rotary table grinding used for sale

Auction-ID: A1-46501-2079

Optimax TAS200 semi auto table strapper adjustable table height, Braking swivel castors, external manual strap tension adjustment

Auction-ID: A1-46501-2148

Table saw

Easycount CD5 tablet counter Serial: 51002040 Stainless, easycount will make a precise inventory of all hard and soft gelatin capsules and most sizes and shapes of tablets, fill all kinds of containers exactly and automatically, check number of full containers at any time and identify how many pieces have been counted in the last and incomplete containers, 1Ph

Manesty D3B tablet press Serial: 24D117 Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph

Manesty D3B tablet press Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph

Auction-ID: A1-45973-18

10 pcs for more details see photos nameplate Auction-ID: A7-46619-348

Equipped with Hydro unit Auction-ID: A1-45845-36

Equipped with Hydro unit Auction-ID: A1-45845-35

Measuring table 1,000 x 1,000 mm, with base cabinet

Equipped with Hydro unit Auction-ID: A1-45845-38

Equipped with Hydro unit Auction-ID: A1-45845-37

Technical description : CLAMPING/ MOUNTING TABLE - Length 2600mm - Width 1500mm - Height 250mm

Plate intermediate table MDT 480 C-800; condition outdated; new engines; new tapes; .max. Printing plate size 811x1200mm; Inlet and outlet sensor; height adjustable. Plate conveyor Grafoteam MDT 480 C-800; condition rebuilt; new motor; new belts; max.plate size 811x1200mm; in and outfeed sensor; adjustable in hight.

-Year 1990, Jogger with air press roller -Max paper size 1450x1130 mms. -Blowing plane -Folding squares on both sides -Height of introduction 16.5 cm -Max operating pressure 6-7 bar -380 V power supply

S.No.: 033001 Format: max. 450x310mm; at least 185x128mm; Stack height: max. 320mm Equipment / additional information: Stacking options: smooth or offset to the side - compatible with: Horizon MC-80a Horizon VAC-100a Horizon VAC-60Ha Horizon VAC-1000 Horizon VAC-600

Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG

table length:630 mm table width:200 mm no. of flutes:3 weight of the machine ca.:55 kg

weight of the machine ca.:50 kg dimensions of the machine ca.:660 x 460 x 280 mm no. of flutes:3 groove width:14/24 mm surface area:570 x 460 mm

Cast iron bed 1305 x 800 x 100 mm - No 1 Length: 1305 mm Width: 800 mm Thickness100 mm Height on feet: 510 mm T-slots dimensions: 40 x 25 mm Weight: 500 kg

Swivel rotary table Ø 1000 mm Shelf diameter: Ø 1000 mm x height 650 mm Rotation at 360° Vertical swivel Weight: approx 650 kg

Round distribution table / indexing table (Ageha-Zeatz) with manual operation.

Diameter 800 mm

table length: 1500 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,8 t dimensions: 1,5 x 1,5 x 0,9 m Welding table SIEGMUND Professional Extreme 850 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter 600 mm

Cross table with swivel plate Table length 430 mm Table width 240 mm x-travel 225 mm y-travel 160 mm Table height 160 mm T-slots 12 mm Weight 45 kg Dimensions L x W x H 0.6 x 0.45 x 0.2 Condition: never used / new (5)

including drain duct

Stored in working condition, buyer must provide transport himself. Elevator available.

table length: 1500 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,8 t dimensions: 1,5 x 1,5 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Peddinghaus Peddimaster 80/110 punching shearing machine; with PEHU X-Y coordination table and many accessories; powerful and easy-to-use machine for punching and shearing operations; Voltage: 380 volts ; Punching capacity: 80 TON; Shearing capacity: 110 TONS; With PEHU coordination table ; Weight approx. 2200 kg

table length: 1000 mm table width: 500 mm height: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including various clamping material

Cincinnati Milacron PE 15 Bench Drill Machine; complete with machine clamp and suitable for precise drilling work; Voltage: 380 volts ; Speed: 330–6000 rpm ; In neat condition; Complete with machine clamp

