rotary transfer machine used for sale

Table diameter 1450mm Max working diameter 1600mm Max height under crosstravel 1000mm Nr. 02 RAM Visualization by DRO 4 axes Good working conditions Machine weight18 ton

Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 215 to 274 mm, 41 mm high -Drawing with the photos -Number: 2x counter bearings available -Price: per piece -Dimensions: 505/180/H295 mm -Weight: 19 kg

Table length: 10.800 mm Table width: 1.000 mm Table height: 200 mm Load capacity: 10 t/m Power motor spindle: 22 Kw Max. speed of turning: 1.700 rpm X Axis travel: 7.000 mm Vertical axis travel: 2.000 mm RAM travel: 1.000 mm Total installed power: 60 Kw Rapid feed rate: 15 mt/min CNC ECS 4801 Chip conveyor

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 85 by 120 mm 25 mm high -Drawing with the photos -Dimensions: 235/100/H270 mm -Weight: 15.5 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 136 by 178 mm 31 mm high -Drawing with the photos -Dimensions: 330/90/H220 mm -Weight: 13 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 96 by 129 mm 22 mm high -Drawing with the photos -Dimensions: 290/80/H190 mm -Weight: 12.5 kg

M.Bäuerle CAS 52/4 Art; Online folding machine with H+H feeder; 4 folding pockets; 3x Ionosation; Investment table 150cm; Max inlet width 520mm; may also be operated with other investors or upstream systems; Meter reading 4.5 million Online folding system M.Bäuerle CAS 52/4 Art; with feeder H+H; 4 pockets; 3x ionization; feed table 150cm; max.width 520mm; ca be used with other feeders or systems; counter only 4.5 mio.

Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 160 x 45 mm -Clamping depth: max. 250 mm -Dimensions: 470/290/H160 mm -Weight: 40 kg

Machine vice, vice, drill press vice -Jaw width: 155 mm -Back height: 80 mm Clamping depth: max. 200 mm -Dimensions: mm -Weight: 35 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 20 mm -Thread: right -Dimensions: 200/70/H85 mm -Weight: 1.9 kg

Used Hamba packaging machine for 75 mm cups. Capacity depending on the product up to 6400 cups per hour. Modernized in 2007.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW at 2820 rpm at 50 Hz -Voltage: 400 volts -Shaft mounting: Ø 30 mm -Dimensions: 430/230/H145 mm -Weight: 33 kg

Machine vice, vise, drill press vise -Jaw width: 160 mm -Jaw height: 50 mm -Clamping depth: max. 105 mm -Dimensions: 460/163/H123 mm -Weight: 38.3 kg

Used packaging machine with dispenser for Jumbo ice cream cakes and desserts. Year of construction 1996. Double-head (double-sided feeding) + topping + juice pump. Capacity 100 L / h. Power supply 220 V. Actuators 0.05 kW.

Type: Robot 500 Continuous vacuum filler for straight filling and portioning Integrated vacuum pump Double screw Standard double screw housing Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Lenght: 80 Height: 155 Delivery time: after advanced payment machine is generally refurbished and ready for delivery

Machine lamp, machine lamp, work area lamp -Lights: are not used -Dimensions: 270 x 105 x H 65 mm -Connection: 24 V DC 2x6 W -Number: 1x lights available -Price: per piece -Weight: 8 kg/piece

Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Key data: 1000 , 194 , 45

Manufacturer: Arburg Type: 420 C 1000 - 350 Built: 1999 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool installation height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 45 mm Lifting volume: 230 cc / 194 gram PS Spray pressure: 1670 bar General Engine: 22 kW Heating: 8.8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 3430 kg Screen text: German

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1120 rpm -Shaft mounting: Ø 30 mm -Quantity: 1 available -Dimensions: 985/290/H185 mm -Weight: 68 kg

