rotary filling machine used for sale

Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.

I sell a bus machine Prochera DSB. Year of construction 2005. 2-sided spindle fi.30 x max. 220mm. Main motor 1.1 kW. Buerste included. Weight 90 kg. Available the same.

Stephan universal kneader/mixer Model: VM150 Year 1997 Overall dimensions: Width 150 cm, length 100 cm, height 150 cm Power: 2.5 kW Revolutions per minute: 1,400 Mixing bowl dimensions: Diameter 65 cm, height 50 cm

sheet width: 2020 mm plate thickness: 2 mm distance between columns: 2030 mm bending angle max.: 135 ° total power requirement: - kW weight of the machine ca.: 1,22 t dimensions of the machine ca.: 2,5 x 1,0 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: - Automatic workpiece blocking pneumatically controlled - Machine for the execution of slots of different lengths and depths for window parts, folding shutters and doors

4000 x 2000mm 4000w LOW HOURS

ALREADY SOLD Hylectric 90ton HL90 RS45/42 for sale ask for details 400volts 50hz

Fax machine TELEKOM T-Fax 8500

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax. Turning Length300 mmMax machining diameter320 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmWeight approx.8000 KgMovements X / Z210/810 mmCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

CNC Bedmilling Machine Make: SACHMAN Model: RP 3 x 1800 mm Year: 1996 ( only 5000 hours ) Control: Heidenhain TNC 407 Table: 2000 x 750 mm Speeds: 22 - 3500 rpm Motor: 15 kW Oil cooled universal TVK millinghead

Tube laser Bodor T230 Laser power: 1 kW Round tubes 20 mm to 230 mm Square tubes 20 x 20 mm to 160 x 160 mm Cutting of welded assemblies Year of construction 2017, but installed and put into operation in 2018

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax machining diameter320 mmMax. Turning Length300 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmMovements X / Z210/810 mmWeight approx.8000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgPackage Mill / TurnPackage Mill / Turn NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in C-axis direct drive, speed max.1,200 rpm Integrated balancing system Motorspindle 20-20,000 rpm power 35/25 kW (40/100% ED) tool taper HSK-A63 according D ...

A used bread slicer Treif Pegasus 2602 from 1997 is currently for sale and immediately available in our warehouse in Bielefeld. Bread slicer Treif Pegasus 2602 - Bread slicer without oiling - for long loaves of bread - completely in stainless steel - with cress knife - can be driven on castors - Year of construction 1997

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

Vial blister machine Manufacturer: Uhlmann Model No.: UPS4 Year of Make: 2000 Serial Number: 460 Bottles Carton Packaging 2 bottle feeders PACCONTROL PCL Production Capacity: • 15 to 50 cycles/min up to a punching depth of 12 mm • 15 to 40 cycles/min up to a punching depth of 28 mm Maximum feed length: 222 mm Format range: longitudinal 220mm x transverse 284mm Actual format: • Tray for 10ml ampoule (Ø17.5×87) and 10ml vial (Ø15×50), tray dimensions (LxWxH): 99x54x26 • Tray for five 10ml vials (Ø24×50), tray dimensions (LxWxH): 146x66x26 • Tray for a 10ml vial (Ø24×50), tray dimensions (LxWxH): 99x54x26 Thermoforming film diameter: • On the machine : 400mm • On bobbin holder : 800mm Coil diameter of the lidding film: max. 300 mm Min/Max Thermoforming Film Thickness: 0.15/0.5mm Width of the sheath material: • Thermoforming film: 145 to 300 m ...

Machine Details Stock-No. 1105-03435 Type of machine Bed Type Milling Machine - Universal Make LAGUN FBF 1200 Type HEIDENHAIN TNC 335 Year of manufacture 1991 Type of control CNC Storage location HAGUENAU Country of origin SPAIN Delivery time IMMEDIATELY Freight basis EX STOCK Price Technical details x-travel 1100 mm y-travel 600 mm z-travel 600 mm surface area 1200X 550 mm turning speed range: 50-3000 TR/MIN power capacity 20 kW control TNC 355 HEIDENHAIN Additional information CNC CONTROL HEIDENHAIN TNC 355 IN PERFECT WORKING CONDITION

Semi-automatic

I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !

CONTROLS   PLC SPECIFICATIONS THROUGH FEED GRINDING MACHINE   Working width: 1500 mm TRANSPORTATION BELT   speed min.: 0.3 m/min   speed max.: 5 m/min ELECTRICAL SPECIFICATIONS   mains power supply: 28 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 4000 kg

Control Heidenhain TNC620 Travel X/Y/Z [mm] 4100/420/300 Tool pick-up SK40 General: Designation Autom. Profile Machining Center AP-B 4000 Machining length 4,000 mm Travel X/Y/Z 4,100 / 420 / 300 mm Machine hood: Machine hood can be opened pneumatically upwards Operation: Operating terminal can be moved over the length of the machine Control: CNC control Heidenhain TNC 620 Additional control: Heidenhain handwheel HR130 Table specification: T-groove strips size 16, mounted longitudinally to the X-axis Bearing surface: 4,200 x 420 mm Spindle: Engine power: 14 KW S1/19 kW S6 Engine cooling: water with additive Speed range: 100 to 14000 rpm Torque: 74 Nm S1 / 100 Nm S6 Drilling capacity in St 60/Alu: 25 mm/30 mm Thread in St 60/Alu: M20/M30 Tool magazine: Tool holder: SK 40 Tool clamping system: Spring package pull-in force 9 KN Version: 12-fold disc magazine Cha ...

