126,725 used machines on RESALE, but how to find them? Machine Search
Pneumatic clip breaker for aluminum glazing beads and glass clips Working pressure 0.8mpa Air consumption 1.6l/hub
Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused
with feed device Nominal force: 1000 kN Pneumatic pressure: 5 bar Permissible delay time: 210 ms Safety distance Tool operation: 336 mm Continuous stroke (interchangeable pulley): 50/80 rpm Single stroke: 45 rpm Working capacity in continuous stroke: 3500/5000 Nm Torque: 25,000 Nm Drive power: 11.5 kW with control panel and digital display CPS 20 with support frame
Safety distance: 100 mm Run-time travel: 60 msec Table dimensions: approx. 210 x 160 mm incl. installed punching tool
Machine number: 2-0537 Compressive force: 28 kN Stroke: 60 Table dimensions: 200 x 160 mm Plunger: 60 x 35 mm
Includes: transport box 1230x810x1030mm, various accessories.
PJ Hare AM300 Pie Press Serial: 9B91140 2009, Twin pie press, 100mm diameter presses, on tabletop mobile frame, 1Ph
Key data: 75 t
Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm
Equipped with new control and laser protection from PILZ; including 1 set of tools with 2 V die sizes
Machine number: 23620678 max. compressive force: 250 kN Largest stroke: 150 mm Drive power: 7.5 kW Operating voltage: 380 V Table dimensions: 570 x 380 mm
Baier GEBA 1/F embossing press, Embossing plate: 70 x 90 mm, Embossed pressure: 600 kg, Work table: 620 x 620 mm, Embossing plate: 70 x 90 mm, Embossed print: 600 kg, worktable: 620 x 620 mm
Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg
Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...
Press brake manufactured in 2005. This Baykal APH 3110x200 features a bending length of 3100 mm and a capacity of 200 tons. It is equipped with a main motor of 15 kW and has a maximum stroke of 250 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APH 3110x200 machine we have for sale. Contact us for further details.
High Pressure unit Hammelmann HDP 504 Year of construction 2021 Operating pressure 2200 bar Flow rate 122 ltr Power 490 kW Operating hours 880 h engine CAT C 18, Level 5 TIER 4F Power 565 kW in Truck, Used Truck Scania 164 L V8, 480 YoM 2004 Power 353 kW 802,500 km
Grafoteam PST 48 Printing Plate Transport Trolley; Condition New; for panel format 811x1200mm; mobile. Plate trolley Grafoteam PST 48; condition new; for plate size 811x1200mm; mobile.
This 3-axis EHT EHPS 32-40 was manufactured in 1988. It features a pressing force of 3200 kN and a working length of 4050 mm, making it suitable for various bending applications. The machine is equipped with a Cybelec DNC control unit and safety features including vertical light curtains. If you are looking to get high-quality bending capabilities, consider the EHT EHPS 32-40 press brake we have for sale. Contact us for further details.
A second-hand line for milling and pressing fruit and vegetable pulp. The line consists of: - BELT PRESS TYPE B FRU 800 HK WITH CONTROL PROBE IN FEED HOPPER FLOTTWEG 2008 - FEED HOPPER MEGA 2012 - ROTARY SIEVE WITH EXTERNAL INFLUX DIA. DRUM 355MM LENGTH DRUM LENGTH 1600 MMDRUM 1600 MM MEGA (FLOTTWEG) 2012/14 - METERING RUNG ELEVATOR - BRUSH POLISHER MEGA 2008 - INSPECTION ROLLER CONVEYOR MEGA 2008 - FLOTTWEG SCREW CONVEYOR 2017 - PULP CONTAINER 400L - CENTRIFUGAL PUMP FOR PULP - 500L FLUSHING WATER TANK - CENTRIFUGAL PRESSURE PUMP - PIPES, FITTINGS, ELECTRICAL CONTROL CABINET FLOTTWEG 2008 - JUICE COOLING SYSTEM STM 2018 - TUBE BEAKER SPOMASZ 2018
Yizumi Injection Press Model: YL2-V280L Clamping force 2800 kN Volume: 2000cc Mold open stroke 500mm Min. mold height 100mm Heated platen size 670mm x 780mm Heating plate daylight 600mm Injection pressure 1970 bar Theoretical Injection volume 2000cm3 Oil pump power 11kW System pressure 230 bar Total power 37kW Power supply: 415V, 50Hz, 3P+N+PE Rexroth variable pump + Inovance servo motor: Year 2021 CE marked
This WEMHÃNER Variopress Basic 1000S was manufactured in 2018. Ideal for efficient laminating processes, this machine ensures consistent performance. Consider the opportunity to buy this WEMHÃNER Variopress Basic 1000S laminating press. Contact us for more information.
