rotary press used for sale

Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Groove: W/D 9 x 12, 5 x 8, 17 x 20 mm -Length: 3 x 835 mm, 1 x 272 mm -Width/height: 60 mm -Drawing: with the pictures -Weight: 67.5 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Honeywell type: C6097A2110D -Control range: 1.0-10 mbar -P max.: 200 mbar -Pressure switch: 5 A-250 V -Protection class: IP54 -Price: per piece -Number: 25 pieces -Dimensions: 110/95/H95 mm -Weight: 0.3 kg/piece

Fortuna dough dividing and working machine Type: A3 Completely overhauled repainted Division of 30 Weight range dough pieces 32-80 grams Dough insert per saucer 960-2400 grams with incubation electric head The robust design and duration oil lubricating of the transmission parts ensures a long service life Easy cleaning of the knife head 380V / 50Hz Weight of the machine approx. 640 kg Machine stands on a specially made wheelchair Dimensions: Height: 150 cm Width: 60 cm Depth: 70 cm The machine was completely dismantled and completely overhauled from the ground up. Then completely repainted.

pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 118 x 315 mm -Weight: 11.2 kg

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; heat deflector; Stand-standing device. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Bending Lenght 3050 mm Bending force 135 ton Crowning Type Motorised Controller ModEva 19T CNC back gauge X - R Z manuel

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Recording: 25 mm -Drawing: in the photos -Dimension: 40 x 130 mm -Length: 495 mm -Weight: 12.5 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool: 26° -Drawing: in the photos -Dimension: 13 x 180 mm -Length: 45 mm -Weight: 0.7 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: 90° 12 mm -Drawing: in the photos -Length: 4200 mm (2 x 2100 mm) -Dimension: 20 x 75 mm -Weight: 44 kg

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,800x900x1,450 mm Weight: approx. 1,230 kg Year of construction: 2015 Condition: in very good used condition.

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG500U-6T -Control range: 100-500 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Honeywell, Gas pressure switch -Type: C6097A2200 -Control range: 2.5 - 50 mbar -Pmax: 300 mbar -Dimensions: 85/65/60 mm -Weight 0.2 kg

The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Maximum pressure: 9 tons Pressing force: 1.94 kg/cm² Bale size: 770x600x500 mm Bale weight: - Power supply: 400 V/4 kW Year of construction: 1997 Productivity: - Price: on request

Compressive force: 170 t Spindle Ø: 160 mm Table support surface: 700 x 900 mm Plunger area: 500 x 800 mm Gr. Distance between table and plunger: 450 mm Drive motor: 380 V, 11 kW Weight: 8200 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 120 mm -Price: per piece -Number: 2 pieces -Weight: 13 kg

Maximum pressure: 14 tons Pressing force: 2.92 kg/cm² Bale size: 800x600(600-1000) mm Bale weight: approx. 100 - 200 kg Power supply: 380V/7.5kW Year of construction: 1993 Productivity: approx. 3 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine -Pneumatic cylinder: Festo type DC-100-050-PPV -Stroke: 50 mm -Holder: Ø approx. 9 mm -Dimensions: 350/200/H515 mm -Weight: 31 kg

Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine, die tool, hemming tool -Tool: for press brake, die / hemming tool -Measures: see drawing in the photos -Dimensions: 150/101 / H75 mm / 150/77 / H159 mm -Weight: 7.2 kg / 11.4 kg

Maximum pressure: 54 tons Pressing force: 5.62 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 4 kW Year of construction: 1999, 2000 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine, die tool, hemming tool -Tool: for press brake, die / hemming tool -Measures: see drawing in the photos -Dimensions: 150/101 / H77 mm / 150/77 / H160 mm -Weight: 6.9 kg / 11.2 kg

Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool: for press brake, 12 pieces -Prisms: 25 ° x 10 mm -Drawing: in the photos -Lengths: see parts list in the photos -Dimensions total: 30/79/2917 mm -Weight: 47 kg

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, 6 pieces -Tool: for closing folds -Drawing: in the photos -Dimension: 20 x 70 x 495 mm -Price / fee: complete -Length total: 2970 mm -Total weight: 31.3 kg

Maximum pressure: 16 tons Pressing force: 2.08 kg/cm² Bale size: 1100x700x950 mm Bale weight: approx. 150-250 kg Power supply: 400V / 4kW Year of construction: 1993 Productivity: approx. 3 bales/hour Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

used press container Manufacturer: AVERMANN Type: MPC 10 Year of construction:? specifications: Pressing force: 38 t Drive power: 5.5 kW ? Capacity: 10 m³ Machine weight: 3,000 kg

Maximum pressure: 5 tons Pressing force: 2.17 kg/cm² Bale size: 590 x 390 x 485 mm Bale weight: approx. 25 - 35 kg Power supply: 400V / 2.2 kW Year of construction: 2003 Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