Flatpile Feeder, 4 Pockets, Delivery

1 Clamp Perfect Binder, Delivery Belt Year: ca. 1993

with B200/25 and Number: 6852884, Shrink Wrap / Foil Sealing

We can offer Arburg injection moulding machines, 220,270,420 etc.all goog condition.Serious buyers contact us. We have many brands, models,years machines, tell me what you need seriously!

We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 40. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us. We have many brands and models machines, tell me what you need seriously!

! ENTER THE + WORLD! Conventional TSCHUDIN HTG 310 + with innovation and protection packages

Shrink Wrap/Foil Sealing

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230V, noise level:

LAGUN NG- L 1800 CNC universal milling machine LAGUN Machine Tools S.L.- Spain Control HEIDENHAIN TNC 360 X-axis 2300 mm Y-axis 650 mm Z-axis 600 mm Table 1900 x 550mm Table load 2,5t Spindle speed stepless 50 - 3000 rpm Spindle taper SK 40 Spindle motor 9.5kW Total power 15 kW Feeds -stepless- 0 - 5000 mm/min Rapid traverse 10m/min Tool changer 20 tools Weight ca. 6,5 t Accessories: 3x Vices, about 10 tool holders, touch probe, others

We can offer a Krauss Maffei injection moulding machine, manufactured in 2017, short time working, like new one, serious buyer contact us. We have many brands, models,years machines, tell me what you need seriously!

I-beam section - upend: 100 x 20 (d 2100) mm tube diameter max.: 100 x 3 (d 3000) mm L-beam: 80 x 80 x 8 (d 2000) mm square material: 50 x 25 x 2 (d 600) mm bar material - diameter: 60,0 (d 1000) mm I-beam section - flat steel: 120 x 30 (d 600) max. 140 mm tool taper: 80,0 turning speeds: 4,2 U/min weight: 1600 kg dimensions: 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according  ...

Carbide coating machine, carbide coating device -Manufacturer: Carbumatic, hard metal coating machine -Type: unfortunately without a type designation -Voltage: 3 x 220-380 V / 50 Hz -Power: 0.4 kWA -Transport dimensions: 470/470/H380 mm -Weight: 49 kg/piece

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 081-BIO – 19.8 kW Manufacturer: MTA S.p.A. CYGNUS TECH CYT 081-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 19.8 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 3.43 Head available bar: 2.03 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 10 Max. Current (A) 19 Starting Current Circuit (A) 102 Protection class: IPX4 Dimensions: Length mm 1960, width mm 810, height mm 1203 Weight kg 457 Connection R 1"1/4 Serial No.: 2200430168 Year of construction 2025 Condition: Optical 1, Technically ok (Bearing Machine)  ...

The "Epoch TM" extrusion casting apparatus (wide slot nozzle) has been designed and constructed for the thermoforming of polypropylene (heavy films). Operating fluids PA12, PP For other materials, contact must be made in advance with the manufacturer in order to check the processability. Specifications: Weight 839 kg. ; Power supply 230 V; number of zones cast body 14; Encapsulation block 2; KW total: cast body 21.9 KW; Auto Gauge 730 KW; Cast lip heating 3.4 KW; Additional equipment: internal edge boundaries with fixed length

Wind machine, plus fan

NOWO NOWOROLL ball fibre machine was built in 1998 in Finland by NOWO Textile Machinery. It is an extremely advanced system designed for the efficient production of polyester fibre balls made of polyester fibre with a length of 32 mm. The fibre ball is an excellent filling for bedroom cushions, furniture pillows, plush toys and other textile products. It is also an ideal ingredient for creating blends with polyurethane foam. The production process begins with careful weighing and opening of the polyester fibre. The fibre prepared in this way is transported by a fan through a piping system with a humidification system directly to the balling module. Here, the process of twisting the fibre into a ball is performed. The finished polyester fibre balls fall into a chamber from which they are extracted by a bagging machine, which packs the product in polypropylene bags. The NOWOROLL ball fi ...

Diosna Wendelkneter Type: W240 A Completely overhauled and repainted Spiral kneader extendable for max. 240 kg dough or for max. 150 kg flour 2 speeds slow and fast 2 automatic timers 2 spiral spiral steel / nickel-plated Spirals are made of steel and completely nickel-plated with plier lock Boiler is driven by friction wheel drive Head hydraulically lifting and lowering with switch box with 3 stainless steel boilers / Refurbished Vat capacity 355 litres Machine and boiler were completely overhauled and repainted Height: 180cm Width: 110cm depth: 150cm

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

BUHLER Polishing / pearling machine DSRH 15 1V 5S for seeds, groats LIKE NEW For rice, barley, wheat, spelt... Bargain..

Auction-ID: A1-45977-34

Auction-ID: A1-45977-91

Auction-ID: A1-45977-269

In wooden box Auction-ID: A1-45977-181

Bakon cream blower Type: Top Cream 530 Year of construction: 2011 Stainless steel digital control Temperature indicators 1.5kW As good as new condition Height: 115cm Width: 50cm Depth: 64cm