rotary milling table used for sale

Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation

bore capacity in steel (diameter): 110 mm x-travel: 2.100 mm y-travel: 1.500 mm z-travel: 1.000 mm w-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVA Working Spindle: - boring quill diameter: 110 mm spindle taper: DIN 69871 ISO 50 spindle power: 22 kW transmission ratio: 2 turning speed range: 2.000 U/min clamping table: - max. workpiece weight: 4.000 kg surface area: 1.100 x 1.300 mm feeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/min feed range W-axis: 0 - 10.000 mm/min rapid motion - x-axis: 10.000 mm/min rapid feed Y, Z, W-axis: 10.000 mm/min Control: total power requirement: 22 kW weight of the machine ca.: 23.000 kg dimensions of the machine ca.: 7,1 x 6,5 x 3,7 m Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Stock number: 3896 PROCESSING Manufacturer: HERMLE , Type: C800 V Machines NO.: 14337, Year of manufacture: 2001 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Stepless spindle speeds 0-16000 rpm Spindle motor 25/16.8 Kw Total power 31 KVA Control Heidenhain 430 - 3 Axis Fabr. Operating hours spindle 9666 hours Accessories: Tool holders 2 pcs Operating instructions Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weight: 7000 kg

x-travel: 3.000 mm y-travel: 1.600 mm z-travel: 1.200 mm control: HEIDENHAIN iTNC530 HSCI B-axis (swivelling head): +/- 100 ° C-axis (milling head rotation axis): +/- 240 ° feed and rapid traverse: : Rapid traverse B- and C-Axis: 50 rpm rapid feed Y,X,Z: 40.000 m/min Accelerations (X, Y and Z): 4 m/s² Machine table:: : Clamping surface: 3.500 x 1.750 mm T-slots: 27 x 22 mm H12 T-slot - distance: 125 mm max. workpiece load: 7.000 kg/m2 Max. distance table to spindle nose: 1.356 mm 2-Axis Fork Milling Head T21C: turning speed range:: 10- 24.000 min-1 Drive power (S1/S6):: 42/50 KW Torque (S1/S6):: 67/84 Nm Tool bore: HSK-A 63 tool magazin:: : number of tools: 50 tool holder: DIN 69873 HSK A63 Max. Ø tool: 115 mm max. tool-Ø adjacent slots free : 125 mm max. tool length: 300 mm max. tool weight: 12 kg coolant equipment: : tank capacity: 1.400 l connected load: voltage: 3x 40 V 50 Hz  ...

FIXED BED MILLING MACHINE "CORREA" FEATURES: Dimensions • Table dimensions: 2,000 x 630 mm • Number of T-slots: 6 • T-slot dimensions: 18 mm Axis Travels • Longitudinal travel X: 1,800 mm • Cross travel Y: 800 mm • Vertical Z Travel: 800 mm Head • Head model: Manual universal • Tool clamping: Hydraulic • Taper: ISO 50 • Speed range: 25 – 3,250 rpm • Mandrel power: 16 Kw Machine feeds • Working progress: 5 - 5,000 mm/min • Fast feeds: 8,000 mm/min Weights and dimensions • Max. weight on table: 3,000 kg • Approx. machine weight: 10,000 kg • Machine dimensions: 4,920 x 2,714 x 2,417 mm

Offer 24103 Specifications: - Working range of the axes - X / Y / Z 450 / 400 / 420 mm - Table size 850 x 250 mm - Max. distance from spindle to table 400 mm - Working spindle speeds horizontal 30 - 1275 rpm - Working spindle speeds vertical 66 - 2840 rpm - Feeds X – Y and Z axis - Rapid traverse - Drive 400 V / 3.2 kW - Space requirement approx. W 1400 x H 1800 x D 1400 mm - Weight approx. 1400 kg

Stock number: 3904 PROCESSING Manufacturer: BRIDGEPORT, Type: VMC 1000 30 Machine NO.: 822918, Year of manufacture: 2002 Specifications: Table size 1150 x 580 mm Large table load 800 kg Longitudinal movement (X) 1020 mm Transverse movement (Y) 510 mm Vertical movement (Z) 500 mm Spindle cone ISO 40 Spindle speeds 6000 rpm Total power 25 KVA Tool changer 30 places Control Heidenhain Fabr. Accessories: Chip conveyance. Length: 2200 mm, Height: 2800 mm, Width: 3200 mm, Weight: 4400 kg

