rotary filling machine used for sale

table diameter: 1600 mm table load: 8 t swivelling range: 0 - 130 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1210 bis 2238 mm max. torque on the faceplate: 1200 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table load: 150 kg weight of the machine ca.: 250 kg dimensions of the machine ca.: 800 x 700 x 950 mm Exhibit Machine Producer: BENDMAK Type: SRP 015 Load capacity: 150 kg Load center: 100 mm Eccentricity: 100 mm Rotation of the turntable: 360° Strongest inclination: 90° Input Power: 380 V Rotary motor: 0,18 kW tilt motor: 0,25 kW Speed: 1,4 m/min Slew: 30 sek. Table-Ø: 500 mm T-Slots: 5-72 Height in horizontal rotation: 700 mm Dimensions: Height: 950 mm Length: 800 mm Width: 700 mm Weight: ca. 250 kg Earthing: 300 Amp. Additional information: - adjustable speeds - control panel with 5 m cable - digital speed indicator on the control panel for monitoring the rotation - weld grounding mechanism - mechanical angle indicator - engine brake with air cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 900 mm depth: 900 mm width: 940 mm height: 1.050 mm Disc-Ø: 900 mm Depth: 900 mm Height: 1.050 mm Width: 940 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mm table load: 6 t swivelling range: n x 360 Grad further details please find in the pdf document attached! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 3 m speed of p.t.o. shaft: . U/min numbers of tine holder: . 0 Tooth pack roller, cardan shaft, roller, treble The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Horizontal Clamping surface: Diameter: 300 mm Table height: 149 mm Table load max.: 80 kg Number of T-channels: 8 T-channel width: 10 mm Machine´s weight about: 80.0 kg Dimensions: Length: 510 mm Width: 446 mm Height: 149 mm Various accessories: Chucking clamp Splash guard

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Vertical Clamping surface: Diameter: 300 mm Number of T-channels: 5 T-channel width: 12 mm Dimensions: Length: 700 mm Width: 600 mm Height: 300 mm Various accessories: Tailstock Centre height: 250 mm

Magnetic chuck diameter: 0 mm Grinding height: 0 mm Grinding wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: MAZATROL Technical data Magnetic rotary table: Diameter: 1250 mm Rotation speed: 3.15 - 31.5 rpm Grinding height: 700 mm Table load max.: 2000 kg Grinding wheel speeds fix: 800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 90 kW Total power required: 109 kW Machine´s weight about: 13800 kg Overall dimensions machine: Length: 5060 mm Width: 4740 mm Height: 3300 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Horizontal Clamping surface: Diameter: 500 mm Table load max.: 100 kg Number of T-channels: 6 T-channel width: 14H7 mm Dimensions: Length: 900 mm Width: 800 mm Height: 150 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Universal Clamping surface: Diameter: 250 mm Table height: 100 mm Number of T-channels: 6 T-channel width: 12H7 mm Machine´s weight about: 44 kg Dimensions: Length: 420 mm Width: 340 mm Height: 100 mm

Printing plate deal Grafoteam TAT 48; good condition; we overhaul before delivery; Max. Plate format 1630x1300mm, min.510x400mm; Interface connection possible. Turn around table Grafoteam TAT 48; good condition; will be rebuilt before shipping; max.plate size 1630x1300mm, min.510x400mm; possible to connect with other machine.

USED KORSCH MODELO PH 230 ROTARY PRESS REF.: E6431

Specifications: - max. Load capacity 10000 kg - Flat discs 1400 x 1400 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotary movement infinitely variable 0.05 - 1.2 rpm - Right - + left-hand running controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 2500 mm - E. handheld remote button - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Diameter: 800 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Diameter: 800 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Horizontal/vertical Clamping surface: Diameter: 350 mm Table height: 150 mm Machine´s weight about: 100 kg Dimensions: Length: 500 mm Width: 450 mm Height: 150 mm Various accessories: Tailstock Centre height: 250 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Horizontal Clamping surface: Diameter: 320 mm Table height: 128 mm Machine´s weight about: 80 kg Dimensions: Length: 430 mm Width: 330 mm Height: 128 mm Various accessories: Digital readout number of axis:

Magnetic chuck diameter: 0 mm Grinding height: 0 mm Grinding wheel diameter: 0 mm Spindle power: 0 kW CNC Brand: 0 CNC Model: 0 Technical data Rotary table:diameter: 300 mm Grinding height over table: 245 mm Grinding height over Magnetic chuck: 150 mm Bell grinding wheel: Diameter: 175 mm Spindle speeds: from: 2560 rpm Voltage 50 Hz 3x: 380 Volt Total installed power: 1.5 kW Machine´s weight about: 200 kg Overall dimensions machine: Length: 750 mm Width: 600 mm Height: 1670 mm Various accessories: Wheel trueing attachment Macnetic chuck diameter: 300 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Clamping surface: Diameter: 280 mm Number of T-channels: 4 T-channel width: 12H7 mm Weight: 40 kg Dimensions: Length: 500 mm Width: 350 mm Height: 100 mm Various accessories: Dividing plate

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Clamping surface: Diameter: 120 mm Machine´s weight about: 120 kg Dimensions: Length: 550 mm Width: 450 mm Height: 280 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Clamping surface: Diameter: 120 mm Machine´s weight about: 120 kg Dimensions: Length: 550 mm Width: 450 mm Height: 280 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Clamping surface: Diameter: 380 mm Number of T-channels: 7 T-channel width: 10H7 mm Weight: 80 kg Dimensions: Length: 550 mm Width: 400 mm Height: 150 mm Various accessories: Dividing plate

