rotary milling table used for sale

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabinDMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampiTool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard)Number of tools 150Preparation measuring probe TS640 ...

GeneralHorizontal machining centre - Horizontal milling head - Chip trough with integrated Coolant tank 300 l / 130 gallo; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Cross1050 mmLongitudinal800 mmVertical1000 mmCabineFull protection cabinDirect measuring systemDirect path measuring systemNC swivel rotary tableNC swivel rotary table with pallet carrier max. table load: 600 kg / 1,323 lbs rotation B axis: 360° swivel range A axis: 25° / -200° range X / Y / Z-axis: 800 x 1,095 x 1,050 mm / 31.5 x 43.1 x 41.3 in axis kinematics A / BAdditional T-slot pallet 630 mm x 630 mmAdditional T-slot pallet 630 mm x 630 mm / 24.8 in x 24.8 in T-slots 14 mm / 0,55 in, clamping surface following DIN 55201-A2Clamping hydraulics 2/4 channe ...

Travel X/Y/Z: 2500mm/1000mm/770mm, table dimensions X/Y: 3200mm/1000mm, spindle speed: 8000rpm, tool positions: 40, tool holder: SK40, max. workpiece weight: 3000kg, feed rate: 30m/min, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 6500mm/4500mm/3700mm, weight: approx. 21000kg, control: Heidenhain iTNC 530, control hours: 67334h, machine hours: 56616h, operating hours: 15872h. Including internal coolant supply, 3D measuring and infrared probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible.

Travel X/Y/Z: 2300mm/800mm/600mm, table dimensions X/Y: 1400mm/750mm, rotary table dimensions X/Y: 800mm/630mm, spindle speed: 12000rpm, tool positions: 30, tool holder: SK40, coolant pressure: 20bar, feed rate: 30m/min, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6200mm/3700mm/3600mm, weight: approx. 16000kg, control: Heidenhain iTNC 530, control hours: 63330h, machine hours: 61892h, operating hours: 28295h. Including internal coolant supply, 3D measuring probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible.

Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Paso P700C, year of manufacture: 2001, machine dimensions X/Y/Z: approx. 1650mm/1550mm/2450mm, weight: approx. 1700kg. 3) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Signal lamp with 4 colours standardSignal lamp with 4 colours Red: General error Yellow: Intervention necess ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque64 NmTorque (100% DC)43 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.10000 rpmWeight approx.5600 KgTropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

5 pcs end mill MK, various, incl. SK50 mount For boring mill MK or milling machine SK50 , See also our post End mills ! Also have items with SK40 .

Brass blank, brass plate, sides milled, L-345mm, W-230, H-70mm, weight: approx. 48kg. Price: Euro 480,-, net ex works !

Router 600 router Spindle to arm distance 600 mm Twin speed spindle drive motor with 2.2/1.5 kw Two spindle speeds 9000/18000 RPM Spindle tilt angle adjustment 45-90-45 degrees Vertical spindle stroke 80mm Height-adjustable table Pneumatic control of the spindle from the pedal

UNIVERSAL MILLING MACHINE Inv. No. 13.147J1 Make TOS Model FA3AH Mach. No. 1854 Table 300 x 1,375 mm Longitudinal Travel (X) 890 mm Cross Travel (Y) 275 mm Vertical Travel (Z) 400 mm Taper ISO 40 R.P.M. 45 – 2.000 KW 4 Volts 400 Cycles 50 Including Coolant attachment Emergency stop Auction-ID: A1-45737-175

UNIVERSAL MILLING MACHINE Inv. No. 12.315J1 Make INDUMA Model NL87 Serial number 75479 Table dimensions 2200 x430 mm Longitudinal travel (X) 1500 mm Cross travel(Y) 420 mm Vertical travel (Z) 530 mm Taper ISO 50 R.P.M. 36 – 1,350 (16x) HP 25 Volts 400 Cycles 50 Including: Universal Milling Head Coolant Auction-ID: A1-45737-110

CNC BED MILLING MACHINE Inv. No. 12.608LM Make RAMBAUDI Model VERSAMILL12 Control CNC PILOT GRUNDIG Mach. No. 82601 Table dimensions 1600x510 mm Longitudinal travel (X) 1.100 mm Vertical travel (Y) 820 mm Cross travel (Z) 620 mm Taper ISO 50 R.P.M. 22-2000 kW 8 Volts 380 Auction-ID: A1-45737-111