Work table 300x250 mm; 1500 Watt Auction-ID: A1-49889-130

revolutions per minute: 8000 U/min x-travel: 1000 mm y-travel: 500 mm z-travel: 570 mm Control: Siemens weight of the machine ca.: 5000 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 3914 PROCESSING Manufacturer: FEELER, Type: FV 800A Machines NO.: VG806, Year of manufacture: 1999 Specifications: Table size 950x425 mm Large table load 500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 450 mm Vertical movement (Z) 505 mm Spindle Taper 40 ISO Spindle speeds 6000 rpm Total power 5.5 kW Tool changer 24 places Rapid traverse X/Y/Z 18/18/15 m/min Control Mitsubishi Meldas 500 Fabr. Controlled in axes 3 Accessories: Cooling water system. Machinery vise. Tool holders pcs Operating instructions Length: 3060mm, Height: 2735mm, Width: 2300mm, Weight: 4100Kg

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

Offer 24303 Specifications: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y ( transverse ) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance between milling spindle and table surface 400 mm - Tool holder SK 40 - Working spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeders X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axis digital display HEIDENHAIN - Vertical milling head can be swivelled - Horizontal spindle counter holder - Machine vise

Dear Ladies and Gentlemen, the machine has not run much, it has been treated with care and is fully functional.

SPECIFICATIONS: Max. machining length mm: 2500 Max. machining width mm: 350 01 - 02 Milling/grinding units per week 7.5 03 - 04 Milling/grinding units per week 4.0 08 Workpiece clamping presses Fast workpiece return

Hello Ms. Bader, for sale is a used, fully functional milling machine of the brand - Schaublin 53 incl. accessories.

MIKRON Cutter Mod. VCP 1000 Machinable dimensions: square = 125x125 round 152 Machine visible in operation, in excellent condition.

Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3,5 T (We have a second machine for spare parts)

Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

For sale good working CNC milling machine Deckel FP4 AT with two vices and several tools.

x-travel: 560 mm y-travel: 500 mm z-travel: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,22,22,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for sale NEW - ALDURO Drilling-Milling Machine BFM 20V2 Drilling capacity up to 20 mm Spindle Holder MK 2 Head swivels +/- 90° Stepless speed adjustment 50 - 2250 rpm Cross table 500 x 180 mm Digital X-travel 195 mm Y-travel 140 mm Motor 1.1 kW, 230 V Machine without base (base), Can be purchased separately Weight approx. 113 kg further models and inquiries to FSA Maschinen AG

Milling machine DECKEL FP5NC -axis: X-710 Y-600 Z-500

Rated voltage: 400V, phases: 3, frequency: 50Hz, max. power consumption: 57.9kVA, total current consumption: approx. 83.8A, max. motor current consumption: 94A, current interruption at: 10kA, connected load: 47.8kVA, control: Okuma OSP-U100L, an on-site inspection is possible.

Deckel Maho Universal Milling Machine DMU 125 P 1,250 x 880 x 800 mm Motor spindle 18,000 1/min. Tool holder SK 40 Automatic Swivel Milling Head Horizontal tool changer setup Double gripper 30 magazine slots Coolant tank 600 litres Internal cooling IKZ Form AD Conveyor Rotating viewing panel 3D path control TNC 430 NC rotary table diameter 1,250 x 1,000 mm Universal milling head with controlled B-axis Electronic handwheel Probe Infrared Heidenhain TS 631

CARVING machine type ANDREONI STANDARD 12 second hand machine working conditions : good Technical details : - rotary device for the simultaneous rotation of the model and the pieces (3D) - manual chuck of mandrins unit - also to work with flat pieces n.12 spindles distance betwen spindles mm. 300 rotation speed by HF converter rpm 6.000 / 12.000 max. working length ( on rotation ) mm. 1900 net weigth kgs. 2500 volt. 380/50 With tools : Yes ( as in photo attach )

Unused stock machine from the demonstration room BJ 2021 - V 700 CNC machining center Siemens 828D Unused stock machine from the demonstration room BJ 2021 - MCV CNC Machining Center Siemens 828D Please see the photos for the details

The data of the machine can be found in the attached files. The machine is still energized and can be examined. The machine is available now.

FEELER VMP 32 CNC vertical machining center was built in 2012 in Taiwan. This versatile machine with extensive machining capabilities is specially designed for precision machining of heavy workpieces weighing up to 800 kg. To achieve excellent precision and accuracy in machining process, reliable components in the form of the spindle and cutting tools taken from the 22-position tool magazine are utilised. In addition, movement of the X,Y,Z axes is performed on ground rolling guideways, resulting in excellent dynamics and feed repeatability. All machining parameters are programmed in an intuitive CNC control from the renowned company FANUC. The FEELER milling center weighs 5800 kg. Technical data of the FEELER VMP 32 CNC milling machine - CNC controller: FANUC Series 0i-MD - feed in the X/Y/Z axis: 820/520/505 mm - rapid traverse in the X/Y/Z axis: 40/40/30 m/min - work table surfa ...

