rotary table 4000 used for sale

Size: 1.800 x 4.000mm - Year of Manufacture: 1998 - With Electrical motor (11 kW/6), Cardan shaft and springs - Will be overhauled, sandblasted and painted.

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Grey , Flywheel Housing SAE: SAE 00 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: YES , Starter Voltage: 24 Volt , Rated Power: 880 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-8v-4000-l63-used/190, , = More information =, , Type: Engine, Type of fuel: LPG, Type number: 8V 4000 L63; Transport weight [kg]: 4550

Key data: 650 mm, 1500 mm

Year of construction 2014, commissioning 2017 OSP P300S Controller Travel: X1/X2 axle: 695/235 mm Y-axis: 300 mm Z1/Z2 axle: 1,600/1,461 mm B-axis: -30° to +210° Max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11, max. speed: 3,000 rpm, Max. torque: 955 Nm, bore 112 mm Hollow Clamping Cylinder SMW VNK320-127, Bore 127 mm 3-jaw chuck Forkardt 3QLK 315-88 Z11 Pressure reducing valve 8-70 bar Milling spindle 22 kW, max. speed: 12,000 rpm Tool magazine with 40 tool positions, HSK-A63 Lower turret with 12 tool stations Self-centered bezel on the lower turret Hydraulic bezel SMW SLU-X-3.2-ZS, clamping range: 50-200 mm Programmable tailstock Renishaw RMP Probes Drum trough filter TMF300 with 980 L tank 8 bar circulation pump 70 bar high pressure pump Hinge belt chip conveyor Tool monitoring system for tool life and breakage Tool measur ...

Lathe LABOR E 300 Brand: LABOR Model: E 300 Year of construction: 1994 Chuck size: 380 mm Center height: 300 mm Maximum turning length: 4000 mm Bed length: 5250 mm Bar capacity (spindle bore): 100 mm Self-centering chuck: Yes Four-jaw chuck: No CE Certification: Yes Overall dimension: 7000 mm x 1500 mm x 1500 mm H Our internal ref. 779

pressure: 185 t chamfer lenght: 4000 mm distance between columns: 4100 mm Control: Cybelec VisiTouch 24MX stroke: 300 mm dayligth: 500 mm : 175 mm/s bending speed: 0-12 mm/s total power requirement: 22 kW weight of the machine ca.: 15.500 kg dimensions: 4970 x 3260 x 2090 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 4000 mm distance between columns: 4100 mm Control: Cybelec VisiTouch 24MX stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 18 kW weight of the machine ca.: 13.000 kg dimensions: 5080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible.

A paper filling system for dispensing packaging paper is available. Speed: 85m/min, operating modes: 3, grammage: approx. 50g/m²/70g/m². Machine dimensions X/Y/Z: approx. 910mm/910mm/1650mm, weight: approx. 25kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The image is a sample unit.

Several air cushion machines activaTec are available. Production speed: 15m/min, film thickness range: 13mm-40µm, roll length: 700m/1500m. Machine dimensions X/Y/Z: approx. 315mm/300mm/315mm, weight: approx. 10kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture shows an example unit.

• Brand: C.M.I, • Model: BF 4000, • Serial No.: 0046, • Year of construction: 2006, • Operating hours: approx. 4,500 h, • Weight: 62 t (without accessories), • No-load shaft speed: 3 rpm

CNC Portal Plasma Cutting Machine with Skew Rotator Bevel Bevel Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2020 CNC Control: Global Control Plus Working area: 3 x 12 m Track width: 4,000 mm 1 oxy-fuel burner ALFA 1 plasma torch with Skew Rotator Bevel bevel unit Power Source Hypertherm XPR300 Cutting thickness: 50 mm hole piercing 80 mm cut-off Extraction table Beuting without filter system Software: Omniwin with Bevel

x-travel: 14000 mm y-travel: 4480 mm z-travel: 3000 mm w-travel: 300 mm table:: table load: (145) 450 t table width: 3100 mm table length: 14770 mm Passage height: 3800 mm passage width: 3200 mm diameter of quill: 305 mm spindle turning speed range: max. 600 U/min spindle motor: 100 kW rapid travel x/y/z: 12 / 6 / 6 m/min output: 100 kW quill:: ISO 60 control: SIEMENS 840 D Powerline total power requirement: - kW total wight: - t dimensions of the machine ca.: - m Complete retrofit in 2010 - Siemens 840D powerline CNC control - Table guide: hydrostatic -- Hydrostatic system redesigned for max. load of 450 tonnes (with even load distribution) - Orthogonal milling head ISO 60 - Angle milling head ISO 60 - Additional attachment heads available that have not been used to date (extra option) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Maximum pressure: 32 tons Pressing force: 4.33 kg/cm2 Number of bindings: 4 horizontal Channel cross-section: 820 x 900 x reg mm Dimensions of the tailgate: 82 x 135 cm Bale weight: bos 400 kg Weight: approx. 6.1 tons Power connection: 380 V/ 22 kW Bale tying: automatic

