We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,433 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
-Turntable diameter approx. 1.3 m; -Material 12 mm steel; -Driven by turntable; -7 workpiece holders; -Diameter of each satellite table approx. 250 mm; -Load capacity per 20 kg max.; -satellites with rotary drive 10 to 60 rpm; -max. workpiece height approx. 300 mm; -2 stations with 8 powerful SES type S500 jet heads; -Air consumption per nozzle 2 m³/min, 6 bar; -One station vertically movable by geared motor 0.25 kW, max 600 mm, 4...20 mm/s; -One station can be moved horizontally by geared motor 0.25 kW, max 300 mm, 4...20 mm/s; -Feed sluice approx. 540 x 570 mm; -Workpiece blow-off station with ring conveyor 1.5 kW; -Dimensions of the working space approx. 2.3 x 2.3 x 1.2 m; -Lining with 5 mm rubber; -Control voltage 24 V; -Total power requirement approx. 5.5 kW; -400/660 V; -Space requirement of the installed system approx. 5 x 3.7 x 4 m; -Height for transport appr ...
used
Turning table, 180 Locking table, rotary table with aluminium plate Positioning table, rotary table, round dividing table 180 Turntable: 1080 mm Height to top edge Turntable: 630 mm - Turntable made of 25.5 mm thick aluminium plate with various holes - Very stable bearing turntable, rotatable by hand- 2 index locking positions 180, manual via foot lever for unlocking - stop damper under the turntable for the locking positions - very stable steel substructure - Flange plate steel substructure L x W x H = 600 x 600 x 20 mm Space requirement x H: 1080 x 630 mm Weight: 210 kg good condition 2 pieces available, price per piece; used
used
Clamping table, sinusoidal table, swivel table Swivel-clamping table Table length: 1130 mm Table width: 300 mm Table height: 112 mm Folding angle: 2 Folding angle: max. 7- folding angle 2 via threaded spindle folding angle max. 7 manually raised to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg good condition Ideal for making wedge strips; used
used
Packing table, shipping table, packing table ROCHOLZ Table length: 2000 mm Table depth: 800 mm Working height: 860 mm Table top: 20 mm Load capacity: 100 kg - Frame profile made of square tube - Shelf 1430 x 200 mm- Cutting device for foil and paper, cutting width 1250 mm- Upper shelf with 7 compartments (width = 180 mm, height = 300 mm), division over 8 mm removable plug-in bracket- Scope of delivery as shown Overall height without upper plug-in brackets: 1900 mm Overall dimensions L x W x H: 2000 x 920 x 2200 mm Weight approx. 70 kg good condition; used
used
Liquidation of ILPRA automatic traysealer of the FOODPACK series, model 500 v/g. It is a traysealer of Italian manufacture, with rotary table in 2 positions. The machine can perform 4 different packaging functions: sealing only, vacuum/sealing, vacuum/sealing/modified atmosphere (MAP). It is suitable for the use of a wide range of packaging of any material (PP, PS, APET, CPET, cardboard, etc.) using compatible film. Foodpack 500 has been designed to offer a compact solution (occupies just under 2 m / 2 ) and allows, thanks to a high technological content, to meet high production needs (up to 1440 pieces / hour) depending on the type of mold from 1 to 4 containers per cycle. The solidity and versatility of this model, together with an optimal value for money, have made the Foodpack 500 V/G one of the most successful machines. Built with first class components, with exclusive noble materia ...
used
There are 10 identical SIHN ring piece rotary transfer machines available. Parts: Rotary indexing table, clamping device, clamping cylinder, vertical and horizontal drilling units, feed unit, vibration conveyor, hydraulic unit, housing, control system, various pneumatic assemblies. Power: 25kW-38kW, working pressure: approx. 6bar, weight: approx. 4500kg-6500kg. The rotary transfer machines are only sold as a package. Individual machines cannot be sold separately.
used
Automatic rotary traysealer from the manufacturer VC999, model TS900. It is a traysealer made in Switzerland, with rotary table in 4 positions. The machine is prepared to make up to 4 containers at the same time: only sealing, empty/sealing and vacuum/sealing/modified atmosphere. It is suitable for the use of a wide range of packaging of any material (PP, PS, APET, CPET, cardboard, etc.) using compatible film. VC999/TS900 has been designed to offer a compact solution (occupies just under 3m3) and allows, thanks to a high technological content, to meet high production needs (up to 2400 pieces / hour). The solidity and versatility of this model, together with an optimal value for money, have made the VC999/TS900 one of the most successful and highest quality machines on the world market. Built with first-class components, with exclusive noble materials (stainless steel and anodyne ...
used
Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...
used
table diameter:1400 mm x-travel:2200 mm y-travel:1200 mm z-travel:1100 mm c-axis:360.000 x 0,001 b-axis:+/- 60 ° w-axis:350 mm distance spindle center to column::1100 mm table load:6 t spindle drive:15 kW Torque:4600 nM spindle turning speed range:10 - 1600 U/min spindle taper ISO:50 no. of tools in the magazine:20 Stück total power requirement:45 kW weight of the machine ca.:30 t dimensions of the machine ca.:5,8 x 5,8 x 4,9 m Machine complete overhould and retrofit in 2001 with SIEMENS 840 D control for 6 axis - tool changer for 20 tools - spindle quill 350 mm as W-axis - rotary table as C-axis - angualar milling head indexable - oil cooler, chip conveyor, hand operating panel.