CNC UNIVERSAL MILLING MACHINE Inv. No. 13.165J1 Make MIKRON Model WF 31DCM Machine No. Control HEIDENHAIN TNC 155 Table dimensions 460 x 800 mm Longitudinal travel (X) 560 mm Cross travel(Y) 500 mm Vertical travel (Z) 400 mm R.P.M. 40 – 4000 Rapid traverse X-Y 4000 mm/min Rapid traverse Z 3500 mm/min Quill travel 90 mm kW total power 10 kW drive power 3.3 / 4 Machine weight 2540 kg Auction-ID: A1-45737-177

CNC MILLING MACHINE Inv. No. 12.565J Make TOS Model FGS 40/50 CNC Mach. No. 43400083 Control Heidenhain TNC 355 Table 400 x 1,250 mm Longitudinal Travel (X) 850 mm Cross Travel (Y) 500 mm Vertical Travel (Z) 500 mm Taper ISO 50 R.P.M. 35 – 1.800 kW 7,5 Volts 380 Cycles 50 Auction-ID: A1-45737-198

CNC MILLING MACHINE Inv. No. 13.112J1 Make HO-CHUN Type UH-1250A Mach.no. 5123 Control HEIDENHAIN TNC 360 Table 400 x 1,800 mm Longitudinal Travel (X) 1,250 mm Cross Travel (Y) 540 mm Vertical Travel (Z) 470 mm Spindle BT 50 R.P.M. 275 – 2.000 KW 7 Volts 380 Cycles 50 Auction-ID: A1-45737-173

Auction-ID: A1-45737-148

NCT A3400 – CNC Milling Machine General data: Manufacturer: NCT Kft., Budapest Model: A3400 Year of manufacture: 2020 Serial number: P19075 Machine type: CNC machining center Condition: Unknown Technical details: Power: 22 kW Voltage: 400 V Current: 38.83 A CE marked: yes Equipment: Heidenhain DA 400 air preparation unit Enclosed working area CNC control panel Description: Modern CNC milling machine NCT A3400 designed for precision machining operations. The machine features a fully enclosed workspace, advanced control system, and integrated air preparation unit, making it suitable for industrial production environments requiring high accuracy and reliability. Auction-ID: A7-46004-1

Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible.

Highly dynamic precision milling machine OPS-INGERSOL EAGLE-V5 / Precision-Line Year of Make: 2025 Travel distances: X= 550 mm, Y= 400 mm, Z= 400 mm Table Type: Swivel Rotary Table / Torque Drives Spindle holder: HF spindle HSK-E40 with DDF; Fisherman Spindle speed: 1 - 42,000 rpm Spindle power: 15kw Torque S6 (60%) 6.7Nm Tool magazine: 100 places Control: HEIDENHAIN Weight: 8500Kg

Engine power: 2 hp; heavy standing model

Spindle swivel: Yes -5 to 45Â; Height adjustment: handwheel; Swivel adjustment: handwheel; Milling jaw adjustment: manual; Altitude display: mech. Counters; Swivel angle indicator: mech. Counters; Milling stop indicator: mech. Counters; Milling spindle diameter: 30mm / new milling spindle; Speeds: 3000, 4500, 6000, 9000; Motor power: 5.5 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2000mm; Machine depth: 1400mm; Weight: 900kg;

Spindle swivel: Yes 0 to 45Â; Height adjustment: electric/position control; Swivel adjustment: electric / position control; Milling fence adjustment: electric / position control; Milling jaw adjustment: manual / handwheel; Altitude display: digital display; Swivel angle display: digital display; Milling stop indicator: mech counter; Aigner integral stop: yes; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 7000, 10000; Motor power: 7 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2599mm; Machine depth: 900mm;

Spindle swivel: Yes -5 to 45Â; Height adjustment: manual/handwheel; Spindle stroke: 142mm; Swivel adjustment: manual / handwheel; Stop adjustment: manual; Altitude display: Scala; Swivel angle indicator: Scala; Milling stop indicator: Scala; Spindle diameter: 30 mm; Spindle length: 140mm; Max. tool diameter: 250mm; Speeds: 3500 / 6000 / 8000 / 10000rpm; Motor power: 5.3 kW; Engine brake: Yes, automatic; Table size: 1000mm x 520mm; Carriage length : 1200mm; Suction connection: 2 x 120 mm; Machine length: approx. 1200 mm; Machine width: approx. 900 mm; Weight:

