129,001 used machines on RESALE, but how to find them? Machine Search
Welding table on lift table: Hole diameter: 28mm The table is made of 15mm thick steel S355 The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mm Ribbed underside for reinforcement. Table length 2000 mm Table width 1000 mm Load capacity 2000 kg Lifting height max. 1525 mm Total connected load 1.5 kW Connection voltage 400 V Condition: never used / new (5) Auction-ID: A7-46642-2
Welding table on lift table: Hole diameter: 28mm The table is made of 15mm thick steel S355 The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mm Ribbed underside for reinforcement. Table length 1300 mm Table width 800 mm Load capacity 1000 kg Lifting height 510 - 1550 mm Total connected load 1.5 kW Connection voltage 230 V Machine weight approx. 0.55 t Condition: never used / new (5) Auction-ID: A7-46642-27
PTO-driven rotary harrow / tiller, type RS1300C in used condition. Machine equipped with 3-point suspension and milling rotor with blades. Suitable for tillage, horticulture, agriculture and greenhouse work. Compact model suitable behind compact agricultural tractors and mini tractors. Auction-ID: A3-43534-11966
Table dimensions 2700 x 850 mm AFK bi-rotary head with 2.5° A and B shaft Auction-ID: A7-47069-1
clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table swiveling -Axles: adjustable with hand crank, see photos -Dimensions total: 530/350/H450 mm -Weight: 56 kg
Carriage length: 2500 mm; Cutting width at the width stop: 1200 mm; Cutting width at cut-to-length fence: 2500 mm; Cutting depth: 100 mm; Vorritzer: yes; Height and swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: Scala; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 300mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel swivel: yes 0 - 45Â; Height and swivel adjustment of the milling mandrel: handwheel; Altitude and
Carriage length: 2500 mm; Cutting width at the width stop: 1000 mm; Cutting width at cut-to-length fence: 3000 mm; Cut depth: 125 mm; Vorritzer: yes; Height and swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: Scala; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 400mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel swivel: yes 0 - 45Â; Height and swivel adjustment of the milling mandrel: handwheel; Altitude and
Type: 62416, rotary wheel valve with pre-valve flat slider, drive via spur gear motor with 3 kW / 42 rpm. Little ran.
Type: 9.3-456, Y.O.M.: 1991, inlet: 400 mm x 400 mm, overhauled, without motor.
Stainless steel pumps, Hilge, Fristam, various versions and sizes
Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new
Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale
Hydraulic Type Manufactured by Angelo Cremona Maximum Diameter 800 mm Minimum Diameter 120 mm
1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.
intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox
Material: steel Engine: 7,5 kW Weight: 8500 kg Length x Width x Height: 7500 mm x 2000 mm x 3000 mm With working platform Turning pipe: 44 U/min Length 5950 mm, diameter 1700 mm; two draft. Very good condition, overhauled. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.
Kat. No. 12-1170 in a very good condition Measurements and weight: LxBxH: 140 x 64 x 117 cm weight: 160 kg type: SRZ4 / 055LD Serial No. 279503 4,4 kW DN 65 130 l/min., 7800 l/h 7,5 bar For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat. No. 12-1120 in very good condition Type 125VT-DS Model: HTIRM Size: NW 65 Serial-No. 1251149 Original Price: Euro 30.000,- Measurements and Weight: LxWxH: 166 x 52 x 102 cm Weight: 330 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat. No. 12-1175 in very good condition Measurements and Weight: LxWxH: 125 x 66 x 92 cm Weight: 195 kg Model: HTIRM Type: 40VT-DS NW 50 Pressure: 10 bar Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat. No. 12-1165 in very good condition Measurements and Weight: LxWxH: 136 x 44 x 113 cm Weight: 125 kg 3 kW 60 l/min., 3600 l/h 2 bar DN 65 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat. No. 12-1125 in a very good condition Model: HTIRM Serial-No. 401543 Type: 40VT-DS NW 50 Pressure: 10 bar Measurements and Weight: LxWxH: 140 x 45 x 103 cm Weight: 140 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.
Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale
The blower step is general-outdated and available immediately. the rotary piston blower can be also delivered completely.
Probat valve rotary. Manufacturer: Probat GmbH ( Germany ) Type: 46 DN 315 Year: 2005
SACMI line for one and for two component caps, with control video system.
IBEX MOG 2130BA Serial No. 931278 / 01B 400V, 5.5A integrated fan motor Connections: DN 80 Double mechanical seal, sealingwater connections
AERZEN rotary blower GMB 14.8 - used, reconditioned - DESCRIPTION 3-bladed fan speed with integrated pulsation reduction Basic rack with integrated discharge silencer Tensioning device for the belt drive Pressure / vacuum valve Connection box with built-in non-return valve and flange for valve and starting discharge Drive motor (three phase motor) MANUFACTURER'S SPECIFICATIONS Manufacturer: Aerzen, Germany Type: GMB 14.8 YOM: 1976 TECHNICAL DATA Intake rate: 15,5 m ³/min Flow pressure: 0,73bar (max. 1,0 bar) Delta p: 730mbar Blower rev: 1.337rpm Motor: VEM 37kW 380Volts 50Hertz 1.460rpm CONDITION used, reconditioned, ready for operation SERVICE/RECONDITIONING New pulsation silencer box, new oil, new spray painting VISIT Please visit us at any time for an inspection. Test run is possible. REMARK Large stock of used machinery and equ ...