used
Type: 62416, rotary wheel valve with pre-valve flat slider, drive via spur gear motor with 3 kW / 42 rpm. Little ran.
used
Type: 9.3-456, Y.O.M.: 1991, inlet: 400 mm x 400 mm, overhauled, without motor.
used
Built: 1991, inlet: 400 mm x 400 mm opening, overhauled, without drive.
used
Inlet: 380 mm x 480 mm, wheel with upstream slide valve, driven by cylindrical gear drive with 3 kW / 42 RPM, only few funning hours.
used
132 kW, max. 7,5 bar, 24,2 m3/min, New srew.
used
Stainless steel pumps, Hilge, Fristam, various versions and sizes
used
Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new
used
Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale
used
Workspace tip height 102 mm centre distance - with normal headstock with 450 mm - reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm spindle poles spindle nose for collets type Schaublin W25 spindle bore 25 mm collets passage 20 mm reduction ratio of 1:5 Raedergetriebes cheek height x width x length 168 x 130 x 1000 mm cheek from cast iron, trapezoidal profile as lathe 102 N and dovetail, hardened and ground. Sledge greatest way on the cheek width 400 mm runner - length 90 mm top runner above 80 194 mm way manual adjustment 20 mm shank of tools 12 x 12 mm cross slide width length 94 300 mm way manual adjustment 100 mm bed slide length of leadership on the cheek 250 mm screw lead screw for longitudinal turning and threading, Ø 40 mm screw hardened, Ground thread, slope 4 mm speed range RPM 270 3000 rpm turning 0.02 0.3 mm / Rev. Tapping largest slope ...
used
160 kW, max. 7,5 bar, 27,4 m3/min, year 1998.
used
132 kW, max. 11 bar, 20,3 m3/min. Air end new in 2001 and has 38000 working hours.
used
55,0 kW, max. 10 bar, 7,4 m3/min, YOM 1991
used
200,0 kW, max. 10,00 bar, 30,00 m3/min. Oil-free, water cooled. Excellent condition.
used
200,0 kW, max. 7,5 bar, 36,18 m3/min. Condition like new. 2 pieces available.
used
90,0 kW, max. 8,0 bar, 15,12 m3/min. With built-in compressed-air dryer refrigerant R 404a. Oil, oil filter, air filter and oil separator are new.
used
Rotary screw air compressor Atlas Copco 200 kW, max. 20 bar, 21,66 m3/min. New elektronikon controller at 20000 total hours. Real working hours 21409
used
110,0 kW, max. 8,5 bar, 18,72 m3/min.
used
75 kW, max. 10,0 bar, 10,35 m3/min.
used
250 kW, max. 10,0 bar, 35,88 m3/min.
used
160,0 kW, max. 7,50 bar, 27,40 m3/min, oil-free, air cooled.
used
Rotary Screw air compressor, 75.00 kW, 3 x GA 808 and 1 x GA 810
used
75,0 kW, max. 10,0 bar, 14,02 m3/min. With frequency inverter. Volume flow 14,02 m3/min at 7 bar.
used
1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.
used
90,0 kW, 10,0 bar, 15,0 m3/min. With frequency inverter. Volume flow 2,4 - 15 m3/min at 7,5 bar.
used
110 kW, max. 12,0 bar, 16,10 m3/min. Volume flow 16,1 m3/min at 10 bar.
used
90,0 kW, 8,0 bar, 12,78 m3/min. oil-free, air cooled.
used
75,0 kW, max. 13,0 bar, 13,80 m3/min. With built-in frequency inverter. Volume flow 2,0 - 13,8 m3/min.
used
75,0 kW, max. 8,50 bar, 12,28 m3/min. With built-in frequency inverter. Volume flow 2,89 - 12,28 m3/min.
used
45,0 kW, max. 10,0 bar, 6,10 m3/min. With frequency inverter. Volume flow 1,5 - 6,1 m3/min. New air end in 2008 at 51000 working hours.
used
45,0 kW, max. 7,50 bar, 6,06 m3/min. Oil-free, air cooled.
used
75,0 kW, max. 7,50 bar, 13,80 m3/min. Condition like new.
used
132,0 kW, max. 9,0 bar, 22,90 m3/min. With energy recovery. Condition like new.
used
160 kW, max. 7,50 bar, 30,30 m3/min. With built-in compressed-air dryer.
used
315 kW, max. 10,0 bar, 41,20 m3/min. Oil-free, water cooled. Voltage 3300V, 3ph, 50 Hz. New controller Elektronikon Mk4.
used
160,0 kW, max. 7,50 bar, 22,70 m3/min. Oil-free, air cooled
used
75,0 kW, max. 7,50 bar, 12,90 m3/min.
used
132 kW, max. 10 bar, 18,3 m3/min. Oil-free, water cooled
used
160 kW, max. 10 bar, 25,10 m3/min.
used
75 kW, max. 10 bar, 11 m3/min. 2 pieces available.
used
90 kW, max. 8 bar, 14,98 m3/min.
used
400 kW, max. 8 bar, 61,32 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 working hours.