rotary kiln used for sale

Kiln 1200C inner dimensions 1x1x2m 2 heating zones auto door Fours pour la fonderie Fours pour la forge et le matriçage Fours pour les traitements thermiques Equipements périphériques Fours pour verres feuilletés Fours Basse température Fours à passage continu Fours céramique Fours à creuset pour fusion et fusion-maintien des métaux non ferreux Creusets pour fonderie Fours pour cuisson et décirage de carapaces de fonderie à cire perdue Fours de forge standard Fours à creuset Fours Haute température Fours de laboratoire Fours de trempe Fours de recuit chauffé à l'électricité chauffé au gaz four standard chauffés à l'électricité four standard chauffés au gaz Fours à longerons mobiles Fours de thermoformage Fours de séchage Fours de polymérisation Fours pour le verre Fours Fours à sole tournante de bombage Fours de revenu  ...

Oven 650C inner1.5x1.5x2m t max 650 Celsius could be various inner size and temperature range PLC Top quality Wärmebehandlungs Kammeröfen Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken- und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haub ...

furnace oven kiln 1200 1x1x2m bogie PLC Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammhärten Anlassen / Glühen Bainitisieren Entspannen / Anlassen Anlassofen Aushärteöfen Chargen trockner Drucksinteröfen Durchlauföfen Durchlauftrockner Elektroindustrieofen Elektroöfen Erwärmungsöfen Gasöfen Gastrockner Industrieöf en Industrietrockner Kammeröfen Kammertrockenöfen Kammertrockner Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Trockenöfen Trockner Tro ckneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Durchlauföfen Herdwagenöfen Kammeröfen  ...

SECOND-HAND DRYING KILN COPCAL - traditional heating system - capacity 70/80 mc - dimensionst mt 9,5x6x5+1H

Shuttle kiln for the production of Hand Formers Unit No 5: 5.8m3 shuttle kiln, year 2017, USD 30,700 Unit No 6: 7.7m3 shuttle kiln, year 2018, USD 56,500 Unit No 37: 9.0m3 shuttle kiln, year 2020, USD 74,100 Unit No 24: 7.7m3 shuttle kiln, year 2021, USD 97,700 Unit No 23: 9.0m3 shuttle kiln, year 2021, USD 107,400 For further inquiry, can email to: sywee@topglove.com.my

Manufacturer: Trockenkammer Lauber /Mühlböck Wood Drying System Year of Manufacture: 2012 Type of Machine : Wood Drying System TECHNICAL DATA PER UNIT HOT WATER HEATING - Heating capacity: 283,800 kcal/h = 330 kW - Flow temperature: 95 °C - Water volume: 11 m³/h - Pressure loss: 3 mWS = 0.3 bar - Connections (supply/return): DN 50 / DN 50, PN10 SPRAY SYSTEM - Water consumption: 68 l/h - Temperature: T = +4 °C - Pressure: p = 3.0 bar - Connection: R 1/2" - Spray nozzles: 5 pcs FANS - Quantity: 10 pcs - Power per fan: 1.1 kW - Voltage: 400 V STACKING DIMENSIONS - Length (L): 2 × 6.0 m + 1.00 m - Width (W): 2 × 1.2 m + 1 × 0.2 m - Height (H): 3 × 1.2 m + 3 × 0.1 m GROSS STACKING VOLUME - 103.7 m³ TECHNICAL DATA PER CHAMBER HOT WATER HEATING - Heating capacity: 410 kW - Flow temperature: 95.0 °C - Water flow rate: 24 m³/h - Pressure loss: 3.0 mWS = 0.3 bar - Flow ...

Manufacturer: Trockenkammer Lauber /Mühlböck Model: OLSF-2x1,20-3x1,20-13,00 Year of Manufacture: 2004 Type of Machine : Wood Drying System TECHNICAL DATA PER UNIT HOT WATER HEATING - Heating capacity: 283,800 kcal/h = 330 kW - Flow temperature: 95 °C - Water volume: 11 m³/h - Pressure loss: 3 mWS = 0.3 bar - Connections (supply/return): DN 50 / DN 50, PN10 SPRAY SYSTEM - Water consumption: 68 l/h - Temperature: T = +4 °C - Pressure: p = 3.0 bar - Connection: R 1/2" - Spray nozzles: 5 pcs FANS - Quantity: 10 pcs - Power per fan: 1.1 kW - Voltage: 400 V STACKING DIMENSIONS - Length (L): 2 × 6.0 m + 1.00 m - Width (W): 2 × 1.2 m + 1 × 0.2 m - Height (H): 3 × 1.2 m + 3 × 0.1 m GROSS STACKING VOLUME - 103.7 m³ TECHNICAL DATA PER CHAMBER HOT WATER HEATING - Heating capacity: 410 kW - Flow temperature: 95.0 °C - Water flow rate: 24 m³/h - Pressure loss: 3.0 mWS =  ...