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximale diameter onderdeel: 200 mm Balansringprocedures volgens ISO 1940 PC-gebaseerde grafische interface HSK 63 Gereedschapsinstelling: 9BB4KP00002000 Softwareversie: R150F09 make:: 230V Distance between centres :: 600 mm Weight of workpiece :: 20 Kg max

CNC portal milling machine TYPE: LF3550/4000CS Year of manufacture: 1966 / overhauled 2010 Manufacturer: Waldrich Siegen Control: CNC840D-Powerline Routes: X-axis 14,000mm table longitudinal Y-axis 4.480mm slider-transverse Z-axis 3,000mm crossbeam vertical W-Axis 300mm Quill Vertical Max. Passage: transverse 3.200mm high 3.800mm Machine table: Length 14.770mm Width 3,100mm max. table load: 145 to Quill: Tool Taper: ISO60 Power: 100KW Max. torque: max. speed 600 rpm Rapid traverses: X-axis 12m/min Y; Z-axis 6m/min Attachment heads: Voltage: manual Description: Right angle milling head (ISO60) Orthogonal milling head (ISO60) Notes: Table guide hydrostatic

A Miwe deck oven is available. Decks: 4, heating type: oil, heating circuits: 2, usable baking area: approx. 8m², oven width: 1200mm, oven depth: 1600mm, max. temperature: 300°C, machine dimensions X/Y/Z: approx. 1600mm/3350mm/2350mm, weight: approx. 2000kg. Including lifting table Unimetall SH 101. An on-site inspection is possible.

Key data: 1600 KW, 2000 kVA, 400 V

MTU 16V 400 L61 1600 kw 2000 kva Stamford PI743F2 1500 rpm 50hz 400Volt 18.000 hours after major overhauling Genset including control panel, Gasline, heat island with pumps and exhaust gas cooler Genset is located in our warehouse in the netherlands: Kranenpool 10 6443VA Brunssum NL check our website for more generators and accessories: generalpowerholland.nl

CONTROLS   CNC controls OKUMA OSP-P300MA WORKING RANGE -CUBIC-   X-axis travel: 560 mm   Y-axis travel: 560 mm   Z-axis travel: 625 mm SPINDLE / HEAD   spindle revolutions (max): 15000 /min X/Z SLIDE   number of tool positions (total): 12   number of live positions: 12   - rotation speeds (max): 5000 /min   - drive power: 5.5 kW TOOL MAGAZINE   number of positions: 146 AUTOMATIC WORKLOAD EQUIPMENT   number of store positions: 2   Workpiece diameter max.: 600 mm   worpiece length max.: 900 mm   pallet length: 400 mm   pallet width: 400 mm   number of pallets: 2 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS   chip conveyor: yes   coolant unit: yes  ...

Rondo Pastry Brake Dough Sheeter Econom 4000. Very lightly used and only for a short period of time. Table top machine which is 70cm tall when folded, 76cm wide when folded and 90cm long (105cm including the handle). 475mm Conveyor Belt. Up to 50kg pastry per hour. Full details can be found on the Rondo website. Sold as seen

Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

Used dough divider / head machine KÖNIG, type: Mini Rex 4000 - AB -in bakery condition- - Tested and cleaned - Strap in very good condition - Condition: Good, ready to use - Video on request - Number of rows: 2 rows - Output: max. 4,000 pcs./h - Weight range: 25 - 130 g - El. Connection: 1.3 kW, 3x 400 V+N, 6 A, 50 Hz Visits and test runs are possible by arrangement.

- 3 chuck ca 400 mm - Duplomatic 8 position revolver - Steady rest big 400 mm - Steady rets normal 300 mm   What It Does A CNC lathe like the Combi 4000 is used to: Turn shafts, cylindrical components, and other rotational parts by clamping a workpiece in a rotating spindle and feeding cutting tools along programmed paths. Perform precise facing, threading, boring, drilling, and contour turning operations under CNC control, which improves accuracy and repeatability compared with manual lathes. Typical Uses These machines are common in industrial settings such as: Automotive component production Aerospace parts manufacturing General engineering and tooling fabrication They are valued for robust construction, automated precision, and ability to handle medium-sized metal components efficiently.

