rotary press used for sale

Hot and cold water high-pressure cleaner Working pressure: infinitely variable up to 500 bar Maximum requirement quantity: 14-30l /min Pump:3-Plunger,All-Ceramic Engine: Hatz,3-cylinder diesel (water-throated) Motor power:42kW Speed motor/pump: 2,350 /1,450 rpm Pump drive:V-belts Fuel consumption:approx. 5.3 l/h Volume fuel tanks:70l/105 l Volume water tank: 1000 l Pressure outlet:(water): M241.5 IG Heating capacity olburner: 291 kW (ca 95 °C) Consumption olburner: approx. 9.1 l/h Construction: self-supporting frame on frame with forklift pockets Empty weight: approx. 1,450 kg Mass: (LWH) 220+147177 Ground open (LWH) 307147246 Article no.: 1 491 030

With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work

Cold water high-pressure cleaner Working pressure: 800 to 2,800 bar Required quantity: 8 to 27l/min Pump: Slow-running high-pressure pump with 3 carbide plungers, integrated reduction gear, compression lubrication and engine clamp Engine: VOLVO PENTA 4 CYLINDER Diesel,water-throated,5.200cm3 Engine power:160 kW,220 hp Motor/pump speed: 2,065rpm / 500 rpm Pump drive: Gearbox Fuel consumption:approx. 21 l/h Volume fuel tanks200l Volume water tank: 160l Volume urea tank: 25l Consumption urea: approx. 1.05 l/h Pressure outlet:(water): 9/16'' -18UNF LH IG or DYNAJET Easy Connect EC Chassis: 2-axle attachment Empty weight: 2.690kg Mass: (LWH)467197218 Ground open (LWH)487197254 Article no.: 1 610 040

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

A roll punching press for stamping is available up to A3. The die is pulled under the roll.

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

SINO NCP 160 eccentric press built in China in 2018 by Sino Machinery & Tools (Dongguan) Co., LTD. performs machining of metal workpieces with a press force of 160 tonnes. The machine is equipped with high-quality components, including e.g. a 100 mm adjustable slider making up to 25 to 55 strokes per minute, and a YU JAIV PDH-120 indicator displaying the distance of the die between the table and the slider. The large working area, ease of operation and outstanding precision, guarantee excellent machining results. The press offers the possibility of combining it with an automatic feeding system in order to increase the number of parts produced and significantly reduce costs. The total weight of the machine is 13 tonnes. Technical data of the SINO NCP 160 press - maximum press force: 160 t - work area dimensions (L x W x H): 910 x 600 x 410 mm - bolster dimensions (L x W x H): 125 ...

Briquetting press MATEC F-Cube 20 new Dimension press LxWxH: 130x74x112 cm weight 233 kg Briquette square 30x30 mm Capacity approx. 10-25 kg briquettes / hour Size feed funnel approx. 0.33 m3 Motor hydraulic pump 2.2 kW, 3x 400 V, 50 Hz Electricity consumption approx. 1.1 kWh How we work Continuous operation Year of construction 2021 Additional options: - Extension line for briquettes with stand -Auto. Start-stop system for operation with level monitoring - Sensors for level monitoring - Hydraulic oil 30 liters - 3 m cable with Euro plug 16 A - Flange adjustment filter-hopper press The spec. Density of briquettes is about 900 kg / m3. The maximum wood moisture content is 15%. The measured noise level is 62 dB. New machine, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden  ...

Transmitting vessel with 2,000 l. gross content, inlet with pneumatic cone closure (incl. 1 spare cone), venting and outlet via pneumatic squeezing valves. Conveyor lines on the side of the building.

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Dear customers, currently we offer a polystyrene press incl. shredder for sale. It is a new machine that has 0 operating hours! Here are a few more technical details: Material to be processed: EPS moulded parts and chips Maximum material density that can be processed: 18 kg/m³ Loading opening: 700 x 360 mm Filling height 1,402 mm Achievable compaction: up to 250 Kg/m³ System throughput: up to 15 kg/h Block dimensions: 130 x 130 mm Power supply: 3x400 VAC+N+PE 50 Hz Connected load: 1.5 KW, 400V 50Hz incl. automatic press pressure regulation with pellet holder Finish: RAL 7035 (light grey) combined with RAL 2011 (deep orange) Incl. water dosing system for direct screw cooling up to 10 litres/h with water shut-off valve. Price plus VAT, which will be shown separately on the invoice. Transport possible worldwide for an extra charge! If you have any questions, please d ...