Heynumill 2700-PF from the manufacturer Heyligenstaedt. The machine is also energized and can be viewed at any time. Please refer to the photos for the data If you have any questions or need more information, please feel free to contact me.

Dear Ladies and Gentlemen, we sell our machine Deckel FP4 NC and associated div. milling cutter chucks. Please see the photos for details. The machine is energized and can be viewed at any time.

Offer 24309 Specifications: - Table size 710 x 315 mm - Working range of the axes - X (longitudinal) mech./ hand 400 / 420 mm - Z (vertical) 350 / 370 mm - Y 220 / 228 mm - Distance between milling spindle and table surface 50 - 465 mm - Tool holder ISO 40 - Spindle speeds regulated horizontally in 16 steps. 56 - 1800 rpm - Spindle speeds regulated vertically in 16 steps. 56 - 1800 rpm - 16 feed speeds 11 - 355 mm/min - FAGOR digital display - Drive 400 V / 2.2 kW - Space requirement approx. W 1600 x H 1900 x D 1600 mm - Weight approx. 1300 kg

x-travel: 1000 mm y-travel: 380 mm z-travel: 430 mm total power requirement: 5,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2 m No. 4471 Universal milling machine IBERIMEX U 1000 Working area: 1000 x 540 x 430 Drive: 5.5 kW Control: Visulesta 4 digital display Table clamping surface 1500 x 360 mm documentation Spindle holder ISO 50 Speed range 40 - 1750 min-1 Space requirement approx. 2 (3) x 2 x 2 m Weight approx. 3 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of 2008, Complete with vacuum system and unwinder, without dust extraction, Issue according to instructions Auction-ID: A3-50009-3

Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg

CNC Vertical Slot Milling Machine Year of Make: 1989 Workspace: x-axis 1300mm y-axis 150mm z-axis 200mm Tool holder: SK40 Spindle speed: 350 rpm – 4000 rpm Max. groove length: 1200 mm Max. groove width: 40 mm Clamping area: 1300 mm x 300 mm Weight: approx. 3500 kg Coolant Setup Dimensions: 1600 mm x 1500 mm x 1800mm (LxWxH) Hydraulic system Partially overhauled, milling spindle new. Commissioning within a radius of 200 km included in the price.

YCM FP100A CNC machining center was built in 2014 in Taiwan. Equipped with state-of-the-art technology and components from renowned brands, the machine is used for precision 3D machining of heavy workpieces weighing up to 1000 kg. During machining, the reliable spindle built in IDD (Isolated Direct Drive) technology moves on roller guides from Japanese company IKO, which minimises the effects of bending torque and also ensures high positioning accuracy. In addition, the use of precision ceramic bearings guarantees quiet operation and long life of the spindle. The FP100 A milling center is offered with a comprehensive range of equipment, including a 30-position magazine with automatic tool changing and an intuitive CNC control by HEIDENHAIN. The controller’s excellent optimisation and multitude of functions significantly simplify operation and enable advanced machining programmes to  ...

YCM FP66A CNC machining center was built in 2013 in Taiwan. The machine, equipped with components from renowned brands and state-of-the-art technology, is used for precision 3D machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a powerful spindle, rotating at a maximum speed of 16000 rpm, and cutting tools taken from a 30-position magazine. The spindle moves in the X,Y,Z axis on roller guides of the Japanese company IKO with ball-and-screw systems, directly driven by digitally controlled servomotors. This solution ensures high positioning accuracy and repeatability over a long period of use. The FP66 A CNC vertical machining center also features a high-quality cast-iron gantry structure, which, correlated with the extra-wide base resting on the ground, minimises the effects of bending torque resulting from the hanging mass of the spindle. Th ...

Max. speed: 7500rpm, voltage: 230V, current consumption: 8.6A, frequency: 50Hz, power: 2000W. The machine can be controlled using a standard computer. The A-axis can be controlled and positioned via the software. Including software/CD. Without PC. An on-site inspection is possible.

There are five Friedrich Deckel FP 1 machines available. An on-site inspection is possible.