CNC lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of Make: 2008 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret V12 (all places driven) Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 12 throat: 400 mm stroke: 220 mm dayligth: 480 mm : 140 mm/s bending speed: 0-10 mm/s : 110 mm/s total power requirement: 18,5 kW dimensions: 4500x2000x2900 mm weight: 13.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 t chamfer lenght: 4100 mm distance between columns: 3600 mm Control: Cybelec VisiTouch 24 stroke: 300 mm Arm length: 500 mm dayligth: 500 mm : 165 mm/s bending speed: 0 - 10 mm/s total power requirement: 32 kW weight of the machine ca.: 21.000 kg dimensions: 4850 x 2300 x 3520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Takisawa TS-4000YS was manufactured in 2021. It features a robust 6200 kg frame with a 30° inclined bed for stability and precision. Key specs include a 22 kW main spindle, 618 Nm torque, and rapid traverses up to 30 m/min. Its equipped with a dual spindle, Y-axis, and a 15-position turret for versatile machining. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-4000YS machine we have for sale. Contact us for more information.

This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, its ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine.

This Prima Power CP 4000 Zaphiro Laser Cutting machine was manufactured in the year 2013 and has 37978 laser hours. The machine has a laser power of 4 kW.

This 3-axis Zayer KF 4000 was manufactured in 1989. It features a large table of 4,000 × 1,000 mm, capable of handling loads up to 10,000 kg. Equipped with a spindle speed of up to 3,000 rpm and a power range of 30–37 kW, it ensures robust machining capabilities. Consider the opportunity to buy this Zayer KF 4000 universal machining centre. Contact us for more information about this machine.

This 4-Axis Daewoo ACE-HP 4000 horizontal machining centre was manufactured in 2006, controlled by a FANUC Series 18i-MB system. It features comprehensive travel dimensions: 600mm in X, 560mm in Y, and 565mm in Z, along with table rotation capability. The machine is equipped with spindle cooling, a chip conveyor, and external workpiece cooling, ensuring optimal operation. A robust choice for precision machining, it combines extensive operating hours with dependable performance. Reach out for further details regarding this horizontal machining centre.

This 3-axis ESAB Combirex DX 4000 plasma cutting machine was manufactured in 2012. It features the ESAB WELDING & CUTTING Vission 51 control and a Precision Plasmarc 368 plasma source. Capable of cutting up to 40 mm with plasma and 300 mm with gas, it offers a cutting area of 3000 × 13000 mm. Consider the opportunity to buy this ESAB Combirex DX 4000 plasma cutting machine. Contact us for more information.

This Plasma Cutting Machine was manufactured in 2014. It features a Hypertherm HyPerformance® HPR260XD plasma source and Hypertherm EDGE® Pro CNC control. The table size is 3000x1500mm, and it uses TurboNest® CAD/CAM software. It can cut black steel up to 38mm, stainless steel, and aluminum up to 25mm. A great opportunity to buy this ERMAKSAN ER 4000 Plasma Cutting Machine. For more information about this Plasma Cutting Machine, please reach out to us.

General SKU386W1190 Makechema No.35391 Year of construction2010 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume4000 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor Reactorcheck Capacity4000 l (4500 l) Vessel sizes1600 x 2500 mm Dished bottomcheck Dished top sidecheck Manholecheck (500 mm) Top connectionscheck With jacketcheck Max. temperature-10/ 100 °C With turbo stirrercheck Motor0.75 kW, 400 V, 1330 rpm Speed mixing shaft130 rpm Stainless Steel Reactors MaterialStainless steel 1.4301 (304) Information Floorspace2.5 x 2.5 m Total height3.5 m Weight2200 kg ATEX compatiblecheckStainless Steel ReactorsChemaReactors > Stainless Steel ReactorsBrand > Chema What you can expect from Foeth: -- Machine is in w ...