Styrofoam briquetting press With an innovative technology, the press compacts bulky foam waste from EPS (polystyrene®) into easy-to-handle blocks in an extremely economical way. The extreme volume reduction achieved in this way in a ratio of up to 40:1 not only saves transport and disposal costs to a considerable extent, the blocks produced can also be recycled as raw materials and contribute to a quick amortization. - Long service life due to robustly designed drive technology - Efficient process due to fully automatic pressing pressure control, with predetermined breaking point function and individual block length - Hours of operation without overheating and fusion due to optional water-cooled pressure channel - Convenient, fully automatic operation due to state-of-the-art control - High cost-effectiveness due to low operating and maintenance costs - Simplest commission ...

Styrofoam briquetting press With an innovative technology, the press compacts bulky foam waste from EPS (polystyrene®) into easy-to-handle blocks in an extremely economical way. The extreme volume reduction achieved in this way in a ratio of up to 40:1 not only saves transport and disposal costs to a considerable extent, the blocks produced can also be recycled as raw materials and contribute to a quick amortization. - Long service life due to robustly designed drive technology - Efficient process due to fully automatic pressing pressure control, with predetermined breaking point function and individual block length - Hours of operation without overheating and fusion due to optional water-cooled pressure channel - Convenient, fully automatic operation due to state-of-the-art control - High cost-effectiveness due to low operating and maintenance costs - Simplest commission ...

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

CNC – controlled frame gluing press for automatic gluing of all frame constructions with dowel connection – tine connection – 45° miter connection, automatic centering of the press plates and the upper press beam. The frame presses are available in the following sizes – pressing area 3,000 x 1,700 mm – 3,000 x 2,000 mm and 3,500 x 2,500 mm. Two vertical press cylinders – pressing force per cylinder 7 tons (optional four vertical press cylinders). Two horizontal press cylinders, stroke range 150 mm - pressing force per cylinder 3 tons. Maximum tread depth 130 mm (larger tread depths on request). CNC control from SIEMENS® with touch screen for calling up three automatic pressing cycles, 99 compression programs can be stored per pressing cycle. Among other things, the following parameters can be programmed: frame size, frame profile structure, pressing time, pr ...

Plywood Press, manufactured by Siempelkamp, working sizes 2500 x 1300, 10 floors

Gluing stand VHS with motor hydraulics for gluing all frame constructions with dowel connection – tine connection – 45° miter connection. The motor-hydraulic gluing stands VHS are available in the following sizes: Maximum grouting range 2,500 x 1,800 mm 2,500 x 2,100 mm 3,000 x 1,800 mm 3,000 x 2,100 mm 3,500 x 2,100 mm Three vertical press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each. Two horizontal press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each (optionally, the gluing stands can of course be supplied with more press cylinders). Drive power 0.75 to 1.25 kW.

; neu, sofort lieferbar

System: Mobile dewatering system on trailer Type: Chamber filter press 500 x 500 Execution: filter press Year of constr.: 2017 refurbished Number of plates: 5 + head and end plate Filter plates: PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 130 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Pump technology: In consultation System: The system is delivered as turnkey dewatering equipment ready to plug. Visit: the systems in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.

Mobile press system with belt or packing press - can be varied by hourly performance More detailed information on request!; New machine - best condition

HACO ERM 30175 CNC press brake built in Belgium in 1999, performs precise bending of workpieces with a maximum length of 3100 mm. The robust, stable construction of the machine, together with a high press force of up to 175 tonnes, guarantee excellent machining results. The press is equipped with operator conveniences such as a pedal for foot control and a HACO bc40 GRAPHIC CNC control located on the arm. The total weight of the machine is 10 tonnes. Technical data of the HACO ERM 30175 press - CNC controller: HACO bc40 GRAPHIC - maximum press force: 175 t - maximum workpiece length: 3100 mm - bending speed: 8 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - distance between carcase walls: 2600 mm - reach: 300 mm - working stroke: 200 mm - safety distance: 300 mm - pedal for foot control - main motor power: 15 kW - waiting time: 75 ms - maximum pressure: 255 bar ...

With the universal hole punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work.

Roll press / dough dividing and warp knitting machine / Klievmaschine Machine Mechanics completely overhauled & repainted by the expert New installation of the entire electrical system, according to the latest standards 6 months warranty Properties: + Stationary machine, very robust & stable construction + Machine is set in motion by switch-on lever, one-hand operation + Cleaning position electric, to the rear, with switch + even division of the dough, excellent rounding of the dough pieces + equipped with active cut-off, for square dough pieces + Partial knife / cutter head has been overhauled / recoated + completely disassembled, mechanically overhauled, repainted + New installation of the entire electrical system, according to the latest standards + Transmission parts run constantly in an oil bath + complete overhaul in Babenhausen, according to German quality stand ...