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 310 mm Number of T-channels: 8 T-channel width: 14H7 mm Machine´s weight about: 50 kg Dimensions: Length: 500 mm Width: 450 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 310 mm Number of T-channels: 8 T-channel width: 14H7 mm Machine´s weight about: 50 kg Dimensions: Length: 500 mm Width: 450 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Clamping surface: Diameter: 300 mm Dimensions: Length: 530 mm Width: 330 mm Height: 140 mm

Magnetic chuck diameter: 0 mm Grinding height: 0 mm Grinding wheel diameter: 0 mm Spindle power: 0 kW CNC Brand: 0 CNC Model: 0 Technical data Rotary table:diameter: 300 mm Grinding height over Magnetic chuck: 95 mm Bell grinding wheel: Diameter: 175 mm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2.2 kW Total installed power: 2.7 kW Machine´s weight about: 540 kg Overall dimensions machine: Length: 1900 mm Width: 1700 mm Height: 1800 mm

Specifications: - max. Load capacity 750 kg - Face disc diameter 750 mm - Hollow continuous spindle 65 mm - Face disc motorically swivel 0 - 90 ° - Rotational movement electr. infinitely variable 0.05 - 2.0 m/min - Right - + Left - Run - E. – Foot switch + hand remote control - Welding current transmission approx. 500 A - Drive 400 V - Table height with horizontal position 1050 mm - 3. Cheek lining - Space requirement approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg

Harro Höfliger rotary table with bottle lay-down device for feeding cartoning machines with bucket infeeds, diameter 1500 mm, infeed/outfeed height from approx. 850 to 1100 mm, opening of table infeed approx. 85 mm, variable speed from approx. 1.25 up to 6.6 RPM

Technical data Clamping surface: Diameter: 350 mm Number of T-channels: 4 T-channel width: 14H7 mm

Technical data Rotary table Dimensions: Length: 600 mm Width: 500 mm Height: 110 mm

Technical data Rotary table Clamping surface: Diameter: 200 mm Number of T-channels: 3 T-channel width: 10 mm Machine´s weight about: 40 kg Dimensions: Length: 400 mm Width: 330 mm Height: 100 mm

Technical data Rotary table Clamping surface: Diameter: 320 mm Number of T-channels: 6 T-channel width: 14 mm Dimensions: Length: 450 mm Width: 400 mm Height: 150 mm

Technical data Rotary table Dimensions: Length: 600 mm Width: 500 mm Height: 110 mm

Technical data Rotary table Horizontal/vertical Clamping surface: Diameter: 320 mm Table load max.: 250 kg Number of T-channels: 4 T-channel width: 14H7 mm Weight: 80 kg Dimensions: Length: 650 mm Width: 450 mm Height: 150 mm Various accessories: Digital readout number of axis:: 1 Fine feed

Technical data Clamping surface: Diameter: 300 mm

Technical data Rotary table Execution: Horizontal/vertical Clamping surface: Diameter: 400 mm Number of T-channels: 6 T-channel width: 14H7 mm Machine´s weight about: 154 kg Dimensions: Length: 514 mm Width: 550 mm Height: 310 mm

Operating hours: 40570 Technical data Rotary table:diameter: 750 mm Max. grinding height: 200 / 235 mm Travel of the fine feed: 300 mm Grinding heads number: 1 Table speeds: stepless from: 7/35 rpm Table load max.: 1000 kg Grinding wheel: Diameter: 470 mm Segments: 8 Dimension of the segments:: 120 x 40 x 80 mm Bell grinding wheel: Spindle speeds:: 24 m/s Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 30 kW Machine´s weight about: 6100 kg Overall dimensions machine: Length: 2800 mm Width: 1300 mm Height: 2400 mm Various accessories: Measuring instrument MARPOSS: E 5

Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 450 mm Table height: 400 mm Machine´s weight about: 300 kg Dimensions: Length: 800 mm Width: 700 mm Height: 400 mm

Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 450 mm Table height: 400 mm Machine´s weight about: 300 kg Dimensions: Length: 800 mm Width: 700 mm Height: 400 mm

Technical data Rotary table Clamping surface: Diameter: 400 mm

Technical data Rotary table Clamping surface: Diameter: 300 mm

Technical data Rotary table Clamping surface: Diameter: 300 mm

Control: HAUSER Technical data Rotary table Execution: Clamping surface: Diameter: 300 mm

Technical data Rotary table Clamping surface: Diameter: 480 mm Number of T-channels: 6 T-channel width: 16H7 mm Dimensions: Length: 800 mm Width: 600 mm Height: 160 mm

Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 320 mm Table height: 150 mm Machine´s weight about: 40 kg Dimensions: Length: 500 mm Width: 400 mm Height: 200 mm

Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 320 mm Table height: 150 mm Machine´s weight about: 40 kg Dimensions: Length: 500 mm Width: 400 mm Height: 200 mm

Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 320 mm Table height: 150 mm Machine´s weight about: 40 kg Dimensions: Length: 500 mm Width: 400 mm Height: 200 mm

Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 320 mm Table height: 150 mm Machine´s weight about: 40 kg Dimensions: Length: 500 mm Width: 400 mm Height: 200 mm

Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 320 mm Table height: 150 mm Machine´s weight about: 40 kg Dimensions: Length: 500 mm Width: 400 mm Height: 200 mm