A heating and drying oven Horo is available. Connected load: 12.5kW. Max. temperature: 120°C. Heating power: 12kW. Volume: 2736l. Documentation available. An on-site inspection is possible.

Good condition Auction-ID: A7-45427-66

Plant for kilning green malt. Hot air is generated at a steam-heated heat exchanger and passed through the kiln by means of a fan. It is possible to regulate the proportions of fresh and circulating air by means of flaps and a bypass. Control takes place by means of a control cabinet., Additional title: vertical vessel; year of manufacture approx. 2005, Kiln dry capacity: 200 Kg, Width: 1,1 m, Height: 3,2 m, Features: Ventilator (Pollrich Ventilatoren GmbH, 2004), air-shut-off valves (EBRO Armaturen GmbH), circular vessel with Optima strauber-sieve bottom (Steinhaus GmbH), insulated hot water vessel Control cabinet

Almost unused used CNC rotary axis from ISEL Automation ! By exception, a competitor's product. From a payment of a complete CNC fraes machine from ISEL due to the switch to a T-Rex CNC Fraes machine from CNC-STEP Top exact product, solid, stable processing. A few years old but top in shot. 100mm Holder for chuck 23mm Throughlet Height 320mm Width: 21 0mm Stabile cast aluminum discharge 4 Screw fasteners on the foot step motor 6.0 Ampere ! Controltable up to 48 volts Please also note our other CNC machines offers;

Rotary indexing table, rotary indexing table with 16 stationsRotary transfer machine + hydraulic press TOXRundtaktautomat Special machine with several assembly stationsProduction and assembly system in rotary transfer processFrom special machine manufacturer AKE-technologies GmbHSerien number: 01-45-064Order number: 11111Year of construction: 2012- large rotary indexing table WHITE type TC500, with 16 stations- pressing station with TOX powerhouse- vibation conveyor- conveyor belts- test stations - some stations still open

Type: 62416, rotary wheel valve with pre-valve flat slider, drive via spur gear motor with 3 kW / 42 rpm. Little ran.

Type: 9.3-456, Y.O.M.: 1991, inlet: 400 mm x 400 mm, overhauled, without motor.

Stainless steel pumps, Hilge, Fristam, various versions and sizes

Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new

Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale

1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

Hydraulic Type Manufactured by Angelo Cremona Maximum Diameter 800 mm Minimum Diameter 120 mm

; very good

; see pictures

Kat. No. 12-1170 in a very good condition Measurements and weight: LxBxH: 140 x 64 x 117 cm weight: 160 kg type: SRZ4 / 055LD Serial No. 279503 4,4 kW DN 65 130 l/min., 7800 l/h 7,5 bar For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1120 in very good condition Type 125VT-DS Model: HTIRM Size: NW 65 Serial-No. 1251149 Original Price: Euro 30.000,- Measurements and Weight: LxWxH: 166 x 52 x 102 cm Weight: 330 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

This rotary valve was used, was only used for spare parts storage for a foreign project and was therefore never in use. The rotary conveyor thus has no operating hours and is in a new condition. The rotary valve, with square inlet, is suitable for the controlled supply and dosing of powdered and granulated bulk materials from silos, funnels, pneumatic conveyor systems, filter systems and cyclones. Name: Rotary valve Manufacturer: Sunds MDF Type: LAF-200 Year of construction: 2010 Material: Normal steel Drive motor: 11 kW Dimensions: L 3400 x W 2200 x H 2370 mm Empty weight: approx. 4500 kg Speed: 1475 / 22 Condition: Used Tech. Documentation: No Note: Inlet L: 1980 mm x W: 1180 mm, Outlet L: 2180 mm X W: 1000 mm, 7 chambers. The rotary valve has no operating hours and is in a new condition. Price: On request

