rotary transfer used for sale

SEPRO rotary tables. In good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Rotary vane vacuum pumps lubricated Manufacturer: Becker Type: U5. 100 Suction power: 100 m ³/h Discharge pressure: 0.1 mbar (abs.) Including: Gasbalast, oil filter Status: Demo Warranty: 12 months Delivery time: In stock; ready for operation

Rotary vane vacuum pumps dry manufacturer: Becker type: VT 4.40 Condition: Rebuilt Voltage 400V DS suction capacity. 40 m³/h warranty: 12 months delivery time: in stock More pumps on request!; ready for operation

Rotary vane vacuum pumps lubricated Manufacturer: Edwards Type: RV 12, RV 3, RV 8 and RV 5 Motor: 230V Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

DMN Westinghouse AL 200 rotary valve Discharge and dosing valve, type AL 200 stainless steel 1.4408 (ASIS 316) Volume 5.5 ltr. / U, SEW direct drive 24 RPM / 0.55 kW / 380 V

Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 250 d Status: Demo Warranty: 12 months Beriebsmittel: Mineral oil Accessories: inlet filter Delivery time: In stock; ready for operation

Rotary vane vacuum pump manufacturer: Becker Type: U4. 630 SA/K o F/K Vacuum: 3 mbar - 0.5 mbar Motor: 15KW status: used, tested! The General overhaul for the device will be sold separately! Including: oil, vacuum suction filter Delivery time: In stock!; ready for operation

1 piece Elster RVG G160 DN80 PN16 Rotary gas meters, used

new all stainless steel turn table diameter 1.250 mm adjustable height 820 – 910 mm safety guard (height 10 mm) adjustable speed 0,12 kW

Rotary vane vacuum pump manufacturer: Busch Type: R5 RA 302 D Voltage: 50/60 Hz 400V Nominal: 300m ³/h Discharge pressure: small 0,5hpa(mbar) Status: Rebuilt Gewaehrleistung-12 months Includes: motor new storage, painting, electrical check Delivery time: In stock; ready for operation

1 x type: S, size 8M, 30 kW 1 x without designation, 37 kW both are workshop inspected and ready for operation

AIRPOL K7 rotary screw compressor was built in Poland in 2015. The versatile device driven by belt transmission, provides the user with the highest quality compressed air and ensures uninterrupted operation even during heavy loads. All this is ensured by the compressor’s cooperation with a reliable MARK OP 20 (A3) refrigeration dryer, which removes moisture and water vapour from the compressed air to minimise the risk of corrosion. Combined with efficient ventilation and an oil separation system, the compressed air is also characterised by a very low oil concentration and a slightly higher temperature than ambient. AIRPOL screw compressor together with the dryer weighs a total of 395 kg. Technical data of the AIRPOL K7 compressor - working pressure: 10 bar - engine power: 7.5 kW - capacity: 57 m3/h - refrigeration dryer pressure dew point: +3°C - cooling air requirement: 1200  ...

Automatic rotative machine for the moulding of car filters, air-oil, panel or circular, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of manufacture: Italy The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos. Specyfications: Available at 24 stations Turntable complete with 24 mould-holders Casting trolley with 2-axes Feeding machine for Polyurethane material Electronic control board to manage the functions of the machine Hourly output: from 200 to 350 pieces, according to the model of the machine, the utilized P.U. material and the mould -- Automatic rotary machine for forming car filters, air-oil filters, plate or round filters, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of origin: Italy  ...

Rotary vacuum pumps sliding & lubricated Number: 5 PCs Status: Rebuilt Warranty: 12 months Manufacturer: Busch Type: RA160D Voltage: 50/60 Hz 400V Motor power: 4KW Nominal: 160m ³/h Discharge pressure: 0,5hpa(mbar) Includes: user manual, parts list Delivery time: In stock; ready for operation

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 251 Warranty: 12 months Accessories: manual; Spare parts list; Oil filling Delivery time: In stock

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

Rotary vane compressor manufacturer: Becker Type: VT4. 25 Voltage: 400V/50 Hz Warranty: 12 months Status: Rebuilt and new painted Pressure capacity: 25 m ³/h Discharge pressure: Max + 1 bar (rel) Accessories: owner's manual; ready for operation

The blower is completely overhauled.