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109138 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

Cylinder go Hess frame press with pneumatic 3 vertical and 2 horizontal cylinder

• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...

Baling press cardboard foil MF100 | 6 t pressing force The MF100 balers are ideal for pressing cardboard, paper, film, clothing and other materials. Volume reduction through compaction of up to 90%. The press is user-friendly with a large filling volume. The automatic bale ejector helps to remove the bales from the baler without any problems. Characteristics: Bale weight of up to 100kg Ideal for use with medium material volumes Fully automatic bale ejection Powerful cylinder for uniform material compaction Hold-down device to reduce material springback CE certified Made in Europe Specifications: Pressing force: 6 t Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 phase) Machine dimensions (H x W x D): 2371 x 1388 x 1046 mm Transport height: 1876 mm Machine weight: 632 kg Cycle time: 28 seconds Noise level: 65 decibels Bale: Ba ...

Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 25 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic. Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...

Extruder with vacuum vertical prepress LVP-35, gearbox overhauled in 2011, screw wings equipped with carbide. Press equipped with DC motor 60 kW (can be converted to 55 kW three-phase motor at an additional cost). Machine is functionally tested and comes with some spare parts.

Barrel press RMH 200 Electric motor: 5.5 KW, 400 V, 50 Hz Pressure: 25 T Press cycle: 58 seconds W x D x H: 1200 x 1000 x 2800 mm

Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 40 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic, Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...

Total height 1500 mm Total length 3000 mm 5 pneumatic cylinders Compressed air pressure 8 bar Travel of pneumatic cylinders 100 mm Diameter of pneumatic cylinders 100 mm

(side-front moving table) Nominal force: 1000 ton Slide stroke: 400 mm Continuous slide strokes per 1 min: 20 Single slide strokes per 1 min: 16 Shut height: 1060 mm Slide adjustment: 320 mm Table dimensions: 3150x1800 mm Slide dim., front-back: 1700 mm Window H 1500 x W 1900 mm Hydro pneumatic cushion in table clamping force at P = 0.42 MPa (P = 4.2 kg / cm2), kN 2000 ejection force P = 0.45 MPa (P = 4.5 kg / cm2), kN 200 Main-drive electric motor power: 132 kW DIMENSIONS: 5150x4700x11400 H floor7830 mm WEIGHT:193 ton

RADAX high-pressure duct fan High-pressure duct fan with cylindrical pipe sleeve, flanges on both sides, directly driven. Cylindrical galvanized steel tube Sheet metal, with double-sided moulded Flange, hole pattern according to DIN 24155, recessed built guide wheel. Semi-axial impeller, eight spatially connected curved blades made of thermoplastic, Balancing quality G 6.3 according to VDI 2060 and DIN ISO 1940. Three-phase squirrel-cage motor by Voltage reduction speed controllable, Thermal contacts, closed design, maintenance-free, sealed, low-noise Ball bearings with long-term lubrication. Fan data (default) Seawater version. Also resistant to weak acids and alkalis. NEW!

Size max 320 x 250 mm min 160 x 120 mm Pile height 50 mm Infeed height max 850 mm min 350 mm Speed max 50-100 m/min ; working condition

SPK KB 2132 eccentric press was manufactured in the USSR in 1980. Operating with a force of 160 tonnes, the press of almost indestructible design offers the highest quality and precision during the most demanding workpiece machining. The machine’s equipment includes among others a pneumatic clutch, a large-area slider performing up to 71 strokes per minute, central lubrication and manual control. The total weight of the press is 13200 kg. Technical data of the SPK KB 2132 press - maximum press force: 160 t - work table dimensions (L x W): 1000 x 700 mm - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider dimensions (L x W): 580 x 460 mm - slider adjustment range: 120 mm - slider stroke rate: 71/min - intermediate plate thickness: 110 mm - distance between work table and slider (slider in lower position, largest stroke, connector unscrewed): 480 mm - bore ...