Spindle swivel: Yes 0 to 45Â; Height adjustment: handwheel / electric; Swivel adjustment: handwheel / electric; Milling jaw adjustment: manual; Altitude display: digital display; Swivel angle display: digital display; Milling stop indicator: mech counter; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 7000, 10000; Motor power: 7 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2599mm; Machine depth: 900mm; Weight: 655kg;

Working width: 260 mm; Working height: 130 mm ; Working waves: 5; Spindle arrangement: down, right, left, up, down; Slot bed: yes; Motor power shaft bottom: 5.5kW; Motor power shaft right: 5.5 kW; Motor power shaft left: 7.5 kW; Motor power shaft top: 7.5 kW; Motor power shaft bottom: 7.5 kW; Adjustment shaft bottom: crank; Adjustment shaft right: crank; Adjustment shaft left: crank; Adjustment shaft top: crank; Planer heads: Centrolock; Feed speed: infinitely variable; Feed roller pressure: pneumatic; Current consumption: 50A; Current consumption: 71.7A;

Milling fence adjustment: via handwheel; Milling stop Gauge: Siko meter; Milling jaw adjustment: handwheel; Milling jaw gauge: Siko counter;

COPY SHAPER machine model BALESTRINI CP 90 - 4 second hand machine working condition : Excellent CE mark : YES the machine has been designed for the production of parts of tables , chairs , furniture , etc. the machine executes shaping and sanding operations simultaneously on two sides of a workpiece , with the aid of a template prepared according to the desired shape with accident prevention cabin as shown in the photo machine composed by n.04 working units : 1+1 shaping units . motor power Hp 10 each one 1+1 shaping / sanding units . motor power each one Hp 4,5 / 6 ( 2 speeds ) max. working width mm.500 max. workinh heigth mm.180 max. working length mm.2500 hydraulic carriage . pump motor power Hp 5,5 adjustable hydraulic carriage advance speed: 1:18 m/min. hydraulic carriage return speed: 75 m/min. volt. 380/50

Key data: 1875 mm, 1550 mm, 1345 mm

CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Manufacturer: Perforex Model: BC 1007 HS Type of Machine : Milling Machining Center Find more here - / Contact us at -

A CNC double-station milling machine Schwäbische Werkzeugmaschinen with 3 axes is available. Stations: 2, travel X/Y/Z: 700mm/500mm/500mm, positioning accuracy: +/-0.02mm, position scatter: +/-0.01mm, rapid traverse: 25m/min, feed force: 8500N. Machine dimensions X/Y/Z: approx. 6700mm/3200mm/3200mm, weight: approx. 11500kg, control: Siemens Sinumerik 840. The left sliding cover is defective, however another one from stock can be adapted for it. Documentation available. An on-site inspection is possible.

Includes: (1x) Gedore tool trolley, Adjutant 1580. Auction-ID: A1-45979-108

Portable end mill sharpener is accurate and rapid, easy operation with no skill to grind. Can grind 2-flute, 3-flute, 4-flute end mill. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. Standard with SDC grinding wheel for the Carbide material. Grinding Range:Φ4-Φ14, Point Angle:0°~5°, Power:220V, Motor:160W, Speed:4400rpm, Standard Equipment:Grinding wheel:SDC (for carbide material)×1, Six collets:Φ4,Φ6,Φ8,Φ10,Φ12,Φ14 Machine condition: unchecked. Approx. Transport dimension: LxWxH 350 x 250 x 250 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-273

Equipped with: (1x) Bosch milling machine, type: GGS27L Auction-ID: A1-45979-122

Portable end mill sharpener is accurate and rapid, easy operation with no skill to grind. Can grind 2-flute, 3-flute, 4-flute end mill. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. Standard with SDC grinding wheel for the Carbide material. Grinding Range:Φ4-Φ14, Point Angle:0°~5°, Power:220V, Motor:160W, Speed:4400rpm, Standard Equipment:Grinding wheel:SDC (for carbide material)×1, Six collets:Φ4,Φ6,Φ8,Φ10,Φ12,Φ14 Machine condition: unchecked. Approx. Transport dimension: LxWxH 350 x 250 x 250 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-101

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17032

Serial number: 36434 Operating voltage: 380 - 415 V Connection: 1.5 kW Speed: up to 1400 rpm Rated current: 5.7 A Speed: from 70 to 2590 rpm Drilling depth: up to 170 mm Table dimensions: 650 x 270 mm with three grooves incl. three-axis digital display from the manufacturer HEIDENHAIN also an attached vice, jaw width: 85 mm and a matching dividing head Auction-ID: A7-46287-93

