.510x400mm; possible to connect with other machine.

Seitz Enzinger Noll rotary vacuum filter with 15 m2 filter area. Filter run to the last, because of the purchase of a larger machine.

Specifications: - max. Load capacity 10000 kg - Flat discs 1400 x 1400 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotary movement infinitely variable 0.05 - 1.2 rpm - Right - + left-hand running controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 2500 mm - E. handheld remote button - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg

Specifications: - max. Load capacity 750 kg - Face disc diameter 750 mm - Hollow continuous spindle 65 mm - Face disc motorically swivel 0 - 90 ° - Rotational movement electr. infinitely variable 0.05 - 2.0 m/min - Right - + Left - Run - E. – Foot switch + hand remote control - Welding current transmission approx. 500 A - Drive 400 V - Table height with horizontal position 1050 mm - 3. Cheek lining - Space requirement approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg

1 HOZA (Germany) pinking machine type ZEN 80 (Zigzag cutting), knife width 820 mm, working width up to 800 mm, new serrated knife with 6 mm serration gauge, machine equipped with precise hand lever feed mechanism, feed mechanism settable for 2 measures between 0-320 mm, with security light guards, 3 x 380 V, 50 Hz

NC Rotary Table Brand FIBRO, type 11.13.6.15.5.11.11.4.0120 T2 Diameter 800 mm Height: 240mm The indicated retail price is net.

Specifications: - Load capacity 100 kg - Face disc diameter 400 mm - Faceplate infinitely tiltable - Table height with horizontal position approx. 470 mm - Rotational movement electr. infinitely variable 0 - 2.5 m/min - Welding current transmission 400 A - Drive 400 V - Right - Left rotation - Foot switch with foot roller controller for speed regulation - Ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

REF-2357 WORTHINGTON CREYSSENSAC ROTARY-SCREW AIR COMPRESSOR Rotary-screw air compressor. Manufacturer: Worthington Creyssensac. Brand: ROLLAIR. Model: ROLLAIR 75. Compressor: - Rated power: 55kW/75HP - Refrigerated air volume: 9,000m3/h - Sound level: ± 70dB - Weight: ± 1,400kg - Compressed air outlet Ø: 2” - Operating pressure: 12.5 bar Compressor motor: - Manufacturer: LEROY SOMER - Model: AP180LGU-T - Power: 55kW/75HP - 2,945 Rpm - 400V/100A Complete with instruction manual.

Rontech TR A4 rotary feeder for BVM; State as is; suitable for BVM packaging machines; Format max. 420x297mm, min.120x100mm; Product thickness up to 5mm; Capacity up to 200 products/min. Rotation feeder Rontech TR A4 for BVM; condition as is; used for BVM packaging machines; size max.420x297mm, min.120x100mm; thiknes up to 5mm; speed up to 200 products/min.

Manufacturer: Riedhammer Model: DRA 6/40 temp.: 1150°C electrically heated. Installed connected load: approx. 145 kW 6 control areas Plant is as good as new. Almost no operating hours. At call.

AFT Rotary slicer Stainless, 12 station rotary slicer, suitable for tomatoes, eggs and other fruits, mobile, 3Ph

Elmo Rietschle oil-lubricated rotary vane vacuum pump complete with 15 kW/50Hz 3~motor, 700 m³/h, 0.10 mbar(abs), completely overhauled

Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...

1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)

PAL FP8 Rotary filler Serial: FP8MC00016 2016, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.

PAL FP8 Rotary filler Serial: FP8MC00024 2017, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

Technogel 4000E Rotary filling machine Serial: RA1091/01E 2010, Stainless, compact rotary filling machines, capacity 4000 pcs per hour, HMI screen controls, variable speed, mobile, 3Ph

crate tipper functional, for crates up to max 100120cm floor dimension

• Single rotary press with 47 punch stations • Tool type EU 19 with BBS dies (die diam. 22 mm) • Unkeyed turret • Output 28,200 - 282,000 sheets/hour • Pressing force max. 80 kN, pre-pressing force max. 20 kN • Tablet-diam. max. 13 mm • Tablet height max. 8.5 mm • Filling depth max. 18 mm depending on filling curve (filling curve 10 mm fitted) • Filling hopper with flange for docking Bohle container MCG500/900 for powder feeding • Agitator blade filling shoe (Fill-o-matic) for fine powder materials (1 spare filling shoe available) • Fast diverter for missing tablets • Korsch PHK2i Plus press force control system • Touch screen Siemens, software operating system Windows CE • PLC Siemens S7-400 • Existing tool set 2x 47 pieces for tablet-diam. 9 mm, flat/flat with facet • Drive 400V/50Hz • New cabling between control cabinet and machine (wi ...