Rated power up to 300 kg/h engine power press 1.5 (2.0) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50 Hz (3 phases) Electrical fuse 16 A Laenge 1200 mm width 1000 mm He 1880 mm Basket and juice tray in 1.4301 / AISI 304 press force 24.2 to Press pressure 380 bar Juice yield up to 65% Connection for juice drain 30mm High juice drain 525 mm Hoehe Marc ejection 585 mm Supplied 1 press bag 100l, 3 insert huellen 48cm, 3 Press inserts made of acacia wood 48cm ; New machine - best condition

Nominal force: 6300 ton Number of continuous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper position): 1150 mm Table adjustment: 15 mm Distance between press columns: 1950 mm Ram dimensions: -front to back: 1680 mm; -left to right: 1680 mm Table dimensions: -front to back: 1950 mm; -left to right: 1920 mm Mechanical upper ejector: -max stroke: 100 mm; -number of positions: 1 -steps of stroke adjustment: 25-30-75 mm -force: 30 ton Pneumatic lower ejector: -max stroke: 300 mm -stepless stroke adjustment: 15-300 mm -number of positions: 3; -force: 65 ton Side windows dimensions: -width: 1100 mm; -height: 1280 mm Main motor: 400/590 kW/rpm Press layout dimensions: 6300x8965 mm Total height: 11125 mm Height above floor level: 9150 mm Total weight: 626100 kg

Rated power up to 150 kg/h engine power 1.1 (1.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1100 mm Width 990 mm He 1430 mm Juice pan in 1.4301 / AISI 304 press force 14 to Press pressure 380 bar Juice yield up to 75% Connection for juice drain 30mm High juice drain 470 mm Supplied delivery 7 presses 70x70cm, 8 pressing inserts made of acacia wood 41x41cm ; New machine - best condition

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Rated power up to 300 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1250 mm width 1210 mm He 1510 mm Juice tray in 1.4301 / AISI 304 press force 24 to Press pressure 380 bar Juice yield up to 75% connection for juice drain 30mm High juice drain 420 mm Scope 9 pressing tins 80x80cm, 10 pressing inserts made of acacia wood 50x50cm ; New machine - best condition

TECHNICAL SPECIFICATIONS Manufacturer: HENKE Designation: Production plant for concrete block slabs Type: UNI 2000 Year of construction: 1995 Operating hours: 11,543 h COMPOSED OF: Item 010) Fully automatic rotary table top pressure press UNI 2000/600/7 Item 020) Attachment distribution device for fine-grained attachments Pos. 030) Fully automatic dividing disc dosing unit with 8-fold ejection Item 040) Fully automatic direct washout system "WESER 100/2" for flat laying (horizontal) Item 050) Moulding frame device 400 x 400 mm, 2-fold Pos. 070) 2 x chain conveyor 1.50 m long Item 080/120) Pallet destacker Item 090) Cleaning brush Item 100) Pallet oil roller Item 110) Intermediate transport Pos. 130) Plate removal device Item 160) Stacking arm with bearing block Item 170) Chain conveyor 5 m long Pos. 180) 2 x Plate Pack - Lifting Item 190) Parcel push-off device  ...

- two rated power up to 600 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50 Hz (3 phases) Electrical fuse 16 A Laenge 1890 mm width 1210 mm He he 1510 mm Juice pan in 1.4301 / AISI 304 press force 24 to Press pressure 380 bar Juice yield up to 75% connection for juice drain 30mm High juice drain 420 mm Scope 18 pressing tuecher sier 80x80cm, 20 press inserts made of acacia wood 50x50cm ; New machine - best condition

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

- the classic must press in fruit processing nominal power up to 180 kg/h engine power 1.1 (1.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1078 mm width 800 mm Hoehe 1700 mm Hoehe Acceptance 1 142 mm Basket in 1.4301 / AISI 304 press force 16.1 to Press pressure 320 bar Juice yield up to 65% Connection for juice flow High juice drain 480 mm Hoehe marc ejection 642 mm Scope of delivery 1 press bag 60l, 3 inserts of 38cm, 3 press inserts made of acacia wood ; New machine - best condition

Bucher Press HP 5000

Rated power up to 300 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1178 mm Width 800 mm Hoehe 1907 mm Juice pan in 1.4301 / AISI 304 Press force 24.2 to Press pressure 380 bar Juice yield up to 65% Connection for juice drain 30mm High juice drain 525 mm High marc ejection 640 mm Supplied 1 press bag 100l, 3 inserthuellen 48cm, 3 press inserts made of acacia wood 48cm ; New machine - best condition

Machine type: Hose press / pneumatic Manufacturer: Peters Type: NDP YOC 2000 Condition: used / good Offer will only be sent if a complete imprint is provided! Price 1.250 Euro incl. 19% VAT free loaded. Location Warstein , Germany Reference M-PET-0124 DESCRIPTION We offer you a used hose press from the manufacturer Peters. Data to follow. Heavy-duty design Pressure 8 bar Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!