Table size 400 mm Table height 410 mm Table adjustable horizontally – vertically Tilt range 0 to 90 degrees Manual angle adjustment. Load capacity Vertical : Up to 8.000 kg Horizontal: Up to 1,500 kg (freestanding) or 4,000 kg with counterbearing Drive table AEG M42953-10 Permanent Magnet DC Servo Motor

Ref. 443 Light table Mega steel Type 399-3 Fabr. - Order No.: 93-674 Year of construction 1993 Table size: 70 x 100 cm Table top diagonally adjustable Height infinitely adjustable motorized from 85 to 115 cm Light source: 2 fluorescent tubes

4x NRC XL-A pneumatic insulation leg

Cross table with turntable Table length 330 mm Table width 220 mm x-travel 210 mm y-travel 125 mm Table height 150 mm T-slots 12 mm Weight 33 kg Dimensions L x W x H 0.41 x 0.35 x 0.22 mm Condition: never used / new (5)

Heavy machine table / clamping table with T-slots and lifting eyes, suitable for clamping workpieces on milling machine or machining center. Size: 800x800x600mm.

Heavy machine table / clamping table with T-slots and lifting eyes, suitable for clamping workpieces on milling machine or machining center. Size: 800x800x600mm.

Manufacturer: Metall Meister Type / Model: not known / not specified Mobile tool trolley / assembly table with cast aluminium chipboard (T-slot) Mobile tool trolley / work table Steel frame construction with castors, cast aluminium plate as work surface Design of the work surface: Cast aluminium plate with T-slots Suitable for clamping, assembly and straightening work Condition: Used Work surface: approx. 1200 × 800 mm

Condition: used and unchecked.

Cross table with swivel plate Table length 225 mm Table width 175 mm x-travel 120 mm y-travel 110 mm Table height 140 mm T-slots 12 mm Weight 17.5 kg Dimensions L x W x H 0.35 x 0.35 x 0.22 mm Condition: never used / new (5)

Technical data for the picking rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of fields / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 07 pcs. Note: The advantage at a packaging table or at a Picking rack is that has all the tools needed & accessory materials used to create the product are always at hand. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts Weight / pcs.: approx. 5,50 kg The stands are pre-assembled 1,200 mm high 610 mm deep 07x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly  ...

1 piece packing table Table dimensions: approx. 1,610 x 850 mm Table height: approx. 870 mm height-adjustable storage level: approx. 1,520 x 400 mm Storage level with plug-in compartment dividers (4x small, 3x large) total height: approx. 1,970 mm Condition: used fully functional slight sticker residues and signs of wear may be present In total, there are almost 20 pieces for sale. A visit can be made by appointment. Conditions: Self-collection by telephone arrangement from location 53783 Eitorf. Price: EUR 349,- (gross) per piece Invoice with selected. VAT.

Circular table saw Elmag with sliding table The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Affeldt roller conveyor tables 1000-531-237 mobile, two-part RA1292 The staging roller conveyors have two parallel roller conveyors and have a mobile base frame. This makes them flexible to use. They are in good condition (used). Technical data: Manufacturer: Affeldt Type: Roller conveyor 1000-531 Year of manufacture: unknown Condition: good (used) Conveyor length (FL): 1000 mm nominal/outer width (NB): 531 mm Conveyor width total: 531 mm Conveyor width single: 2 x 237 mm roller pitch: 34 mm Height OK roller: 850 mm adjustable +/- 50 mm Scope of delivery: with base frame and swivel castors Availability: 7 pieces Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. W ...

Key data: 130 mm, 3000 mm, 2000 mm

Inv. Num. : 6957 Type: WHN 13 Produzent: TOS Erzeugt: 1976 Parametern: Arbeitstischlänge: 1800 mm Arbeitstischbreite: 1800 mm Maximale Tischbelastung (gleichmäßig): 120.000 kg Verfahrwege X-Achse: 3000 mm Verfahrwege Y-Achse: 2000 mm Verfahrwege Z-Achse: 800 mm Spindeldurchmesser: 130 mm DRO