Table dimensions: 630 x 150 mm incl. clamped vice, jaw width: approx. 110 mm Auction-ID: A7-46287-29

Includes: (1x) Gedore tool trolley, Adjutant 1580. Auction-ID: A1-45979-106

Machine hours reading approx. 80,276 hours, spindle hours reading approx. 23,414 hours. Equipped with: 5-axis milling head type VH30 with A- and C-axis (A-axis ±110°, C-axis 360°), suitable for simultaneous 5-axis milling. Equipped with high-frequency spindle with HSK 63A mount, max. speed 22,000 min⁻¹, power 60 kW (constant from approx. 6000 min⁻¹) and max. torque approx. 95 Nm. Automatic tool changer KTC Handlingstechnik, type: ATC 60/HSK-A63 (60 positions) with carousel magazine. Includes chip evacuation and peripherals consisting of: (1x) KÜMA refrigerant/filter system type KF1/515WB, (1x) KÜMA filter unit type BF Gr.3, (1x) KÜMA pump unit type FA10/03, (1x) H.I.B Systemtechnik industrial chiller type RKH/W-14300 (R134a), (1x) LTA Industrial Air Cleaning oil mist extraction type AC 2000 H Solid. Suitable for high-speed processing of aluminum and composite, amon ...

Heavy-duty Korean-built machine, suitable for demanding metalworking operations and machining of large workpieces. Equipped with an adjustable spindle enabling angular machining, with an angle table mounted on the machine. Technical data: • Model: KMB-U3 • Year of manufacture: 1997 • Country of origin: South Korea (Kiheung Machinery Co., Ltd.) Table size: • 1700 x 470 mm T-slots: • 5 x 20 mm • spacing: 80 mm Max. table load: • approx. 1500 kg Spindle taper: • NT50 Max. spindle speed: • 1720 rpm Feed rate: • X/Y: 2000 mm/min • Z: 1000 mm/min Auction-ID: A7-46285-4

Serial number: 100451 Clamping surface: approx. 400 x 120 mm with hand lever operation Auction-ID: A7-46287-200

Portable end mill sharpener is accurate and rapid, easy operation with no skill to grind. Can grind 2-flute, 3-flute, 4-flute end mill. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. Standard with SDC grinding wheel for the Carbide material. Grinding Range:Φ4-Φ14, Point Angle:0°~5°, Power:220V, Motor:160W, Speed:4400rpm, Standard Equipment:Grinding wheel:SDC (for carbide material)×1, Six collets:Φ4,Φ6,Φ8,Φ10,Φ12,Φ14 Machine condition: unchecked. Approx. Transport dimension: LxWxH 350 x 250 x 250 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-37

Serial number: 4432 Operating voltage: 380 V Frequency: 50 Hz Rated current: 13 A Speed: from 40 to 2000 rpm Tool holder: SK 40 Feed range infinitely adjustable: 5 - 500 mm/min Creep traverse: 4 mm/min Rapid traverse: 1200 mm/min Table Longitudinal movement: 300 mm Spindle block Transverse movement by hand: 160 mm Support Vertical movement motorized: 280 mm by hand: 290 mm without protective bar: 330/340 mm Vertical milling head on spindle block can be moved by hand: 100 mm Table dimensions: 600 x 210 mm with 4 grooves and an attached vice, jaw width: 160 mm Auction-ID: A7-46287-78

Batch of cutting tools, cutters, inserts and measuring components, various brands including Seco and Renishaw. Auction-ID: A1-45979-39

Auction-ID: A1-45979-101

Serial number: 100135 Power: 1.1 kW Max. spanwidth: approx. 250 mm Auction-ID: A7-46287-191

A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible.

MAZAK MTV 414 CNC vertical machining center was built in 1992 in the United Kingdom by YAMAZAKI MACHINERY UK LTD. The offered machine is an excellent choice for machining workpieces with a maximum weight of 500 kg. Thanks to its reliable components and extremely rigid design, the MAZAK MTV 414 guarantees the best machining results throughout its service life. The machining process is performed inside a large work area with a work table with a length of 900 mm and a width of 410 mm, a spindle and a capacious tool magazine. The spindle, driven by a powerful motor, rotates at a maximum speed of 7000 rpm and operates in three X,Y,Z axes with feeds of 560 mm, 410 mm and 460 mm respectively. All cutting tools are stored in a 24-position tool magazine with an automatic tool changing system (ATC). All this is complemented by the intelligent MAZATROL M32B CNC controller with its intuitive interfa ...