Key data: 1300 , 166 , 40

Manufacturer: Arburg Type: 420C 1300 - 350 Built: 2000 Control: Selogica Closing type: Hydraulic Closing force: 1300 kN Tie bar ratio: 420 mm x 420 mm Plate size: 605 mm x 605 mm Tool installation height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 40 mm Lifting volume: 182 cc / 166 gram PS Spray pressure: 2120 bar General Engine: 22 kW Heating: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 4080 kg Screen text: German Optional extras Robot interface Core pull x2

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1720 rpm -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 910/290/H190 mm -Weight: 58 kg

X axis travel 1000 mm Y axis travel 700 mm Spindle travel 300 mm Table dimension 1.100x842 mm Spindle speed 40-2000 rpm Max power input 10 kW Spindle motor 8 HP Total permissible load on worktable 1 ton Machine approximate weight 15 ton

Table diameter 2.000 mm Working diameter 2.000 mm Machine under retrofit/rebuilding to install CNC Mechanical ready, totally rebuilt.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1420 rpm -Shaft mounting: Ø 30 mm -Quantity: 1 available -Dimensions: 670/290/H190 mm -Weight: 57 kg

Vertical lathe KOLOMNA 1540 T CONVENTIONAL MACHINE READY TO INSTALL Spindle diameter 4.000 mm Working diameter 4.140 mm Max working height 2.060 mm Ram travel 1.250 mm Weight over spindle 100 ton Motor power spindle 100 kW Boring/milling unit included Nr.02 RAM with visualization by DRO Excellent conditions, mechanical really like a new.

Thread cutter, tapping machine, tapping machine -Integrated reversing gear with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts -Weight: 2.3 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 2.4/3.3 kW 1720/3420 rpm at 50 Hz -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 660/290/H185 mm -Weight: 61 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1410 rpm at 50 Hz -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 660/280/H185 mm -Weight: 52 kg

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 2.35/3.3 kW 1420/2850 rpm at 50 Hz -Shaft holder: Ø 30 mm -Dimensions: 665/290/H180 mm -Weight: 61 kg

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE

beading machine, hand beading machine, flanging machine, seam closing machine, manual beading machine -max. sheet capacity: 1.0 mm -Projection: 200 mm -Tool holder: Ø 24 mm -Stop plate: adjustable -Dimensions: 750/700/H1500 mm -Weight: 120 kg

Threading machine, pipe thread cutter, thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -for pipe size: max. 2 inches -Cutting jaws: 1/2-2 inches -Operating voltage: 380 volts -Weight: 100 kg

SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens. ASK FOR EVERY MODEL OF MEP MACHINES, WE HAVE THE BEST PRICES IN EUROPE

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE

Control CC 100 for ENGEL injection moulding machines

Used 4 flanges fit on a JUNG, HF 50 (R or RD) Scope according to pictures ! ( 4 flanges , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 4700 rpm at 80 Hz -Voltage: Y 400 volts -Shaft holder: Ø 32 mm -Tool -Dimensions: 645/235/H150 mm -Weight: 55 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 63 mm -Clamping depth: max. 170 mm -swivel -Dimensions: 530/330/H170 mm -Weight: 67 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 6.6 kW 8915 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 35 mm -Dimensions: 520/247/H145 mm -Weight: 41 kg

Siemens Small X-ray / Intraoral Device Heliodent MD with tube SR 60/70/7 0.7 • Before takeover, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "IST" state from the freiberg (EXW), Saxony, Germany, and prepayment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation and configuration of the system or parts must be carried out by a specialist or technician authorized by the manufacturer! • The offer is subject to interim sale.

Spreading attachment PIETSCH STA 1.7 MW series 2000, capacity 1.7 m3, conveyor belt, tarpaulin folding roof, spreader rubber, drive via vehicle hydraulics, with remote control and support supports. Sale as is or in parts possible.

Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC

Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 5820 rpm at 100 Hz -Power: 3.7 kW 17350 rpm at 300 Hz -Voltage: 220/220 volts -Shaft holder: Ø 24 mm -Dimensions: 355/125/H210 mm -Weight: 20 kg

Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Mobile Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.