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 501 Warranty: 12 months after delivery Accessories: owner's manual; Spare parts list; Oil filling Delivery time: In stock; ready for operation

The blower level is sold in a completely overhauled way.

Automatic rotary traysealer from the manufacturer VC999, model TS900. It is a traysealer made in Switzerland, with rotary table in 4 positions. The machine is prepared to make up to 4 containers at the same time: only sealing, empty/sealing and vacuum/sealing/modified atmosphere. It is suitable for the use of a wide range of packaging of any material (PP, PS, APET, CPET, cardboard, etc.) using compatible film. VC999/TS900 has been designed to offer a compact solution (occupies just under 3m3) and allows, thanks to a high technological content, to meet high production needs (up to 2400 pieces / hour). The solidity and versatility of this model, together with an optimal value for money, have made the VC999/TS900 one of the most successful and highest quality machines on the world market. Built with first-class components, with exclusive noble materials (stainless steel and anodyne ...

Liquidation of ILPRA automatic traysealer of the FOODPACK series, model 500 v/g. It is a traysealer of Italian manufacture, with rotary table in 2 positions. The machine can perform 4 different packaging functions: sealing only, vacuum/sealing, vacuum/sealing/modified atmosphere (MAP). It is suitable for the use of a wide range of packaging of any material (PP, PS, APET, CPET, cardboard, etc.) using compatible film. Foodpack 500 has been designed to offer a compact solution (occupies just under 2 m / 2 ) and allows, thanks to a high technological content, to meet high production needs (up to 1440 pieces / hour) depending on the type of mold from 1 to 4 containers per cycle. The solidity and versatility of this model, together with an optimal value for money, have made the Foodpack 500 V/G one of the most successful machines. Built with first class components, with exclusive noble materia ...

The fan speed is refurbished, all wear parts are new, can be offered as a complete unit.

Technical data: -Load capacity 300 kg -Faceplate diameter 500 mm -Faceplate in grid levels of tilt - rotation Electr. infinitely variable approx. 0-1.2 m / min -Sweat power 650 A -Drive 220 V / 0.09 kW -Table height in horizontal position approx. 650 mm -Re + reverse - space requirement approx. B H 800 x 650 X 700 mm -Weight approx. 180 kg

Technical data: -Load capacity 30 kg -Faceplate diameter 280 mm -Faceplate swivel - faceplate RPM elect. infinitely variable - re + Li - run -Foot switch -Transmission of welding current 300 A -Drive 220 V - table height in horizontal position 360 / 890 mm -mobile base -3 jaw Chuck -Space requirement approx. B 550 x H 890 x T 550 mm -Weight approx. 50 kg

Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg

A refurbished rotary piston blower brand is offered: Aerzener Maschinenfabrik Type: GM 30 L All our blowers are overhauled and equipped with new bearings and sealing elements. If you have any questions, please call.

The fan speed is refurbished, can be supplied as a complete unit.

FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0.0, Fibro, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. Technical data - SEW Eurodrive worm gear motor SA57 DR63M4/BR/TF, N=1320/35/min., i=38,23, 0,18KW, 230/400V, incl. brake 400V, - FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0, Fibro, - pitch 12, direction of rotation left u right, - All technical details see photos Attention: We also have the mechanically machined rotary table top made of aluminium D1800mm x 25mm thick, we are happy to offer this to you. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. ...

The fan speeds are reconditioned, can be supplied as a complete unit, performance data according to customer specifications.

The blower is sold in a completely overhauled way. The photos show the blower before the overhaul. All our refurbished blowers are equipped with new bearings and sealing elements.

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: BEEK Rotary Punch DFC Die-cutting and creasing for digital printing incl. compressor - Approx. 15 punching plates available - No need for an experienced operator - Professional cutting and creasing results - Operating errors are virtually eliminated due to fixed cutting gap - Safe to use - Very quick set-up, maximum 3 minutes for the stamped part - Little waste, maximum 5 sheets - Long service life of punching plates - Low tooling costs - Printing mark Register Standard - Modular, adaptable design - Tool-free operation - Ergonomically arranged control panel - Solid construction - Maintenance-free On request, we can organize the following points for you: Packaging, loading, transp ...