RECON Part number: 524 070 11 01 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Year: 2021 (brand new machine, immediately available) - stable cast iron construction - hydro-pneumatic controls - adjustable position of the heads - lowered thrust unit (30 mm hoof) - profile supports - scissors stroke: 10.5 mm - working stroke of the clamp: 80 mm - crimping height: 120 mm - crimping point: 30-60 mm

M. No: 32781 Size: 300 x 560 mm Speed: 44.000 c/h

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 14 pieces -Tool angle: 25° -Drawing: in the photos -Dimension: 25 x 158 mm -Length total: 2615 mm (lengths see parts list photo) -Weight: 47.3 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 99 mm -Price: per piece -Number: 2 pieces -Weight: 9.7 kg

used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2013 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200

automatic baler Manufacturer: PAAL Type: PACOMAT IS Year of construction: 1988 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Channel size: 700 x 700 mm Opening: 800 x 650 mm Drive power: 22 kW Throughput: 100 m³/h with additional manual hopper Wire flow in the pressing direction seen on the left side

USED PRESSURE TRANSMITTER VEGABAR 87

Converter, control, pneumatics -Festo product number: 12592 -Number: 22 pieces available -Price: per piece -Weight: 30 g

Pressure medium converter, pressure intensifier, pneumatic-hydraulic intensifier -Max. Hydraulic pressure: 120 bar -Dimensions: 208/170/H350 mm -Weight: 7.4 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 20 x 70 mm -Length: 3020 mm -Weight: 22 kg

Oil filter system, oil cleaning system, oil transfer system, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic test pump -Operating pressure: max. 420 bar -Dimensions: 140/68/H245 mm -Weight: 2.3 kg

Cardboard press, paper press Horizontal version bale size 60x70x70 cm with cutting device Make HSM 14 to Presskraft older model year unknown. Very comfortable due to Insertion shaft and cutting device. The finished bale can be placed directly on a Pallet can be pushed out. Has a large hydraulic agregat runs very fast and quiet. Sale without guarantee/liability or warranty for VB 3.600,--€ plus VAT VAT. Peter Knam Sweden 7 D-88085 Langenargen peterknam.de 07543/4242

Dear Sir or Madam, We have in the offer for you The Tiger metal and scrap press.These are available with different press box dimensions and Bale dimensions (25 x 25, 30 x 30, 40 x 40). Cutting edges on all three sides of the box give the machine the ability to handle oversized materials. The machine is equipped with side pre-loading box, oil cooler and radio remote control. (further equipment possible) Out of stock. If you have any questions, please do not hesitate to contact us. To make an offer, we need your company data and a direct e-mail address.

Pressure transmitter for measuring gases, vapors and liquids ROSEMOUNT 2088

USED PRESSURE TRANSMITTER WITH SPACER RING VEGABAR 81

Inv. Num. : 3861 Type: L-K 120-3100 TSI Producer: SAFAN Created: 2002 Parameters: Control system: SAFAN Pressing force: 1200 KN Bending length : 3100 mm stroke: 180 mm Dimensions: 4200 x 1650 x 2775 mm Machine weight: 8700 kg

Pressure reducers, pressure regulators, bladder accumulators, high pressure bladder accumulators, hydraulic accumulators -Pressure accumulator: with shut-off valve -Type: SA1 OM25 T100 -Dimensions: 740/113/H200 mm -Weight: 15 kg

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.29 kW -Speed: 1800 rpm -Volume output: unknown -Connection air duct: 164 x 95 mm -Dimensions: 465/325/H230 mm -Weight: 11 kg

automatic baler Manufacturer: PAAL Type PACOMAT II S SO Year of construction: 1994 specifications: Pressing force: 50 t Specific pressing force: 7.14 kg/cm² Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm Drive power: 45 kW Throughput: approx. 170 m³/h automatic 4-fold horizontal binding

Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener

- 2 ZK yeast tanks, Fabr. BAM, each with a capacity of 59.98 hl, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 feet, with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel cone tip, with agitator in the cone, with Spray head, top with ladder bracket, YOC 1985. - 2 ZK yeast tanks, Fabr. Steinecker, with a capacity of 62 hl each, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 Feet (1 foot on load cell), with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel Cone tip, with agitator in the cone, with spray head, pulled down cleaning line, top with conductor bracket, YOC. 1981.

- 2 pressure tanks with 61.1 hl, Fabr. Noble, 2 bar, in stainless steel, single-walled, standing, with manhole in the lower frame, Spray head with downed cleaning line, fittings, with papers, Ø: 1,500 mm, H: 4,200 mm. - 4 pressure tanks with 102.2 hl, Fabr. Noble, 2 bar, in stainless steel, single-walled, standing, with manhole in the lower frame, Spray head with downed cleaning line, fittings, with papers, Ø: 1,800 mm, H: 4,900 mm.

Measuring device for air conditioning units, air conditioning systems, cooling units -Type: -with: various hoses -Foot: pressure pump -Number: 1x measuring devices with suitcases available -Price: per piece -Dimensions: 340/130/H260 mm -Weight: 5.3 kg