5 swivel manifolds 8-fold, electric, 160 t/h Tel. 01715213204

Mayfran coolant system with Knoll high-pressure pump for internal cooling Scraper Belt Chip Conveyor Mayfran Bar loading magazine 3 m Equipment: 1 x Sawing unit 6 x Feed unit 1 x Turning unit 1 x Grooving Unit 1 x Thread Rolling Unit 16 x Collet SW36 1 x Saw and Turning Bushing SW36 1 x conversion kit of the turning unit up to SW41 1 x Control Pin Turning Station Unit 8 2 x Hydraulic Drill Head 3 x Angle Milling Head

Stock number: 3876 WELDING TURNTABLE Manufacturer: ESAB, Type: MLA 500 Machine NO.: 414767 Specifications: Large workpiece weight 500 kg Infinitely variable table rotations. pr/min Horizontal / Vertical Length: 1200 mm, Height: 800 mm, Width: 800 mm, Weight: 500 kg

Rotary Vane Vacuum Pump RC 0100E 5Z1 Pumping speed approx. 100 m³/h Vacuum: 20 mbar 400V/50Hz More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

TEXTILE ROTARY PRINTING MACHINE; STORK RD4 MAKE : STORK TYPE : RD-IV NO.OF COLORS : 8 YOC : 1985 , RENEWED / MAJOR OVERHAUL 2008 WW : 1850 MM HEATING : STEAM WITH FLUFF REMOVER TYPE : STORK TYPE SU-II/1850 DRYER : 6 CHAMBERS

The Progress Rotary Judge is equipped as follows -5 rotors with directional nozzles 8-16mm D. wire -1 rotor with straightening rollers for 20mm D. wire. - Straightening extension 14m. with row of hooks. -6 pieces of driven reels 5 to. at call

STORK LASER SCREEN ENGRAVING EQUIPMENT ( ROTARY TEXTILE PRINTING ) LASER ENGRAVER MAKE : STORK TYPE : STK-2000 YOC : 1988, RENEWED / MAJOR OVERHAUL 2012 LENGTH : 310 CM WITH END RING GLUING UNIT TYPE : STORK SCR-85 LACQUER COATER : TYPE : STORK RSE 3100, Q4B1/2000 YOC : 2000 2 DRYING UNITS SCREEN INSPECTION & WASHING EQUIPMENT COOLING SYSTEM SOFTWARE & HARDWARE FOR ENGRAVER PIPING, DUCTING, CABLING ETC ONE LOT OF SMALL EQUIPMENT USEFUL FOR SCREEN PRODUCTION

Hydr. Welding Rotary and Tilting Table - Four Axis - Welding Manipulator Specifications: - Max. load capacity 15000 kg - Face plate dimensions 2990 x 2990 mm - min. table height in horizontal position approx. 1070 mm - Face plate mot .rotatable + swivel or tiltable - Face plate horizontal + vertically movable, travel distance 1250 mm - Rotary movement electr. Infinitely variable - Right + Counterclockwise - Welding current transmission approx. 700 A - Drive 400 V - Connected load 33.0 kW - Handheld remote control for speed regulation - E. footswitch - Space requirement approx. W 2990 x H 1070 x D 5500 mm - Weight approx. 12500 kg

Translyft Rotary table scissor lift Translyft 3Tonne hydraulic scissor lift with rotary table, table diameter 1300mm, mounted on weigh cells with a scale, 3Ph

Offer 24410 Welding Rotary and Tilting Table – Three Axis – Welding Positioner Specifications: -Max. Load capacity 250 kg - Face plate diameter 400 mm - min. table height in horizontal position approx. 500 mm - Max. table height in horizontal position approx. 800 mm - Working height in 3 steps manually height-adjustable - Face Plate mot. rotatable - Face plate can be swivelled or tilted manually + height adjustment - Rotary movement electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V - Connected load 1.5 kW - Handheld remote control for speed - E-footswitch - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Rotary Board Creaser STRÖBEL KS 110-0-1 Serial-No. 188-1501 Working width 1100mm Smallest Sheet length 150mm Rill-Ritzwellen Ø 78mm Power 1,1 kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Specifications: - Load capacity (vertical) 100 kg - Face plate diameter 400 mm - Passage opening 60 mm - Face plate manually infinitely tiltable 0 - 135 ° - Rotational movement infinitely variable mot. Adjustable 0.05 - 5 m/min - E.- Footswitch for start - stop - Table height in horizontal position without castors approx. 750 mm - 3 cheek chuck - Drive 220 V - Space requirement approx. W 450 x H 850 x D 650 mm - Weight approx. 60 kg

Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Electric data: 0,25 kW, 0,37 kW, 24 V, 380-415 Rotating plate diameter: 1500 Overall length in mm: 1700 Nominal / outside width in mm: 1600 Conveying length in mm: 1330 Belt width ...

working width: 3 m speed of p.t.o. shaft: . U/min numbers of tine holder: . 0 Tooth pack roller, cardan shaft, roller, treble The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary table, rotatable and swivelling WMW Ø 450 mm swivel 360° x 90° groove width: 14 / 25 mm Foot size: 400 x 500 mm used ! Dimensions: 860 x 800 x 400 mm

Rotary Actuator, Actuator, 90° Rotary Actuator BERNARD ASP 25 ( ASP25 ) 150 Nm 0,0,0,0 25 rpm 0.03 KW 400 V Hollow shaft: Ø 20 mm Flange diameter: Ø 125 mm New ! Dimensions: 470 x 340 x 320 mm

Rotary table DSZ MKA 250 Ø 250 mm table height: 115 mm groove width: 14 / 20 mm Dimensions: 340 x 410 x 150 mm

Rotary Actuator AUMA SAR 10.1-G0 Speed: 22 rpm Closing torque ( min / max ): 60-120 Nm Opening torque ( min / max): 60-120 Nm Hollow shaft: hexagonal profile, wrench size 32 mm Motor: VD 71-2/35 0,0,0,020 Nm/35br /0,020 37 kW 2800 rpm 380 V 3AC 50 Hz IP 67 New ! Dimensions: 550 x 280 x 310 mm