Horizontal BAZ DMG MORI NHX 4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar Chip conveyor Renishaw 3D - Pushbutton

CNC lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of Make: 2017 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret: V12 (all places driven) Equipment: - Chip conveyors - Touchsetter - 3-jaw chuck - Tailstock

The Marel TVM Portio 4000 is an industrial-grade portioning machine designed for the high-speed, precise cutting of meat products. Manufactured by Marel (specifically under their TVM line in the early 2000s), it is primarily used in commercial food processing to create uniform portions of fresh, cooked, or crust-frozen meat. Find more here - / Contact us at -

PRESS DESIGN   drive system: hydraulic SLIDE   total force (nominal): 400 to SLIDE (HYDR. PRESS)   working velocity max.: 120 mm/s COUNTER RAM   nominal force: 100 to V-RING   nominal force: 200 to

A Mazak HCN 4000 is a high-performance Horizontal Machining Center (HMC).In the world of CNC machining, the "HCN" (Horizontal Center Nexus) series is Mazak’s workhorse for high-speed, high-precision production Technical data: Travel distances: X-axis: 560 mm Y-axis: 640 mm Z-axis: 640 mm Table: Pallet size: 400 x 400 mm Number of pallets: 2 Indexing: 1° increments Spindle: Spindle mount: SK-40 Max. speed: 18,000 rpm Power: 35 kW Tool magazine: Capacity: 60 tools Equipment: Control: Mazatrol SmoothG Tool length measurement Cooling through the spindle at 32 bar Niagara flushing Air through the spindle Renishaw OMP 60 probe Renishaw Inspection + (version 2022) Tool ID system Chip conveyor Additional filter cartridges Thread cutting without compensation chuck G00 tilt function CE marking Find more here - / Contact us at -

General SKU358U924 LocationBarneveld MakeGuedu S.A. Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Motor30 KW Surface4 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface4,0 m² Capacity6050 l Vessel sizesø 2280 x 1800 mm Plate sizesø 2280 mm Top connectionscheck Solids outletø 270 mm Liquid outletDN 80 With jacketcheck Max. temperature-20ºC/+170ºC With stirrercheck Motor30 kW(400V, 1400 rpm, Ex) Stirrer speed20 rpm Stirrer can be liftedcheck With hydraulic unitcheck Motor4 kW (400V, Ex) MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Information TypeGRF 4000 Mach.No.960067 Year of construction1997 Mounted on legscheck Floorspace2,60 x 2,60 m Total height4,50 m Weight11000 kg ATEX compatiblecheckNutsche filtersGueduFilters > Nutsche ...

Injection moulding machine Arburg 820S 4000-4600 BJ 2016

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2006 CNC Control: Global Control Working area: 3 x 12 m Track width: 4,000 mm Track length: 15 m Extraction table 1 x Plasma torch with Hypertherm HPR260 1 x Plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filter system

This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information.

This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine.

General SKU267N238 LocationBarneveld MakeGerhard+Rauh GmbH TypeRZE counterflow column, DN900/700 No.6321 Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume4000 Ltr. Motor5.5 KW Specified Features - Extraction Capacity4000 Ltr Diameterdia. 700 mm Length10 m Max. temperature95 °C With rotorcheck Motor5.5 kW (230/400 V) With variable speed drivecheck Rotor speed88 rpm MaterialStainless steel 1.4539 (904L) Information Year of construction1996 Floorspace1,2 x 1,2 m Total height12 m Weight3000 kg ATEX compatiblecheck Technical specs Extra information-1/1 bar working pressureExtractionGerard + RauColumns > ExtractionBrand > Gerard + Rau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...

Horizontal BAZ DMG MORI NHX-4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar - 900 litre tank - paper belt filter Chip conveyor Preparation Renishaw 3D - Probe

General SKU298M407 LocationBarneveld MakeKaeser Kompressoren TypeWVC-4000 No.1002 Pressure Pressure buildup0.05 Bar Main Features Capacity61.1 m3/Min Motor11 KW Pressure0.05 Bar Specified Features - Blower Blower(1x) Capacity61,1 m3/min Motor11 KW, 400/690 Volt Inletdia. 200mm Outletdia. 200mm MaterialMild steel Information Year of construction2004 Floorspace1,5x0,55 M Total height0,5 M Weight480 KGBlowersKaeserBlowers > BlowersBrand > Kaeser What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU316S533 MakeHoeksma en Velt Zuivelwerktuigen (NL) LocationBarneveld Main Features MaterialStainless steel Volume4000 Ltr. Specified Features - Horizontal tank MaterialStainless steel 1.4401 (316) Horizontal tankcheck Capacity4000 Ltr. Top connections3100x1600 mm Outlet73 mm (2x) Motor1,3 kW 400 Volt Speed mixing shaft9,6/19 rpm. Information No.5656 Year of construction1967 Mounted on legscheck Floorspace3,8x1,8 M Total height1,8 M Weight1200 KgHorizontal tanksHoeksma & VeltTanks > Horizontal tanksBrand > Hoeksma & Velt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!