For sale rotary compression machine CCM032, produced in SACMI (Italy). Perfect condition with control video system.
1 x centrifugal pump ABB motors, used, type: M2AA180 M4 / IEC 180 M / L, 18 KW, flange connections, power approximately 100,000 ltr. / h, picture on the right, POS. 9, price: 1,200 1 x used centrifugal pump Hilge, type: HYGIA S-II / 20 d, 15 KW, connections DN 80/65, capacity approx. 80,000 ltr. / h, pictured left, POS. 10, price: 2.250,- Prices plus 19% VAT from stock Dolgesheim
1 x 8 sqm vacuum Rotary filters Padovan, BJ. 1985, in good condition, always perfectly maintained, complete with precoat tanks, 2 x vacuum pump and control, available immediately
Rotary vane vacuum compressor - running dry Manufacturer: Becker Type: KVT 3,100 Motor: 400V Status: Generalueberholt and repainted Performance: 12 months; ready for use
This rotary valve was used, was only used for spare parts storage for a foreign project and was therefore never in use. The rotary conveyor thus has no operating hours and is in a new condition. The rotary valve, with square inlet, is suitable for the controlled supply and dosing of powdered and granulated bulk materials from silos, funnels, pneumatic conveyor systems, filter systems and cyclones. Name: Rotary valve Manufacturer: Sunds MDF Type: LAF-200 Year of construction: 2010 Material: Normal steel Drive motor: 11 kW Dimensions: L 3400 x W 2200 x H 2370 mm Empty weight: approx. 4500 kg Speed: 1475 / 22 Condition: Used Tech. Documentation: No Note: Inlet L: 1980 mm x W: 1180 mm, Outlet L: 2180 mm X W: 1000 mm, 7 chambers. The rotary valve has no operating hours and is in a new condition. Price: On request
Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.
Rotary vane compressor - running dry Manufacturer: Becker Type: KDT 3.140 motor: 400V 7.5 KW/50Hz suction power: 140m3/h Compression pressure: 2500 mbar (abs.) 1500 (overprint) Status: Generalueberholt and repainted Procurement: 12 months Zubehoer: - User manual We are happy to answer any questions you may have. ready for use
Rotary vane vacuum pump oellubized Manufacturer: Busch Type: RA 0063F Including: oel filling Status: Advance performance Performance: 12 months Delivery time: by arrangement; ready for use
Rotary vane vacuum pump oellubized Manufacturer: Leybold Type: Sogevac SV 300 B Cat No.: 960702 Status: Preliminary performance as goodas nominal power suction power: approx. 280 m3/h end pressure: approx. Gas ballast Special equipment: thermal switches, FKM seals Performance: 12 months Zubehoer: user manual, mineral filling delivery time: from stock; ready for use
Rotary vane vacuum pump oil lubricated Manufacturer: DVP Type: LB. 4 Performance: 12 months Status: Generalueberholt Motor: 230V Suction power: 4m3/h End pressure: 2mbar (abs.) = 99.8% vacuum
Rotary vane vacuum pump Two-stage oel lubricated Manufacturer: Pfeiffer Type: DUO 250 Cat.-No.: PK D27 602 / K141 Status: Used (functional!) (A general recovery is offered) suction power: approx. 250 m3/h Endduck: > 5x10e-3 mbar Performance: 12 months (in case of general recovery) Including: user manual and oil Delivery time: ex works ; ready for use
Unused Düchting Centrifugal Pump Type HK200x6 Year of construction 2015 Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 300 m³/h H 490 m N 1480 1/min P 560 kW Further Düchting pumps in stock Applications: Conveyance of contaminated, chemically neutral or aggressive liquids with up to 10% solids content. Main water drainage in mining Secondary water drainage and mine air cooling in mining Pressure boosting systems in industrial processes Water supply and water treatment plants Condensate conveying Mineral fertilizer industry Oil & Gas Applications LHK125x6 HK150x11 Q150m³/h H730m n1485 1/min P430kw HK250 HPXU100x10 Q90m³/h H250m n1485 1/min P100kw HK150x5 Q163m³/h H325m n1485 1/min P210kw HK150x9 Q220m³/h H435m n1485 1/min P435kw HPXU150-200x5 Q150m³/h H665m n1485 1/min P415kw HK200x6 Q480m³/h H470m n1485 1/min P792kw HK200x4 Q500m³/h H265m n1485 ...
Rotary vane vacuum pump Manufacturer: Busch Type: R5 RA 302 D Voltage: 50/60Hz 400V Nominal suction digesters: 300m3/h End pressure: smaller 0.5hpa(mbar) Status: Generalueberholt Gewaehrleistung- 12 months Including: engine re-storage, repainting, electric check delivery time: from stock; ready for use
Rotary vane vacuum compressor - running dry Manufacturer: Becker Type: DVT 3.60 & DVT 3.80 Motor: 400V Status: Generalueberholt and Neu-painted Gewaehrleistung: 12 months; ready for use
maximum number of results exceeded
please refine your search
2.400 € 
