128,986 used machines on RESALE, but how to find them? Machine Search
pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1500 kN chamfer lenght: 3550 mm distance between columns: 3044 mm Control: Cybelec 34 PS-CN column arm: 350 mm max. ram stroke: 220 mm dimensions of the machine ca.: 3200 x 4200 x 2100 m sheet support: hinten / back number of support arms: 2, verschiebbar / adjust. die shift: hydraulical tool clamping: upper tool quick change system: crown: 3 sets of tools included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
280T Servo Double Column Heating Press with Heating Plates We can offer you this press at a particularly low price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This makes it possible to purchase a high-quality servo-hydraulic double-column press with heating plates at attractive conditions and at comparatively short notice. The photos shown show similar, already built machines from the factory and serve as example pictures. Technical data + information: General information Press force: 280 t Type: Servo Double Column Heating Press Cylinder: 1 cylinder Guided tour: 4 column guides Clear width between the uprights: 1,250 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from the floor incl. damper plates and heating plate: 900 mm Total height approx.: 3, ...
pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...
Buhler DMWP flake mill, 1000x600, complete with electric motor
Whisper compressor Planet Air double piston; as good as new condition; double pistons; 8 bar; Boiler 50 liters. Whisper compressor Planet Air double poppet; condition as new; double poppet; 8 bar; tank 50 liters.
1100T Servo Double Column Heating Press with Heating Plates We can offer you this press at a particularly low price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This makes it possible to purchase a high-quality servo-hydraulic double-column press with heating plates at attractive conditions and at comparatively short notice. The photos shown show similar, already built machines from the factory and serve as example pictures. Technical data + information: General information Press force: 1,100 t Type: Servo Double Column Heating Press Cylinder: 1 cylinder Guide: 4 column guides (Ø 150 mm) Clear width between the uprights: 1,600 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from the floor incl. damper plates and heating plate: 1,000 mm Total height ...
- Pressing force: 1500 kN - Pressure: 300 Mpa - Piston stroke: 300 mm - Downward speed: 9.8 mm/s - Working speed: 2.6 mm/s - Return speed: 13 mm/s - Passage: 1550 mm - Table dimensions: 1530 x 500 mm - Table height adjustment: 750 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 2x 150 mm - Guide piston Ø: 70 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2150 x 2050 x 1000 mm + 750 x 1100 x 750 mm - Weight: 1800 kg
- Pressing force: 1000 kN pressure: 289 bar - Piston stroke: 300 mm - Downward speed: 10.5 mm/s - Working speed: 2.7 mm/s - Return speed: 15 mm/s - Passage: 1050 mm - Table dimensions: 1030 x 460 mm - Table height adjustment: 600 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 110 mm - Guide piston Ø: 60 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2000 x 2150 x 900 mm - Weight: 1250 kg
Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Speck P52/30-500 30l/min. at 500bar (year of construction 12/16) - Motor: Electric 30kW - 400l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs - Dimensions with 400l water tank: approx. 1,250 x 1,510 x 1,260 - Empty weight: approx. 700 kg - Year of construction: 2009, new high-pressure pump12/2016 - Operating hours: approx. 1500 h
For sale is a tested pressure vessel with a capacity of 900 liters. The container from the well-known manufacturer OKS is built in 2023 and has not yet been used. Due to the existing TÜV test, the container complies with the applicable regulations and is ideal for use in industry, trade or even in the hobby sector. Technical data: - Manufacturer: OKS Otto Klein GmbH - Year of construction: 2023 - Volume: 900 liters - Max. operating pressure: 11 bar - Test pressure: 16.5 bar - Temperature range: -10 °C to +80 °C - Medium: Air / Nitrogen - Corrosion surcharge: 0.5 mm - TÜV test available (04/2023) - Complies with Directive 2014/29/EU If you have any questions, please feel free to contact us at any time
Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year of construction 01/08) - Motor: Electric 30kW - 1250l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs and crane eyelets - Dimensions with 1250l water tank: approx. 1,100 x 1,760 x 1,770 - Empty weight: approx. 1,500 kg - Year of construction: 2013 - Operating hours: approx. 1500 h
Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch -Manufacturer: Dürr -Part No.: 4Q 01 21 300 -Article No.: DE45E50040PKD232 -Basic measuring range: 0...10 kPa -Dimensions: 105/90/H70 mm -Weight: 0.3 kg
Polystyrene compressor Styropactor MAXI | Shredder press for Polystyrene EPS Compressor, combination of shredder and press for polystyrene EPS MAXI Commodity number: 42055 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 70-90 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 100-120 Connection: 7.5kW, 3-phase 400V/50Hz 480V/60Hz Insertion opening: 600×1000 mm Length: 3180 mm Height: 1600 mm Width: 870 mm MAXI PLUS Commodity number: 42060 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 110-130 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 170-200 boxes/h Connection: 11kW, 3-phase 400V/50Hz, 480V/60Hz Insertion opening: 600×1000 mm Length: 3680 mm Height: 1600 mm Width: 870 mm Wet boxes: YES Stainless stee ...
Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve -Manufacturer: Superior, pressure relief valve, unused original packaging -Type: 3220-360/360 PSI -Dimension box: 105/50/H50 mm -Weight: 0.3 kg
Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.
Print roller, printer roller, spindle, anvil roller, pressure roller -Print roller: unfortunately no type designation -Technical dimensions: see photos -Dimensions: 295/100/H100 mm -Weight: 5.7 kg
Baler V8 | 8t pressing force. Press for cardboard, foil, paper. V8 MEDIUM-SIZED BALER Our V8 baler is versatile and offers medium-sized companies that need to process a range of materials, including bulky objects and packages of different sizes, with excellent value for money. The V8 produces bales that fit perfectly on a Euro pallet and is suitable for pressing cardboard, plastic, textiles, paper, polystyrene and food waste Recommended for supermarkets, gas stations, department stores, hotels, factories and logistics centers. Bale size: 800 mm H × 950 mm W × 600 mm D Bale weight: 100–180 kg Pressing time: 33 seconds Pressing force: up to 8 tons Dimensions: 2270 mm H × 1100 mm W × 745 mm D Filling opening: 950 mm W × 485 Integrated bale ejection mechanism Weight: 425 kg Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels E-Power DIN EN ...
Baler V20X | 20t press for cardboard, foil, paper, waste Baler, packaging press V20X | 006 With a pressing force of up to 25 tons, the V20X can efficiently compact cardboard, plastic, paper, textiles and food waste. Recommended for markets, department stores, hotels and all other users who have to deal with average amounts of waste and have to work at low ceiling heights. Bale size: 800 mm H (variable) × 1100 mm W × 750 mm D Bale weight: 200–300 kg Pressing time: 35 seconds Pressing force: up to 25 tons Dimensions: 1970 mm H × 1695 mm W × 865 mm D Filling opening: 1100 mm W × 625 mm H Integrated bale ejection mechanism Weight: 980 kg Power supply: Three-phase, 380/400 volt 3 kW motor Noise: 74 decibels DIN EN 16500 IP54 protection class E-Power Standards PLC light indicator "Bale full" and "Automatic pressing process"
2 cloth press 1,0 m cloth width capacity: up to max. 4 t with top fruit
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, die tool -Measures: see drawing in the photos -Dimension: 3060/20 / H79 mm -Weight.: 30.3 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 33 x 170 mm -Length: 1485 mm (1 x 855/630 mm each) -Weight: 44.6 kg
Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T
Pressure flange for STARTER MAN 40/54 recon MAN part number: 161.01.011
Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Brigon, accessories pressure measuring devices -Measuring liquid: green HDM -Measuring range: up to 30 mbar -Dimensions: 95/50/H385 mm -Weight: 0.6 kg
Pressure reducers, pressure regulators, bladder accumulators, high pressure bladder accumulators -Pressure accumulator: without type designation -Container: Ø 122 mm -Dimensions: Ø 122 x 200 mm -Weight: 2.7 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 29 x 171 mm -Length: 1570 mm (1x 650/500/420 mm each) -Weight: 41.2 kg
Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG6UG-3 -Control range: 0.4-6 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg
Pressure pipe ground MAN 40/54 recon MAN part number: 434.01.012
Baler, press for cardboard cardboard, foil paper V50 | 706 SPECIFICATIONS Bale size: 1000 mm H (variable) × 1200 mm B × 800 mm D Bale weight: 350–550 kg Pressing time: 45 seconds Pressing force: up to 50 tons Dimensions: 3055 mm H × 1985 mm W × 1130 mm D Filling opening: 1200 mm W × 640 mm H Weight: 1870 kg Power supply: Three-phase, 380/400 volt 7.5 kW motor Noise: 74 decibels DIN EN 16500 IP 54 protection class PLC light indicator "Bale full" and "Automatic pressing process" CE Certification Made in EU OPTIONS Adaptable for vehicle bodies Suitable for use at sea Automatically opening guillotine door E-Power (three-phase motor with 380/440 volts and 4 kW) PET Press Filling at the back of the machine Electronic weighing system Annual maintenance contract Galvanized Description The V50 is perfect for pressing large volumes of waste and then reselling or ...
Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG50UG-6Z MIN -Control range: 2.5-50 mbar -Pmax.: 600 mbar -Dimensions: 115/75/70 mm -Weight: 0.3 kg
Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch unused OVP -Type: DG10U-6T -Control range: 1-10 mbar -Pmax.: 600 mbar -Dimensions box: 75/75/70 mm -Weight: 0.4 kg
Bale size: 600 mm H (variable) × 600 mm W × 400 mm D Bale weight: 15–30 kg Pressing time: 35 seconds Pressing force: up to 8 tons Dimensions: 2500 mm H × 765 mm W × 575 mm D Integrated bale ejection mechanism Hinged door Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Weight: 415 kg Noise: 70 decibels DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification Made in EU OPTIONS Collecting tray for residual liquid Suitable for use at sea Electronic weighing system Annual maintenance contract Solar powered Galvanized or stainless steel V5HD PRESS FOR CANS & BOTTLES Fast, efficient and easy to use: The V5HD effortlessly presses aluminium cans and PET bottles to make them easier to dispose of. Recommended for restaurants, pubs, bars and special recyclers. Hinged door and 35-second pressing time Integrated bale ejection mechan ...
pressure difference sensor, pressure transmitter -Manufacturer: Johnson, pressure transmitter -Type: P499ACH-401C -Number: 2x sensor available -Price: per piece -Dimensions box: 105/45/H40 mm -Weight: 0.1 kg/piece
CP30 PRESS FOR CANS AND OIL FILTERS With its compact design and a pressing force of 8 tons, the CP30 efficiently presses metal cans and large oil filters up to a size of 30 liters. Recommended for car repair shops, paint shops and food manufacturers. Pressing force of 8 tons Low voltage control and emergency stop knob for safe working Easy removal of cans after pressing and drip tray for residual liquid SPECIFICATIONS Dimensions with stand: 2540 mm H × 1105 mm W × 680 mm D Dimensions without stand: 1435 mm H × 615 mm W × 680 mm D Dimensions of the pressing chamber: 475 mm H × 350 mm W × 350 mm D Weight: 245 kg Pressing time: 35 seconds Pressing force: up to 8 tons Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels IP54 protection class CE Certification Made in EU OPTIONS Savings model Suitable for use at sea Galvanized or stainl ...
New airend BOGE BA 15 as a replacement for Termomeccanoca SCA8D-R (TM SCA 8 D-R) The installation dimensions are the same. BOGE Id.Nr.: 201021166P ( incl. gasket 60 x 60 x 2 and O-Ring-76x3-N-FKM (Viton) 75)
Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Angle: 90° -Dimensions: 55 x 133 mm, see drawing in the photos -Length: 365 mm -Weight: 9.8 kg
Hydraulic frame press Hungerbühler Press-Measurement: 4100 x 3050mm 3 vertical cylinders 3 horizontal cylinders Height adjustment via control box Width adjustment via control box Supports at the bottom for gluing wings at working height. The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 10 x 88 mm -Length: 2000 mm -with: storage box -Weight: 13.2 kg
Maximum force ton-force 400 Slider stroke length mm 250 Number of courses of a slider per minute 25 Maximum distance between table and slider (in lower position of slider) mm 670 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 Main electric motor power kW 40 Press overall dimensions mm - length 3410 - width 3140 - height 5930 Press weight kg 30 600
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 108 mm -Weight: 6.5 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 60° -Drawing: in the photos -Dimension: 25 x 165 mm -Length: 3562 mm (each 1 x 1818/800/387/190/122/85/60/55/45 mm) -Weight: 124 kg
Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Honeywell, gas pressure switch unused, Ovp -Type: C6097A2310D -Control range: 30-150 mbar -P max.: 500 mbar -Number: 19x switches available -Price: per piece -Dimension box: 110/95/H95 mm -Weight 0.3 kg/piece
PKZZ 250 Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available. Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute SPM 12 Adjustment of ram 120 mm Shutheight 550 mm Table cushion force 50 to Cushion stroke 160 mm Motor 32 kW Weight ca. 39 tons
maximum number of results exceeded
please refine your search
600 € 