Laminating press manufactured in 2001. This WEMHÃNER KT-F-1E features a pressing area of 5,750 mm x 2,200 mm, with pressing plates measuring 2,600 mm and 2,620 mm in length. The machine accommodates thicknesses from 6 mm to 40 mm and operates at a pressure of approximately 40 kg/cm². If you are looking to get high-quality laminating capabilities, consider the WEMHÃNER KT-F-1E machine we have for sale. Contact us for further details.
Specifications Maximum pressure: 60 tons Power supply: 400 V/ 7.5 kW Press force: 6.25 kg/cm² Year of construction: 2010 Bale size: 1200x800x1100 mm Price: on request Bale weight: approx. 340-500 kg Machine is fully functional, after technical supervision. If you have any questions, please call us at +48 696 072 985
used press brake Trumpf TrumaBend V320 Year of construction 198 Bending length: 4100 mm Working stroke height: 365 mm Back gauge: 6 axes Bending aid: 2 pcs.
Laminating press manufactured in 2010. This LIGMATECH MPH 510/25/09 features an integrated assembly line setup with a total length of approximately 26 meters, including an entry section. It includes a cross-transport belt drive, working height adjustment, pre-selection of pressing time, and light curtain safety with 4-way muting. If you are looking to get high-quality laminating capabilities, consider the LIGMATECH MPH 510/25/09 machine we have for sale. Contact us for further details.
Key data: 22 t, 900 mm, 850 mm
Electric Press Brake Cone C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton
Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7
Key data: 22 t, 900 mm, 850 mm
Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5
Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton
Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton
Key data: 44 t, 1600 mm, 1550 mm
Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Light barrier: Lazersafe IRIS Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake tool holder: Hydraulic WILA tool clamping up / down 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg
Lets BV high pressure unit with buffer tank, dimensions high pressure unit: 2150 mm x 800 mm x 2190 mm, dimensions buffer tank: 1400 mm x 800 mm x 500 mm.
Technical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg
Furniture Door Frame Press V. Grum-Schwensen Type MTP Specifications: • Assembly of frame parts: fully automatic • External frame dimensions min. (mm): 120 x 120 • External frame dimensions max. (mm): 700 x 2500 • Custom size
used
Capacity 3 ton/hour Motor power 200Kw Die diameter 1000 mm Number of rollers 5
FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...
Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]) Speed range: 80-400 [spm]. Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available ...
Key data: 150 t, 2550 mm
Stock number: 3866 CNC PRESS BRAKE Manufacturer: BEYELER, Type: PR 8 150D x 3100 mm Machine NO.: 96/445/002, Year of manufacture: 1996 Specifications: Gr. bending length 3100 mm Gr. pressure capacity 150 tons Stroke length 215 mm Column passage 2550 mm Projection 305 mm Total power 7.5 kW CNC control Cybelec DNC 908 PS Presscad Fabr. Controlled in 4 axis Y1-Y2-x1-x2 axes Length: 1900 mm, Height: 2600 mm, Width: 3500 mm, Weight: 9500 kg
Hydraulic press 1500 tons. Clearance between the two side pistons = 1400 mm. Clearance between uprights = 400 mm. Vertical clearance between open boards 3200 mm. Moving table dimensions = 1700 x 1800 mm. Fixed table size = 1500 x 2000 mm. This press has been used to produce forks for forklift.
Waste press Strautmann RC 1100TT after renovation Specifications Maximum pressure: 4 tons Use for: 1100 L Power supply: 230V/1.5 kW Year of construction: 1996 Price: on request If you have any questions, please call us: +48 696 072 985
maximum number of results exceeded
please refine your search
250 € 