Key data: 3100 mm, 2100 mm, 1000 mm

First commissioning: 2024 Control: OSAI Arbeitsbereich / Working Ranges X-axis: 3,100 mm Y-axis: 2,100 mm Z-axis: 1,000 mm Clamping table: 3,100 x 2,100 mm T-slot spacing: 250 mm Table load: 1,000 kg Milling unit: Spindle power:10 kW Spindle speed: Max. 24,000 min-1 Torque: 10.9 Nm Tool holder: HSK 63F Drives Linear Axes Feed speed X/Y axis: up to 40 m/min Z-axis feed speed: up to 25m/min Electrical connected loads: Voltage: 400 V Frequency: 50 Hz Fuse: 45 A Power requirement: 35 kVA Dimensions & Weights: Machine space requirements: approx. 4,800 x 5,000 x 4,300 mm Total weight: approx. 6.5 tons Colour: light grey Auxiliary: - 15-fold tool changer - Mobile control panel Machine Condition: New Availability: Immediate - subject to prior sale

Key data: 4000 mm, 2700 mm, 1250 mm

Year of manufacture: 2024 Steuer / Control: Heidenhain TCN640 inkl. HR520 Handrad - handwheel Arbeitsbereich / Working Ranges X-axis / X-axis: 4,000 mm Y-axis / Y-axis: 2,700 mm Z-axis / Z-axis. 1,250 mm Clamping table: aluminium table with T-slots at a distance of 250 mm Milling Unit / Milling Head Spindle power: 22 / 25 kW Spindle speed / rotation speed: Max. 24,000 min-1 Drehmoment / torque: 18 Nm Tool holder: HSK 63A Drives Linear Axes / Feed & Acceleration Feed speed X/Y-axis / max feedrate X/Y-axis. Up to 60/40 m/min Feed speed Z-axis / max feedrate Z-axis: Up to 35 m/min Electrical Connection Values / Electronic Consumption Spannung / voltage: 400 V Frequenz / frequency: 50 Hz Fuse / current power: 45 A Power requirement / power required: 25 kVA Dimensions & Weight & Dimensions: Required space: approx. 9,100 x 5,100 x 4,400 mm Total weight /  ...

Control voltage: 42/48V, max. fuse rating: 35A, operating voltage: 380V, rated current: 20/22/24A, control: DECKEL DIALOG 11, an on-site inspection is possible.

power capacity: - kW volt: - V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

Key data: 4700 mm, 6100 mm, 1470 mm

Portal milling machine with fixed portal and 2 separately movable machine tables for pendulum machining. The tables can be coupled to form a large table. Designed for the typical applications in model and mould making and in the machining of (small) series parts with high efficiency. In addition, the machine can be equipped with a zero-point clamping system for quick replacement of clamping fixtures or prepared parts. Areas of work: X-axis: 4,700 mm Y-axis: 6,100 mm Z-axis: 1,470 mm A-axis: ± 115° C-axis: ± 360° Control: OSAI Openkey 2-axis milling head with spindle: Spindle power: 15 kW Spindle speed: max. 24,000 min-1 Torque: 20.9 Nm Tool holder: HSK 63F Tool tensioning: pneumatic blowing air / MQQ: outside Clamping table: Clamping surface: 2 x 1,950 x 2,500 x 213 mm (coupled: 4,000 x 2,500 mm) Aluminium with grid threaded holes Max load: 1000 kg distributed over th ...

Fully functional Mikron Milling Machine Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.

Carousel milling machine 1 shaft for BERMAQ cats mod. C.T.C. - CE - used - Drilling unit - spindle moulder - matr. 02010 - year 2002

x-travel: 5.500 mm y-travel: 1.400 mm z-travel: 1.000 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 6.000 x 1.200 mm max. workpiece weight: 13.500 kg/m² Nc rotary table: - position: rechts, bündig integriert in Tischfläche surface area: Ø 1.000 mm positioning accuracy: 360 x 0,001 mm T-slot number x size: 12 x 22 Abstand 100 mm Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 0,001 x 0,001° stepless Constant Power at 100 % ED: 28 kW Speed range, stepless: 15 - 5.000 min-1 max. torque: 815 Nm tool taper: SK 50 – DIN 69871 internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 80 Plätze diameter of tools max.: 125/200 mm workpiece length: 400 mm weight of tools max.: 20 kg changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min rapid in X/Y/Z: 25.000 ...

table length: 4100 mm table width: 1050 mm table height: 1600 mm total power requirement: 29 kW weight of the machine ca.: 28000 t dimensions of the machine ca.: 11X5X3,8 m Marke Kiheung Maschinen-Nr F668 Typ KNC-U1000 CNC-Marke Heidenhain CNC-Typ TNC 426 Baujahr 2002 Tischlänge 4.100 mm Tischbreite 1.050 mm Maximale Tischbelastung 8.000 kg X 3.600 mm Y 1.250 mm Z 1.600 mm Aufnahme BT50 Schnell 10.000 m/min Geschwindigkeit 0 - 4.000 RPM Beweglicher Tisch Huron-Fräskopf CNC gesteuerter Fräskopf Späneförderer Maschinengröße (LxBxH) 11.000 x 5.000 x 3.800 mm Maschinengewicht 28000 kg Magazinplätze: 30 Spindelantriebsmotor: 29 Kw Ausgestattet mit 4. Achse. Tischdurchmesser: 630 mm Ø Belastung: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.