Cat. No. 12-1175 in very good condition Measurements and Weight: LxWxH: 125 x 66 x 92 cm Weight: 195 kg Model: HTIRM Type: 40VT-DS NW 50 Pressure: 10 bar Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Cat. No. 12-1165 in very good condition Measurements and Weight: LxWxH: 136 x 44 x 113 cm Weight: 125 kg 3 kW 60 l/min., 3600 l/h 2 bar DN 65 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Unused Düchting Centrifugal Pump Type HK200x6 Year of construction 2015 Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 300 m³/h H 490 m N 1480 1/min P 560 kW Further Düchting pumps in stock Applications: Conveyance of contaminated, chemically neutral or aggressive liquids with up to 10% solids content. Main water drainage in mining Secondary water drainage and mine air cooling in mining Pressure boosting systems in industrial processes Water supply and water treatment plants Condensate conveying Mineral fertilizer industry Oil & Gas Applications LHK125x6 HK150x11 Q150m³/h H730m n1485 1/min P430kw HK250 HPXU100x10 Q90m³/h H250m n1485 1/min P100kw HK150x5 Q163m³/h H325m n1485 1/min P210kw HK150x9 Q220m³/h H435m n1485 1/min P435kw HPXU150-200x5 Q150m³/h H665m n1485 1/min P415kw HK200x6 Q480m³/h H470m n1485 1/min P792kw HK200x4 Q500m³/h H265m n1485 ...

FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0.0, Fibro, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. Technical data - SEW Eurodrive worm gear motor SA57 DR63M4/BR/TF, N=1320/35/min., i=38,23, 0,18KW, 230/400V, incl. brake 400V, - FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0, Fibro, - pitch 12, direction of rotation left u right, - All technical details see photos Attention: We also have the mechanically machined rotary table top made of aluminium D1800mm x 25mm thick, we are happy to offer this to you. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. ...

Cat. No. 12-1125 in a very good condition Model: HTIRM Serial-No. 401543 Type: 40VT-DS NW 50 Pressure: 10 bar Measurements and Weight: LxWxH: 140 x 45 x 103 cm Weight: 140 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Nestro ATEX - Rotary valve Product Name: Rotary Valve Type: 371004 Manufacturer: Nestro Lufttechnik Serial Number: SA0000427 Year of construction: 2022 Condition: used and refurbished Technical details: - new gear oil - New ATEX rotary sealing lips - new colour scheme - Refurbished housing - V nominal: 45 m³/h - Dimensions (L x W x H): 1,870 x 630 x 360 mm - Inlet and discharge opening (L x W): 1,500 x 300 mm - Transport dimensions (L x W x H): 1,870 x 800 x 510 mm (on pallet) - Weight: 165 kg (185 kg on pallet) Engine data: - Voltage: 230/400 V - Current: 4.25/2.45 A - Frequency: 50 Hz - Power: 1.1 kW - cos φ: 0.79 - Torque: 600 Nm - Speed: 1,412/12 rpm Price: on request (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of e ...

Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

working width: 6 m speed of p.t.o. shaft: 1000 U/min numbers of tine holder: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

Probat valve rotary. Manufacturer: Probat GmbH ( Germany ) Type: 46 DN 315 Year: 2005

SACMI line for one and for two component caps, with control video system.

3DYY 9-12PLC rotary transfer machine manufactured in 2020 in China by Zhejiang Mingwen Machine Tool Co., Ltd is designed for high-volume production of e.g. sanitary, gas and hydraulic fittings. The machine, which combines the features of several metal-working machines, performs sequential machining operations on parts placed in special holders, i.e. milling, threading and drilling, in just one working cycle. The finished parts, i.e. fittings, couplings and extensions, are distinguished by their high quality. In this way, the 3DYY9-12PLC transfer machine generates considerable savings, as well as ensuring production efficiency, thanks to its speed and flexibility. The multi-spindle machining center has so far been used to machine 1/2″ internal and external threads from fi 24 x 6k14 brass rod. It took less than 4 seconds to produce 1 external thread. The total weight of the machine is ...

new

Star Ball Mill, Rotor Ball Mill, Centrifugal Ball Mill, Centrifugal Ball Mill Used. Manufacturer: EHINGER IMPIANTI Type: RM 150 Achievable grain sizes: with dynamic classifier: 0-20 μ and 0-300 μ with static selector 0-2 mm Average continuous output approx. 1.6 t of glass per hour Motor SIEMENS 75 kW 738 rpm 400 V Dimensions approx. 2850 x 4100 x 5000 mm original matching dust filter with fan The mill pictured serves only as a sample. The mill for sale is currently being revised. These mills are now being built by Eirich as an OrbitMill for the fine grinding of industrial minerals. Performance data of the Orbit Mill according to the manufacturer as an example of limestone. Air flow rate 13000 m³/h Limestone Throughput d97= 20 μm : 1.6 t/h d97= 40 μm : 3.3 t/h d97= 105 μm : 6.0 t/h The mill pictured was used in glass recycling. Four balls, which a ...