rotary press used for sale

Belt Repair Press Manuf.: Almex Daylight/clearance: 35 mm (can be made 45-50 mm) 100 PSI 380volt, 3 phase CE marked Presses can be used individually or in series””. Refurbished and in ‘as new’ condition 8 sections, 4 sizes 1. 2 pieces 483x1016 mm 362 kg each 2. 2 pieces 483x1524 mm 544 kg each 3. 2 pieces 483x1981 mm 707 kg each 4. 2 pieces 483x2388 mm 853 kg each

General SKU298Y565 LocationBarneveld CEcheck Specified Features - Bioreactor Material finishMirror polished inside With jacketcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume327 Ltr. Pressure4 Bar Specified Features - Bioreactor Capacity250 l. (327 l.) Vessel sizesø 850 x 850 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN30 Max. temperature0 / 145 °C With jacketvolume 35 l. Max. temperature0 / 145 °C With propellor stirrermagnetic stirrer Motor0,25 kW, 230/400 V, 2713 rpm Speed mixing shaft413 rpm Bioreactors MaterialStainless steel 1.4435 (316L) General MakeBaumgartner Serial440 Type250 L Year of construction2002 Mounted on legson wheels Floorspace1,20 x 1,20 m Total height1,90 m  ...

General SKU298Y572 LocationBarneveld CEcheck Specified Features - Bioreactor Material finishMirror polished inside With jacketcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume327 Ltr. Pressure4 Bar Vacuumcheck Specified Features - Bioreactor Capacity250 l. (327 l.) Vessel sizesø 850 x 850 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN30 Max. temperature0 / 145 °C With jacket35 l. Max. temperature0 / 145 °C With propellor stirrermagnetic stirrer Motor0,25 kW, 230/400 V, 2713 rpm Speed mixing shaft413 rpm Bioreactors MaterialStainless steel 1.4435 (316L) General MakeBaumgartner &: Co Serial437 Type250 L Year of construction2002 Mounted on legson wheels Floorspace1,20 x 1,20 m Total h ...

General SKU299Y586 LocationBarneveld MakeVanguard Main Features Tablet Diameter16 mm Specified Features - Rotating tablet press Rotating tablet presscheck Number of stations:16 Without punching diescheck Tablet sizesmax 16 mm Filling depthmax 7 mm With motor2,2kW, 380V, 4400rpm With frequency controllercheck Capacity14400-28800 tab/h With hoppercheck MaterialNickel alloy (201) 2.4068, Stainless steel 1.4301 (304) General Serial203145 TypeVSP-16 Year of construction2009 Floorspace0,75x0,8 m Total height1,7 m Weight820 kg Extra SpecificationsThe machine will be sold as is”Generic medicinesRotating tablet pressesConfectionerySolid pharmaceuticsVanguardIndustries > Pharmaceutical > Generic medicinesPresses > Rotating tablet pressesIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsBrand > Vanguard What you can expect from Foeth ...

pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm diameter of piston: 130 mm work speed: min. 2 m/sec work speed: max. 9,8 m/sec return speed: 20 mm/sec Max. pressure: 200 bar weight of the machine ca.: 0,65 t total power requirement: 4 kW dimensions of the machine ca.: 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled ...

CONTROLS   PLC Press tool size Total weight max. 9,000 kg Weight of upper part of tool max. 4,500 kg Dimensions max width x depth 3,000 mm x 1,800 mm Tool height max. 1,300 mm The turning table is as good as new. The pictures are example pictures. The original is grey, otherwise exactly the same.

Deblister machine Manufacturer: RBP Bauer GmbH Type Press out Model EC

Bookbinding press for gluing Muro 4 x 5000 A3/HAD - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Bookbinding press for gluing Muro 4 x 5000 A3/HAD Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Bookbinding press for gluing Muro 4 x 5000 A3/HAD Price: 3600 EUR Download PDF Bookbinding press for gluing Muro 4 x 5000 A3/HAD Solid construction, waterproof board, galvanized elements. Machine in very good condition. Technical data: Format: 525x320x525 (width/depth/height) Number of stations: 4 Power supply 230V Power consumption max 4kW Weight 142kg High pressing  ...

Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data Manufacturer / model: Krones PRESSANT UNIVERSAL 1N Machine type: container sweep-off depalletizer Year of manufacture: 2023 Application: depalletizing of glass bottles, several formats Container throughput: 14,000 containers/h (machine setting) Pallet format: flat pallets 1,200 x 1,000 mm Container conveyor height: 1,300 mm Sweep-off station: raised design for container heights above 320 mm, SEW servo drive Discharge t ...

Rotary indexing table, rotary indexing table with 16 stationsRotary transfer machine + hydraulic press TOXRundtaktautomat Special machine with several assembly stationsProduction and assembly system in rotary transfer processFrom special machine manufacturer AKE-technologies GmbHSerien number: 01-45-064Order number: 11111Year of construction: 2012- large rotary indexing table WHITE type TC500, with 16 stations- pressing station with TOX powerhouse- vibation conveyor- conveyor belts- test stations - some stations still open

Almost unused used CNC rotary axis from ISEL Automation ! By exception, a competitor's product. From a payment of a complete CNC fraes machine from ISEL due to the switch to a T-Rex CNC Fraes machine from CNC-STEP Top exact product, solid, stable processing. A few years old but top in shot. 100mm Holder for chuck 23mm Throughlet Height 320mm Width: 21 0mm Stabile cast aluminum discharge 4 Screw fasteners on the foot step motor 6.0 Ampere ! Controltable up to 48 volts Please also note our other CNC machines offers;

Rotary union / rotary union for media and signal transmission. Manufacturer: GAT – Gesellschaft für Antriebstechnik mbH (Germany) Type: ESR 70/16/11-L-G1/4 Item No.: 105556024400V00017 Serial number: 332785 Connections: G 1/4 Design: With connection flange, pre-assembled cables and connectors (see pictures) Condition: used, from disassembly, optically good, untested Technical data: Nmax: 200 1/min Pmax: 10 bar Auction-ID: A7-49816-50

NC rotary indexing table / rotary table Taktomat TT315 with SEW gear motor Manufacturer: Taktomat GmbH Type: TT315 Code: 08-300-RH-0-6 Serial number: R1T12-100654 Year of construction: 2020 Condition: Used, from production dismantling Mechanically completely visible signs of wear Untested, no electrical or mechanical function test carried out Scope of delivery: Rotary indexing table complete SEW gear motor mounted Connection cable such as Technical data: Drive: Manufacturer: SEW-EURODRIVE Gear motor: DRN90L4 / R gearbox (according to nameplate) Mains: 3~ 400 V / 50 Hz Power: approx. 1.5 kW Protection class motor: IP55 Design / dimensions (approx.): Base plate: approx. 620 × 660 mm Turntable Ø: approx. 360 mm Centering bore and multi-hole pattern available Mechanical indexing (rotary indexing table version) Auction-ID: A7-49816-49

WEISS rotary switching unit / rotary indexing table with control from an automated assembly system. Condition: used Technical data: Manufacturer: WEISS GmbH Type: TC0320T Serial number: TC514801 Station: 04 Year of construction: 2019 Weight: 112 kg Drive / control: Siemens SIMOTION D Siemens SINAMICS PM240-2 Dimensions approx.: 45 × 82 × 40 cm Auction-ID: A7-49816-61

WEISS rotary switching unit / rotary indexing table with control from an automated assembly system. Condition: used Technical data: Manufacturer: WEISS GmbH Type: TC0320T Serial number: TC514801 Station: 04 Year of construction: 2019 Weight: 112 kg Drive / control: Siemens SIMOTION D Siemens SINAMICS PM240-2 Dimensions approx.: 45 × 82 × 40 cm Auction-ID: A7-49816-60

Rotary vane compressor Manufacturer: Becker Type: VT4.25 Voltage: 400V/50Hz Performance: 12 months Status: Generalueberholt and repainted Printing capacity: 25m3/h End printing: max+ +1 bar (rel) Zubehoer: Ready to use

Rated power up to 600 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50 Hz (three-phase) Electrical fuse 16 A Laenge 2080 mm width 1030 mm He 1450 mm Juice pan in 1.4301 / AISI 304 Pressing force 24 to Press pressure 380 bar Juice yield up to 75% connection for juice drain 30mm High juice drain 400 mm Supplied scope of delivery 80x80cm, 20 pressing inserts made of acacia wood 50x50xcm ; New machine - best condition

