138,093 used machines on RESALE, but how to find them? Machine Search
Equipped with 2 levels, Photos purely indicative Auction-ID: A3-50009-211
Rail guide table, linear unit STAR (REXROTH) 1460-305-00 ID no. 60221 working area approx. 0...380 mm table: 320 x 225 mm drive shaft: Ø 14 mm with limit switch and position sensors ! used, tested ! Dimensions: 830 x 410 x 95 mm
HT 600 Lift table Load capacity 600kg Table height min. 400mm - max. 1010mm Dimensions LxWxH approx. 1900 x 740 x 400mm Platform L 1900 x W 740mm Roller diameter 125mm Weight approx. 190kg G&STÜ-6100600
Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Work Table, Clamping Table, Welding Table, Machine Table GEORG 5400 mm Box profile: 160 x 90 mm Height: 760 mm Center groove over 8 profiles 40 x 25 mm Dimensions: 6350 x 1000 x 760 mm Weight approx. 4 ton
Angle table with adjustable attachment, clamping bracket, T-slot plate WMW - Consists of 2 parts. Clamping surface: 1600 x 850 x 680 / 760 mm Number of grooves: 6 Groove width: 20 / 38 mm Hole spacing at the base: 130 mm Dimensions: 1600 x 850 x 680 / 760 mm
Universal clamping table, swivel, tilt and swivel table, T-slot plate PAGUS clamping surface: 630 x 270 mm 5 grooves groove width: 12 mm table can be tilted back and forth from 90°, tilted back and forth by 30° table can be tilted left and right by 15° and swivelled to the left and right by 45° New !' Dimensions: 650 x 290 x 290 mm
Magnetic clamping table, electric PAGUS Ø 500 mm outer diameter: Ø 500 mm Operating voltage: 24 V DC current consumption: 6,00 mm 2 A Insulating surface: Ø 55 mm Contact diameter: Ø 16 mm Contact spacing: 28 mm Flange diameter: Ø 235 mm Bolt circle diameter: Ø 270 mm 4x Threaded hole: M16 x 2.0, depth: 28 mm used, tested ! Dimensions: 500 x 500 x 90 mm
Cast iron control/tracing marble Length: 1700 mm Width: 700 mm Thickness: 230 mm Height on feet: 940 mm Weight: 0,8 T
Light table, 2x 18W. Adjustable positions. In very good and clean condition.
Auction-ID: A7-50745-18
table length: 1200 mm table width: 700 mm table height: 900 mm table load capacity: 250 Kg weight of the machine ca.: 36 Kg dimensions: 1,2 x 0,8 x 0,85 m Siegmund workbench incl. accessories - consisting of screw clamps, manual clamping bolts, surface clamping bolts and angle bracket - Frame made of aluminum profiles - Working height 900 mm - Surface made of aluminum table profiles - Drill hole Ø 16 mm - Hole spacing 50 mm - Hexagon groove HX8 - Hexagon groove distance 50 mm - When clamping aluminum parts, the bolts may only be tightened hand-tight. - For clamping: Manual clamping bolt 160514 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Technical description : CLAMPING/ MOUNTING TABLE - Length 2600mm - Width 1500mm - Height 250mm
heavy 40s Gillardon with cross table
Coordinate table - rotatable BAZUS Table size 700 x 400 mm Clamping area 330 x 580 mm 3 T-slots 12 mm Travel distance approx. 400 mm Scaling 0.05 mm 1 spindle rotation = 4 mm swivel 360° with locking mechanism Overall height 195 mm Max. table load approx. 100 kg max. working pressure approx. 500 kg Dimensions L - 850 x W - 400 x H - 195 mm Weight approx. 172 kg original packaging - year of construction estimated - New - unused - - 1 piece in stock -
table length:630 mm table width:200 mm no. of flutes:3 weight of the machine ca.:55 kg
weight of the machine ca.:50 kg dimensions of the machine ca.:660 x 460 x 280 mm no. of flutes:3 groove width:14/24 mm surface area:570 x 460 mm
Specifications: Clamping plate dimensions: 2050 x 1000 mm Panel thickness: 170 mm T-slots: 15 / 25 mm Dimensions (length x width x height): approx. 2050 x 1000 x 170 mm The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
Key data: 400 mm, 40 mm
- incl. key Specifications - Table diameter: 400 mm - Table height: 40 mm - Rotation range: 360° - Pan/tilt range: 0 - 90 ° - Max. load capacity (horizontal table): approx. 200 kg - Max. load capacity (table vertical): approx. 100 kg - Dimensions mounting plates horizontal/vertical: 375 x 500 / 375 x 255 mm - Dimensions rotary table WxHxD (table horizontal): approx. 570 x 280 x 500 mm - Net weight: approx. 200 kg
Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run
turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 290 mm turning diameter over slide rest: 170 mm turning length: 750 mm turning speeds: 75 - 2000 U/min centre height: 145 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK tailstock quill stroke: 80 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 1,3 x 0,75 x 0,7 m Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine
Inv. Num. : 8208 Type: W 200 Producer: ŠKODA Created: 1973 Parameters: Maximum spindle speed: 3000 1/min X-axis travel: 4000 mm Y-axis travel: 3150 mm Travel distances Z-axis: 2000 mm W-axis travel: 1600 mm Spindle diameter: 200 mm
Inv. Num. : 8224 Type: W 100 Producer: TOS Created: 1972 Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Taper: Morse Spindle diameter: 100 mm Equipment: Front panel DRO NEWALL
Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm
Cast iron bed Length: 3650 mm Width: 1370 mm Thickness: 150 mm 11 T-slots - dimensions 32 x 18 mm Slots spacing: 125 mm Assembly in 2 parts Dimensions of each part: L 1820 mm x W 1370 mm x H 150 mm Total height on base 875 mm Weight: approx 4 T
Axial Dry Cooler, Güntner GFH090.2A/3-M(D) Manufacturer: Güntner. Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 650kW Air temperature: 35º C. Fans: 3 pieces, 2.8kW, 400V, 50Hz, 3 conductors Connection: Inlet 1x DN80, Outlet 1x DN80 Dimensions: LxWxH = 6100x1150x1460mm Weight: 1550kg Sound pressure level: 57 dB(A) 10m distance, Year of manufacture: 2018 Condition: Good, leakage and fans tested Jenbacher, Dry cooler, Dry air cooler, Emergency cooler, drycooler, Glycol cooling water
Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit prices for glue pots with bayonet adapter: for one gluing unit: EUR 7,770.00 for two gluing units: EUR Price on request Delivery time: approx. 4 weeks
description: The rejection table can be used after any kind of bottle control (filling height control, empty bottle inspector). The defect bottles will be rejected with a pusher. The station was connected to a Heuft filling height control. Puscher or Inspector are not included in this position. availability: in stock width: ca. 1000 mm length: ca. 3800 mm Installation dimension: ca. 3800 mm x 1600 mm transport size: ca. 3800 x 1600 mm Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy ma ...
Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995
Manufacturer: Hydraulikhubtisch, Year: ca.1995, Lifting power kg: 2000, Length mm: 3200, Width mm: 1400, Lifting hight approx. mm: 1800, Total hight mm: ca 450, Hand switch: yes, Year :ca.1995
Manufacturer: Unbekannt, Year: ca.1990, Lifting power kg: ca.3000, Length mm: 5000, Width mm: 1200, Lifting hight approx. mm: ca.1200, Total hight mm: 400, Safety strip: yes, FREE TEXT: Maschine wird gereinigt Lackiert Steuerung erneuert, Year :ca.1990
Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1999, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Compressed air bar: 155, Wight approx. kg: 1400, Year :1999
Manufacturer: Trepel, Type: EN 10/10/0, Year: 2002, Lifting power kg: 1000, Length mm: ca 1400 , Width mm: ca 800, built-on roller conveyor: no, Year :2002
Manufacturer: Hebebühne, Lifting power kg: 3000, Length mm: 4000, Width mm: 1250, Total hight mm: ca.400, Safety strip: yes, built-on roller conveyor: no, Total power kW: ca.3,
Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: variable The scope of delivery includes: 01x Workbench frame, new Material colour: grey Workbench frame legs: Heights adjustable 01x Worktop, new Material: Multiplex Material thickness: 38 mm Overall width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
2 independently working cutting bridges 2 working zones (1750x1000mm each) High-performance vacuum turbine X servo drive; Y and Z axes 2 high-luminosity projectors Windows 7 operating system Calculator with CNC interface, modem and Ethernet card
spindle diameter: 125 mm x-travel: 1.500 mm y-travel: 1.250 mm z-travel: 1.000 mm w-travel: 550 mm table surface area: 1.000 x 1.250 mm workpiece weight: 6.000 kg quill stroke: 550 mm tool taper: ISO 50 number of spindle speeds: 5-3.700 U/min. max. torque: 2012 Nm feed speeds: 1-6000 (x-Achse) mm/min feed speeds: 1-6000 (y-Achse) mm/min feed speeds: 1-6000 (z-Achse) mm/min rapid traverse x/y/z: 15/ 15/ 15 m/min dimensions of the machine ca.: 7,51 x 5,07 x 3,33 m : 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
25 € 