Sludge feed pump rotary piston pump PL100 Börger Product no.: RE-HU-2019-0701-PK32 System: rotary piston pump sludge feed pump Manufacturer: Börger Type: Pl 100 Speed: 50-700 rpm Flow rate: 2.5 to 38 m3/h Pressure: 12 bar

Becker rotary vane vacuum pump VTLF 250, 250 m3/h, final pressure: - 800 mbar, completely overhauled with all wear parts, 1 year warranty

Capacity: 150 l/min Motor: 1,5 kW Working pressure: 10 bar - Input with threaded supports DN 40 - Output with threaded supports DN 40 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1100 mm Width: 560 mm Height: 1020 mm Weight: kg

- 1 blower built 1987: 800 mbar, 24.2 m3/min, 45 kW, 500 V; - 1 blower built 1993: 400 mbar, 24.2 m3/min, 45 kW, 500 V; - 1 blower built 2007: 700 mbar, 21.8 m3 rpm, 45 kW, 500 V

Capacity: Motor: 1,6 kW Working pressure: 10 bar - Input with threaded supports DN 40 - Output with threaded supports DN 40 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1100 mm Width: 560 mm Height: 1020 mm Weight: kg

Gardner Denver/Rietschle CLFEH 251 V with 7.5 KW AC-Motor, 250 m3/h, Final pressure: - 10 mbar, completely overhauled with all wearing parts, 1 year warranty

Connection: 1 x DN 25, DN 40 (on request the connections can be changed) - mobile chassis - with cable and CE plug Motor: 1,5 kW Capacity: 150 l/min. Pressure: 2 bar Measurements and Weight: Length: 1330 mm Width: 520 mm Height: 860 mm

Oerlikon Leybold Trivac D 8 B with 0.37 KW AC-motor, 8 m3/h, final pressure:

Connection: 1 x DN 25, DN 50 (on request the connections can be changed) - mobile chassis - with cable and CE plug Motor: 11 kW Capacity: 20m3/h Pressure: 8 bar Measurements and Weight: Length: 930 mm Width: 580 mm Height: 1030 mm

Oerlikon Leybold Rotary Vane Vacuum Pump Trivac D 16 B with 0.55 KW EW engine, 16 m3/h, final pressure: .1x10-4 mbar, completely overhauled with all wear parts, 1 year warranty

Connection: 1 x DN 40 , DN 40 (on request the connections can be changed) - mobile chassis - with cable and CE plug Motor: 3,0 kW Capacity: 170l/min Pressure: 2 bar Measurements and Weight: Length: 1000 mm Width: 370 mm Height: 700 mm

Oerlikon Leybold Rotary Vane Vacuum Pump Trivac D 16 B with 0.55 KW DS engine, 16 m3/h, final pressure: .1x10-4 mbar, completely overhauled with all wear parts, 1 year warranty

Becker rotary vane compressor/pressure pump complete with 18.5 KW AC-motor, 500 m3/h, 1.4 bar, completely overhauled with all wearing parts, 1 year warranty

Busch rotary vane vacuum pump RA 0100 E with 2.2 KW AC-motor, 100 m3/h, final pressure: - 0.5 mbar, completely overhauled with all wearing parts, 1 year warranty

Round table, round dividing table, dividing head, dividing head -Table: Ø 250 mm -Height: 100 mm -Groove: 12 mm -Dimensions: 320/400/H100 mm -Weight: 33 kg

A generally overhauled blower type GMb 039 is offered.

Busch rotary vane vacuum RA 0250 D with 5.5 KW DS motor, 250 m3/h, Final pressure: - 0.5 mbar, completely overhauled with all wearing parts, 1 year warranty

Welding turning and tipping-positioning table Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster -Massea cables -Welding current transmission 500 A -Table height at horizontal position 1850 mm -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg