136,405 used machines on RESALE, but how to find them? Machine Search
Handtmann VF 610, vacuum filling machine for filling, portioning, linking, compact monitor control, filling capacity up to 3.000 kg/h, pressure up to 35/50 bar, up to 450 port./min. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany
used
Control cabinet for roller conveyor used from stock All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own ...
Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.
Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race
Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!
Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.
Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!
MADE directly from the manufacturer with PREMIUM quality stock items Description: -Conveyor belt / conveyor belt made of rubber for many applications in industry, agriculture and construction industry - new, coated on both sides, open, 2-ply reinforced bottom cover made of PVC, with mounted metal connectors made of stainless steel to the endless connect -Dimensions: 9.152 mm x width 600 mm x thickness length approx. 6.5 mm, surface with tunnels. -With 15 piece rubber studs, 50 mm high, 600 mm long, distance approx. 610 mm,. On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Statable VAT! Not is your desired size? No problem! We customize for you! More conveyor belts, drive belt and flat belt in all other sizes available immediately ...
used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
Maja SA 85 S compact flake ice machine, ice output 85 kg / 24 h, with integrated condensing unit. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
Double chamber vacuum packaging machine Komet SD 320, MC control, all stainless steel, high performance vacuum pump, electronic control, inlet plates for height adjustment. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
MAZAK laser cutting machine STX510 MKIII 4kW TOP CONDITION - LIKE NEW - ONLY 700 RUNNING HOURS year: 2012 refurbished, MAZAK lasercutting machine with 2500W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software incl. exhauster option: warranty, setup, training option: fully automatic loading/unloading CELL system
Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg
Maja SA 70 fragments of ice maker, ice power approx. 70 kg / 24 h, water consumption approx. 0, 07 m³ / 24 h, refrigerant R 404A. The machine can be visited like to 56070 Koblenz, and tested.
Handtmann FA 30 Top piston filling machine, piston filler for filling, portioning and linking. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany
JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T
Built in 2005 Capacity up to 35 pallets/h Film width 500 mm Max diameter 260 mm Core diameter max 76 mm Film thickness 17-30 mµ Equipment infeed belts delivery belt
Built in 2009/2005 Size min. 100 x 120 mm Max 300 x 430 mm Thickness Film thickness 20-100 mµ Mechanical speed 25,000 CPH Equipment 10 stations rollstream ROS 1 VSE-ROS-ES-RE-300-KWE twin multi disc unwind station 4 MTD AWS OWK built in 2005 JET feeder 8 JEF-450-FVM SA190 built in 2005 foil wrapping machine CMC 2800 with two feeders built in 2009 twin stacker CMC
Ziehm Vision RFD 3D is the world's only 3D C-arm with flat-panel technology that provides a 16 cm edge length per scan volume combines 2D and 3D functionality to offer maximum intraoperative control. THE ULTIMATE C-ARM TO OUTPERFORM The treatment of cardiovascular and degenerative musculoskeletal conditions calls for high-performance intraoperative imaging technologies. Incorporating the latest CMOS technology for excellent image quality, the Ziehm Vision RFD is the ideal product. In addition to the cardiovascular-focused 20.5 cm x 20.5 cm flat-panel version, the Ziehm Vision RFD is available with a 31 cm x 31 cm CMOS flat-panel detector. This is the preferred model for highly demanding orthopedic, trauma or cardiovascular interventions that require more information in one image. Both systems are equipped with a powerful generator for optimum penetration, Advanced Active Cooling to e ...
Built in 1991 Size max 700 x 1,000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m / min Suction equipment continuous stream feeder counter IZVA 341 1st folding unit: 4 buckle plates rear-mounted slitter shaft 2. rear-mounted slitter shaft noise prevention 2nd folding unit: 4 buckle plates rear-mounted slitter shaft noise prevention folding 3rd unit: 2 buckle plates rear-mounted slitter shaft delivery: belt delivery
specifications: - Load capacity positioning base approx. 750 kg - Flatplate diameter 500 mm - max. workpiece diameter 1600 mm - Height turntable with horizontal position approx. 750mm - Turntable with right,- + left run - Axis of rotation turntable endless 360 ° - Rotation time per revolution 12.5 sec. - Pan left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolt for clamping the workpiece in the middle of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder female thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space required approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - separa ...
HEIDELBERG Stahlfolder RFH 66/4 BCUH of 2007 16 pages combined. International - English & German fold A folding machine of 66 cm, config; -1St unit 4 x. Pockets, round pile feeder + 3 x. Knives KTL = 16 pages - int. English or German folds > > Option: VF-66 2006 - Mobile knife / total fold 32 pages < < Delivery St. Unit TSH 70 presser stacker Condition; VERY GOOD condition, immediately available, Can be lakes in our factory at Strasbourg FR
WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications: - Planning capacity 220 x 120 mm - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape
Vacuum stuffer Handtmann VF 100, vacuum filling machine for filling, portioning, linking, loading device, mc control, body all stainless steel, filling performance 3000 kg/h, pressure up to 55 bar, 420 port./min. You are very welcome to test the machine in Koblenz, Germany.
Built in 2001 Equipment opening station with sucker and sword main product feeder 10 insert feeders stream delivery 2 pressure vacuum pump
The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D ...
Neri ETA 400S self-adhesive vignette labeller for top labelling of cartons or similar objects. Carton size range (lying flat) from 40 x 110mm (W x L) to 165 x 360mm (W x L). Label size range from 10 x 13 mm (W x L), to 90 x 250 mm (W x L). Infeed via 400-capacity carton magazine, carton discharge via shingling conveyor for easy carton removal. Includes PCE label presence control with rejection of faulty labels and rejection crosscheck. Capacity up to 250 cartons per minute.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2 NTE side labelling machines: Serial numbers: PHARMA 02 & PHARMA 03 Year of production: 2004 Both labelling machines are fitted with Leuze Electronic reject systems. Label height: 110mm Conveyor width: 180mm Condition: good Dimensions: 850mm x 1.350mm & 1.050mm (LxW&H)Price per machine: 2.500 EUR Price combined: 4.500 EUR
Model: KRONES Solomatic Type: K018-xx1 model: 1200-25-480-6-5-160 Year of construction: 2003 Capacity: 36,000 to 40,000 fl./h Running direction: Left machine Feeding: Linear, straight Unit: fuselage PWL300, back PWL300 Glue roller: Steel glue roller Guide: 1x inlet star, 1x outlet star Label-L=: min. 40mm, max. 160mm Bottle-D=: min. 50mm, max. 125mm Voltage: 220/380 V Tags: Torso, Chest, Back Machine dimensions : 2.80 x 2.85 meters. The dimensions refer to the base frame without procors of the units and spout extension, as well as electrical cabinet (80x40x240cm). Price ex location: "As Is" Condition please inquire Price ex location: in refurbished condition on request.
Rebuilt 2006 Cutting width-1.850 mm Feeding height 165 mm max Feeding depth 1,850 mm max Front table length 730 mm Table height 900 mm Equipment air table program cutting line indicator 2 knives pile lift PL 3 Jogger Vibro Info: computer modern cut control
Roll length: 1250 mm max sheet thickness: 1.25 mm Roll diameter: 60 mm Length: 1780 mm Depth: 550 mm Height: 1030 mm Weight: approx. 230 kg
CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...
Westphal Mechanics C7x Commutator Slot Center Machine No. M64127 Year of construction: 09/2019 The commutator slot center has four processing steps. In the steps, the following components are approached: Contact slot saw Insulating groove saw Deburrs Brush The Stäubli TS 80 Robotor with SP1 control has two grippers that transmit the commutator to the individual stations. Software data: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC More information via this link. Further technical data will follow shortly. The roller straightening unit is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, ...
maximum number of results exceeded
please refine your search