Packing press 180P2 Inox with hydraulic lifting and vertical device Nominal power up to 1200 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2250 mm Width 840 mm He 1880 mm Maximum acceptance 1380 mm Weight 1020 kg Material 1.4301 / AISI 304 Press force 50 to Press pressure 270 - 320 bar Juice yield up to 75% Connection for juice drain 1 1/4 High juice drain 420 mm Scope 22 Pressing tummy 100x100cm + 24 press inserts Stainless steel 65x65cm ; New machine - best condition

USED KORSCH MODELO PH 230 ROTARY PRESS REF.: E6431

Number Of Stations: 32 // Output (caps/min): 500

Output (caps/min): 1500

Number Of Stations: 24 // Output (caps/min): 600

The T 4.40 DSK is an oil-free combined pressure/vacuum pump for blowing and suction air. It is a robust and durable pump that is designed for continuous operation. This dry-running positive displacement pump works with self-lubricating gate valves made of a graphite composite and requires minimal maintenance. Volume flow 50 Hz 35 m³/h Pressure/vacuum relative 50 Hz ±0.6 bar Power 50 Hz 1.85 kW Sound level 50 Hz 68 dB(A) Volume flow 60 Hz 43 m³/h Pressure/vacuum relative 60 Hz ±0.6 bar Power 60 Hz 2.2 kW Sound level 60 Hz 68 dB(A) Weight 46... 49.5 kg with motor

Equipped with three rotatable gluing surfaces of 1330 x 3000 mm. Rotation of the gluing surfaces by means of a 380 volt deceleration motor, 0.37 Kw and push button with automatic position stop. The three adhesive surfaces can be positioned at any rotation position. 9 pressure cylinders round 100 mm with 9 flat pressure rulers of 1310 mm. Can be operated per cylinder, pressure force from 0 to 8 bar. Adjustable per 3 cylinders, 18 workpiece clamping cylinders 90 mm, pressure force adjustable, the 18 clamping cylinders and clamping bars are adjustable over the width of the gluing surfaces, the butt lugs on the clamping beams are adjustable over the height every 6 cm. Auction-ID: A1-48994-6

Type: 62416, rotary wheel valve with pre-valve flat slider, drive via spur gear motor with 3 kW / 42 rpm. Little ran.

Type: 9.3-456, Y.O.M.: 1991, inlet: 400 mm x 400 mm, overhauled, without motor.

Stainless steel pumps, Hilge, Fristam, various versions and sizes

Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new

1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.

Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

Material: steel Engine: 7,5 kW Weight: 8500 kg Length x Width x Height: 7500 mm x 2000 mm x 3000 mm With working platform Turning pipe: 44 U/min Length 5950 mm, diameter 1700 mm; two draft. Very good condition, overhauled. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

Kat. No. 12-1170 in a very good condition Measurements and weight: LxBxH: 140 x 64 x 117 cm weight: 160 kg type: SRZ4 / 055LD Serial No. 279503 4,4 kW DN 65 130 l/min., 7800 l/h 7,5 bar For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1120 in very good condition Type 125VT-DS Model: HTIRM Size: NW 65 Serial-No. 1251149 Original Price: Euro 30.000,- Measurements and Weight: LxWxH: 166 x 52 x 102 cm Weight: 330 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1175 in very good condition Measurements and Weight: LxWxH: 125 x 66 x 92 cm Weight: 195 kg Model: HTIRM Type: 40VT-DS NW 50 Pressure: 10 bar Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1165 in very good condition Measurements and Weight: LxWxH: 136 x 44 x 113 cm Weight: 125 kg 3 kW 60 l/min., 3600 l/h 2 bar DN 65 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Hydraulic Type Manufactured by Angelo Cremona Maximum Diameter 800 mm Minimum Diameter 120 mm

Cat. No. 12-1125 in a very good condition Model: HTIRM Serial-No. 401543 Type: 40VT-DS NW 50 Pressure: 10 bar Measurements and Weight: LxWxH: 140 x 45 x 103 cm Weight: 140 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

; very good

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

; see pictures